Studies on carbon-13 turnover in eggs and blood of commercial layers

This paper aimed at evaluating the influence of diets containing different isotopic values of carbon-13 turnover on the half-life of egg (yolk + albumen), yolk and albumen individually, and blood of poultry using δ‰ 13C isotopic variation. Commercial layers fed four experimental isocaloric and isonitrogenous diets (RC 4, RC 3, RMC 4 and RMC 3) containing different isotopic values, during an experimental period of 56 days. Turnover of the studied tissues was influenced by the experimental diets. Blood and albumen were more influenced by dietary treatments as compared to egg and yolk. The RMC 3 diet induced better performance (better feed intake and higher egg production) due faster rate of carbon substitution than the RC 4 diet, and lower half-life for egg (yolk + albumen), yolk, and albumen.

Carbon isotope composition as a tool for quality control of herbs, spices and medicinal plants

Isotope screening is a simple and cheap test for determining the photosynthetic pathway used by plants. The scope of this work was to classify the photosynthetic type of Melissa officinalis L. and Cymbopogon citratus [DC.] Stapf, through studies of the carbon isotope composition (δ13 C), and we are proposing the use of carbon isotope composition results as a tool to control the quality of medicinal plants. For studies of δ 13C (13 C% = [R (sample)/R (standard) - 1] × 10 -3), dried, powdered leaves were analyzed in a mass spectrometer coupled with an elemental analyzer for determining the ratio R (R = 13CO2/12CO2). As results, M. officinalis presented a C3 photosynthetic type, and C. citratus presented a C4 photosynthetic type. The carbon isotope composition from this study can be used as quality control of M. officinalis adulterants.

Characterization and environmental interpretation of a floodplain Holocene paleosoil: Implications for paleohydrological reconstructions in the Upper Paraná River, Brazil

Alluvial paleosoil horizons from the 3 to 4 m high banks of the Paraná River were used to reconstruct the palaeoenvironmental history and palaeohydrological regime of the river. The bank consists of a Middle to Late Holocene sequence of sandy to silty clay layers of overbank deposits. The paleosoil horizon is located to a depth of 1.95 m from the top of the bank and is recognized as a guide horizon throughout the floodplain of the Upper Paraná River floodplain. Analyses of organic matter (δ13C and humic/fulvic acids), palynology (pollen and charcoal fragments), magnetic susceptibility, micromorphology, x-ray diffraction and 14C dating were conducted for samples from two representative profiles of the study area. Two phases were characterized in the history of the river: 1) An older phase, of stability in fluvial hydrology (stasis) with low frequency of floods, which produced conditions for soil development (14C 1700 ± 70 yr. BP). At this period, the predominance of herbaceous vegetation (determinated by pollen and δ13C analyses) suggests a climate less humid than the present one, and 2) A second phase, when climate changed to the present conditions of humidity (annual rain fall of 1600 rum) and characterized by the predominance of C3 plants. Under this new hydrological regime, the river developed an agradational floodplain, with a depositional sedimentary rate of 1.2 mm.y-1. © 2006 Gebrüder Borntraeger.

Structure and properties of Brazilian peat: Analysis by spectroscopy and microscopy

Peat was taken from the Sergipe State, Brazil and characterized by several techniques: elemental and thermal analyses; Fourier infrared (FTIR) and solid state 13C nuclear magnetic resonance (NMR) spectroscopies; scanning electron microscopy (SEM), environmental scanning electron microscopy (ESEM) and X-ray diffractometry (XRD). Also, the Sergipe State peat samples were compared with other peat sample from later from Sao Paulo State, Brazil. The lowest O/C and E 4/E 6 ratios and differential thermal analysis (DTA) curves of the Santo Amaro (SAO) sample indicated that this sample had the highest degree of decomposition. FTIR results showed that Itabaiana (ITA) and São Paulo (SAP) samples presented more prominent peak at 1086 cm -1 attributed the presence of Si-O than SAO sample spectra. The SAO sample showed two more intense peaks at 2920 cm -1 and 2850 cm -1. These results were corroborated by 13C NMR and thermal gravimetric (TG) where the relative abundance of the alkyl-C groups was greater in the SAO sample. The X-ray diffractometry (XRD) of SAO sample is characteristic of amorphous matter however, the SAP and ITA samples revealed the large presence of quartz mineral. The scanning electron microscopy (SEM) and environmental scanning electron microscopy (ESEM) showed that the surface of peat samples have porous granules of organic material. The ITA and SAP peat samples are alike while SAO peat sample is richer in organic material. Only the SAO sample has truthful characteristics of peat. The results of this study showed that the samples are very different due to variable inorganic and organic material contents. ©2007 Sociedade Brasileira de Química.

