Role of G protein coupled inwardly rectifier K+ channels (GIRK) on the neurobiology depression

353 págs.

Fischbestände der Ostsee, ihre Entwicklung seit 1970 und Schlussfolgerungen für ihre fischereiliche Nutzung - Teil 2: Hering

The herring of the Baltic Sea shows a complicated population structure. Comparable to herring in other areas it can also be discriminated as spring and autumn spawning herring. Autumn spawning herring has been nearly vanished since the late 1960’s. Baltic Sea spring spawning herring show a broad variety as far as morphometric and other biological characteristics are concerned. It seems not very likely that all those differences are genetically based. The spawning sites of populations are, however, often clearly separated and such groups of herring are in most cases characterized by distinct differences in individual growth. Therefore for assessment purposes it is necessary to distinguish between as small as possible units in order to not endanger smaller populations to become extinct by overexploitation. On the other hand migrations and mixing of herring of different origin especially during the summer feeding period result in extreme difficulties of the discrimination of small units. For this reason only three herring assess ment units have been identified for the central and the northern Baltic Sea: herring in Sub-divisions 25–32+32, herring in Sub-division 30 and herring in Sub-division31. The spring spawning herring of the western Baltic Sea has been combined with spring spawning herring in Division IIIa. Only the herring stock in Sub-division 30 shows a positive development in the past. The largest assessment unit in Sub-divisions 25–29+32 decreased continuously during the whole period 1974–1998. The western Baltic Spring spawning herring stock decreased from 1990 to 1996. There is an ongoing debate on scientific level whether the combination of small populations into large assessment units like the one in S-D’s 25–29&32 might include the danger of the extinction of small compartments of the unit. On the other hand the practice by the International Baltic Sea Fishery Commission of managing the Baltic Sea herring fisheries by dividing a yearly Total Allowable Catch for the whole area among fishery zones without taking care of any biological structure and any individual stock development is totally against the idea of sustainability of fisheries.

Mehr Nachwuchs bei Nutzfischarten der Nordsee, ausser beim Kabeljau

Ninety-one half-hour tows with the Grande Ouverture Verticale bottom trawl (GOV), 111 hydrographic stations and 100 catches with the Methot-Isaac-Kidd Net (MIK) were this years’ contribution of “Walther Herwig III” to the IBTS in various areas of the North Sea. Preliminary results indicate that especially haddock and, to some extent, whiting and Norway pout generated an ample 1999 yearclass. Indices for herring are also well above last years’ index whereas the cod indices indicate no substantial improvement of the stock. Largest concentrations of herring larvae were found in Moray Firth and west of the Dogger Bank/The Gut area. Temperatures of the North Sea were found to be above the long term means: 1 Centigrade on the open sea and up to 3 Centigrades in coastal areas. This years’ “WH III” IBTS activities at sea were considerably hampered by rough weather

Laichen von Dorschen in Gefangenschaft. Teil 2: Eiqualität und Befruchtungsrate

The quality of eggs spawned by cod of the western Baltic Sea, which were kept in captivity, varies during spawning season. These changes were independent of total length, weight and age of the parental individuals. Diameter, dry weight and fertilisation rate of the spawned eggs decreased during the spawning activities. An influence of water temperature and salinity on the variability of these parameters could not be detected. Diameter, weight and fertilisation rate were, however, influenced by the stage of the spawning process of the parental individuals. These results point out that within the first half of the spawning season not only the largest portion of the fertilised eggs was spawned but also those eggs with the best chance of a successful development.

Evaluating governance and participatory processes in Natura 2000: lessons learned and guidance for future prospects

In recent years, participatory approaches have been incorporated in decision-making processes as a way to strengthen the bonds between diverse areas of knowledge and social actors in natural resources management and environmental governance. Despite the favourable context, this paradigm shift is still in an early stage within the development of the Natura 2000 in the European Union, the largest network of protected areas in the world. To enhance the full scope of participatory approaches in this context, this article: (i) briefly reviews the role of participatory approaches in environmental governance, (ii) develops a common framework to evaluate such participatory processes in protected area management, (iii) applies this framework to a real case study, and (iv) based on the lessons learned, provides guidance to improve the future governance of Natura 2000 sites.

