Operational water balance in irrigation districts

In pressure irrigation-water distribution networks, applied water volume is usually controlled opening a valve during a calculated time interval, and assuming constant flow rate. In general, pressure regulating devices for controlling the discharged flow rate by irrigation units are needed due to the variability of pressure conditions.

Desarrollo de un Procedimiento Basado en Algoritmos de Optimización para el Dimensionado de Absorbedores Puntuales Aplicados a la Conversión de Energía Undimotriz

La energía transportada por el oleaje a través de los océanos (energía undimotriz) se enmarca dentro de las denominadas energías oceánicas. Su aprovechamiento para generar energía eléctrica (o ser aprovechada de alguna otra forma) es una idea reflejada ya hace más de dos siglos en una patente (1799). Desde entonces, y con especial intensidad desde los años 70, ha venido despertando el interés de instituciones ligadas al I+D+i y empresas del sector energético y tecnológico, debido principalmente a la magnitud del recurso disponible. Actualmente se puede considerar al sector en un estado precomercial, con un amplio rango de dispositivos y tecnologías en diferente grado de desarrollo en los que ninguno destaca sobre los otros (ni ha demostrado su viabilidad económica), y sin que se aprecie una tendencia a converger un único dispositivo (o un número reducido de ellos). El recurso energético que se está tratando de aprovechar, pese a compartir la característica de no-controlabilidad con otras fuentes de energía renovable como la eólica o la solar, presenta una variabilidad adicional. De esta manera, diferentes localizaciones, pese a poder presentar recursos de contenido energético similar, presentan oleajes de características muy diferentes en términos de alturas y periodos de oleaje, y en la dispersión estadística de estos valores. Esta variabilidad en el oleaje hace que cobre especial relevancia la adecuación de los dispositivos de aprovechamiento de energía undimotriz (WEC: Wave Energy Converter) a su localización, de cara a mejorar su viabilidad económica. Parece razonable suponer que, en un futuro, el proceso de diseño de un parque de generación undimotriz implique un rediseño (en base a una tecnología conocida) para cada proyecto de implantación en una nueva localización. El objetivo de esta tesis es plantear un procedimiento de dimensionado de una tecnología de aprovechamiento de la energía undimotriz concreta: los absorbedores puntuales. Dicha metodología de diseño se plantea como un problema de optimización matemático, el cual se resuelve utilizando un algoritmo de optimización bioinspirado: evolución diferencial. Este planteamiento permite automatizar la fase previa de dimensionado implementando la metodología en un código de programación. El proceso de diseño de un WEC es un problema de ingería complejo, por lo que no considera factible el planteamiento de un diseño completo mediante un único procedimiento de optimización matemático. En vez de eso, se platea el proceso de diseño en diferentes etapas, de manera que la metodología desarrollada en esta tesis se utilice para obtener las dimensiones básicas de una solución de referencia de WEC, la cual será utilizada como punto de partida para continuar con las etapas posteriores del proceso de diseño. La metodología de dimensionado previo presentada en esta tesis parte de unas condiciones de contorno de diseño definidas previamente, tales como: localización, características del sistema de generación de energía eléctrica (PTO: Power Take-Off), estrategia de extracción de energía eléctrica y concepto concreto de WEC). Utilizando un algoritmo de evolución diferencial multi-objetivo se obtiene un conjunto de soluciones factibles (de acuerdo con una ciertas restricciones técnicas y dimensionales) y óptimas (de acuerdo con una serie de funciones objetivo de pseudo-coste y pseudo-beneficio). Dicho conjunto de soluciones o dimensiones de WEC es utilizado como caso de referencia en las posteriores etapas de diseño. En el documento de la tesis se presentan dos versiones de dicha metodología con dos modelos diferentes de evaluación de las soluciones candidatas. Por un lado, se presenta un modelo en el dominio de la frecuencia que presenta importantes simplificaciones en cuanto al tratamiento del recurso del oleaje. Este procedimiento presenta una menor carga computacional pero una mayor incertidumbre en los resultados, la cual puede traducirse en trabajo adicional en las etapas posteriores del proceso de diseño. Sin embargo, el uso de esta metodología resulta conveniente para realizar análisis paramétricos previos de las condiciones de contorno, tales como la localización seleccionada. Por otro lado, la segunda metodología propuesta utiliza modelos en el domino estocástico, lo que aumenta la carga computacional, pero permite obtener resultados con menos incertidumbre e información estadística muy útil para el proceso de diseño. Por este motivo, esta metodología es más adecuada para su uso en un proceso de dimensionado completo de un WEC. La metodología desarrollada durante la tesis ha sido utilizada en un proyecto industrial de evaluación energética preliminar de una