A new ent-kaurane diterpene from stems of Alibertia macrophylla K. Schum. (Rubiaceae)

Phytochemical investigations of the stems of a specimen of Alibertia macrophylla led to the isolation and characterization of the new diterpene ent-kaurane-2β,3α,16α-triol (1), along with triterpenes 2-8, iridoids 9-12, and phenolic acids 13-15. The structure of 1 was established based on spectroscopic studies (1H- and 13C-NMR, IR, and HR-ESI-MS). This is the first report of the isolation of a diterpene from the Alibertia genus in Rubiaceae. © 2007 Verlag Helvetica Chimica Acta AG.

Biosynthetic origin of the isoprene units in chromenes of Piper aduncum (Piperaceae)

Metabolic studies involving the incorporation of [1-13C]-D- glucose into intact leaves of Piper aduncum (Piperaceae) have indicated that both the mevalonate (MVA) and the pyruvate-triose (MEP) non-mevalonate pathways are implicated in the biosynthesis of isoprene moieties present in methyl 2,2-dimethyl-2H-1-chromene-6-carboxylate (1) and methyl 2,2-dimethyl-8- (3′-methyl-2′-butenyl)-2H-1-chromene-6-carboxylate (2). The pattern of incorporation of label from [1-13C]-D-glucose into these chromenes was determined by quantitative 13C NMR spectroscopy. The results confirmed that biosynthetic compartment of 1 and 2 could either be the plastid and/ or the cytosol or, possibly, an additional compartment such as the plastid inter-membrane space. ©2007 Sociedade Brasileira de Química.

Flavonóides de Calotropis procera R. Br. (Asclepiadaceae)

In this work we report the identification of two flavonol glycosides isolated from the leaves of Calotropis procera R. Br. (Asclepiadaceae), a plant species with large occurrence in Northwest of Brazil with some applications in folk medicine. Some proved pharmacological activities in this species could be attributed to the presence of flavonol glycosides. The extraction and isolation of flavonol glycosides was carried out firstly by a liquid-liquid partition, and then by elution of n-BuOH fraction with MeOH over a Sephadex LH-20 column. The identification of flavonol glycosides isorhamnetin-3-O-rutinoside (1), and isorhamnetin-3-O-robinobioside (2), was obtained by 1H and 13C NMR, one- and two-dimensional techniques.

Síntese e atividade biológica do derivado 6-formil-oxamniquina

Schistosomiasis, an important disease in Brazil, is caused by a trematode of the genus Schistosoma, reaching millions of person in one of the most endemic region of this disease in the whole globe. The main goal of this work was to syntetize the 6-formyl- oxamniquine derivative and evaluate its biological activity. The 6-formyl-oxamniquine derivative was obtained by the oxidation of oxamniquine with MnO 2, applying CH 2Cl 2 as solvent at room temperature for 24 hours. The obtaintion of 6-formyl-oxamniquine derivative compound was confirmed by IR spectroscopy and 13C NMR and 1H NMR, presenting similar activity when compared to the commercial oxamniquine (Mansil®).

Polissacarídeos de parede celular fúngica: purificação e caracterização

The cell wall is a rigid structure essential for the survival of fungi. A knowledge of its composition is therefore useful for the development of novel anti-fungal drugs. In this context, polysaccharides as main components of the fungal cell wall have been the subject of intense scientific study over the years. The information gained from the knowledge of the structure of these macrobiomolecules could therefore be valuable in elucidating the mechanisms of their biosynthesis in the cell walls of pathogenic fungi infecting plants and animals alike. Determination of the chemical structures of these polysaccharides (endo) is preceded by their extraction and purification. The extractions, generally lead to neutral and/ or alkaline soluble biopolymers in groups according to their solubilities. Mixtures of polysaccharides in these extracts can then be purified by a combination of chemical and chromatographic methods. Following purification, the polysaccharides, considered homogeneous, can be characterized structurally using conventional techniques of carbohydrate chemistry, such as hydrolysis, methylation analysis, and FT-IR, 13C- and 1H- NMR spectroscopy. This review surveys the main scientific literature that characterizes polysaccharides constituting the fungal cell wall.

