Enraizamento de estacas de Camellia sinensis L. em função da época de coleta de ramos, genótipos e ácido indolbutírico

Objetivou-se avaliar o efeito da época de coleta de ramos, genótipo e concentração de ácido indolbutírico (AIB) no enraizamento de estacas de Camellia sinensis L. Para tal, foram coletados ramos dos genótipos IAC 259, F 15 e Comum, em Pariquera-Açu, SP, Brasil, no inverno, primavera, verão e outono. em seguida, foram preparadas estacas que foram tratadas com AIB (0, 2.000, 4.000, 6.000 e 8.000 e 10.000mg L-1), plantadas em vermiculita e mantidas em viveiro sob 70% de sombreamento e irrigação periódica. O delineamento experimental foi o inteiramente casualizado, em esquema fatorial 4x3x6 (quatro épocas, três genótipos e seis concentrações de AIB), com quatro repetições de oito estacas. A época ideal para se coletar os ramos foi o inverno. Estacas coletadas no inverno apresentaram mortalidade média de 41%, enquanto nas estacas vivas o enraizamento médio foi de 66%, influenciado apenas pelo genótipo, todas apresentaram brotações e apenas 32% apresentaram calos. O AIB influenciou o número e o comprimento das raízes formadas em estacas no inverno. Na primavera, apesar da menor mortalidade (31%), apenas 0,34% das estacas vivas apresentaram raiz e 49% brotação, enquanto 97% das estacas apresentaram calo. No verão e outono a mortalidade das estacas foi extremamente alta, respectivamente, 93 e 81% das estacas.

Estudo da incorporação de cascalho proveniente da perfuração de poços de petróleo em formulações para tijolos de solo-cimento

The present work is to study the characteristics and technological properties of soil-cement bricks made from binary and ternary mixtures of Portland cement, sand, water, with or without addition of gravel from the drilling of oil wells, which could be used by industry, aiming to improve its performance and reduce cost by using the residue and, consequently, increasing its useful life. The soil-cement bricks are one of the alternatives to masonry construction. These elements, after a short curing period, provide compressive strength similar to that of solid bricks and ceramic blocks, and the higher the resistance the higher the amount of cement used. We used the soil from the city of São José do Mipibu / RN, the banks of the River Baldun, cement CPIIZ-32 and residue of drill cuttings from oil wells drilling onshore wells in the town of Mossley, RN, provided Petrobras. To determine the optimum mix, we studied the inclusion of different residues (100%, 80%, 70%, 60% and 50%) where 15 bodies were made of the test piece. The assessment was made of bricks made from simple compression tests, mass loss by immersion and water absorption. The experimental results proved the efficiency and high utilization of the waste from the drilling of oil wells, making the brick-cement-soil residue with a higher strength and lower water absorption. The best result in terms of mechanical strength and water absorption for the ternary mixture was 10% soil, 14% cement and 80% residue. In terms of binary mixtures, we obtained the best result for the mix-cement residue, which was 14% cement incorporated in the residue

Avaliação da incorporação combinada dos resíduos de cascalho de perfuração de poço de petróleo e de polimento do porcelanato em cerâmica vermelha

Among the industries, those that produce ceramic porcelain for use in construction industry and oil, during the exploration and production period, play an important role in the production of waste. Much research has been carried out both by academia and the productive sector, sometimes reintroducing them in the same production line that generated them, sometimes in areas unrelated to their generation, as in the production of concrete and mortar for the construction, for example, but each one in an isolated way. In this research, the aim is to study the combined incorporation of the waste drill cuttings of oil well and the residue of the polishing of porcelain, generated in the final stage of finishing of this product in a clay matrix, for the production of red pottery, specifically bricks, ceramic blocks and tiles. The clay comes from the municipality of São Gonçalo, RN, the drilling waste is from the Natal basin, in Rio Grande do Norte, and the residue of the polishing proceeds from a ceramic porcelain of the State of Paraíba. For this purpose, we used a mixture of a plastic clay with a non-plastic, in a ratio of 50% each, settling formulations with the addition of these two residues in this clay matrix. In the formulations, both residues were incorporated with a minimum percentage of 2.5% and maximum of 12.5%, varying from 2.5% each, in each formulation, which the sum of the waste be no more than 15%. It should be noted that the residue of the polishing of ceramic porcelain is a IIa class (not inert). The materials were characterized by XRF, XRD, TG, DTA, laser granulometry and the plasticity index. The technological properties of water absorption, apparent porosity, linear shrinkage of burning, flexural tensile strength and bulk density were evaluated after the sintering of the pieces to 850 °C, 950 °C and 1050 °C, with a burning time of 3 hr, 3 hr and 30 minutes, and 3 hr and 50 minutes, respectively, with a heating rate of 10 °C/minute, for all formulations and landing of 30 minutes. To better understand the influence of each residue and temperature on the evaluated properties, we used the factorial planning and its surfaces of response for the interpretation of the results. It was found that the temperature has no statistical significance at a 95% of reliability level in flexural tensile strength and that it decreases the water absorption and the porosity, but increases the shrinkage and the bulk density. The results showed the feasibility of the desired incorporation, but adjusting the temperature to each product and formulation, and that the temperatures of 850 °C and 950 °C were the one that responded to the largest number of formulations