planta de energía undimotriz. En dicho proceso de evaluación, el método de dimensionado previo fue utilizado en una primera etapa, de cara a obtener un conjunto de soluciones factibles de acuerdo con una serie de restricciones técnicas básicas. La selección y refinamiento de la geometría de la solución geométrica de WEC propuesta fue realizada a posteriori (por otros participantes del proyecto) utilizando un modelo detallado en el dominio del tiempo y un modelo de evaluación económica del dispositivo. El uso de esta metodología puede ayudar a reducir las iteraciones manuales y a mejorar los resultados obtenidos en estas últimas etapas del proyecto. ABSTRACT The energy transported by ocean waves (wave energy) is framed within the so-called oceanic energies. Its use to generate electric energy (or desalinate ocean water, etc.) is an idea expressed first time in a patent two centuries ago (1799). Ever since, but specially since the 1970’s, this energy has become interesting for R&D institutions and companies related with the technological and energetic sectors mainly because of the magnitude of available energy. Nowadays the development of this technology can be considered to be in a pre-commercial stage, with a wide range of devices and technologies developed to different degrees but with none standing out nor economically viable. Nor do these technologies seem ready to converge to a single device (or a reduce number of devices). The energy resource to be exploited shares its non-controllability with other renewable energy sources such as wind and solar. However, wave energy presents an additional short-term variability due to its oscillatory nature. Thus, different locations may show waves with similar energy content but different characteristics such as wave height or wave period. This variability in ocean waves makes it very important that the devices for harnessing wave energy (WEC: Wave Energy Converter) fit closely to the characteristics of their location in order to improve their economic viability. It seems reasonable to assume that, in the future, the process of designing a wave power plant will involve a re-design (based on a well-known technology) for each implementation project in any new location. The objective of this PhD thesis is to propose a dimensioning method for a specific wave-energy-harnessing technology: point absorbers. This design methodology is presented as a mathematical optimization problem solved by using an optimization bio-inspired algorithm: differential evolution. This approach allows automating the preliminary dimensioning stage by implementing the methodology in programmed code. The design process of a WEC is a complex engineering problem, so the complete design is not feasible using a single mathematical optimization procedure. Instead, the design process is proposed in different stages, so the methodology developed in this thesis is used for the basic dimensions of a reference solution of the WEC, which would be used as a starting point for the later stages of the design process. The preliminary dimensioning methodology presented in this thesis starts from some previously defined boundary conditions such as: location, power take-off (PTO) characteristic, strategy of energy extraction and specific WEC technology. Using a differential multi-objective evolutionary algorithm produces a set of feasible solutions (according to certain technical and dimensional constraints) and optimal solutions (according to a set of pseudo-cost and pseudo-benefit objective functions). This set of solutions or WEC dimensions are used as a reference case in subsequent stages of design. In the document of this thesis, two versions of this methodology with two different models of evaluation of candidate solutions are presented. On the one hand, a model in the frequency domain that has significant simplifications in the treatment of the wave resource is presented. This method implies a lower computational load but increased uncertainty in the results, which may lead to additional work in the later stages of the design process. However, use of this methodology is useful in order to perform previous parametric analysis of boundary conditions such as the selected location. On the other hand, the second method uses stochastic models, increasing the computational load, but providing results with smaller uncertainty and very useful statistical information for the design process. Therefore, this method is more suitable to be used in a detail design process for full dimensioning of the WEC. The methodology developed throughout the thesis has been used in an industrial project for preliminary energetic assessment of a wave energy power plant. In this assessment process, the method of previous dimensioning was used in the first stage, in order to obtain a set of feasible solutions according to a set of basic technical constraints. The geometry of the WEC was refined and selected subsequently (by other project participants) using a detailed model in the time domain and a model of economic evaluation of the device. Using this methodology can help to reduce the number of design iterations and to improve the results obtained in the last stages of the project.

