EXPERIENCE IN THE EVALUATION OF CHILDREN WITH HEPATOSPLENOMEGALY AT A TEACHING AMBULATORY, SÃO PAULO, BRAZIL

Objectives: Describe cases of children with hepatosplenomegaly (HS) attended at the General Pediatric Teaching Ambulatory (AGER) of Instituto da Criança, São Paulo, identifying the main causes, evolution, necessity for hospitalization and/or referral to specialists. Methodology: Retrospective analysis of the records of children presenting HS on admission at AGER from September 1, 1993 to August 31, 1996. Results: Of the 89 children included (age range, 1 to 148 months; median, 24 months), 64 (72%) were referred from other services for HS investigation. Most common presenting complaints were: fever - 39 (44%); pallor - 26 (29%); weight loss - 21 (24%) and jaundice - 14 (16%). Main alterations noticed on physical examination were: pallor - 47 (53%) and short stature - 17 (19%). Anemia was diagnosed in 70 children (79%); 35 children (39%) had infections; 7 (8%) metabolic disorders and 5 (6%) neoplastic disorders. The most frequent infections were of the urinary tract - 9 (10%) and hepatitis A - 6 (7%).Thirty six children (40%) were referred to specialists, 17 of which were already diagnosed. Conclusions: Most of the children with HS present deficiency anemia associated with infections which the general pediatrician is able to diagnose. Persistence of unexplained HS for more than 2 months, especially when there is substantial volume enlargement or alteration in the organs consistency, is an indication for referral to specialists.

Treatment of pemphigus vulgaris and pemphigus foliaceus: experience with 71 patients over a 20 year period

Forty one cases of pemphigus vulgaris and thirty cases of pemphigus foliaceus were investigated at Hospital Universitário Clementino Fraga Filho from 1978 to 1999. They were divided into two treatment groups: one group received up to 100 mg of oral prednisone daily and the other group received >120 mg daily. The dose up to 100 mg provided good initial control of pemphigus vulgaris and pemphigus foliaceus and did not increase the mortality rate associated to disease. The dose >120 mg induced higher morbidity. These data allowed us to establish a regimen of oral prednisone (1-2 mg/kg/daily) with maximum of 120 mg daily in the treatment of pemphigus vulgaris and pemphigus foliaceus.

Dental caries experience in Indians of the Upper Xingu, Brazil

The present study describes the experience of dental caries in Indians communities of the Xingu, in order to supply parameters for further analysis of trends of the disease in Indians. We performed oral health examination in 288 Indians from four communities (Yawalapiti, Aweti, Mehinaku and Kamaiura) living in the southern part of the Xingu National Park, using international criteria defined by the World Health Organization. The outcome measures were the DMFT and dmft scores, and the care index. Indians of the Upper Xingu presented high levels of caries, in all age groups. The average DMFT for 11 to 13-year-old children - 5.93 - was lower than the index measured in 1993 for 12-year-old schoolchildren in nearby cities - 8.23 -, whose United Nations' human development index ranked medium. However, Indians presented a much lower care index, per age group, than these cities, and a high ratio of missing teeth for persons above 20 years old. These observations indicate low incorporation of dental care services. The irregularity of the services programmed for these communities, and the changing dietary and cultural patterns, mainly derived from their contact with the non-indigenous population of Brazil, reinforce the pressing need for health promotion initiatives aimed at these groups.

An agent-based evolutionary approach for manufacturing system layout design

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do grau de Mestre em Engenharia Electrotécnica e de Computadores