Cinemática de partículas em fluidos de viscosidade variável com o tempo e sua aplicação na construção de poços de petróleo: avaliação durante paradas operacionais

The new oil reservoirs discoveries in onshore and ultra deep water offshore fields and complex trajectories require the optimization of procedures to reduce the stops operation during the well drilling, especially because the platforms and equipment high cost, and risks which are inherent to the operation. Among the most important aspects stands out the drilling fluids project and their behavior against different situations that may occur during the process. By means of sedimentation experiments, a correlation has been validated to determe the sedimentation particles velocity in variable viscosity fluids over time, applying the correction due to effective viscosity that is a shear rate and time function. The viscosity evolution over time was obtained by carrying out rheologic tests using a fixed shear rate, small enough to not interfere in the fluid gelling process. With the sedimentation particles velocity and the fluid viscosity over time equations an iterative procedure was proposed to determine the particles displacement over time. These equations were implemented in a case study to simulate the cuttings sedimentation generated in the oil well drilling during stops operation, especially in the connections and tripping, allowing the drilling fluid project in order to maintain the cuttings in suspension, avoiding risks, such as stuck pipe and in more drastic conditions, the loss of the well

Multiplicação do nematoide Meloidogyne paranaensis e velocidade de enraizamento de estacas caulinares em sete espécies de plantas medicinais

Dissertação (mestrado)—Universidade de Brasília, Faculdade de Agronomia e Medicina Veterinária, Programa de Pós-Graduação em Agronomia, 2016.

Germinação de sementes e otimização de técnicas de micropropagação de umbuzeiro (spondias tuberosa, arr.) anacardiaceae

The brazilian-plum (Spondias tuberosa, His) is a tropical fruit tree that has been consolidated in the market for agribusiness processing, due to its characteristic flavor of fruit. Accordingly, studies to optimize the propagation of plants are necessary for production of seedlings with agronomic and quality assurance measures. This study aimed at determining the efficient techniques for uniform seed germination, as brazilian-plum seed present mechanical dormancy, and establish optimal culture media for multiplication of shoots from the in vitro micropropagation. Firstly, in a greenhouse at the Universidade Federal do Rio Grande do Norte, was evaluated the influence of different methods of breaking dormancy in the emergence of seedlings of brazilian-plum and speed of germination (IVG) of seeds. After 60 days of cultivation, it was found that splay in the distal portion of the seed was the best treatment, with rates of 85.33% in germinability and 3.415 of IVG, compared with the treatment of seed-soaking in water for 12h + humus and the control group. Subsequently, new sources of seedling explants were obtained in studies of tissue culture. Laboratory of Plant Biotechnology that the university, was used stem apex, nodal segments and internodes in search of decontamination with various concentrations of calcium hypochlorite [Ca(OCl)2] and micropropagation, inoculating them in half WPM (1980) with various concentrations of 6-benzylaminopurine (BAP). We used 10 sample units with three replications for different concentrations of [Ca(OCl)2], BAP and explants type. After thirty days, which was observed for the control of contamination, during the establishment in vitro, concentrations of [Ca(OCl)2] between 0.5% and 2.0% were effective in combating exogenous contamination of the apex. In nodal segments and internodes, concentrations of [Ca(OCl)2] between 1.0% and 2.0% and 1.5% and 2.0% were respectively, sufficient to reduce the percentage of losses in these infestations explants. For micropropagation, the culture medium supplemented with 0.1 mg.L-1 BAP promotes better development of multiple shoots per explants from nodal segment. However, success does not get to shoot training in internodal segment