Integración de sistemas fotovoltaicos en edificios de oficinas en bajas latitudes: estudio del balance energético aplicado a Brasil

La hipótesis que inspiró esta tesis sostiene que la integración de componentes fotovoltaicos en los cerramientos opacos y sombreamientos de huecos acristalados de edificios de oficinas en sitios ubicados en bajas latitudes, tomando como el ejemplo el caso concreto de Brasil, podría incrementar su eficiencia energética. Esta posibilidad se basa en el bloqueo de una parte significativa de la irradiación solar incidente en estos edificios, reduciendo así las cargas térmicas para la climatización y a la vez transformándola en energía eléctrica, a tal punto que se amortizan los costes de inversión en plazos aceptables a través de los ahorros en la demanda de energía. Para verificar esta hipótesis de partida se ha propuesto como objetivo general analizar la integración de elementos fotovoltaicos en cubiertas, muros opacos y sombreamiento de huecos acristalados desde la óptica del balance energético térmico y eléctrico. Inicialmente se presenta y analiza el estado del arte en los temas estudiados y la metodología de investigación, de carácter teórico basada en cálculos y simulaciones. A partir de un modelo tipo de edificio de oficinas situado en Brasil, se definen cuatro casos de estudio y una serie de parámetros, los cuales se analizan para siete latitudes ubicadas entre -1,4° y -30°, separadas las unas de las otras por aproximadamente 5°. Se presentan y discuten los resultados de más de 500 simulaciones para los siguientes conceptos: - recurso solar, desde la perspectiva de la disponibilidad de irradiación solar en distintas superficies de captación apropiadas para la integración de sistemas solares fotovoltaicos en edificaciones en bajas latitudes; - análisis de sombras, con objetivo de identificar los ángulos de sombras vertical (AVS) para protección de huecos acristalados en edificios de oficinas; - balance energético térmico, para identificar el efecto térmico del apantallamiento provocado por componentes fotovoltaicos en cubiertas, muros opacos y parasoles en ventanas en las cargas de refrigeración y consecuentemente en las demandas de energía eléctrica; - balance energético eléctrico, contrastando los resultados del balance térmico con la energía potencialmente generada en las envolventes arquitectónicas bajo estudio; - análisis económico, basado en un escenario de precios de la tecnología fotovoltaica de un mercado maduro y en la política de inyección a la red marcada por la actual normativa brasileña. Se han verificado los potenciales de ahorro económico que los sistemas activos fotovoltaicos podrían aportar, y asimismo se calculan diversos indicadores de rentabilidad financiera. En suma, esta investigación ha permitido extraer conclusiones que contribuyen al avance de la investigación y entender las condiciones que propician la viabilidad de la aplicación de componentes fotovoltaicas en las envolventes de edificios en Brasil, y hasta un cierto punto en otros países en latitudes equivalentes. ABSTRACT The hypothesis that inspired this thesis sustains that integration of photovoltaic components in the opaque envelope and shading elements of office buildings placed at low-latitude countries, using the specific case of Brazil, could increase its energy efficiency. This is possible because those components block a significant part of the incident solar irradiation, reducing its heating effect on the building and transforming its energy into electricity in such a way that the extra investments needed can be paid back in acceptable periods given the electricity bill savings they produce. In order to check this hypothesis, the main goal was to analyze the thermal and electrical performance of photovoltaic components integrated into roofs, opaque façades and window shadings. The first step is an introduction and discussion of the state of the art in the studied subjects, as well as the chosen methodology (which is theoretical), based on calculations and simulations. Starting from an office building located in Brazil, four case studies and their parameters are defined, and then analyzed, for seven cities located between latitudes -1.4° and -30°, with an approximate distance of 5° separating each one. Results of more than 500 simulations are presented and discussed for the following concepts: - Solar resource, from the perspective of irradiation availability on different surfaces for the integration of photovoltaic systems in buildings located at low latitudes; - Shading analysis, in order to determine the vertical shading angles (VSA) for protection of the glazed surfaces on office buildings; - Thermal energy balance, to identify the screening effect caused by photovoltaic components on roofs, opaque façades and window shadings on the cooling loads, and hence electricity demands; - Electric energy balance, comparing thermal energy balance with the energy potentially generated using the active skin of the buildings; - Economic analysis, based on a mature-market scenario and the current net metering rules established by the Brazilian government, to identify the potential savings these photovoltaic systems could deliver, as well as several indicators related to the return on the investment. In short, this research has led to conclusions that contribute to the further development of knowledge in this area and understanding of the conditions that favor the application of photovoltaic components in the envelope of office buildings in Brazil and, to a certain extent, in other countries at similar latitudes.