Market survey of the periwinkle Tympanotonus fuscatus in Rivers State: Sizes, prices, trade routes and exploitation levels

Tympanotonus fuscatus was collected from 23 markets through Rivers State (Nigeria), a few in neighbouring states, and from an unexploited population at Buguma. The size distribution of shells was determined,and information on prices and trade routes was also obtained. The mean shell length of specimens from the unexploited Buguma population was 46.4 mm, compared to 30.4 mm for the Buguma market samples. Mean sizes in other markets showed a geographic pattern: the smallest were from the Adoni-Ogoni-Opobo sector (28.1-30.9); the largest were from the Nembe-Brass sector (37.7-44.2) and Bendel State (35.7-45.6); The results suggest the population structure of Tympanotonus in much of Rivers State has been strongly impacted by overharvesting. They show that local market as well as some in Cross River State, are increasingly being supplied by road with specimens from the Benin River area of Bendel State. Differences between shell types; and relations between shell size, selling price and market distance from source, are also discussed

A study on the growth of Pseudotolithus elongatus, Chrysichthys nigrodigitatus and Cynoglossus goreensis occurring in the Cross River Estuary

Samples of Pseudotolithus elongatus, Chrysichthys nigrodigitatus and Cynoglosus goreensis obtained from the Cross River Estuary (which is most probably the largest estuary water system along the coast of West Africa) between January 1980 and May 1981 were evaluated on basis of population dynamic analytical method postulated by Pauly (1980) for tropical fish stocks. Growth parameters were obtained for the fish species. Wherever possible, these results were compared to those obtained by Longhurst (1964d) and LeGuen (1971) in other West African waters. On the whole, results obtained in this study tend to indicate that the growth of the croaker, bagrid catfish and the sole in the Cross River Estuary is allometric, the third and fourth year-classes of P. elongatus the second and third class-year of C. nigrodigitatus and the fourth, fifth and sixth year classes of C. goreensis dominated in the age distribution of these fish species

Boiling heat transfer enhancement by using micro-pin-finned surface for electronics cooling

For efficiently cooling electronic components with high heat flux, experiments were conducted to study the flow boiling heat transfer performance of FC-72 over square silicon chips with the dimensions of 10 × 10 × 0.5 mm3. Four kinds of micro-pin-fins with the dimensions of 30 × 60, 30 × 120, 50 × 60, 50 × 120 μm2 (thickness, t × height, h) were fabricated on the chip surfaces by the dry etching technique for enhancing boiling heat transfer. A smooth surface was also tested for comparison. The experiments were made at three different fluid velocities (0.5, 1 and 2 m/s) and three different liquid subcoolings (15, 25 and 35 K). The results were compared with the previous published data of pool boiling. All micro-pin-fined surfaces show a considerable heat transfer enhancement compared with a smooth surface. Flow boiling can remarkably decrease wall superheat compared with pool boiling. At the velocities lower than 1 m/s, the micro-pin-finned surfaces show a sharp increase in heat flux with increasing wall superheat. For all surfaces, the maximum allowable heat flux, qmax, for the normal operation of LSI chips increases with fluid velocity and subcooling. For all micro-pin-finned surfaces, the wall temperature at the critical heat flux (CHF) is less than the upper limit for the reliable operation of LSI chips, 85◦C. The largest value of qmax can reach nearly 148 W/cm2 for micro-pin-finned chips with the fin height of 120 μm at the fluid velocity of 2 m/s and the liquid subcooling of 35 K. The perspectives for the boiling heat transfer experiment of the prospective micro-pin-finned sur- faces, which has been planned to be made in the Drop Tower Beijing/NMLC in the future, are also presented.

