980 resultados para estabilidade estrutural e fratura
Resumo:
In horses less than one year of age fractures of the third metacarpal bone (McIII) or metatarsal bone III (MtIII) are mainly attributed to trauma. Open reduction and internal fixation are the most common treatment method. A Quarter Horse filly with three months of age, which weighed 150kg presented a diaphyseal multifragmentar wedge fracture of right MtIII which was treated with transcortical pins and cast, associated with intralesional application of platelet rich plasma (PRP). After two years of surgery, the animal initiated a training program for racing, and six months later, the patient ran its first official match. The choice of therapeutic methods for treating fractures in horses should be one that provides an earlier repair and minor possibility of complications. Thus, the therapy association which was adopted was considered favorable, since allowed full reestablishment of locomotion of the patient and made possible its return to race.
Resumo:
A trial was carried out with the purpose of evaluating the effect of different management systems applied between the rows of rubber trees (Hevea brasiliensis) on the aggregate stability in water of Dark Red Latosol, with clayey texture from the Municipality of Jaboticabal (SP) and Yellow Red Podzolic, sandy/medium texture fromthe Municipality of Tabapua (SP). The treatments consisted of disk harrowing, Pueraria phaseoloides and mowing. The soil samples were withdrawn after seven years of application of these management systems from depths of 0-0.1, 0.1-0.2, 0.2-0.3, and 0.3-0.4 m. The stability of the aggregates was obtained in sieves with size classes of 8-4, 4-2, 2-1, 1-0.5, 0.5-0.125, and < 0.125 mm. The Pueraria phaseoloides gave a significant difference regarding the distribution of the aggregates on the superficial layer (10 cm) when compared to the other management systems, presenting a higher distribution of larger sized aggregates on the Dark Red Latosol. The tillage management for this same depth presented higher values of small sized aggregates on both soils. The organic matter on the soils showed a direct and significant relation to the stability of the larger sized aggregates and an inverse relation with the stability of the smaller sized aggregates.
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
This study was accomplished in existing Cerrado's relicts at State Park Guartelá, Tibagi, PR (24°39'10S and 50°15'25W), which represent one of the last extreme-meridional remanescents of this type of formation. Fifty plots with dimensions of 5x5m were allocated for phyto-sociological analysis, including in the sample individuals with height ≥ 1 m, divided into two samples to evaluate the following strata: a) upper-plants with DAS ≥ 3 cm, and b) intermediate - plants with DAS <3cm. Moreover, in each plot, there were established sub-plots with dimensions of 1x1m for sampling the lower stratum, comprised by individuals with height <1m and >10cm. The complete survey found 1340 individuals distributed in 28 families, 66 genera and 115 species. The diversity index was higher for the mean component (H'=3.30), followed by the superior component (H'=3.09) and the inferior (H'=2.91). The frequent occurrence of bushes is a remarkable characteristic of the physiognomy of the areas inside the park and 82 % of the populations studied are distributed in aggregated standard. Because it is a marginal region of occurrence of cerrado vegetation, now under the influence of a subtropical climate, more humid and cold, compared to the core area of this biome, it is noted that these areas are characterized by a decrease in stature, richness and diversity of its flora. Nevertheless, they preserve typical species of the Brazilian Savannah; but, due to their distribution in relicts and been, in part, devastated, some are included in the red list of endangered plants in Parana state, which evidences the importance of conservation and management of these areas.
Resumo:
Although ceramics present high compressive strength, they are brittle materials due to their low tensile strength so they have lower capacity to absorb shocks. This study evaluated the fracture toughness of different ceramic systems, which refers to the ability of a friable material to absorb defformation energy. Three ceramic systems were investigated. Ten cylindrical samples (5,0mm x 3,0mm), were obtained from each ceramic material as follows: G1- 10 samples of Vitadur Alpha (Vita-Zahnfabrik); G2- 10 samples of IPS Empress2 (Ivoclar-Vivadent); G3- 10 samples of In-Ceram Alumina (Vita-Zahnfabrik). Fracture toughness values were collected upon indentation tests that were performed under a heavy load. A microhardness tester (Digital Microhardness Tester FM) utilized a 500gf load cell during 10seconds to perform four impressions on each sample. Statistically significant results were observed (ANOVA and Kruskal-Wallis tests). In-Ceram Alumina presented the highest median toughness values (2,96N/m3/2), followed by Vitadur Alpha (2,08N/m3/2) and IPS Empress2 (1,05N/m3/2). It may be concluded that different ceramic systems present distinct fracture toughness values, thus In-Ceram is capable of absorbing superior stress when compared to Vitadur Alpha and IPS Empress2.