Network Construction and Graph Theoretical Analysis of Functional Language Networks in Pediatric Epilepsy

This dissertation introduces a new approach for assessing the effects of pediatric epilepsy on the language connectome. Two novel data-driven network construction approaches are presented. These methods rely on connecting different brain regions using either extent or intensity of language related activations as identified by independent component analysis of fMRI data. An auditory description decision task (ADDT) paradigm was used to activate the language network for 29 patients and 30 controls recruited from three major pediatric hospitals. Empirical evaluations illustrated that pediatric epilepsy can cause, or is associated with, a network efficiency reduction. Patients showed a propensity to inefficiently employ the whole brain network to perform the ADDT language task; on the contrary, controls seemed to efficiently use smaller segregated network components to achieve the same task. To explain the causes of the decreased efficiency, graph theoretical analysis was carried out. The analysis revealed no substantial global network feature differences between the patient and control groups. It also showed that for both subject groups the language network exhibited small-world characteristics; however, the patient’s extent of activation network showed a tendency towards more random networks. It was also shown that the intensity of activation network displayed ipsilateral hub reorganization on the local level. The left hemispheric hubs displayed greater centrality values for patients, whereas the right hemispheric hubs displayed greater centrality values for controls. This hub hemispheric disparity was not correlated with a right atypical language laterality found in six patients. Finally it was shown that a multi-level unsupervised clustering scheme based on self-organizing maps, a type of artificial neural network, and k-means was able to fairly and blindly separate the subjects into their respective patient or control groups. The clustering was initiated using the local nodal centrality measurements only. Compared to the extent of activation network, the intensity of activation network clustering demonstrated better precision. This outcome supports the assertion that the local centrality differences presented by the intensity of activation network can be associated with focal epilepsy.

An investigation of the relationship between the components of tumour microenvironment, signal transduction pathways and outcome in breast cancer