A block SPP algorithm for multidimensional tridiagonal equations with optimal message vector length

A parallel strategy for solving multidimensional tridiagonal equations is investigated in this paper. We present in detail an improved version of single parallel partition (SPP) algorithm in conjunction with message vectorization, which aggregates several communication messages into one to reduce the communication cost. We show the resulting block SPP can achieve good speedup for a wide range of message vector length (MVL), especially when the number of grid points in the divided direction is large. Instead of only using the largest possible MVL, we adopt numerical tests and modeling analysis to determine an optimal MVL so that significant improvement in speedup can be obtained.

A review paper on Integrated Aquaculture Benefits Project at Federal College of Forestry, Ibadan

This paper highlights some of the practices involved in integrated aquaculture such as poultry-cum-fish, pig-cum-fish, sheep and goat-cum-fish and grasscutter-cum-fish. Also the role of fisheries in alleviating protein deficiency was reviewed. Successful research findings on these practices in aquaculture at the Federal College of Forestry, Jericho, Ibadan (Nigeria) will eventually lead to alleviating protein deficiency of the inhabitants of the largest city in West African thus alleviating poverty in the nation

The survey of Lake Victoria's fishers

The findings are presented of a survey conducted regarding the fishers of Lake Victoria, which examined the relationships affecting supply flows of raw material on to the market, and also the characteristics of fishing activities and their effects on fish quality and distribution. Fish marketing plays a vital role in the lives of much of the lake basin's population, both in terms of employment and nutrition. The results of the survey comprise, in part, a base-line data set which will facilitate further research, analysis and management decision-making in relation to stakeholders of the lake's resources. Data collection, methods and research difficulties encountered are described and details given of a profile of a boat owner/renter and aslo of a profile of a crew member. The survey shows that Lake Victoria's fishery is one of very limited diversity. The fishers recount that they consistently target one or more of the 3 most common species within the lake (Nile perch, tilapia and dagaa) and very rarely consider any other species type. The largest proportion of fishers on the lake are Nile perch fishers; there is considerable demand for this species, and hence fishers have little incentive to either target alternative fish species, not to try and establish firm marketing outlets through the creation of arrangements with their principal buyers. In Kenyan waters, however, the number of Nile perch fishers is equaled by the number of dagaa fishers; this fish now commands a considerable portion of the market for fish from Lake Victoria through its availability as well as its relatively low prices. The tilapia fishery is in decline, and all 3 riparian states would not appear to be attracting investment almost certainly as a result of declining catches. For many of those working in Lake Victoria's fishery, the problems faced appear most often to be associated with the vagaries of an unstable market which may rise or fall depending on the state of the international market or the state of access roads to fish landings. (PDF contains 42 pages)

Technological status and development prospects of small-scale fishing crafts in Nigerian coastal water

A study of fishing crafts was conducted in some coastal states of Nigeria to elucidate findings on the existing crafts as the baseline for further developments. Based on the technical designs, three types of fishing crafts were identified; planked, dug-out and half dug-out canoes. The planked canoes have the largest cubic number and dug-out canoes the least. At loadwater line, the ratio of freeboard to draft was 2 : 1 for planked canoes, indicating reserved buoyancy. Trim of planked canoe is by stern; the beam-length ratio for dug-out canoes showed high drag. Most of the sea-going canoes have U-shaped bottom hull profile capable of withstanding the rigours of surf landing and displayed good stability against longitudinal water wave. Gunwale and thwarts provided respectively the longitudinal and transverse strength of planked and half dug-out canoes. With its characteristics 'weight low down' construction, planked canoe represent the climax of small scale fishing crafts developments in Nigerian coastal waters. It's only draw back is durability. Further improvement in this canoe should be aimed at increasing the hull size and stiffness, water tightness of deck by coating, caulking, fastening, increasing level of motorization and installation of deck working equipments. Experimental design and use of fibre glass, aluminium and ferrocement hulls, together with improved planked canoe is highly advocated