Análise de Integridade Estrutural de uma Flare Industrial

Para garantir que um equipamento opere com segurança e fiabilidade durante o seu ciclo de vida, desde a sua instalação ao desmantelamento, devem ser realizadas inspeções e/ou monitorizações que, dependendo dos dados recolhidos, podem implicar avaliações Fitness- For-Service (FFS) que definirão a necessidade de reparação ou alteração do equipamento ou das condições processuais. A combinação de inspeção ou monitorização com os melhores procedimentos e técnicas de avaliação atuais fazem sobressair insuficiências dos procedimentos mais antigos. Usando métodos mais avançados de avaliação, validados e suportados através de uma vasta experiência de campo, pode-se agora avaliar defeitos nos ativos (equipamentos) e determinar a adequação ao serviço com uma análise FFS. As análises FFS tornaram-se cada vez mais aceites em toda a indústria ao longo dos últimos anos. A norma API 579 - 1/ASME FFS-1: 2007 fornece diretrizes para avaliar os tipos de danos que afetam os equipamentos processuais e a norma API RP 571: 2011 descreve os mecanismos de degradação que afetam os equipamentos nas petroquímicas e refinarias, que incluem os danos por corrosão, desalinhamentos, deformações plásticas, laminações, fissuras, entre outros. Este trabalho consiste na análise de Integridade Estrutural de uma Flare Industrial que surgiu da necessidade real de análise do equipamento no âmbito da atividade profissional do candidato. O estudo realizado a nível profissional é de grande abrangência, incluindo a inspeção do equipamento, identificação da falha ou dano, recolha e registo de dados, definição de estratégia de atuação e seleção de técnicas de avaliação da condição para posterior alteração, reparação ou desmantelamento. Na presente dissertação de mestrado em Engenharia Mecânica, Ramo Construções Mecânicas, pretende-se efetuar o estudo aprofundado de uma das etapas de projeto, nomeadamente estudar a causa, avaliar a falha e implicações estruturais ou processuais devido à degradação interior do riser de uma flare, com base numa análise FFS, assumindo a operabilidade em segurança e garantindo resolutas condições de funcionamento. A presente análise FFS tem como finalidade validar ou não a integridade atual (avaliação técnica quantitativa) de modo a conhecer se o item em questão é seguro e confiável para continuar a operar em condições específicas durante um período de tempo determinado, tendo em consideração as condições verificadas no ato de inspeção e especificações de projeto, segundo os itens de verificação de segurança estabelecidos na norma EN 1990:2002/A1:2005/AC:2010 e com base na norma API 579-1/ASME FFS-1: 2007. No âmbito do presente trabalho foram realizadas as seguintes tarefas: - Identificar e analisar os mecanismos de degradação com base na norma API RP 571: 2011, face às condições processuais e geométricas que o equipamento em análise está sujeito de modo a perceber a evolução da degradação estrutural e quais as implicações na sua longevidade. - Avaliar e propor soluções de reparação e ou alterações processuais e ou geométricas do equipamento em análise de modo a permitir a continuidade em funcionamento sem afetar as condições de segurança e por conseguinte minimizar ou evitar o elevado custo económico associado a um novo equipamento e tempo de paragem processual. - Assumir limites estruturais face às condições processuais e ações externas ou adjacentes. - Garantir a segurança e qualidade da vida humana ou meio que o rodeia, do equipamento, das instalações, das infraestruturas envolventes e evitar o colapso económico, quer por motivos processuais, quer indeminizações ou agravamento do prémio do seguro. Verificou-se que os resultados serão a base para as alterações inerentes, tais como reforço estrutural, alteração da geometria do defletor, ajuste no tensionamento dos cabos e controlo da espessura mínima, de modo a alargar o período de vida útil da flare com segurança.

Histoplasmosis in Rio Grande do Sul, Brazil: a 21-year experience

Of 156 cases of histoplasmosis observed in the State of Rio Grande do Sul (Brazil), during a 21-year period (1978-1999) 137 were included in this study. Sixty-seven per cent of the patients had hematogeneous disseminated histoplasmosis, 24% had a self-limited syndrome (acute pulmonary histoplasmosis, histoplasmoma or primary pulmonary lymph node complex), and 9 per cent had chronic pulmonary histoplasmosis. Clinical, mycological, and epidemiological data were reviewed and commented.

Proceedings of the fifth international conference on Axiomatic Design (ICAD 2009)

FCT/UNL; UNIDEMI, Caixa Geral de Depósitos, CEST, MANO, Visteon, Axiomatic Design, Pionee

Design of New Materials for Passive Vibration Control

The aim of this contribution is to extend the techniques of composite materials design to non-linear material behaviour and apply it for design of new materials for passive vibration control. As a first step a computational tool allowing determination of macroscopic optimized one-dimensional isolator behaviour was developed. Voigt, Maxwell, standard and more complex material models can be implemented. Objective function considers minimization of the initial reaction and/or displacement peak as well as minimization of the steady-state amplitude of reaction and/or displacement. The complex stiffness approach is used to formulate the governing equations in an efficient way. Material stiffness parameters are assumed as non-linear functions of the displacement. The numerical solution is performed in the complex space. The steady-state solution in the complex space is obtained by an iterative process based on the shooting method which imposes the conditions of periodicity with respect to the known value of the period. Extension of the shooting method to the complex space is presented and verified. Non-linear behaviour of material parameters is then optimized by generic probabilistic meta-algorithm, simulated annealing. Dependence of the global optimum on several combinations of leading parameters of the simulated annealing procedure, like neighbourhood definition and annealing schedule, is also studied and analyzed. Procedure is programmed in MATLAB environment.