Breast cancer, the most commonly diagnosed type of cancer in women, is a major cause of morbidity and mortality in the western world. Well-established risk factors of breast cancer are mostly related to women’s reproductive history, such as early menarche, late first pregnancy and late menopause. Survival rates have improved due to a combination of factors, including better health education, early detection with large-scale use of screening mammogram, improved surgical techniques, as well as widespread use of adjuvant therapy. At initial presentation, clinicopathological features of breast cancer such as age, nodal status, tumour size, tumour grade, and hormonal receptor status are considered to be the standard prognostic and predictive markers of patient survival, and are used to guide appropriate treatment strategies. Lymphovascular invasion (LBVI), including lymphatic (LVI) and blood (BVI) vessel invasion, has been reported to be prognostic and merit accurate evaluation, particularly in patients with node negative tumours who might benefit from adjuvant chemotherapy. There is a lack of standard assessment and agreement on distinguishing LVI from BVI despite the major challenges in the field. A systematic review of the literatures, examining methods of detection and the prognostic significance of LBVI, LVI and BVI, was carried out. The majority of studies used haematoxylin and eosin (H&E) and classical histochemistry to identify LVI and BVI. Only few recent studies used immunohistochemistry (IHC) staining of the endothelium lining lymphatic and blood vessels, and were able to show clear differences between LVI and BVI. The prognostic significance of LBVI and LVI was well-documented and strongly associated with aggressive features of breast tumours, while the prognostic value and the optimal detection method of BVI were unclear. Assessment and prognostic value of LBVI on H&E sections (LBVIH&E) was examined and compared to that of LVI and BVI detected using IHC with D2-40 for LVI (LVID2–40) and Factor VIII for BVI (BVIFVIII) in patients with breast cancer including node negative and triple negative patients (n=360). LBVIH&E, LVID2–40 and BVIFVIII were present in 102 (28%), 127 (35%) and 59 (16%) patients respectively. In node negative patients (206), LBVIH&E, LVID2–40 and BVIFVIII were present in 41 (20%), 53 (26%) and 21 (10%) respectively. In triple negative patients (102), LBVIH&E, LVID2–40 and BVIFVIII were present in 35 (29%), 36 (35%) and 14 (14%) respectively. LBVIH&E, LVID2–40 and BVIFVIII were all significantly associated with tumour recurrence in all cohorts. On multivariate survival analysis, only LVID2–40 and BVIFVIII were independent predictors of cancer specific survival (CSS) in the whole cohort (P=0.022 and P<0.001 respectively), node negative (P=0.008 and P=0.001 respectively) and triple negative patients (P=0.014 and P<0.001 respectively). Assessment of LVI and BVI by IHC, using D2-40 and Factor VIII, improves prediction of outcome in patients with node negative and triple negative breast cancer and was superior to the conventional detection method. Breast cancer is recognised as a complex molecular disease and histologically identical tumours may have highly variable outcomes, including different responses to therapy. Therefore, there is a compelling need for new prognostic and predictive markers helpful of selecting patients at risk and patients with aggressive diseases who might benefit from adjuvant and targeted therapy. It is increasingly recognised that the development and progression of human breast cancer is not only determined by genetically abnormal cells, but also dependent on complex interactions between malignant cells and the surrounding microenvironment. This has led to reconsider the features of tumour microenvironment as potential predictive and prognostic markers. Among these markers, tumour stroma percentage (TSP) and tumour budding, as well as local tumour inflammatory infiltrate have received recent attention. In particular, the local environment of cytokines, proteases, angiogenic and growth factors secreted by inflammatory cells and stromal fibroblasts has identified crucial roles in facilitating tumour growth, and metastasis of cancer cells through lymphatic and/or blood vessel invasion. This might help understand the underlying process promoting tumour invasion into these vessels. An increase in the proportion of tumour stroma and an increase in the dissociation of tumour cells have been associated with poorer survival in a number of solid tumours, including breast cancer. However, the interrelationship between these variables and other features of the tumour microenvironment in different subgroups of breast cancer are not clear. Also, whether their prognostic values are independent of other components of the tumour microenvironment have yet to be identified. Therefore, the relationship between TSP, clinicopathological characteristics and outcome in patients with invasive ductal breast cancer, in particular node negative and triple negative disease was examined in patients with invasive ductal breast cancer (n=361). The TSP was assessed on the haematoxylin and eosin-stained tissue sections. With a cut-off value of 50% TSP, patients with ≤50% stroma were classified as the low-TSP group and those with >50% stroma were classified as the high-TSP group. A total of 109 (30%) patients had high TSP. Patients with high TSP were old age (P=0.035), had involved lymph node (P=0.049), Her-2 positive tumours (P=0.029), low-grade peri-tumoural inflammatory infiltrate (P=0.034), low CD68+ macrophage infiltrate (P<0.001), low CD4+ (P=0.023) and low CD8+ T-lymphocytes infiltrate (P=0.017), tumour recurrence (P=0.015) and shorter CSS (P<0.001). In node negative patients (n=207), high TSP was associated with low CD68+ macrophage infiltrate (P=0.001), low CD4+ (P=0.040) and low CD8+ T-lymphocytes infiltrate (P=0.016) and shorter CSS (P=0.005). In triple negative patients (n=103), high TSP was associated with increased tumour size (P=0.017) high tumour grade (P=0.014), low CD8+ T-lymphocytes infiltrate (P=0.048) and shorter CSS (P=0.041). The 15-year cancer specific survival rate was 79% vs 21% in the low-TSP group vs high-TSP group. On multivariate survival analysis, a high TSP was associated with reduced CSS in the whole cohort (P=0.007), node negative patients (P=0.005) and those who received systemic adjuvant therapy (P=0.016), independent of other pathological characteristics including local host inflammatory responses. Therefore, a high TSP in invasive ductal breast cancer was associated with recurrence and poorer long-term survival. The inverse relation with the tumour inflammatory infiltrate highlights the importance of the amount of tumour stroma on immunological response in patients with invasive ductal breast cancer. Implementing this simple and reproducible parameter in routine pathological examination may help optimise risk stratification in patients with breast cancer. Similarly, the relationship between tumour budding, clinicopathological characteristics and outcome was examined in patients with invasive ductal breast cancer (n=474), using routine pathological sections. Tumour budding was associated with several adverse pathological characteristics, including positive lymph node (P=0.009), presence of LVI (P<0.001), and high TSP (P=0.001) and low-grade general peri-tumural inflammatory infiltrative (P=0.002). In node negative patients, a high tumour budding was associated with presence of LVI (P<0.001) and low-grade general peri-tumural inflammatory infiltrative (P=0.038). On multivariate survival analysis, tumour budding was associated with reduced CSS (P=0.001), independent of nodal status, tumour necrosis, CD8+ and CD138+ inflammatory cells infiltrate, LVI, BVI and TSP. Furthermore, tumour budding was independently associated with reduced CSS in node negative patients (P=0.004) and in those who have low TSP (P=0.003) and high-grade peri-tumoural inflammatory infiltrative (P=0.012). A high tumour budding was significantly associated with shorter CSS in luminal B and triple negative breast cancer subtypes (all P<0.001). Therefore, tumour budding was a significant predictor of poor survival in patients with invasive ductal breast cancer, independent of adverse pathological characteristics and components of tumour microenvironment. These results suggest that tumour budding may promote disease progression through a direct effect on local and distant invasion into lymph nodes and lymphatic vessels. Therefore, detection of tumour buds at the stroma invasive front might therefore represent a morphologic link between tumour progression, lymphatic invasion, spread of tumour cells to regional lymph nodes, and the establishment of metastatic dissemination. Given the potential importance of the tumour microenvironment, the characterisation of intracellular signalling pathways is important in the tumour microenvironment and is of considerable interest. One plausible signalling molecule that links tumour stroma, inflammatory cell infiltrate and tumour budding is the signal transducer and activator of transcription (STAT). The relationship between total and phosphorylated STAT1 (ph-STAT1), and total and ph-STAT3 tumour cell expression, components of tumour microenvironment and survival in patients with invasive ductal breast cancer was examined. IHC of total and ph-STAT1/STAT3 was performed on tissue microarray of 384 breast cancer specimens. Cellular STAT1 and cellular STAT3 expression at both cytoplasmic and nuclear locations were combined and identified as STAT1/STAT3 tumour cell expression. These results were then related to CSS and phenotypic features of the tumour and host. A high ph-STAT1 and a high ph-STAT3 tumour cell expression was associated with increased ER (P=0.001 and P<0.001 respectively) and PR (all P<0.05), reduced tumour grade (P=0.015 and P<0.001 respectively) and necrosis (all P=0.001). Ph-STAT1 was associated with increased general peri-tumoural inflammatory infiltrate (P=0.007) and ph-STAT3 was associated with lower CD4+ T-lymphocyte infiltrate (P=0.024). On multivariate survival analysis, including both ph-STAT1 and ph-STAT3 tumour cell expression, only high ph-STAT3 tumour cell expression was significantly associated with improved CSS (P=0.010) independent of other tumour and host-based factors. In patients with high necrosis grade, high ph-STAT3 tumour cell expression was independent predictor of improved CSS (P=0.021). Ph-STAT1 and ph-STAT3 were also significantly associated with improved cancer specific survival in luminal A and B subtypes. STAT1 and STAT3 tumour cell expression appeared to be an important determinant of favourable outcome in patients with invasive ductal breast cancer. The present results suggest that STATs may affect disease outcome through direct impact on tumour cells, and the surrounding microenvironment. The above observations of the present thesis point to the importance of the tumour microenvironment in promoting tumour budding, LVI and BVI. The observations from STATs work may suggest that an important driving mechanism for the above associations is the presence of tumour necrosis, probably secondary to hypoxia. Further work is needed to examine the interaction of other molecular pathways involved in the tumour microenvironment, such as HIF and NFkB in patients with invasive ductal breast cancer.