Non-governmental organizations and multi-sited marine conservation science: A case study

Non-governmental organizations (NGOs) are now major players in the realm of environmental conservation. While many environmental NGOs started as national organizations focused around single-species protection, governmental advocacy, and preservation of wilderness, the largest now produce applied conservation science and work with national and international stakeholders to develop conservation solutions that work in tandem with local aspirations. Marine managed areas (MMAs) are increasingly being used as a tool to manage anthropogenic stressors on marine resources and protect marine biodiversity. However, the science of MMA is far from complete. Conservation International (CI) is concluding a 5 year, $12.5 million dollar Marine Management Area Science (MMAS) initiative. There are 45 scientific projects recently completed, with four main “nodes” of research and conservation work: Panama, Fiji, Brazil, and Belize. Research projects have included MMA ecological monitoring, socioeconomic monitoring, cultural roles monitoring, economic valuation studies, and others. MMAS has the goals of conducting marine management area research, building local capacity, and using the results of the research to promote marine conservation policy outcomes at project sites. How science is translated into policy action is a major area of interest for science and technology scholars (Cash and Clark 2001; Haas 2004; Jasanoff et al. 2002). For science to move policy there must be work across “boundaries” (Jasanoff 1987). Boundaries are defined as the “socially constructed and negotiated borders between science and policy, between disciplines, across nations, and across multiple levels” (Cash et al. 2001). Working across the science-policy boundary requires boundary organizations (Guston 1999) with accountability to both sides of the boundary, among other attributes. (Guston 1999; Clark et al. 2002). This paper provides a unique case study illustrating how there are clear advantages to collaborative science. Through the MMAS initiative, CI built accountability into both sides of the science-policy boundary primarily through having scientific projects fed through strong in-country partners and being folded into the work of ongoing conservation processes. This collaborative, boundary-spanning approach led to many advantages, including cost sharing, increased local responsiveness and input, better local capacity building, and laying a foundation for future conservation outcomes. As such, MMAS can provide strong lessons for other organizations planning to get involved in multi-site conservation science. (PDF contains 3 pages)

New technologies driving decade-bandwidth radio astronomy : quad-ridged flared horn and compound-semiconductor LNAs

Among the branches of astronomy, radio astronomy is unique in that it spans the largest portion of the electromagnetic spectrum, e.g., from about 10 MHz to 300 GHz. On the other hand, due to scientific priorities as well as technological limitations, radio astronomy receivers have traditionally covered only about an octave bandwidth. This approach of "one specialized receiver for one primary science goal" is, however, not only becoming too expensive for next-generation radio telescopes comprising thousands of small antennas, but also is inadequate to answer some of the scientific questions of today which require simultaneous coverage of very large bandwidths.

This thesis presents significant improvements on the state of the art of two key receiver components in pursuit of decade-bandwidth radio astronomy: 1) reflector feed antennas; 2) low-noise amplifiers on compound-semiconductor technologies. The first part of this thesis introduces the quadruple-ridged flared horn, a flexible, dual linear-polarization reflector feed antenna that achieves 5:1-7:1 frequency bandwidths while maintaining near-constant beamwidth. The horn is unique in that it is the only wideband feed antenna suitable for radio astronomy that: 1) can be designed to have nominal 10 dB beamwidth between 30 and 150 degrees; 2) requires one single-ended 50 Ohm low-noise amplifier per polarization. Design, analysis, and measurements of several quad-ridged horns are presented to demonstrate its feasibility and flexibility.