The influence of task design on upper limb muscles fatigue during low-load repetitive work: A systematic review

Ergonomic interventions such as increased scheduled breaks or job rotation have been proposed to reduce upper limb muscle fatigue in repetitive low-load work. This review was performed to summarize and analyze the studies investigating the effect of job rotation and work-rest schemes, as well as, work pace, cycle time and duty cycle, on upper limb muscle fatigue. The effects of these work organization factors on subjective fatigue or discomfort were also analyzed. This review was based on relevant articles published in PubMed, Scopus and Web of Science. The studies included in this review were performed in humans and assessed muscle fatigue in upper limbs. 14 articles were included in the systematic review. Few studies were performed in a real work environment and the most common methods used to assess muscle fatigue were surface electromyography (EMG). No consistent results were found related to the effects of job rotation on muscle activity and subjective measurements of fatigue. Rest breaks had some positive effects, particularly in perceived discomfort. The increase in work pace reveals a higher muscular load in specific muscles. The duration of experiments and characteristics of participants appear to be the factors that most have influenced the results. Future research should be focused on the improvement of the experimental protocols and instrumentation, in order to the outcomes represent adequately the actual working conditions. Relevance to industry: Introducing more physical workload variation in low-load repetitive work is considered an effective ergonomic intervention against muscle fatigue and musculoskeletal disorders in industry. Results will be useful to identify the need of future research, which will eventually lead to the adoption of best industrial work practices according to the workers capabilities.

Design and Development of a Solar Dryer for Microalgae Retrieval - An EPS@ISEP 2013 Spring Project

Currently excessive fossil fuel consumption has become a serious problem. People are searching for new solutions of energy production and there are several options to obtain alternative sources of energy without further devastating the already destroyed environment. One of these solutions is growing microalgae, from which biodiesel can be obtained. The microalgae production is a growing business because of its many useful compounds. In order to collect these compounds microalgae must first be harvested and then dried. Nowadays the solutions used for drying use too much energy and therefore are too expensive and not sustainable. The goal of this project, one of the possible choices during the EPS@ISEP 2013 Spring, was to develop a solar microalgae dryer. The multinational team involved in its development was composed of five students, from distinct countries and fields of study, and was the responsible for designing a solar microalgae dryer prototype for the microalgae laboratory of the chemical engineering department at ISEP, suitable for future tests and incorporating control process (in order not to destroy the microalgae during the drying process). The solar microalgae dryer was built to work as a distiller that gets rid of the excess water from the microalgae suspension. This paper presents a possible solution for this problem, the steps to create the device to harvest the microalgae by drying them with the use of solar energy (also used as an energy source for the solar dryer control system), the technologies used to build the solar microalgae dryer, and the benefits it presents compared to current solutions. It also presents the device from the ethical and sustainable viewpoint. Such alternative to already existing methods is competitive as far as energy usage is concerned.

Design and Implementation of a Biologically Inspired Swimming Robot - An EPS@ISEP 2014 Spring Project

This paper presents the development of a fish-like robot called Bro-Fish. Bro-Fish aims to be an educational toy dedicated to teaching mechanics, programming and the physics of floating objects to youngsters. The underlying intention is to awaken the interest of children for technology, especially biomimetic (biologically inspired) approaches, in order to promote sustainability and raise the level of ecological awareness. The main focus of this project was to create a robot with carangiform locomotion and controllable swimming, providing the opportunity to customize parts and experiment with the physics of floating objects. Therefore, the locomotion principles of fishes and mechanisms developed in related projects were analysed. Inspired by this background knowledge, a prototype was designed and implemented. The main achievement is the new tail mechanism that propels the robot. The tail resembles the undulation motion of fish bodies and is actuated in an innovative way, triggered by an elegant movement of a rotating helicoidal. First experimental tests revealed the potential of the proposed methodology to effectively generate forward propulsion.

