Breathhold three-dimensional coronary magnetic resonance angiography using real-time navigator technology.

The acquisition duration of most three-dimensional (3D) coronary magnetic resonance angiography (MRA) techniques is considerably prolonged, thereby precluding breathholding as a mechanism to suppress respiratory motion artifacts. Splitting the acquired 3D volume into multiple subvolumes or slabs serves to shorten individual breathhold duration. Still, problems associated with misregistration due to inconsistent depths of expiration and diaphragmatic drift during sustained respiration remain to be resolved. We propose the combination of an ultrafast 3D coronary MRA imaging sequence with prospective real-time navigator technology, which allows correction of the measured volume position. 3D volume splitting using prospective real-time navigator technology, was successfully applied for 3D coronary MRA in five healthy individuals. An ultrafast 3D interleaved hybrid gradient-echoplanar imaging sequence, including T2Prep for contrast enhancement, was used with the navigator localized at the basal anterior wall of the left ventricle. A 9-cm-thick volume, with in-plane spatial resolution of 1.1 x 2.2 mm, was acquired during five breathholds of 15-sec duration each. Consistently, no evidence of misregistration was observed in the images. Extensive contiguous segments of the left anterior descending coronary artery (48 +/- 18 mm) and the right coronary artery (75 +/- 5 mm) could be visualized. This technique has the potential for screening for anomalous coronary arteries, making it well suited as part of a larger clinical MR examination. In addition, this technique may also be applied as a scout scan, which allows an accurate definition of imaging planes for subsequent high-resolution coronary MRA.

Traducción comentada de “Genetically Modified Organisms (GMOs): Transgenic Crops and Recombinant DNA Technology”

The purpose of this paper is to provide a translation into Spanish of a review articleabout genetically modified organisms (GMOs) entitled “Genetically ModifiedOrganisms (GMOs): Transgenic Crops and Recombinant DNA Technology” publishedby the well-known scientific journal Nature. In a world where English has become thelingua franca when it comes to transferring scientific knowledge and information, itmust be taken into account that not everyone—from scientist to the general public—hasa good enough command of English so that they can feel comfortable enough reading inthis language. Translators are consequently needed resulting from a great demand oftranslation activity into, for example, Spanish. This is the reason why the proposedSpanish translation is followed by a detailed analysis emphasizing the difficulties andproblems that characterize scientific—and also general—translation (i.e. terminology,syntax, semantics, pragmatics, and ideology), for which different approaches as how tosolve them are provided. On the basis of the analysis, it can be concluded thatexperience will be of much help to scientific translators, given that specificterminological knowledge and style requirements must always be born in mind whentranslating in this field. Moreover, this paper is intended to serve as a guide forTranslation students specializing in the field of science and the expectation is to helpthem make the right decisions when it comes to translating. However, it is clear that itcan only be thought of as an introduction that should be completed with further researchand documentation tasks in order to offer a complete reference tool: the ultimatehandbook of scientific translation.

Induktiosilmukka kuulolaitteen käyttäjän apuvälineenä

Tämä insinöörityö tehtiin Kuulonhuoltoliitto ry:n Esteetön kuuntelu -projektille. Työ käsittelee kuulolaitteen käyttäjän apuvälineenä käytettäviä induktiosilmukkajärjestelmiä. Induktiivisen äänensiirtojärjestelmän avulla huonokuuloinen saa kuunteluympäristöstään paremman signaali-kohinasuhteen ilman tilan kaikua ja taustahälyä. Tämä helpottaa kuuntelua esimerkiksi puhetilaisuuksissa. Työn tarkoituksena oli päivittää aiempia tutkimuksia kokoamalla uusin tietous induktiosilmukoiden tekniikasta. Kirjallisuustutkimuksen lisäksi kartoitettiin nykyinen silmukkavahvistinkanta haastattelemalla maahantuojia ja jälleenmyyjiä. Silmukkavahvistimien hintakartoituksen tarkoituksena oli rakentaa perusteet sopivan tehoisen ja hintaisen vahvistimen hankintaa varten suunniteltaessa induktiivisella äänensiirtojärjestelmällä varustettavia tiloja. Työ tarkastelee induktiivisen äänensiirtojärjestelmän ensisijaisen kohderyhmän, kuulokojeita käyttävien huonokuuloisten keskeisiä tarpeita ja heidän käyttämäänsä apuvälinetekniikkaa. Työ käy läpi audiotekniikan perusteita, sähkömagneettisen induktioilmiön, induktiivisen äänensiirtojärjestelmän rakenteen, sen ylikuulumisongelmat ja häiriötekijät sekä IEC:n 60118-4 edition 2.0 standardin CDV-luonnoksen mukaiset periaatteelliset asennusja mittausohjeet. IEC:n tuleva standardi tekee työstä ajankohtaisen. Työn tuloksena saatua tietoa voidaan käyttää Kuulonhuoltoliitto ry:n opas- ja tiedotusmateriaalin uudistamisessa, pohjana hyvän kuunteluympäristön malliratkaisujen ja esteettömyyskriteerien soveltamisessa. Työstä on hyötyä erityisesti Kuulonhuoltoliitto ry:n vapaaehtoiskartoittajille kuten myös kenelle tahansa aiheesta syvemmin kiinnostuneelle.

