Competition of sicklepod, cassia obtusifolia l., densities on soybean, glycine max (l.) merr., at variable row distance

Competition studies with soybeans, Glycine max (L.) Merr. "Bragg." and sicklepod, Cassia obtusifolia L., were conducted at the Agricultural Research and Education Center of the University of Florida in Quincy, Florida. Two field experiments were established, one on May 22, 1975. and the other four weeks later, on June 19, 1975, to determine the competitive effects of various sicklepod densities and the influences of soybean row distances on weed dry matter, soybear plant characteristics, yield components and seed yield, and on soil nutrient content. Control, low, medium, and high sicklepod densities in the first experiment were O, 25,000, 53,000, and 77,000 p1ants/ha, respectively; while the second experiment presented control, low, medium, and high sicklepod densities of O, 36,000, 68,000, and 122,000 plants/ha, respectively. Three soybean row distance treatments were tested using a constant pattern of 90-, 60-, and 45-cm widths throughout the growing season. Three other treatments, evaluated in a variable patern, were initially seeded in 30-cm row widths. Five weeks after planting, an appropriate number of soybean rows were harvested from the 30"cm pattern to establish row distances of 90, 60, and 30-60 cm for the remainder of the season. ln the greenhouse a test was conducted to evaluate the effects af those variables on seed germination and seedling vigor for the next soybean generation. As a result of full-season sicklepod competition, soybean plants were less branched, set fewer leaves, and presented thinner stems as compared to the control. However, height of soybean plants was not affected by the presence of sicklepod. ln one of the two experiments, number of nodes decreased for soybeans under weed campetition. The yield components--number of pods; number of seeds, and seed yield per soybean plant--were all similarly reduced due to weed competition. Seeds per pod were decreased to a lesser extent. Soybean seed yields per unit area were significantly diminished by increasing levels af sicklepod ínfestation. While the control produced 3120 kg/ha, the sicklepod densities of 25,000, 53,000, and 77,000 plants/ha reduced seed yíelds 47, 65, and 73%, respectively. As soybean row distances decreased, number of branches, number of leaves, and stem diameter of soybeans decreased. However, the height of soybean plants increased with narrwing of row width. The components of seed yield--number of pods, number of seeds, and seed yield per soybean plant--diminished as row spacing was reduced. Maximum difference between row distances for these attributes was attained for soybean plants under weed-free conditions. Generally, as row width decreased, soybean seed yield per unit area increased. Specifically, soybear.s in 90-cm rows, either in constant or variable row pattern, yielded less than soybeans in 60- and 30-60-cm rows in the variable pattern. Soil contents of phosphorus, potassium, calcium, and magnesium were not affected by the various levels of sicklepod and soybean populalions. Neither the sicklepod densities nor the soybean row distances influenced seed germination and seedling vigor in the next soybean generation. Sicklepod was a strong competitor with soybeans at all density ranges investigated. Because sicklepod grows taller than soybeans during the reproductive stages of the crop, limited success can be reached by varying row spacing alone. However, this practice is considered an integral measure to complement other methods of sicklepod control. Compared to constant rows, the soybean cropping system using variable row spacings presents the choice of planting soybeans at close row spacings to provide early competition with weeds and the possibility of obtaining a forage crop after the first month of growth, without any decreases on the final seed yields.

Variable-Structure Control Design of Switched Systems With an Application to a DC-DC Power Converter

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The Variable Sample Size (X)over-bar Chart with Estimated Parameters

The VSS X chart, dedicated to the detection of small to moderate mean shifts in the process, has been investigated by several researchers under the assumption of known process parameters. In practice, the process parameters are rarely known and are usually estimated from an in-control Phase I data set. In this paper, we evaluate the (run length) performances of the VSS chart when the process parameters are estimated, we compare them in the case where the process parameters are assumed known and we propose specific optimal control chart parameters taking the number of Phase I samples into account.

Design of SPR systems with dynamic compensators and output variable structure control

This paper presents necessary and sufficient conditions for the following problem: given a linear time invariant plant G(s) = N(s)D(s)-1 = C(sI - A]-1B, with m inputs, p outputs, p > m, rank(C) = p, rank(B) = rank(CB) = m, £nd a tandem dynamic controller Gc(s) = D c(s)-1Nc(s) = Cc(sI - A c)-1Bc + Dc, with p inputs and m outputs and a constant output feedback matrix Ko ε ℝm×p such that the feedback system is Strictly Positive Real (SPR). It is shown that this problem has solution if and only if all transmission zeros of the plant have negative real parts. When there exists solution, the proposed method firstly obtains Gc(s) in order to all transmission zeros of Gc(s)G(s) present negative real parts and then Ko is found as the solution of some Linear Matrix Inequalities (LMIs). Then, taking into account this result, a new LMI based design for output Variable Structure Control (VSC) of uncertain dynamic plants is presented. The method can consider the following design specifications: matched disturbances or nonlinearities of the plant, output constraints, decay rate and matched and nonmatched plant uncertainties. © 2006 IEEE.