Os efeitos da intervenção no reconto e nas narrativas de experiência pessoal em crianças de idade pré-escolar

As competências narrativas emergem desde cedo, e vão sendo adquiridas ao longo do desenvolvimento da criança. No entanto não significa que se desenrolam do mesmo modo em todos as crianças pois crianças com dificuldades na produção narrativa poderão ter necessidade de um ensino específico e estruturado. Sendo a narrativa um aspeto importante da linguagem, é fundamental agir o mais cedo possível para prevenir futuros problemas, tanto no percurso académico como social. Tendo por base as questões em torno da produção narrativa, o presente estudo tem como objetivo compreender a influência da intervenção narrativa no reconto e nas narrativas de experiência pessoal em oito crianças do pré-escolar (5/6 anos), estando um dos participantes diagnosticado com uma condição do espetro do autismo. Ao longo do estudo, todos os participantes foram sendo avaliados pela escala Narrative Language Measures durante 10 sessões e quanto à intervenção narrativa denominada Campeões de histórias consistiu em 21 sessões com duração média de 25 minutos. Neste estudo recorremos ao delineamento experimental de linha de base múltipla, o que nos permitiu analisar o desempenho de cada participante ao longo do tempo. Os resultados revelaram que através da intervenção narrativa houve um aumento na cotação dos testes da escala em todos os participantes, inclusive na criança com condição do espetro autista, e que esses se mantiveram sempre acima dos níveis basais após um período de duas semanas sem intervenção. Deste modo, podemos concluir que a intervenção narrativa produziu efeitos relevantes quer no reconto, quer nas narrativas de experiência pessoal dos participantes e que se apresenta como uma intervenção económica, rápida e eficaz.

Optimizing potentiometric ionophore and electrode design for environmental on-site control of antibiotic drugs: Application to sulfamethoxazole

Potentiometric sensors are typically unable to carry out on-site monitoring of environmental drug contaminants because of their high limits of detection (LODs). Designing a novel ligand material for the target analyte and managing the composition of the internal reference solution have been the strategies employed here to produce for the first time a potentiometric-based direct reading method for an environmental drug contaminant. This concept has been applied to sulfamethoxazole (SMX), one of the many antibiotics used in aquaculture practices that may occur in environmental waters. The novel ligand has been produced by imprinting SMX on the surface of graphitic carbon nanostructures (CN) < 500 nm. The imprinted carbon nanostructures (ICN) were dispersed in plasticizer and entrapped in a PVC matrix that included (or not) a small amount of a lipophilic additive. The membrane composition was optimized on solid-contact electrodes, allowing near-Nernstian responses down to 5.2 μg/mL and detecting 1.6 μg/mL. The membranes offered good selectivity against most of the ionic compounds in environmental water. The best membrane cocktail was applied on the smaller end of a 1000 μL micropipette tip made of polypropylene. The tip was then filled with inner reference solution containing SMX and chlorate (as interfering compound). The corresponding concentrations were studied for 1 × 10−5 to 1 × 10−10 and 1 × 10−3 to 1 × 10−8 mol/L. The best condition allowed the detection of 5.92 ng/L (or 2.3 × 10−8 mol/L) SMX for a sub-Nernstian slope of −40.3 mV/decade from 5.0 × 10−8 to 2.4 × 10−5 mol/L.

Cryptococcosis: a review of the brazilian experience for the disease

Cryptococcosis is a systemic mycosis caused by Cryptococcus neoformans. The disease occurs in patients with cellular immunodeficiency. The incidence of cryptococcosis arises with aids, and mycosis is one of the opportunistic infections that defines AIDS. After the HAART era the occurrence of cryptococcosis decreased all over the world, but it still continues to be a prevalent disease in Brazil. Thus, we consider this paper to be very important as a result of our reviewing of Brazilian literature regarding some relevant aspects of that disease.

Multi-Objective and Financial Portfolio Optimization of Carrier-Sense Multiple Access Protocols with Cooperative Diversity

8th International Workshop on Multiple Access Communications (MACOM2015), Helsinki, Finland.