Implementing NX Remote Desktop technology in the LTSP system

This project focuses on studying and testing the benefits of the NX Remote Desktop technology in administrative use for Finnish Meteorological Institutes existing Linux Terminal Service Project environment. This was done due to the criticality of the system caused by growing number of users as the Linux Terminal Service Project system expands. Although many of the supporting tasks can be done via Secure Shell connection, testing graphical programs or desktop behaviour in such a way is impossible. At first basic technologies behind the NX Remote Desktop were studied, and after that started the testing of two possible programs, FreeNX and NoMachine NX server. Testing the functionality and bandwidth demands were first done in a closed local area network, and results were studied. The better candidate was then installed in a virtual server simulating actual Linux Terminal Service Project server at Finnish Meteorological Institute and connection from Internet was tested to see was there any problems with firewalls and security policies. The results are reported in this study. Studying and testing the two different candidates of NX Remote Desktop showed, that NoMachine NX Server provides better customer support and documentation. Security aspects of the Finnish Meteorological Institute had also to be considered, and since updates along with the new developing tools are announced in next version of the program, this version was the choice. Studies also show that even NoMachine promises a swift connection over an average of 20Kbit/s bandwidth, at least double of that is needed. This project gives an overview of available remote desktop products along their benefits. NX Remote Desktop technology is studied, and installation instructions are included. Testing is done in both, closed and the actual environment and problems and suggestions are studied and analyzed. The installation to the actual LTSP server is not yet made, but a virtual server is put up in the same place in the view of network topology. This ensures, that if the administrators are satisfied with the system, installation and setting up the system will go as described in this report.

Usefulness of methadone plasma concentration measurement in patients receiving nevirapine or efavirenz.

Objective: To determine methadone plasma trough and peak concentrations in patients presenting opiate withdrawal symptoms after introduction of nevirapine or efavirenz. To describe the disappearance of these symptoms after methadone titration based on plasma concentrations rather than on the symptoms. Methods: Nine patients undergoing highly active antiretroviral therapy (HAART) and either nevirapine or efavirenz treatment were monitored daily for opiate withdrawal in a specialized drug addiction center. Methadone dose was titrated daily, and plasma concentrations were measured. The data are retrospective (case series). Results: Several patients complained of symptoms such as nausea, vomiting, accelerated intestinal transit, or insomnia. Even after methadone titration based on clinical symptoms, patients and health-care providers trained in infectious disease did not classify these as withdrawal symptoms and considered them as the side effects of HAART or anxiety. Methadone plasma trough concentration showed low levels of (R)- and (R,S)-methadone. Further methadone dose adjustment according to plasma level resulted in the disappearance of these withdrawal symptoms. The daily methadone dose was split when the peak/trough (R)-methadone ratio was more than 2. Conclusions: When introducing efavirenz or nevirapine to patients undergoing methadone treatment, withdrawal symptoms should be monitored, especially those such as insomnia, vomiting, or nausea. Methadone plasma trough and peak measurements can be of value in preventing unnecessary side effects of HAART.