Tracking biochemical changes during adventitious root formation in olive (Olea europaea L.)

The activity of oxidative enzymes and the levels of free auxins were determined during adventitious root formation in olive explants. Rooting trials were performed both with in vitro-cultured micro shoots of the cultivar ‘Galega Vulgar’, treated with indole-3-butyric acid (IBA) and with salicylhydroxamic acid(SHAM) + IBA, as well as with semi-hardwood cuttings of the cultivars ‘Galega Vulgar’ (difficult-to-root)and ‘Cobrançosa’ (easy-to-root), treated with IBA. The auxin (IBA) was used in all experiments as a rooting promoter, while SHAM was used in micropropagation trials as rooting inhibitor, providing a negative control. Free indole-3-acetic acid (IAA) and IBA concentrations were determined in microshoots, as well as in semi-hardwood cuttings, throughout the rooting period at pre-established time-points. At the sametime-points, the enzymatic activity of polyphenol oxidases (PPO), peroxidases (POX), and IAA oxidase(IAAox) was evaluated in the microshoots. Microshoots treated with SHAM + IBA revealed higher POX and IAAox activity, as well as lower PPO activity, than those treated only with IBA. IAA levels were higher in IBA-treated microshoots during induction phase, but lower during early initiation phase. Incontrast, free IBA levels were higher in microshoots treated with SHAM + IBA during induction, but lower during initiation. A similar pattern of free auxin levels was observed in semi-hardwood cuttings of the two contrasting cultivars under evaluation. The similarities found on the auxin patterns of microshoots treated with SHAM and those of semi-hardwood cuttings of the difficult-to-root olive cultivar allow considering SHAM a reliable control for when simulation of a difficult-to-root behavior is necessary. The inhibitory effect of SHAM in root formation could be related with 1) the inhibition of alternative oxidase(AOX), leading to a down regulation of phenylpropanoid biosynthetic pathways, which would decrease the concentration of phenolic substrates for PPO; 2) an increase in IAAox activity resulting in lower free IAA levels or; 3) a defective conversion of IBA into IAA.