Despliegue FTTH: evolución de las redes de banda ancha fijas hacia la fibra óptica

En este Proyecto se va a abordar el estudio, tanto de arquitectura como de tecnologías, de la evolución de las redes de banda ancha fijas, desde la invención del teléfono hasta la progresiva implantación de la fibra óptica, debido a que las redes de cobre serán reemplazadas por este nuevo material. Se va a estudiar esta evolución en base al medio físico en el que se apoyan las diferentes redes desde el pasado hasta nuestros días. Esta implantación de fibra óptica es conocida como FTTH, fibra hasta el hogar, donde se despliegan estas redes con sus diferentes elementos para proporcionar servicio de banda ancha a la sociedad. En esta memoria se recoge el despliegue para diferentes escenarios tipo más comunes y llevados a cabo por las diferentes compañías de telecomunicaciones del país. Para ello se ha escogido la cartografía del distrito madrileño de Moratalaz y se ha procedido a diseñar tanto la red de alimentación como la red de distribución que conforman el despliegue FTTH. Por último se ha comentado las futuras líneas de evolución de estas redes, tanto a corto plazo como a largo, analizando los beneficios económicos para las diferentes compañías encargadas de los despliegues y los mejorados servicios que ofrecen al conjunto de la sociedad. ABSTRACT. This Project will address the study of the evolution of fixed broadband networks, mainly in architectures and technologies. The study will start from the invention of telephone to the progressive implantation of optical fiber since this medium are intended to replace the copper wires employed in this networks. It will study this evolution based on the physical medium in which the different networks are supported from the past to our times. This implantation of fiber-optic technology is known as FTTH, fiber to the home, so these networks are deployed with different elements in order to provide the broadband service to society. In this report, deployment for different common cases implanted by different telecommunications companies in the country is collected. For this it has chosen the cartography of Moratalaz and has proceeded to design the supply and distribution networks that compose the FTTH deployment. Finally, it has been discussed the future lines of the evolution for these networks in the short-term and long-term analyzing the economic benefits for the companies and the improved services provided to the whole society.

