Biology and distribution of grouper (Epinephelus coioides) in province waters (Abadan Bhrakan)

This survay has been done from Januray 2000 till May 2002 in Khouzestan costal waters. Four species of grouper were identified from which orange spotted grouper (Epinephelus coioides) was the dominant species. For studing environmental parameters and reproductive biology, age, growth parameters and mortality rate samples were collected by fishing ship. Samples were taken montly in 4 days by fishing traps and trawls. In addition, some samples were obtained from Khozestan fish landing centres. Environmental factors such as PH, 02, salinity, water temperature and depth of traping areas, were measured. To identify species, morphometric characteries of 452 individal fishes were measured. Stomach contents of 394 fish were has survaid, from which stomach of 226 fish, and 168 fish had empty stomachs. Percentage of empty stomachs (cv) in males was more than females. Food items found in 73 percent of stomach were crab (11%), shrimps (8.8%) , squids (3.9%), gastropods (17%) and bivalves (0.4%). Feeding intensity in year classes did not obay logic trends The importance relatively indicator (I.R.I) were 81, 9.9, 4, 1.5 and 0.3 percent for fish, crab, shrimp, squid, gastropod and bivalve respectively. For age determination, sagita otoliths of 450 fish were taken and countable sections were obtained from 425 specimens. Relative frequency distribution of opaque and transparent rings showed that each opaque growth ring generates once a year from November to September. It seemed that generation of opaque rings is affected by temperature and photoperiod changes. Correlation between length and age was calculated using Von Bertalanffy's least square method. Following equasion was obtaind: L(t) : 122.27 (1 e 0.146 (t+0.482)) Growth parameters were determined through by Ford Walford equasion and Response Surface and Shepherd subcommands in Elefan program and L00 and K amounts were have determined. Correlation between length and age of 635 fish was determined by gender . Length and age correlation was calculated by exponential model and between total length and standard length by straghit line model. Correlation between age and weight of sagita was calculated by total length and age. The most Correlation was between sagita weight and fish age (r=0.876). Total mortality rate (z) was estimated by Length Converthed Method , Jones and Vanzaling and Powel Wetherall. Total mortality rate was z=0.39. Natural mortality rate, using Pauly method was calculated M=0.32. Fishing mortality (F) was 0.08. Gonads of 425 fishes were surveid within 18 month, from which 363 were female, 46 were male and 16 were sex reversing individuals .Total length of females varied from 26 to 95.5 centimeters while males length varied from 56.5 to 107 centimeters. Sex reversing individuals had a length of 47.5 centimeters, when two years old and 62.5 centimeters at age of 3 years. From the mentioned 425 fish, 401 individuals were matured, containing 339 females and 62 males, 5.47 females against each male. Montly changes of Gonadosomatic Index (GSI) by total body weight and standard length and total body length showed that this index increases from march to May and maximum increase was in May . This experiment was adapted in spawning season. Potential, relative, and absoulate fecundity was estimated by counting eggs in three samples. Total amount of traped fish using special traps was 16182.18 kg from which Epinephelus coioides provided catching 15353.43 kg of it (91.27 %) and By catch was 141.18 kg (8.24 %). Total average CPUE for whole catch was 123.33 kg/day/vessel. Total amount of catch was estimated 232.04 tons, considering CPUE of total catch and total Khuzestan trap ships effort.

La reproducción de la merluza en el Mar Argentino (Merlucciidae, Meluccius merluccius hubbsi) : 1. Descripción histológica del ciclo del ovario de merluza