Simplificação do processo de multiplicação in vitro da oliveira "Olea europaea L."

A oliveira tem sido multiplicada ao longo dos tempos por métodos convencionais de propagação vegetativa como a enxertia e a estacaria lenhosa e semilenhosa. No entanto, estes métodos revelam-se lentos ou ineficientes para determinadas cultivares. No caso da cv. ‘Galega Vulgar’, ainda com grande expressão no olival português, e de difícil enraizamento por estacaria semilenhosa, tem sido usada a micropropagação de modo a contornar essas limitações e assim obter um elevado número de plantas em curto período de tempo. O custo final de produção por este processo ainda é elevado, podendo comprometer a sua aplicação a nível comercial. Grande parte dos custos estão relacionados com a fase de enraizamento in vitro que carece de ambiente estéril e condições de assépsia para a sua execução. Com vista a uma redução de custos associados a esta fase de produção, pretendeu-se com este trabalho testar a viabilidade do enraizamento ex vitro, na ausência de condições de assépsia. Este método poderá permitir uma significativa redução da mão-de-obra, ao mesmo tempo que facilitará a aclimatização das plantas e a obtenção de um sistema radicular de melhor qualidade. Compararam-se as taxas de enraizamento in vitro (controlo), com as obtidas ex vitro. Foram utilizados explantes provenientes de dois clones da cv. ‘Galega Vulgar’, (cl. 1441 e cl. 2022) cultivados e mantidos in vitro há vários anos no Laboratório de Melhoramento e Biotecnologia da Universidade de Évora. Para além do clone foi avaliada a influência do tipo de estaca (basal e apical), da hormona de enraizamento (AIB e ANA), da sua concentração (540 e 3000 ppm) e ainda de dois substratos, Preformas Jiffy® e pastilhas de fibra coco. Os melhores resultados foram obtidos com o clone 1441 em pastilhas de fibra de coco prensada, com o uso de estacas basais. Quanto à auxina, não se observaram diferenças significativas entre a utilização de ANA na concentração de 540 ppm e AIB na concentração de 3000 ppm. A aclimatização das plantas foi conseguida com taxas elevadas de sucesso, independentemente do tratamento utilizado. Conclui-se que a aplicação do método de enraizamento ex vitro simplifica procedimentos e mantém taxas de enraizamento elevadas, conduzindo assim a uma efetiva redução de tempo e custos associados; Simplifying procedures for in vitro propagation of olive “Olea europaea L.” Abstract: The olive tree has been multiplied throughout the ages by conventional methods of vegetative propagation such as grafting and wood or softwood cuttings. These propagation methods are somehow inefficient for certain cultivars. For the CV. ‘Galega Vulgar‘, still with great expression in Portuguese olive orchards, propagation has been attempted by in vitro culture in order to circumvent these limitations and so obtain a large number of plants in short time period. The final production fees associated to this process are still high which may compromise its application to a commercial level. Most of this process fees are related to the in vitro rooting phase which lacks sterile and aseptic conditions for its implementation. Aiming to reduce the costs associated with this production phase, this work tested the feasibility of the ex vitro rooting in the absence of aseptic conditions, which can allow a significant reduction of the manpower involved and an easier plant acclimatization due to its transplant with a balled-root system. In vitro rooting rates (control) were compared with those obtained with the ex vitro experiments. Explants from two clones of the cv. ‘Galega Vulgar‘ (cl. 1441 and cl. 2022), grown and maintained in vitro for several years in the Laboratory of Biotechnology and Plant Breeding of the University of Évora, were used in the trials. In addition to the clone, the effect of the cutting type (basal and apical), the rooting hormone (AIB and ANA), their concentration (540 and 3000 ppm) and two substrates, Preformas Jiffy ® and pressed coco fiber pellets, were also evaluated. The best results were obtained with the clone 1441, when rooted in pressed coco fiber pellets, using basal cuttings. Under this conditions no significant differences were observed between the use of ANA at 540 ppm or AIB in the 3000 ppm. Acclimatization of plants was achieved with high rates of success, regardless of the treatment used. It can be concluded that the application of the ex vitro rooting method allows to maintain high rooting rates, contributing for an effective reduction of time and fees of the rooting process.