Red SFN de distribución local de TDT

Este proyecto consiste en el diseño completo, de una red de distribución de TDT, a nivel local, mediante difusión SFN, Single Frequency Network. Este tipo de difusión, tiene la capacidad de difundir los servicios de televisión en una única frecuencia, cubriendo un área, ya sea local o estatal, aprovechando en las zonas de interferencia los rebotes de la señal y así evitar el uso de una frecuencia distinta por cada centro de emisión, todos los que componen un área de cobertura. Para el diseño de la red, se ha optado por diseñar una red IP, mediante distribución multicast, ya que esta es la tecnología imperante a día de hoy, quedando obsoleta ya, la distribución analógica, ya que consume muchos más recursos y por consiguiente mucho más costosa de implementar. El documento se divide en cuatro capítulos. En el primer capítulo se realizará una introducción teórica a las redes de distribución SFN, centrándose en el cálculo de los retardos, punto fundamental en el diseño de este tipo de redes. Se continuará unas nociones básicas de redes IP y el protocolo multicast, en el que se basa el trasporte de la señal. El capítulo dos, se centra en el diseño de la red, desde los centros de producción, donde se generan los programas a emitir, hasta los diferentes centros de difusión que cubrirán todo el área de cobertura requerida, pasando por el centro de multiplexación, donde se sitúa la cabecera que compondrá el múltiplex a difundir. Se describirán los equipos y el diseño de los distintos centros que conforman la red, centros de producción, multiplexación y difusión. A demás se realizará el cálculo de retardo de la señal, necesario en este tipo de redes. Se continuará con el capítulo tres, donde se describirá la configuración de la red, tanto a nivel de equipamiento, como el diseño y asignación IP de toda la red, separando la red de servicio de la red de gestión para una mayor confiabilidad y eficiencia de la red. Se finalizará con la descripción de la gestión de la red, que mediante diferentes herramientas, proporcionan un monitoreado en tiempo real de todo el sistema, dando la posibilidad de adelantarsey previniendo posibles incidencias que, puedan causar alguna deficiencia en el servicio que se entrega al usuario final. ABSTRACT. This project involves the complete design of a network´s TDT distribution, locally, by broadcast SFN (Single Frequency Network). This type of broadcast, has the ability to broadcast television´s services on a single frequency, covering an area, whether local or state, drawing on the interference zones, signal´s rebounds, to avoid the use of a different frequency each broadcast center, all those who make a coverage area. For the design of the network, has been chosen to design an IP network using multicast distribution, since this is the prevailing technology today, as the analogue distribution, consumes more resources and therefore, much more costly to implement. The document is divided into four chapters. In the first chapter you can find a theoretical introduction to SFN distribution networks, focusing on the calculation of delays, fundamental point, in the design of these networks. A basic understanding of IP networks and the multicast protocol, in which the transport of the signal is based, will continue. Chapter two focuses on the design of the network, from production centers, where the programs are created to broadcast, to different distribution centers covering the entire area of coverage required, through the multiplexing center, where the head is located, which comprise the multiplex. Also, the equipment and design of the various centers in the network, production centers, multiplexing center and distribution centers, are described. Furthermore, the calculation of signal delay, necessary in such networks, is performed. We will continue with the chapter three, where the network configuration will be described, both in termsofequipment, such as design IP mapping of the entire network, separating the service network and management network, for increased the reliability and efficiency of the network. It will be completed with the description of the management of the network, using different tools provide real-time monitoring of the entire system, making it possible, to anticipate and prevent any incidents that might cause a deficiency in the service being delivered to final user.

Multiwavelength study of quiescent states of MrK 421 with unprecedented hard x-Ray coverage provided by NuStar in 2013

We present coordinated multiwavelength observations of the bright, nearby BL Lacertae object Mrk 421 taken in 2013 January–March, involving GASP-WEBT, Swift, NuSTAR, Fermi-LAT, MAGIC, VERITAS, and other collaborations and instruments, providing data from radio to very high energy (VHE) γ-ray bands. NuSTAR yielded previously unattainable sensitivity in the 3–79 keV range, revealing that the spectrum softens when the source is dimmer until the X-ray spectral shape saturates into a steep G » 3 power law, with no evidence for an exponential cutoff or additional hard components up "aprox" 80keV. For the first time, we observed both the synchrotron and the inverse-Compton peaks of the spectral energy distribution (SED) simultaneously shifted to frequencies below the typical quiescent state by an order of magnitude. The fractional variability as a function of photon energy shows a double-bump structure that relates to the two bumps of the broadband SED. In each bump, the variability increases with energy, which, in the framework of the synchrotron self-Compton model, implies that the electrons with higher energies are more variable. The measured multi band variability, the significant X-ray-toVHE correlation down to some of the lowest fluxes ever observed in both bands, the lack of correlation between optical/UV and X-ray flux, the low degree of polarization and its significant (random) variations, the short estimated electron cooling time, and the significantly longer variability timescale observed in the NuSTAR light curves point toward in situ electron acceleration and suggest that there are multiple compact regions contributing to the broadband emission of Mrk 421 during low-activity states.

