A Comparative Analysis of In-Medium Spectral Functions for N(940) and N (au)(1535) in Real-Time Thermal Field Theory

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Electrochemical kinetic study of surface layer growth on natural pyrite in acid medium

This paper presents electrochemical experiments on natural pyrite that combine potentiostatic and voltammetric techniques. X-ray microanalysis is used as an auxiliary technique. The layer growth on pyrite surface is conducted in a wide range of pH and potential range: 3.4 <= pH <= 5.9 with E = 0.80 V (versus SHE), and 0.80 V <= E <= 1.00 V with pH 4.5 (versus SHE) in acetic acid-acetate buffer. This work is unique for two reasons: (1) phenomenological model about layer growth is applied and mathematical-physic consistence is verified and (2) Meyer's hypotheses of chemical mechanism are used to explain kinetic parameters of the phenomenological model. (c) 2005 Elsevier B.V. All rights reserved.

Linkage disequilibrium levels in Bos indicus and Bos taurus cattle using medium and high density SNP chip data and different minor allele frequency distributions

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Diffusion of Lambda(c) in hot hadronic medium and its impact on Lambda(c)/D ratio

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Differential environmental impacts on small and medium size rivers from center of São Paulo State, Brazil, and regional management perspectives

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Inorganic elemental analysis and identification of residual monomers released from different glass ionomer cements in cell culture medium

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Painéis de Medium Density Fiberboard fabricados com bagaço de cana-de-açúcar e madeira de reflorestamento

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Assessment of CT numbers in limited and medium field-of-view scans taken using Accuitomo 170 and Veraviewepocs 3De cone-beam computed tomography scanners

To assess the influence of anatomic location on the relationship between computed tomography (CT) number and X-ray attenuation in limited and medium field-of-view (FOV) scans. Materials and Methods Tubes containing solutions with different concentrations of K2HPO4 were placed in the tooth sockets of a human head phantom. Cone-beam computed tomography (CBCT) scans were acquired, and CT numbers of the K2HPO4 solutions were measured. The relationship between CT number and K2HPO4 concentration was examined by linear regression analyses. Then, the variation in CT number according to anatomic location was examined. Results The relationship between K2HPO4 concentration and CT number was strongly linear. The slopes of the linear regressions for the limited FOVs were almost 2-fold lower than those for the medium FOVs. The absolute CT number differed between imaging protocols and anatomic locations. Conclusion There is a strong linear relationship between X-ray attenuation and CT number. The specific imaging protocol and anatomic location of the object strongly influence this relationship.

Chronic reparative changes in medium-sized vessels in a case of primary cutaneous anaplastic large-cell lymphoma with angioinvasive features and cytotoxic phenotype: new histopathological findings in line with indolent clinical behavior

Angioinvasion/angiodestruction has been reported in a small subset of primary cutaneous anaplastic large-cell lymphomas (PCALCL). Recently, PCALCL with angioinvasive features and cytotoxic phenotype has been characterized as a variant associated with good clinical outcomes despite worrisome histopathologic features. We report a case of PCALCL with angioinvasive features and cytotoxic phenotype associated with reparative changes on the wall of medium-sized vessels involved by the neoplasm, including intimal fibroblastic proliferation and luminal obliteration. This vascular pattern, although previously unreported in PCALCL, is in accordance with the indolent behavior observed in this entity and provides a further link with lymphomatoid papulosis type E.

Meiotic arrest of sheep oocytes using roscovitine under different medium compositions

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of sequential medium with fibroblast growth factor-10 and follicle stimulating hormone on in vitro development of goat preantral follicles

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Medium density particleboard reinforced with bamboo laminas

The objective of this work was to evaluate the effect of the addition of bamboo laminas of the species Dendrocalamus giganteus to three-layer medium density particleboard (MDP). These laminas were glued onto both the top and the bottom of each panel. With the manufactured panels laminated with bamboo, mechanical tests based on the Brazilian Standard ABNT NBR 14810 were carried out to determine the modulus of rupture (MOR) in static bending and the tensile strength parallel-to-surface. These mechanical tests were realized in particleboards of eucalyptus and in reinforced particleboard, both produced in the laboratory. The modulus of rupture and tensile strength parallel-to-surface of the laminated MDP had values close to those that have been reported. The reinforcements increased the values of these studied properties. Nevertheless, this fact indicated the possibility to produce a stronger MDP using bamboo lamina as surface layers. These results show the possibility of using coatedbamboo MDP for utilization in large spans, for example, in flooring for mezzanines with finish on both sides, and for robust furniture as bookshelves, beds, tables, etc.