The present paper deals on the histological description of the hake ovary made on the basis of gonad observations of 394 females during the period April 1966 March 1967. The material was obtained from weekly sampling of commercial catches carried out at the Institute of Marine Biology (Prov. Buenos Aires, Argentina). The anatomical and histological description of the standard ovary and the adopted terminology are given. The maturation process is divided into five periods, from ovocyte formation to yolked ovocyte formation, with its histological description. Ovary changes are analyzed on detail. The following conclusions were outlined: 1. Analysis demonstrated that although some specimens were totally spawned others, at the end of the spawning period, retaining a great number of ovocytes in different maturity stages. Therefore, postspawners have been classified as follows: Postspawned II : This stages is characterized by the empty ovarian structure, with ovocytes in stage II, which will remain in the resting phase untill next spawning season. Postspawned III and IV: Their main characteristics are: tissue destruction, bloody residuals and remaining ovocytes in stage III and IV, respectively. 2. Some transformations were found in ovaries of postspawned III and IV. They are classified as follows, according to its origin and structure: Developed from follicular cell membrane – a) Glandular formations, b) Epiteloid formations - Originated from remaining ovocytes, c) Ovocyte disintegration, d) Ovocyte with follicular cell infiltration. 3. All those structures derived from postpawners III and IV have a temporary character and will be reabsorbed. Their presence delay the recuperation of the organ and its reproductive functions. Consequently, the possibility of those structures acting as control mechanisms is suggested. 4. Transformations pointed out in paragraph Nº 2 prevent the possibility of consecutive spawning originated from the remaining ovocytes (II and IV). 5. No structures originated from postspawners III and IV were found during summer season. 6. Reproductive cycle of hake has been described monthly. It was observed that maturing ovaries predominate in summer (November-December).

Re-conceptualising value in the engineering design process: The value cycle map

Introducing a "Cheaper, Faster, Better" product in today's highly competitive market is a challenging target. Therefore, for organizations to improve their performance in this area, they need to adopt methods such as process modelling, risk mitigation and lean principles. Recently, several industries and researchers focused efforts on transferring the value orientation concept to other phases of the Product Life Cycle (PLC) such as Product Development (PD), after its evident success in manufacturing. In PD, value maximization, which is the main objective of lean theory, has been of particular interest as an improvement concept that can enhance process flow logistics and support decision-making. This paper presents an ongoing study of the current understanding of value thinking in PD (VPD) with a focus on value dimensions and implementation benefits. The purpose of this study is to consider the current state of knowledge regarding value thinking in PD, and to propose a definition of value and a framework for analyzing value delivery. The framework-named the Value Cycle Map (VCM)- intends to facilitate understanding of value and its delivery mechanism in the context of the PLC. We suggest the VCM could be used as a foundation for future research in value modelling and measurement in PD.

Product intelligence: Theory and practice

Are there any benefits in allowing orders and products to be able to manage their own progress through a supply chain? The notion of associating (and even embedding) information management and reasoning capabilities with a physical product has been discussed for over ten years now. This talk will review the notions of product intelligence and examine the rationales for these models and the practicality of their implementation. Both theoretical and practical issues associated with product intelligence will be examined referencing a number of trial deployments in manufacturing, logistics and aerospace equipment servicing. © 2012 IFAC.

Travel behaviour applied in freight transportation using intelligent products

The route planning problem for an order in freight transportation involves the selection of the best route for its transportation given a set of options that the network can offer. In its adaptive (or dynamic) version, the problem deals with the planning of a new route for an order while it is actually in transit typically because part or all of its pre-selected route is blocked or disrupted. In the intelligent product approach we are proposing, an order would be capable of identifying and evaluating such new routes in an automated manner and choosing the most preferable one without the intervention of humans. Because such approaches seek to mirror (and then automate) human decision making, in this paper we seek to identify new ways for dynamic route planning in industrial logistics inspired by the way people make similar decisions about their journey when they travel in multi-modal networks. We propose a new simulation game as a methodological tool for capturing their travel behaviour and we use it in this study. The results show that a simulation game can be used for capturing strategies and tactics of travellers and that intelligent products can provide a proper platform for the usage of such strategies in freight logistics. © 2012 IEEE.