Alocação de fotoassimilados marcados e relação fonte-dreno em figueiras cv. Roxo de Valinhos. 1. Relação fonte e dreno

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Alocação de fotoassimilados marcados e relação fonte-dreno em figueiras cv. Roxo de Valinhos. 2. Tempo de alocação

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Study of adsorption and preconcentration by using a new silica organomodified with [3-(2,2′-dipyridylamine)propyl] groups

In this work, a silica surface chemically modified with [3-(2,2′-dipyridylamine)propyl] groups, named [3-(2,2′- dipyridylamine)propyl]silica (Si-Pr-DPA) was prepared, characterized, and evaluated for its heavy metal adsorption characteristics from aqueous solution. To our knowledge, we are the first authors who have reported the present modification. The material was characterized using infrared spectroscopy, SEM, and NMR 29Si and 13C solid state. Batch and column experiments were conducted to investigate for heavy metal removal from dilute aqueous solution by sorption onto Si-Pr-DPA. From a number of studies the affinity of various metal ions for the Si-Pr-DPA sorbent was determined to follow the order Fe(III) > Cr(III) >> Cu(II) > Cd(II) > Pb(II) > Ni(II). Two standard reference materials were used for checking the accuracy and precision of the method. The proposed method was successfully applied to the analysis of environmental samples. This ligand material has great advantage for adsorption of transition-metal ions from aqueous medium due to its high degree of organofunctionalization associated with the large adsorption capacity, reutilization possibility, and rapidity in reaching the equilibrium. © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Preconcentration and determination of metal ions from fuel ethanol with a new 2,2'-dipyridylamine bonded silica

A silica surface chemically modified with [3-(2,2'-dipyridylamine) propyl] groups was prepared, characterized, and evaluated for its metal ion preconcentration in fuel ethanol. To our knowledge, we are the first authors who have reported the present modification on silica gel surface. The material was characterized using infrared spectra, scanning electronic microscopy, and 13C and 29Si solid-state NMR spectra. Batch and column experiments were conducted to investigate for metal ion removal from fuel ethanol. The results showed that the Langmuir model describes the sorption equilibrium data of the metal ions in a satisfactory way. From the Langmuir isotherms, the following maximum adsorption capacities (in mmolg -1) were determined: 1.81 for Fe(III), 1.75 for Cr(III), 1.30 for Cu(II), 1.25 for Co(II), 1.15 for Pb(II), 0.95 for Ni(II), and 0.87 for Zn(II). Thermodynamic functions, the change of free energy (ΔG), enthalpy (ΔH), and entropy (ΔS) showed that the adsorption of metal ions onto Si-Pr-DPA was feasible, spontaneous, and endothermic. The sorption-desorption of the metal ions made possible the development of a preconcentration and quantification method of metal ions in fuel ethanol. © 2012 Elsevier Inc.

Characterization, and crystal structure of thiophenyl-2-methylidene-2- aminophenol

The Schiff base thiophenyl-2-methylidene-2-aminophenol (ImineOH) is obtained from a stoichiometric mixture of 2-thiophenecarboxaldehyde and 2-aminophenol in ethanol under reflux at 90 C. Its crystal structure is determined by single crystal X-ray diffraction. ImineOH packs in an orthorhombic unit cell in the Pbca space group with the unit cell parameters a = 16.942(4) Å, b = 13.4395(11) Å, and c = 17.5857(12) Å, V = 4004.1(10) Å3, Z = 16. Strong hydrogen bonds are present in the ImineOH structure. Apart from the X-ray study, ImineOH was characterized by elemental analysis (CHN-S) and FT-IR (4000 cm-1 to 400 cm-1), UV-Vis and 13C, 1H, and 15N NMR spectroscopic measurements. © 2013 Pleiades Publishing, Ltd.

Adsorption of heavy metal ions and epoxidation catalysis using a new polyhedral oligomeric silsesquioxane

The objective of this research was the preparation of a silsesquioxane functionalized with eight chloropropyl chains (T8-PrCl) and of a new derivative functionalized with a pendant linear chain (2-amino-1,3,4-thiadiazole - ATD; T8-Pr-ATD). The two nanostructured materials were characterized by 13C and 29Si NMR, FTIR and elemental analysis. The new nanostructured material, octakis[3-(2-amino-1,3,4-thiadiazole)propyl] octasilsesquioxane (T8-Pr-ATD), was tested as a ligand for transition-metal ions with a special attention to adsorption isotherms. The adsorption was performed using a batchwise process and the organofunctionalized surface showed the ability to adsorb the metal ions Cu (II), Co (II), and Ni (II) from water and ethanol. The adsorption isotherms were fitted by Langmuir, Freundlich, Temkin and Dubinin-Radushkevich (D-R) model. The kinetics of adsorption of metals were performed using three models such as pseudo-first order, pseudo-second order and Elovich. The Langmuir and Elovich models were the most appropriate to describe the adsorption and kinetic data, respectively. Furthermore, the T8-Pr-ATD was successfully applied to the analysis of environmental samples (river and sea water). Subsequently, a new nanomaterial was prepared by functionalization of the T8-Pr-ATD with a Mo (II) organometallic complex (T8-Pr-ATD-Mo). Only a few works in the literature have reported this type of substitution, and none dealt with ATD and Mo (II) complexes. The new Mo-silsesquioxane organometallic nanomaterial was tested as precursor in the epoxidation of cyclooctene and styrene. © 2012 Elsevier B.V.