Discovery of "isolated" co-moving T Tauri stars in Cepheus

Context. During the course of a large spectroscopic survey of X-ray active late-type stars in the solar neighbourhood, we discovered four lithium-rich stars packed within just a few degrees on the sky. Although located in a sky area rich in CO molecular regions and dark clouds, the Cepheus-Cassiopeia complex, these very young stars are projected several degrees away from clouds in front of an area void of interstellar matter. As such, they are very good "isolated" T Tauri star candidates. Aims. We present optical observations of these stars conducted with 1-2 m class telescopes. We acquired high-resolution optical spectra as well as photometric data allowing us to investigate in detail their nature and physical parameters with the aim of testing the "runaway" and "in-situ" formation scenarios. Their kinematical properties are also analyzed to investigate their possible connection to already known stellar kinematic groups. Methods. We use the cross-correlation technique and other tools developed by us to derive accurate radial and rotational velocities and perform an automatic spectral classification. The spectral subtraction technique is used to infer chromospheric activity level in the Hα line core and clean the spectra of photospheric lines before measuring the equivalent width of the lithium absorption line. Results. Both physical (lithium content, chromospheric, and coronal activities) and kinematical indicators show that all stars are very young, with ages probably in the range 10-30 Myr. In particular, the spectral energy distribution of TYC4496-780-1 displays a strong near-and far-infrared excess, typical of T Tauri stars still surrounded by an accretion disc. They also share the same Galactic motion, proving that they form a homogeneous moving group of stars with the same origin. Conclusions. The most plausible explanation of how these "isolated" T Tauri stars formed is the "in-situ" model, although accurate distances are needed to clarify their connection with the Cepheus-Cassiopeia complex. The discovery of this loose association of "isolated" T Tauri stars can help to shed light on atypical formation processes of stars and planets in low-mass clouds.

Produção de energia por mini e micro hidrelétricas na rede de distribuição de água.

A geração de energia hidrelétrica enfrenta uma crescente restrição a sua expansão, diretamente relacionada a fatores ambientais e da limitação de terrenos com potencial economicamente aproveitável. A partir deste fato, é relacionada uma possível fonte de energia hidrelétrica, resultante do aproveitamento dos potenciais presentes na rede de distribuição de água das cidades, ainda sem nenhum aproveitamento. O desenvolvimento desta fonte de energia se dá com a instalação de mini e micro centrais hidrelétricas nos condutos da rede distribuidora de água. Este trabalho tem por objetivo avaliar o potencial de aproveitamento hidrelétrico por mini e micro hidrelétricas por meio de técnicas de modelagem e de otimização, para agilizar e facilitar o procedimento de identificação dos potenciais e a instalação na rede de abastecimento. O trabalho leva em conta as diversas peculiaridades das redes de distribuição de água e dos equipamentos eletro-hidráulicos, discorrendo sobre a possível complementariedade da geração de energia durante os picos de consumo. Discorre também sobre a contribuição para a rede de distribuição elétrica, na logística e nos custos de implantação além de discutir a tipologia das turbinas capazes de aproveitar o potencial energético. É avaliado, com o auxilio de modelos hidráulicos e de otimização, o posicionamento das centrais geradoras na rede e os possíveis benefícios, restrições e impedimentos ao seu uso, desenvolvendo uma metodologia para facilitar a tomada de decisão quanto ao aproveitamento para geração, ou não, em redes diversas. A construção deste procedimento e ferramenta são desenvolvidos a partir do estudo de caso do sistema distribuidor de água do Município de Piquete no estado de São Paulo, Brasil.

Localização de usinas termoelétricas utilizando Sistema de Informação Geográfica e métodos de decisão multicritério

No setor de energia elétrica, a área que se dedica ao estudo da inserção de novos parques geradores de energia no sistema é denominada planejamento da expansão da geração. Nesta área, as decisões de localização e instalação de novas usinas devem ser amplamente analisadas, a fim de se obter os diversos cenários proporcionados pelas alternativas geradas. Por uma série de fatores, o sistema de geração elétrico brasileiro, com predominância hidroelétrica, tende a ser gradualmente alterada pela inserção de usinas termoelétricas (UTEs). O problema de localização de UTEs envolve um grande número de variáveis através do qual deve ser possível analisar a importância e contribuição de cada uma. O objetivo geral deste trabalho é o desenvolvimento de um modelo de localização de usinas termoelétricas, aqui denominado SIGTE (Sistema de Informação Geográfica para Geração Termoelétrica), o qual integra as funcionalidades das ferramentas SIGs (Sistemas de Informação Geográfica) e dos métodos de decisão multicritério. A partir de uma visão global da área estudada, as componentes espaciais do problema (localização dos municípios, tipos de transporte, linhas de transmissão de diferentes tensões, áreas de preservação ambiental, etc.) podem ter uma representação mais próxima da realidade e critérios ambientais podem ser incluídos na análise. Além disso, o SIGTE permite a inserção de novas variáveis de decisão sem prejuízo da abordagem. O modelo desenvolvido foi aplicado para a realidade do Estado de São Paulo, mas deixando claro a viabilidade de uso do modelo para outro sistema ou região, com a devida atualização dos bancos de dados correspondentes. Este modelo é designado para auxiliar empreendedores que venham a ter interesse em construir uma usina ou órgãos governamentais que possuem a função de avaliar e deferir ou não a licença de instalação e operação de usinas.