Embodied energy and gas emission of geotechnical infrastructure

Construction of geotechnical structures produces various environmental impacts. These include depletion of limited natural resources, generation of wastes and harmful substances during material productions and construction, ineffective usage of energy during processing of raw materials into construction materials, and emissions of unwanted gasses during transportation of materials and usage of equipments. With increasing interests in sustainability at the global scale, there is a need to develop a methodology that can assess environmental impacts at such scale for geotechnical construction. Using embodied energy and gas emission, quantitative measures of environmental impact are evaluated using a case study of a new high speed railway line construction in the UK. Based on the results, the keys to energy savings are (a) to optimise the usage of materials with high embodied energy intensity value (b) to optimise the transportation network and logistics for processes using primarily low embodied energy intensity materials and (c) to reuse as much materials on-site as possible to minimise the quantity of spoils or distance to disposal sites. The evaluated embodied energy and embodied carbon values are compared to those of other types of structures and of other activities and carbon tax values. Such comparisons can be used to discuss among various interested parties (clients, contractors, consultants, policy makers, etc) to make the construction industry more energy efficient. © Springer Science+Business Media B.V. 2011.

Nature of the electronic band gap in lanthanide oxides

Accurate electronic structures of the technologically important lanthanide/rare-earth sesquioxides (Ln2O3, with Ln=La, ⋯,Lu) and CeO2 have been calculated using hybrid density functionals HSE03, HSE06, and screened exchange (sX-LDA). We find that these density functional methods describe the strongly correlated Ln f electrons as well as the recent G0W0@LDA+U results, generally yielding the correct band gaps and trends across the Ln period. For HSE, the band gap between O 2p states and lanthanide 5d states is nearly independent of the lanthanide, while the minimum gap varies as filled or empty Ln 4f states come into this gap. sX-LDA predicts the unoccupied 4f levels at higher energies, which leads to a better agreement with experiments for Sm2O 3, Eu2O3, and Yb2O3. © 2013 American Physical Society.

Strategies to reduce the carbon footprint of consumer goods by influencing stakeholders

Consumer goods contribute to anthropogenic climate change across their product life cycles through carbon emissions arising from raw materials extraction, processing, logistics, retail and storage, through to consumer use and disposal. How can consumer goods manufacturers make stepwise reductions in their product life cycle carbon emissions by engaging with, and influencing their main stakeholders? A semi-structured interview approach was used: to identify strategies and actions, stakeholders in the consumer goods industry (suppliers, manufacturers, retailers and NGOs) were interviewed about carbon emissions reduction projects. Based on this, a summarising presentation was made, which was shared during a second round of interviews to validate and refine the results. The results demonstrate several opportunities that have not yet been exploited by companies. These include editing product choice in stores to remove products with higher carbon footprints, using marketing competences for environmental benefits, and bundling competences to create winewinewin business models. Governments and NGOs have important enabling roles to accelerate industry change. Although this work was initially developed to explore how companies can reduce life cycle carbon emissions of their products, these strategies and actions also give insights on how companies can influence and anticipate stakeholder actions in general. © 2012 Elsevier Ltd. All rights reserved.

A method for analysing operational complexity in supply chains

This paper proposes a method for analysing the operational complexity in supply chains by using an entropic measure based on information theory. The proposed approach estimates the operational complexity at each stage of the supply chain and analyses the changes between stages. In this paper a stage is identified by the exchange of data and/or material. Through analysis the method identifies the stages where the operational complexity is both generated and propagated (exported, imported, generated or absorbed). Central to the method is the identification of a reference point within the supply chain. This is where the operational complexity is at a local minimum along the data transfer stages. Such a point can be thought of as a 'sink' for turbulence generated in the supply chain. Where it exists, it has the merit of stabilising the supply chain by attenuating uncertainty. However, the location of the reference point is also a matter of choice. If the preferred location is other than the current one, this is a trigger for management action. The analysis can help decide appropriate remedial action. More generally, the approach can assist logistics management by highlighting problem areas. An industrial application is presented to demonstrate the applicability of the method. © 2013 Operational Research Society Ltd. All rights reserved.

Product intelligence in warehouse management: A case study

The need for more flexible, adaptable and customer-oriented warehouse operations has been increasingly identified as an important issue by today's warehouse companies due to the rapidly changing preferences of the customers that use their services. Motivated by manufacturing and other logistics operations, in this paper we argue on the potential application of product intelligence in warehouse operations as an approach that can help warehouse companies address these issues. We discuss the opportunities of such an approach using a real example of a third-party-logistics warehouse company and we present the benefits it can bring in their warehouse management systems. © 2013 Springer-Verlag.