Resumo:
The sol-gel process is a method for obtaining vitreous or vitro-ceramic materials which, are prepared a sol and by drying the liquid phase. This technique has been used extensively for the preparation of glassy gels, films, fibers and particles from the hydrolysis and polycondensation reactions of metal alkoxides. The usual methods for drying are: evaporation drying (xerogels), freeze drying (criogéis) and via supercritical CO2 extraction (aerogels). In the present work, we studied the preparation of silica gels by the sol-gel process from the hydrolysis of alkoxides tetraethylorthosilicate (TEOS) and 3-glycidoxypropyltrimethoxysilane (GPTS). The hydrolysis was promoted from GPTS and TEOS in proportion (4: 1) under acidic conditions. The hydrolysis reaction was promoted inside a Becker at room temperature. After hydrolyses the prepared sol had pH 2, and kept under mechanical agitation for a period of 1 hour. In order to accelerate the polycondensation reaction, the pH was corrected to a value near 5 by slowly adding NH4OH. Then the sols were leaked in sealed polycarbonate containers and maintained for 20 days at 40°C for gelation. Silica aerogels were prepared via supercritical CO2 extraction of the wet gel at temperature and pressure higher than 31°C and 74 atm, in an autoclave specially developed for the process. The structural characteristics were studied in the dry gel (aerogel). Aerogels were then characterized by nitrogen adsorption and small angle light scattering. The nitrogen adsorption data were analyzed for the determination of the BET specific surface (SBET), the total pore volume Vp, the pore mean size (lP=4Vp/SBET), the particle mean size (lS) and the pore size distribution (PSD). And the data from small angle light scattering were analyzed to determine the correlation function (γ'), the area per unit volume (S/V), average pore size (l ) and the average particle size...
Resumo:
Pós-graduação em Matemática Universitária - IGCE
Resumo:
This research evaluated the surgical stabilily in patients with mandibular prognathism and retrognathism in which was used sagital split technic to correct those detormities. Twelve patients were selected from the clinic of only one experienced surgeon. Six patients presenter a Class III 6 a Class II molar relationship. A comparative cefalometric analysis using linear and angular measurements was performed of pre-surgery, imediate pós-surgery and 1 year follow-up. The following conclusions were obtained. 1 The Dal Pont sagital split technic modified by Epker to correct mandibular prognathisn and retroghnatism is a stable technic and must be indicated to correct those deformities. 2 Small relapses are easily corrected by the post-surgical orthodontic treatment. 3 A small over correction is advised in cases of large mandibular advancements or set bascks. 4 In those cases which a large amount of mandibular retrusion on advancement need to be performed, a combination of maxillary and mandibular surgery should be used. Rigid fixation technic is also indicated in those cases
Resumo:
Using the sol-gel process, organic-inorganic hybrid coatings were synthesized by incorporation of different concentrations of functionalized carbon nanotubes, to improve their mechanical strength and thermal resistance without changing its passivation character. The siloxane-PMMA hybrids were prepared by radical polymerization of methyl methacrylate (MMA) with 3-methacryloxipropiltrimethoxisilane (MPTS) using the thermal initiator benzoyl peroxide (BPO), followed by acid catalyzed hydrolysis and condensation of tetraethoxysilane (TEOS). The analysis of pristine and functionalized carbon nanotubes was carried out using Scanning Electron Microscopy, X-ray Photoelectron Spectroscopy and Raman Spectroscopy. Structural analysis of hybrids was performed by Nuclear Magnetic Resonance, Atomic Force Microscopy and Raman Spectroscopy. For analysis of mechanical strength and thermal stability were performed mechanical compression tests and thermogravimetric analysis, respectively. Electrochemical Impedance Spectroscopy was used to evaluate the corrosion resistance in saline environment. The results showed an effective functionalization of carbon nanotubes with carboxyl groups and conservation of its structure. The hybrids showed high siloxane network connectivity and roughness of approximately 0.3 nm. The incorporation of carbon nanotubes in the hybrid matrix did not change significantly their thermal stability. Samples containing carbon nanotubes exhibit good corrosion resistance (on the order of MΩ in saline environment), but the lack of complete dispersion of carbon nanotubes in the hybrid, resulted in a loss of mechanical and corrosion resistance compared to hybrid matrix.
Resumo:
Pós-graduação em Economia - FCLAR
Resumo:
Pós-graduação em Engenharia Mecânica - FEG
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
The zygomatic-maxillary complex due to its projection framed as one of the areas hardest hit by injuries, as well as the nasal bones. Component important in this context, the zygomatic arch fracture is under the direct action of forces due to its structure fragile, resulting in loss of normal convex curvature. Therefore, it is aimed to report a clinical case of male patient, who had leucoderma zygomatic bone fracture using access transcutaneous and intra-oral fracture reduction body of zygoma and zygomatic arch. In addition to evidence combination of closed and open techniques for solving the case. The technique provided the patient excellent cosmetic and functional results.
Resumo:
Introduction: The zygomatic maxillary complex is the second most affected area of the face due to injuries, surpassed only by the nasal bones. The zygomatic arch fracture is under the direct action of trauma (punch, head butt), its fragile structure, losing its normal convex curvature in the temporal area. Objective: To report a case, using a reduction technique of zygomatic arch fracture using a hook or Ginestet Barros. Case report: A male patient, 25 years of age, leukoderma, showing zygomatic arch fracture right. The patient underwent closed reduction with the hook adapted to the skin. The patient was instructed to keep care of the region for at least four weeks
Resumo:
The frontal sinus fractures are derived from accidents of great intensity. Are usually associated with fractures of the midface, including the naso-orbital fractures and zygomatic ethmoid. Several treatment modalities have been proposed. In this case it was used to access bicoronal reconstruction of the anterior frontal sinus, and restore contour fronto-naso-orbital-ethmoid with satisfactory results.