Risco de mercado na comercialização de energia elétrica: uma análise estruturada com foco no ambiente de contratação livre - ACL.

A motivação para o desenvolvimento desse trabalho surge em um momento em que se verifica uma participação cada vez mais significativa das fontes energéticas renováveis não convencionais no País. Não obstante, o cenário de evolução evidencia que o arcabouço regulatório e as regras de mercado não acompanharam as especificidades inerentes à exploração dessas fontes. Assim, para que se mantenha adequado ritmo de inserção na matriz energética, devem ser buscadas opções para que fontes alternativas sejam cada vez mais competitivas na atual configuração do mercado energético. A contribuição dessa pesquisa, portanto, centra-se na análise dos riscos de mercado incorridos por esses geradores de fontes intermitentes de energia ao comercializarem energia no ambiente de contratação livre. Nessa perspectiva, a Dissertação foi desenvolvida abordando tipos de geração de energia e suas características técnicas e econômicas, legislação do setor elétrico, regras de comercialização, balanço energético do sistema, formação de preços no mercado de curto prazo e precificação de contratos no ACL, diferença de preços entre submercados, requisitos de flexibilidade e sazonalidade nos contratos de venda a consumidores livres e seu impacto na precificação de contratos, identificação de comportamento energético complementar para mitigação de riscos de mercado entre fontes renováveis e rebatimento na formulação de mecanismo de hedge, análise de portfólio de contratos e estratégia ótima de contratação de energia para agentes geradores atuando no ACL. Como resposta ao desafio de equacionar o impasse surgido na comercialização de fontes de produção sazonal, propõe-se um modelo para definir estratégias de contratação para agentes geradores e comercializadores a partir da complementação energética entre diferentes tipos de fontes, de forma a maximizar os ganhos de comercialização para um risco estabelecido. Busca-se a composição ideal dessas fontes na carteira de um comercializador para minimizar o risco de exposição à volatilidade dos preços do mercado de curto prazo. Isso é possível em virtude das compensações energéticas feitas entre as diferentes fontes em um portfólio combinado, mitigando a receita em risco decorrente das variações que existem nos preços de curto prazo e na produção energética. De forma complementar, estruturou-se um modelo de negócio no qual uma empresa detentora de ativos de geração hidrelétrica compra os direitos de produção de uma eólica e/ou biomassa para incorporar ao seu portfólio e vender como contrato por quantidade. Determinou-se o volume de energia a ser comprado de cada fonte, o preço, a estratégia mais indicada de contratação e a mitigação de fatores de risco contemplados nos contratos de venda, buscando maximizar os ganhos de comercialização condicionada a critérios de risco pré-fixados.

Pseudocapacitance of zeolite-templated carbon in organic electrolytes

Carbon and graphene-based materials often show some amount of pseudocapacitance due to their oxygen-functional groups. However, such pseudocapacitance is generally negligible in organic electrolytes and has not attracted much attention. In this work, we report a large pseudocapacitance of zeolite-templated carbon (ZTC) based on the oxygen-functional groups in 1 M tetraethylammonium tetrafluoroborate dissolved in propylene carbonate (Et4NBF4/PC). Due to its significant amount of active edge sites, a large amount of redox-active oxygen functional groups are introduced into ZTC, and ZTC shows a high specific capacitance (330 F g−1). Experimental results suggest that the pseudocapacitance could be based on the formation of anion and cation radicals of quinones and ethers, respectively. Moreover, ZTC shows pseudocapacitance also in 1 M lithium hexafluorophosphate dissolved with a mixture of ethylene carbonate and diethyl carbonate (LiPF6/EC+DEC) which is used for lithium-ion batteries and lithium-ion capacitors.