Shrinkage of Gobiocypris rarus, Procypris rabaudi, and Sinilabeo rendahli preserved in formalin

Length measurements of preserved fishes are necessary in many types of fish surveys because logistics often do not allow for fish measurement immediately after catch. If the fixative causes significant shrinkage, then the preserved lengths cannot be directly used to indicate accurate live lengths. The objective of this study was to determine how preservation in formalin affects standard length of Gobiocypris rarus larvae (24-day-old and newly hatched), larval Procypris rabaudi (4-day-old), and larval Sinilabeo rendahli (12-day-old). Fishes were measured (to nearest 0.01 mm) and individually fixed in the appropriate formalin solution (2.5% or 5.0% formalin), then re-measured at 0.5, 1, 3, 7, 14, 30, 45 and 75 days after preservation to follow the time course of shrinkage. Most of the shrinkage occurred within the first half day after preservation. The 5.0% formalin caused a higher relative shrinkage rate than did the 2.5% solution; however, the difference was not statistically significant. In G. rarus, initial shrinkage of newly hatched larvae was higher than that of 24-day-old larvae.

Electron microscopic examination of the viromatrix of Rana grylio virus in a fish cell line

Rana grylio virus (RGV), a Ranavirus belonging to the family Iridoviridae, assembles in the viromatrix which is a factory for viral genome replication and particle assembly. Ultrastructural studies of the viromatrix will clarify the pathway of assembly. The viromatrix and quantitative changes in RGV infected epithelipma papulosum cyprini (EPC) cells, one of fish cell lines, were studied by electron microscopy. It was shown that viromatrices were adjacent to the nucleus, and the electron density was lower than that of the surrounding cytoplasm. The viromatrix contained virus particles with different forms, electron-dense materials and amorphous structures which included tubules and membranous materials. Tubules were often observed in direct continuity with empty capsids. Several bundles of intermediate filaments were seen alongside the viromatrix and crystalline aggregates. Large clusters of mitochondria occurred in proximity to viromatrix. A total of 990 cells profiles were examined. The results showed that 394 cells contained viromatrix: 89.3% contained one, and 10.7% contained two to four viromatrices. The number of viromatrices increased gradually and reached a peak at 16 h p.i. The viromatrix area at 24 h p.i. increased up to 7.4 +/- 0.69 mu m(2) which was three-times lower than that at 6 h p.i. The number of empty capsids within viromatrix was generally more than that of "full" particles at different time points, and there was a strong positive correlation between them. (c) 2005 Elsevier B.V. All rights reserved.

Seasonal patterns in feeding ecology of three small fishes in the Biandantang Lake, China

Feeding ecology of three small fish species, Hypseleotris swinhonis, Ctenogobius giurinus and Pseudorasbora parva was studied seasonally in the Biandantang Lake, a small, shallow lake in central China. Gut length, adjusted for total body length, was significantly higher in spring than in other seasons for all the three species. Seasonal changes in gut length were not associated with changes in food quality. Weight of fore-gut contents, adjusted for body weight, was significantly higher in winter and spring than in summer and autumn in H. swinhonis and C. giurinus, and significantly higher in autumn than in spring and summer for P. parva. Percentage of empty fore-guts was highest in summer and lowest in spring for I-I. swinhonis and C. giurinus, and highest in winter and lowest in autumn for P. parva. Diet of the three small fishes showed apparent seasonal changes, and these changes reflected partly the seasonal fluctuations of food resources in environment. Diet breadth was high in winter and low in autumn for H. swinhonis, high in winter and low in spring and summer for C. giurinus, and high in autumn and low in spring for P. parva. Diet overlaps between pairs of species were biologically significant in most cases, except between H. swinhonis and P. parva in summer and autumn and between C. giurinus and P. parva in autumn. (C) 2000 The Fisheries Society of the British Isles.