The second part of the thesis focuses on modeling and measurements of discrete high-electron mobility transistors (HEMTs) and their applications in wideband, extremely low-noise amplifiers. The transistors and microwave monolithic integrated circuit low-noise amplifiers described herein have been fabricated on two state-of-the-art HEMT processes: 1) 35 nm indium phosphide; 2) 70 nm gallium arsenide. DC and microwave performance of transistors from both processes at room and cryogenic temperatures are included, as well as first-reported measurements of detailed noise characterization of the sub-micron HEMTs at both temperatures. Design and measurements of two low-noise amplifiers covering 1--20 and 8—50 GHz fabricated on both processes are also provided, which show that the 1--20 GHz amplifier improves the state of the art in cryogenic noise and bandwidth, while the 8--50 GHz amplifier achieves noise performance only slightly worse than the best published results but does so with nearly a decade bandwidth.

Growth and characterization of novel, III-V semiconductor heterostructures

The material presented in this thesis concerns the growth and characterization of III-V semiconductor heterostructures. Studies of the interactions between bound states in coupled quantum wells and between well and barrier bound states in AlAs/GaAs heterostructures are presented. We also demonstrate the broad array of novel tunnel structures realizable in the InAs/GaSb/AlSb material system. Because of the unique broken-gap band alignment of InAs/GaSb these structures involve transport between the conduction- and valence-bands of adjacent layers. These devices possess a wide range of electrical properties and are fundamentally different from conventional AlAs/GaAs tunnel devices. We report on the fabrication of a novel tunnel transistor with the largest reported room temperature current gains. We also present time-resolved studies of the growth fronts of InAs/GainSb strained layer superlattices and investigations of surface anion exchange reactions.

Chapter 2 covers tunneling studies of conventional AlAs/GaAs RTD's. The results of two studies are presented: (i) A test of coherent vs. sequential tunneling in triple barrier heterostructures, (ii) An optical measurement of the effect of barrier X-point states on Γ-point well states. In the first it was found if two quantum wells are separated by a sufficiently thin barrier, then the eigenstates of the system extend coherently across both wells and the central barriers. For thicker barriers between the wells, the electrons become localized in the individual wells and transport is best described by the electrons hopping between the wells. In the second, it was found that Γ-point well states and X-point barrier states interact strongly. The barrier X-point states modify the energies of the well states and increase the escape rate for carriers in the quantum well.

The results of several experimental studies of a novel class of tunnel devices realized in the InAs/GaSb/AlSb material system are presented in Chapter 3. These interband tunnel structures involve transport between conduction- and valence-band states in adjacent material layers. These devices are compared and contrasted with the conventional AlAs/GaAs structures discussed in Chapter 2 and experimental results are presented for both resonant and nonresonant devices. These results are compared with theoretical simulations and necessary extensions to the theoretical models are discussed.

In chapter 4 experimental results from a novel tunnel transistor are reported. The measured current gains in this transistor exceed 100 at room temperature. This is the highest reported gain at room temperature for any tunnel transistor. The device is analyzed and the current conduction and gain mechanisms are discussed.

Chapters 5 and 6 are studies of the growth of structures involving layers with different anions. Chapter 5 covers the growth of InAs/GainSb superlattices for far infrared detectors and time resolved, in-situ studies of their growth fronts. It was found that the bandgap of superlattices with identical layer thicknesses and compositions varied by as much as 40 meV depending on how their internal interfaces are formed. The absorption lengths in superlattices with identical bandgaps but whose interfaces were formed in different ways varied by as much as a factor of two. First the superlattice is discussed including an explanation of the device and the complications involved in its growth. The experimental technique of reflection high energy electron diffraction (RHEED) is reviewed, and the results of RHEED studies of the growth of these complicated structures are presented. The development of a time resolved, in-situ characterization of the internal interfaces of these superlattices is described. Chapter 6 describes the result of a detailed study of some of the phenomena described in chapter 5. X-ray photoelectron spectroscopy (XPS) studies of anion exchange reactions on the growth fronts of these superlattices are reported. Concurrent RHEED studies of the same physical systems studied with XPS are presented. Using the RHEED and XPS results, a real-time, indirect measurement of surface exchange reactions was developed.