Identification of endophytic bactéria from micropropagated yacon (Smallanthus sonchifolius) crowing under autotrophic and Heterotrophic systems.

Yacon, Smallanthus sonchifolius, an Andean species. is a rich source of dictetíc oligofructans with low glucose content. proteins and phenolic compounds. These constituents have shown efficacy in the prevention of diet-related ehronic diseases, including gastroin-testinal disorders and diabetes |1,2|. Yacon is part of a research program at the National Center for Natural Products Research (NCNPR) and University of Mississippi Field Station to develop new alternative root crops for Mississippi while attempting to im-prove the diet of low incorne families. Yacon can be easily propa-gated by cultings. Virus and nematode infections have been re-ported on plants propagated by cuttings in Brazil. a country that hás adopted Yacon as specialty crop [3|. We have developed two culture systems. autotrophic and heterotrophic, to produce healthy plants. Herem we describe the presence of endophytic bactéria m micropropagated Yacon. In auxin free media, new roots were induced. Overa 15day period. the average root mduction per expiam was 5.45 to 8.75 under autotrophic and heterotrophic cul-tures, respectively. Root lenglh vaned between 3 and 60mrn. The presence of root hairs and lateral roots was noticed only in auto-trophic condilions. These beneficiai bactéria were identified and chemically ctiaracterized. Acknowledgement: This research work was partially supported by the USDA/ARS Cooperative Research Agreement No. 58-6408-2-009. Referentes; |1) Terada S. et ai. (2006] Yakugaku Zasshi 126(8): 665-669. (2| Valentová K. Ulri-chová j. (2003) Biomedical Papers 147: 119-130. [3| Mogor C. et ai, (2003) Acta Horticulturea 597: 311 -313.

In vitro seed germination and multiplication of Calophyllum brasiliense.

Calophyllum brasiliense é uma espécie arbórea com sistema de propagação natural limitada. A germinação in vitro pode ser uma alternativa para obtenção de plântulas de qualidade. Sementes foram mantidas em água antes da desinfestação e comparadas com sementes controle (não imersas), sem diferença entre os tratamentos. HgCl2 usado durante a desinfestação reduziu a contaminação das culturas. A contaminação fúngica foi reduzida com fungicida adicionado ao meio (23 para 6,4%), mas a porcentagem de bactérias foi aumentada (24 para 36%). Em outro experimento, as sementes foram imersas em plant preservative mixture (PPM?) antes da desinfestação. Combinando a imersão por 48 h e 2 mL L-1 no meio de cultura, a contaminação foi de 6%. A imersão das sementes em GA3 antes da desinfestação reduziu a formação de raízes conforme a concentração foi aumentada. A germinação e o IVG foram reduzidos, respectivamente, de 72% e 0,129 (24 h) para 60% e 0,092 (48 h), de acordo com o tempo de exposição a GA3. Após 90 dias em meio de multiplicação contendo benzilaminopurina, o número médio de brotações por segmento nodal foi 3,4. A germinação in vitro de C. brasiliense é viável em meio WPM sem sacarose, com até 93,3% de sobrevivência.

Prognostic significance of pulmonary multifocal neuroendocrine proliferation with typical carcinoid