Multiwavelength study of the fast rotating supergiant high-mass X-ray binary IGR J16465−4507

Context. Since its launch, the X-ray and γ-ray observatory INTEGRAL satellite has revealed a new class of high-mass X-ray binaries (HMXB) displaying fast flares and hosting supergiant companion stars. Optical and infrared (OIR) observations in a multi-wavelength context are essential to understand the nature and evolution of these newly discovered celestial objects. Aims. The goal of this multiwavelength study (from ultraviolet to infrared) is to characterise the properties of IGR J16465−4507, to confirm its HMXB nature and that it hosts a supergiant star. Methods. We analysed all OIR, photometric and spectroscopic observations taken on this source, carried out at ESO facilities. Results. Using spectroscopic data, we constrained the spectral type of the companion star between B0.5 and B1 Ib, settling the debate on the true nature of this source. We measured a high rotation velocity of v = 320 ± 8km s-1 from fitting absorption and emission lines in a stellar spectral model. We then built a spectral energy distribution from photometric observations to evaluate the origin of the different components radiating at each energy range. Conclusions. We finally show that, having accurately determined the spectral type of the early-B supergiant in IGR J16465−4507, we firmly support its classification as an intermediate supergiant fast X-ray transient (SFXT).

Natural resources on the Russian continental shelf: Foreign investors sought... on Russian terms. OSW Commentary No. 76, 2012-05-09

In recent weeks, Rosneft, a Russian state-owned oil company, has signed co-operation agreements with three Western corporations: America’s ExxonMobil, Italy’s Eni, and Norway’s Statoil. In exchange for access to Russian oil fields on the continental shelf as minority shareholders, these Western investors will finance and carry out exploration there. They will also offer to Rosnieft technology transfer, staff exchange and the purchase of shares in their assets outside Russia (for example in the North Sea or in South America). Rosneft’s deals with Western energy companies prove that the Russian government is resuming the policy of a controlled opening-up of the Russian energy sectors to foreign investors which it initiated in 2006. So far, investors have been given access to the Russian electric energy sector and some onshore gas fields. The agreements which have been signed so far also allow them to work on the Russian continental shelf. This process is being closely supervised by the Russian government, which has enabled the Kremlin to maintain full control of this sector. The primary goal of this policy is to attract modern technologies and capital to Russia and to gain access to foreign assets since this will help Russian corporations to reinforce their positions in international markets. The signing of the above agreements does not guarantee that production will commence. These are a high-risk projects. It remains uncertain whether crude can be extracted from those fields and whether its development will be cost-effective. According to estimates, the Russian Arctic shelf holds approximately 113 billion tonnes of hydrocarbons. The development of these fields, including building any necessary infrastructure, may consume over US$500 billion within 30 years. Furthermore, the legal regulations currently in force in Russia do not guarantee that foreign investors will have a share in the output from these fields. Without foreign support, Russian companies are unlikely to cope with such technologically complicated and extremely expensive investments. In the most optimistic scenario, the oil production in the Russian Arctic may commence in fifteen to twenty years at the earliest.

Patenting Systems, Patentable Subject Matter, and Prior Art

The International School of Solid State Physics presented the 56th Course"Materials for Renewable Energy” in Erice (Italy), from July 18th to 28th 2012. This course was sponsored by the Italian Ministry of Education, University and Scientific Research, the Materials Research Society and the European Materials Research Society. The event was hosted at the "Ettore Majorana Foundation and Centre for Scientific Culture”. The school reviewed critical materials issues for the production and storage of renewable and sustainable energy. The aim of the School was to present the state-of-the-art and future perspectives in this critical area. It was to bring together the international community of students, young scientists, and experts in a unique atmosphere for reciprocal benefits in terms of enthusiasm, knowledge and new ideas.

The Product is progress : Rural Electrification in Costa Rica /

"October 1981."