How do titanium and Ti6A14V corrode in fluoridated medium as found in the oral cavity? an in vitro study

The purpose of this work was to evaluate the corrosion of commercially pure (CP) titanium and Ti6Al4V in vitro at different F- concentrations regularly found in the oral cavity by using different electrochemical tests and surface analysis techniques. electrochemical impedance spectroscopy (EIS), open circuit potential (OCP) and potentio-dynamic polarization tests were associated to advanced characterization techniques such as SEM, EDS, AFM, ICP-MS and XPS. OCP tests revealed a higher reactivity of both CP titanium and Ti6Al4V at 12,300 ppm F- concentration than that recorded at 227 ppm F-. Also, a significant decrease of the corrosion resistance of both materials was noticed by EIS in fluoride solutions. Material loss caused by corrosion was noticed on titanium surfaces by SEM and AFM in the presence of high F- concentration. CP titanium degraded by pitting corrosion while Ti6Al4V suffered from general corrosion showing micro-cracks on surface. Furthermore, a high release of metallic ions from the test samples after immersion at high F concentrations was detected by ICP-MS, that can be potentially toxic to oral tissues. (C) 2014 Elsevier B.V. All rights reserved.

Electrochemical behaviour of (N-R-4-cyanopyridinium)pentaammineruthenium(II) derivatives in acidic medium. Hydrolysis of coordinated nitriles

The electrochemical behaviour of N-R-4-cyanopyridinium (4-rcp) (R = methyl, decyl, dodecyl, or benzyl) coordinated to pentaammineruthenium(II) in CF3COOH-CF3COONa (μ = 0.1 M, pH 3) aqueous medium was studied by means of cyclic voltammetry and constant potential electrolysis. The electrochemical oxidation of the metallic centre (Ep ca 0.51 V/SCE) can be described as a reversible monoelectronic charge-transfer followed by an irreversible chemical reaction, which is the hydrolysis of N-R-4-cyanopyridiniumpentaammineruthenium(III) (A) to N-R-4-carboxamidepyridiniumruthenium (III) (B) with the kf1 values depending on the type of alkyl group. The E 1 2 values are not significantly influenced by the nature of the alkyl group. At more negative potential (ca -0.5 V/SCE), B undergoes an electrochemical reduction followed by an aquation reaction to produce aquopentaammineruthenium(II) and free N-R-4-carboxamidepyridinium. The amide was identified by comparison of its cyclic voltammogram and UV-vis spectrum with that of a sample prepared by chemical reaction. The results were also discussed by comparison with other systems, and show that nitrile-amide conversion catalysed by pentaammineruthenium(II) complexes is possible. © 1994.

Natural killer activity in a medium-term multi-organ bioassay for carcinogenesis

Natural killer (NK) cell activity was evaluated after the initiation and promotion steps in a medium-term multi-organ bioassay for carcinogenesis. NK cell activity was assessed in vitro by Cr51 release assay at the 4th and 30th weeks of the experiment. Male Wistar rats were sequentially initiated with N-diethylnitrosamine (DEN i.p.), N-butyl-N-(4-hydroxybutyl)nitrosamine (BBN drinking water), N-methyl-N-nitrosourea (MNU i.p.), dihydroxy-di-N-propylnitrosamine (DHPN drinking water) and N,N'-dimethylhydrazine (DMH s.c.) at subcarcinogenic doses for 4 weeks (DMBDD initiation). One group was evaluated at the 4th week and the other was maintained without any further treatment until the 30th week. Two initiated groups were exposed through the diet to 2-acetylaminofluorene (2-AAF) or phenobarbital (PB), from the 6th until the 30th week. Five additional groups were studied to evaluate the effects of each initiator on NK activity. All groups submitted to initiation only, initiation plus promotion, or promotion only, developed significantly more preneoplastic lesions than the untreated control group. The main target organs for tumor development in the initiated animals were the liver and the colon, irrespective of treatment with 2-AAF or PB. NK cell activity was not affected by exposure to genotoxic carcinogens after initiation, at the 4th week. Treatments only with PB or 2-AAF did not change NK cell activity. However, decreased NK cell activity was registered in the group only initiated with DMBDD and in the group given DMBDD+2-AAF. This late depression of NK cell activity at the 30th week could be related to the production of suppressing molecules by the tumor cells.