Background. Clinical significance of multifocal pulmonary neuroendocrine proliferations (MNEP), including tumorlets and pulmonary neuroendocrine cell hyperplasia, in association with Typical Carcinoid (TC), is still debated. Methods. A large retrospective series of TC with long-term follow-up data prospectively collected from two institutions was evaluated. Recurrence or new TC development was followed-up. Patients with TC alone and MNEP+TC were compared. Results. 234 TC patients undergone surgery were included: 41 MNEP+TC (17.5%) and 193 TC alone (82.5%). In the MNEP+TC group older age (p<0.001), peripheral tumors (p=0.0032), smaller tumor size (p=0.011) and lymph-nodal spread (p=0.02) were observed in comparison with TC group. Relapses occurred in 8 patients (19.5%) in the MNEP+TC group and in 7 (3.6%) of the TC group. The 10-years progression-free survival were 96.1% in TC and 83.8% in MNEP+TC (p<0.001). After matching, in 36 pairs of patients a significantly higher 5-years progression-free survival was calculated for TC group (p<0.01). Furthermore the odds of belonging to MNEP+TC group was higher with work-related exposure to inhalant agents (p=0.008), asthma/bronchitis (p=0.002), emphysema, fibrosis and inflammatory status (p=0.032), micronodules on the chest CT scan and respiratory insufficiency (p=0.036). Conclusions. The identification of MNEP requires careful pathological examination and postoperative follow-up. MNEP seems to be an adverse prognostic factor in patients with synchronous TC. Therefore, suspicion of MNEP during the pre-operative assessment should not be underestimated, enabling changes in the surgical strategy.

Long-period oscillations in GPS Up time series. Study over the European/Mediterranean area

The surface of the Earth is subjected to vertical deformations caused by geophysical and geological processes which can be monitored by Global Positioning System (GPS) observations. The purpose of this work is to investigate GPS height time series to identify interannual signals affecting the Earth’s surface over the European and Mediterranean area, during the period 2001-2019. Thirty-six homogeneously distributed GPS stations were selected from the online dataset made available by the Nevada Geodetic Laboratory (NGL) on the basis of the length and quality of the data series. The Principal Component Analysis (PCA) is the technique applied to extract the main patterns of the space and time variability of the GPS Up coordinate. The time series were studied by means of a frequency analysis using a periodogram and the real-valued Morlet wavelet. The periodogram is used to identify the dominant frequencies and the spectral density of the investigated signals; the second one is applied to identify the signals in the time domain and the relevant periodicities. This study has identified, over European and Mediterranean area, the presence of interannual non-linear signals with a period of 2-to-4 years, possibly related to atmospheric and hydrological loading displacements and to climate phenomena, such as El Niño Southern Oscillation (ENSO). A clear signal with a period of about six years is present in the vertical component of the GPS time series, likely explainable by the gravitational coupling between the Earth’s mantle and the inner core. Moreover, signals with a period in the order of 8-9 years, might be explained by mantle-inner core gravity coupling and the cycle of the lunar perigee, and a signal of 18.6 years, likely associated to lunar nodal cycle, were identified through the wavelet spectrum. However, these last two signals need further confirmation because the present length of the GPS time series is still too short when compared to the periods involved.

Excitonic properties of transition metal oxide perovskites and workflow automatization of GW schemes

The Many-Body-Perturbation Theory approach is among the most successful theoretical frameworks for the study of excited state properties. It allows to describe the excitonic interactions, which play a fundamental role in the optical response of insulators and semiconductors. The first part of the thesis focuses on the study of the quasiparticle, optical and excitonic properties of \textit{bulk} Transition Metal Oxide (TMO) perovskites using a G$_0$W$_0$+Bethe Salpeter Equation (BSE) approach. A representative set of 14 compounds has been selected, including 3d, 4d and 5d perovskites. An approximation of the BSE scheme, based on an analytic diagonal expression for the inverse dielectric function, is used to compute the exciton binding energies and is carefully bench-marked against the standard BSE results. In 2019 an important breakthrough has been achieved with the synthesis of ultrathin SrTiO3 films down to the monolayer limit. This allows us to explore how the quasiparticle and optical properties of SrTiO3 evolve from the bulk to the two-dimensional limit. The electronic structure is computed with G0W0 approach: we prove that the inclusion of the off-diagonal self-energy terms is required to avoid non-physical band dispersions. The excitonic properties are investigated beyond the optical limit at finite momenta. Lastly a study of the under pressure optical response of the topological nodal line semimetal ZrSiS is presented, in conjunction with the experimental results from the group of Prof. Dr. Kuntscher of the Augsburg University. The second part of the thesis discusses the implementation of a workflow to automate G$_0$W$_0$ and BSE calculations with the VASP software. The workflow adopts a convergence scheme based on an explicit basis-extrapolation approach [J. Klimeš \textit{et al.}, Phys. Rev.B 90, 075125 (2014)] which allows to reduce the number of intermediate calculations required to reach convergence and to explicit estimate the error associated to the basis-set truncation.