Variable speed refrigeration system with HPF input rectifier stage

This paper is based on the analysis and implementation of a new drive system applied to refrigeration systems, complying with the restrictions imposed by the IEC standards (Harmonic/Flicker/EMI-Electromagnetic Interference restrictions), in order to obtain high efficiency, high power factor, reduced harmonic distortion in the input current and reduced electromagnetic interference, with excellent performance in temperature control of a refrigeration prototype system (automatic control, precision and high dynamic response). The proposal is replace the single-phase motor by a three-phase motor, in the conventional refrigeration system. In this way, a proper control technique can be applied, using a closed-loop (feedback control), that will allow an accurate adjustment of the desirable temperature. The proposed refrigeration prototype uses a 0.5Hp three-phase motor and an open (Belt-Drive) Bitzer IY type compressor. The input rectifier stage's features include the reduction in the input current ripple, the reduction in the output voltage ripple, the use of low stress devices, low volume for the EMI input filter, high input power factor (PF), and low total harmonic distortion (THD) in the input current, in compliance with the IEC61000-3-2 standards. The digital controller for the output three-phase inverter stage has been developed using a conventional voltage-frequency control (scalar V/f control), and a simplified stator oriented Vector control, in order to verify the feasibility and performance of the proposed digital controls for continuous temperature control applied at the refrigerator prototype. ©2008 IEEE.

Performance of cultivars of crisp mini-lettuce with respect to ground cover and spacing, in three planting times

The planting of lettuce in greenhouses, as well as covering beds with a polyethylene sheet, is a viable technology, promoting improvements in microclimatic conditions of the environment. In view of the little information on mini-lettuce, the aim of this work was to evaluate the performance of three cultivars of crisp minilettuce ('Green Frizzly', 'Red Frizzly no. 1' and 'Red Frizzly no. 2') with and without ground cover, under different spacings (20 × 15 cm and 20 × 20 cm), in three planting times (1: November 16, 2004; 2: December 17, 2004; and 3: January 20, 2005). The study was conducted in a greenhouse at UNESP-FCAV, Jaboticabal-SP. The experiments were carried out using a randomized block design, following a 3 × 2 × 2 factorial scheme with 12 treatments and three repetitions. The characteristics evaluated were plant height (cm), head diameter (cm), fresh weight (g) and number of leaves per plant. Planting time 3 was shown to be favorable for all the characteristics analyzed. 'Red Frizzly no. 2' was found to be the most suited to planting time 1, and for planting times 2 and 3, this cultivar did not differ from 'Red Frizzly no. 1'. The factor ground cover was not found to affect the characteristics evaluated, and therefore, cultivation without ground cover is recommended. The spacing 20 × 15 cm was shown to be favorable, resulting in cultivation with the highest populations, thereby increasing productivity. Based on the results obtained and for the conditions in which the experiment was conducted, it can be concluded that: planting time 3 (January 20, 2005) was the most favorable; the cultivars 'Red Frizzly no. 2' and 'Red Frizzly no. 1' are adapted to all the planting times; and cultivation without ground cover using a spacing of 20 × 15 cm was the most suitable.

Search for supersymmetry in final states with missing transverse energy and 0, 1, 2, or ≥3 b-quark jets in 7 TeV pp collisions using the variable α T

A search for supersymmetry in final states with jets and missing transverse energy is performed in pp collisions at a centre-of-mass energy of s=7 TeV. The data sample corresponds to an integrated luminosity of 4.98 fb-1 collected by the CMS experiment at the LHC. In this search, a dimensionless kinematic variable, α T, is used as the main discriminator between events with genuine and misreconstructed missing transverse energy. The search is performed in a signal region that is binned in the scalar sum of the transverse energy of jets and the number of jets identified as originating from a bottom quark. No excess of events over the standard model expectation is found. Exclusion limits are set in the parameter space of the constrained minimal supersymmetric extension of the standard model, and also in simplified models, with a special emphasis on compressed spectra and third-generation scenarios.[Figure not available: see fulltext.] © 2013 CERN for the benefit of the CMS Collaboration.

Silicone insulators of power transmission lines with a variable inorganic load concentration: Electrical and physiochemical analyses

Polymeric insulation is an increasing tendency in projects and maintenance of electrical networks for power distribution and transmission. Electrical power devices (e. g., insulators and surge arresters) developed by using polymeric insulation presents many advantages compared to the prior power components using ceramic insulation, such as: a better performance under high pollution environment; high hydrophobicity; high resistance to mechanical, electrical and chemical stresses. The practice with silicone insulators in polluted environments has shown that the ideal performance is directly related to insulator design and polymer formulation. One of the most common misunderstandings in the design of silicone compounds for insulators is the amount of inorganic load used in their formulation. This paper attempts to clarify how the variation of the inorganic load amount affects physicochemical characteristics of different silicone compounds. The physicochemical evaluation is performed from several measurements, such as: density, hardness, elongation, tensile strength. In addition, the evaluation of the physicochemical structure is carried out using infrared test and scanning electronic microscopy (SEM). The electrical analysis is performed from the electric tracking wheel and erosion test, in agreement with the recommendation of the International Electrotechnical Commission (IEC). (C) 2014 Elsevier Ltd. All rights reserved.