Relay card for capacitance measurements

In this bachelor's thesis a relay card for capacitance measurements was designed, built and tested. The study was made for the research and development laboratory of VTI Technologies, which manufactures capacitive silicon micro electro mechanical accelerometers and pressure sensors. As the size of the sensors is decreasing the capacitance value of the sensors also decreases. The decreased capacitance causes a need for new and more accurate measurement systems. The technology used in the instrument measuring the capacitance dictates a framework how the relay card should be designed, thus the operating principle of the instrument must be known. To achieve accurate results the measurement instrument and its functions needed to be used correctly. The relay card was designed using printed circuit board design methods that minimize interference coupling to the measurement. The relay card that was designed in this study is modular. It consists of a separate CPU card, which was used to control the add-on cards connected to it. The CPU card was controlled from a computer through a serial bus. Two add-on cards for the CPU card were designed in this study. The first one was the measurement card, which could be used to measure 32 capacitive sensors. The second add-on card was the MUX card, which could be used to switch between two measurement cards. The capacitance measurements carried out through the MUX card and the measurement cards were characterized with a series of test measurements. The test measurement data was then analysed. The relay card design was confirmed to work and offer accurate measurement results up to a measurement frequency of 10 MHz. The length of the measurement cables limited the measurement frequency.

The Impact of Trade on Technology and Skill Upgrading Evidence from Argentina

In the last 20 years, wage inequality has increased in many developing countries. Most research on this topic focuses on two alternative causes: trade or skill-biased technical change. Several empirical studies in both developed and developing countries document increases in skill intensity within all sectors, favoring the technological change explanation over trade. Instead, I present and test a model where bilateral trade liberalization increases exporting revenues inducing more firms to enter the export market and to adopt skilled-biased new technologies. I find that the increase in the relative demand of skilled labor does not come from labor reallocation across sectors or firms but from skill upgrading within firms. Firms that upgrade technology faster also upgrade skill faster. Finally, firms entering the export market after liberalization become more skill and technology-intensive than non exporters.

Measurement with Some Theory: a New Approach to Evaluate Business Cycle Models

We propose a method to evaluate cyclical models which does not require knowledge of the DGP and the exact empirical specification of the aggregate decision rules. We derive robust restrictions in a class of models; use some to identify structural shocks and others to evaluate the model or contrast sub-models. The approach has good size and excellent power properties, even in small samples. We show how to examine the validity of a class of models, sort out the relevance of certain frictions, evaluate the importance of an added feature, and indirectly estimate structural parameters.

Special Investigation of Iowa State University of Science and Technology, Department of Facilities Planning & Management, For the Period February 3, 2003 through December 7, 2005

Other Audit Reports - Special Investigation

Productivity Growth during the English Industrial Revolution: A Dual Approach

This paper presents new estimates of total factor productivity growth in Britain for the period 1770-1860. We use a dual technique recently popularized by Hsieh (1999), and argue that the estimates we derive from factor prices are of similar quality to quantity-based calculations. Our results provide further evidence, derived from this independent set of sources, that productivity growth during the British Industrial Revolution was relatively slow. During the years 1770-1800, TFP growth was close to zero, according to our estimates. The period 1800-1830 experienced an acceleration of productivity growth. The Crafts-Harley view of the Industrial Revolution is thus reinforced. We also consider alternative explanations of slow productivity growth, and reject the interpretation that focuses on the introduction of steam as a general purpose technology.

The Labor Market Effects of Technology Shocks

We analyze the labor market effects of neutral and investment-specific technology shocks along the intensive margin (hours worked) and the extensive margin (unemployment). We characterize the dynamic response of unemployment in terms of the job separation and the job finding rate. Labor market adjustments occur along the extensive margin in response to neutral shocks, along the intensive margin in response to investment specific shocks. The job separation rate accounts for a major portion of the impact response of unemployment. Neutral shocks prompt a contemporaneous increase in unemployment because of a sharp rise in the separation rate. This is prolonged by a persistent fall in the job finding rate. Investment specific shocks rise employment and hours worked. Neutral shocks explain a substantial portion of the volatility of unemployment and output; investment specific shocks mainly explain hours worked volatility. This suggests that neutral progress is consistent with Schumpeterian creative destruction, while investment-specific progress operates as in a neoclassical growth model.

Report of Recommendations to the Iowa State University of Science and Technology, June 30, 2005

State University Audit Report

Iowa State Center Business Office, Iowa State University of Science and Technology, Independent Auditor's Reports, Financial Statements, June 30, 2005 & 2006

State University Audit Report

Academic Building Revenue Bond Funds, Iowa State University of Science and Technology, Independent Auditor's Report, Basic Financial Statements and Supplementary Information, June 30, 2006

State University Audit Report

Dormitory and Dining Services Revenue Bond Funds, Iowa State University of Science and Technology, Independent Auditor's Report, Basic Financial Statements and Supplementary Information, June 30, 2006

State University Audit Report