Short communication: Variable number of tandem repeat polymorphisms in DGAT1 gene of buffaloes (Bubalus bubalis) is associated with milk constituents

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A familial case with interstitial 2q36 deletion: Variable phenotypic expression in full and mosaic state

Submicroscopic chromosomal anomalies play an important role in the etiology of craniofacial malformations, including midline facial defects with hypertelorism (MFDH). MFDH is a common feature combination in several conditions, of which Frontonasal Dysplasia is the most frequently encountered manifestation; in most cases the etiology remains unknown. We identified a parent to child transmission of a 6.2 Mb interstitial deletion of chromosome region 2q36.1q36.3 by array-CGH and confirmed by FISH and microsatellite analysis. The patient and her mother both presented an MFDH phenotype although the phenotype in the mother was much milder than her daughter. Inspection of haplotype segregation within the family of 2q36.1 region suggests that the deletion arose on a chromosome derived from the maternal grandfather. Evidences based on FISH, microsatellite and array-CGH analysis point to a high frequency mosaicism for presence of a deleted region 2q36 occurring in blood of the mother. The frequency of mosaicism in other tissues could not be determined. We here suggest that the milder phenotype observed in the proband's mother can be explained by the mosaic state of the deletion. This most likely arose by an early embryonic deletion in the maternal embryo resulting in both gonadal and somatic mosaicism of two cell lines, with and without the deleted chromosome. The occurrence of gonadal mosaicism increases the recurrence risk significantly and is often either underestimated or not even taken into account in genetic counseling where new mutation is suspected. (C) 2012 Elsevier Masson SAS. All rights reserved.

Chains of Infinite Order, Chains with Memory of Variable Length, and Maps of the Interval

We show how to construct a topological Markov map of the interval whose invariant probability measure is the stationary law of a given stochastic chain of infinite order. In particular we characterize the maps corresponding to stochastic chains with memory of variable length. The problem treated here is the converse of the classical construction of the Gibbs formalism for Markov expanding maps of the interval.

Visual impairment in children with spastic cerebral palsy measured by psychophysical and electrophysiological grating acuity tests

Background: This study measured grating visual acuity in 173 children between 6-48 months of age who had different types of spastic cerebral palsy (CP). Method: Behavioural acuity was measured with the Teller Acuity Cards (TAC) using a staircase psychophysical procedure. Electrophysiological visual acuity was estimated using the sweep VEP (sVEP). Results: The percentage of children outside the superior tolerance limits was 44 of 63 (69%) and 50 of 55 (91%) of tetraplegic, 36 of 56 (64%) and 42 of 53 (79%) of diplegic, 10 of 48 (21%) and 12 of 40 (30%) of hemiplegic for sVEP and TAC, respectively. For the sVEP, the greater visual acuity deficit found in the tetraplegic group was significantly different from that of the hemiplegic group (p < 0.001). In the TAC procedure the mean visual acuity deficits of the tetraplegic and diplegic groups were significantly different from that of hemiplegic group (p < 0.001). The differences between sVEP and TAC means of visual acuity difference were statistically significant for the tetraplegic (p < 0.001), diplegic (p < 0.001), and hemiplegic group (p = 0.004). Discussion: Better visual acuities were obtained in both procedures for hemiplegic children compared to diplegic or tetraplegic. Tetraplegic and diplegic children showed greater discrepancies between the TAC and sVEP results. Inter-ocular acuity difference was more frequent in sVEP measurements. Conclusions: Electrophysiologically measured visual acuity is better than behavioural visual acuity in children with CP.

Assessing biophysical variable parameters of bean crop with hyperspectral measurements

Recently high spectral resolution sensors have been developed, which allow new and more advanced applications in agriculture. Motivated by the increasing importance of hyperspectral remote sensing data, the need for research is important to define optimal wavebands to estimate biophysical parameters of crop. The use of narrow band vegetation indices (VI) derived from hyperspectral measurements acquired by a field spectrometer was evaluated to estimate bean (Phaseolus vulgaris L.) grain yield, plant height and leaf area index (LAI). Field canopy reflectance measurements were acquired at six bean growth stages over 48 plots with four water levels (179.5; 256.5; 357.5 and 406.2 mm) and tree nitrogen rates (0; 80 and 160 kg ha-1) and four replicates. The following VI was analyzed: OSNBR (optimum simple narrow-band reflectivity); NB_NDVI (narrow-band normalized difference vegetation index) and NDVI (normalized difference index). The vegetation indices investigated (OSNBR, NB_NDVI and NDVI) were efficient to estimate LAI, plant height and grain yield. During all crop development, the best correlations between biophysical variables and spectral variables were observed on V4 (the third trifoliolate leaves were unfolded in 50 % of plants) and R6 (plants developed first flowers in 50 % of plants) stages, according to the variable analyzed.