International asymmetries and the design of the International Financial System

Includes bibliography

Extração e exportação de nutrientes em cultivares de feijoeiro, sob níveis de adubação: I - Macronutrientes

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Properties of individual YBCO layers in a two-layered design for energy-efficient digital data cables

We are developing two-layered Yttrium Barium Copper Oxide (YBCO) thin film structures for energy efficient data links for superconducting electronics and present the results of their property measurements. High temperature superconductors (HTS) are advantageous for the implementation of energy-efficient cables interconnecting low temperature superconductor-based circuits and other cryogenic electronics circuits at higher temperature stages. The advantages of the HTS cables come from their low loss and low dispersion properties, allowing ballistic transfer of low power signals with very high bandwidth, low heat conduction and negligible inter-line crosstalk. The microstrip line cable geometry for typical materials is a two-layered film, in which the two superconducting layers are separated by an insulation layer with a minimized permittivity. We have made a proof of concept design of two YBCO films grown by pulsed laser deposition and then assembled into a sandwich with uniform insulating interlayer of tens of micrometers thick. We report on results obtained from such systems assembled in different ways. Structural and electromagnetic properties have been examined on individual films and on the corresponding sandwich composite. © 2013 IEEE.

Design de nanodispositivos eletroluminescentes baseados no ALQ3

Neste trabalho reportamos a investigação teórica da solvatação dos isômeros do tris- (8-idroxiquinolinolato) de alumínio III – Alq3, as propriedades eletroluminescentes na solvatação de Alq3 em líquidos orgânicos como metanol, etanol, dimetilformamida (DMF) e acetonitrila, a fim de se entender a dependência na variação de ambientes do sistema, aperfeiçoando o funcionamento de filmes transportadores em dispositivos eletroluminescentes do tipo OLED (Organic Light-Emitting Diodes) e por fim investigamos o mecanismo do transporte eletrônico no Alq3 aplicando uma baixa corrente elétrica na molécula e evidenciando as curvas corrente-voltagem característica do dispositivo. A simulação consiste na aplicação do método sequencial Monte Carlo / Mecânica quântica (S-MC/MQ), que parte de um tratamento inicial estocástico para separação das estruturas mais prováveis de menor energia e posteriormente com um tratamento quântico para plotar os espectros eletrônicos das camadas de solvatação separadas através do método ZINDOS/S. Nas propriedades elétricas do transporte utilizamos o método da função de Green de não equilíbrio acoplado a teoria do funcional densidade (DFT) inferindo que as ramificações mais externas correspondentes aos anéis no Alq3 seriam terminais para o translado eletrônico. Nossos resultados mostraram que a média dos espectros de absorção para solvatação do Alq3 em soluções sofre um desvio mínimo com a mudança de ambiente, estando em ótimo acordo com os resultados experimentais da literatura; e as curvas I-V confirmaram o comportamento diodo do dispositivo, corroborando com os sentidos mais pertinentes quanto aos terminais no Alq3 para se ter um transporte eletrônico satisfatório.

Influence of pitfall trap size and design on herpetofauna and small mammal studies in a Neotropical Forest

One of the most commonly used sampling techniques to capture leaf litter amphibians, lizards and small mammals is a set of pitfall traps with drift fences. However, there are still many speculations concerning the effectiveness of different designs of pitfall traps and the most adequate size of each trap. To address this problem, we conducted the first standardized comparison of patterns of species richness, rank-abundance, and community structure of leaf litter amphibians, lizards and small mammals for two trap designs (I and Y format) and three bucket sizes (35, 62, and 100 L) in a Neotropical forest. Results are very similar for the herpetofauna, regardless of the pitfall trap design or size used, while for small mammals values of species richness were higher for 100 L pitfall traps, as compared to the smaller traps. Therefore, the use of 100 L pitfall traps is recommended to sample the terrestrial vertebrate fauna, in multidisciplinary studies. For surveys aiming only the herpetofauna the use of smaller (35 L) traps is acceptable, taking into consideration the cost-benefits obtained by the smaller traps, in comparison to the larger ones.

A influência da integração multissensorial na construção do espaço semântico no sistema Kansei de engenharia: um estudo de Design Ergonômico com barbeadores descartáveis

Pós-graduação em Design - FAAC

Supplementation based on protein or energy ingredients to beef cattle consuming low-quality cool-season forages: I. Forage disappearance parameters in rumen-fistulated steers and physiological responses in pregnant heifers

Two experiments evaluated the influence of supplement composition on ruminal forage disappearance, performance, and physiological responses of Angus x Hereford cattle consuming a low-quality cool-season forage (8.7% CP and 57% TDN). In Exp. 1, 6 rumen-fistulated steers housed in individual pens were assigned to an incomplete 3 x 2 Latin square design containing 2 periods of 11 d each and the following treatments: 1) supplementation with soybean meal (PROT), 2) supplementation with a mixture of cracked corn, soybean meal, and urea (68:22:10 ratio, DM basis; ENER), or 3) no supplementation (CON). Steers were offered meadow foxtail (Alopecurus pratensis L.) hay for ad libitum consumption. Treatments were provided daily at 0.50 and 0.54% of shrunk BW/steer for PROT and ENER, respectively, to ensure that PROT and ENER intakes were isocaloric and isonitrogenous. No treatment effects were detected on rumen disappearance parameters of forage DM (P >= 0.33) and NDF (P >= 0.66). In Exp. 2, 35 pregnant heifers were ranked by initial BW on d -7 of the study, allocated into 12 feedlot pens (4 pens/treatment), and assigned to the same treatments and forage intake regimen as in Exp. 1 for 19 d. Treatments were fed once daily at 1.77 and 1.92 kg of DM/heifer for PROT and ENER, respectively, to achieve the same treatment intake as percent of initial BW used in Exp. 1 (0.50 and 0.54% for PROT and ENER, respectively). No treatment effects (P = 0.17) were detected on forage DMI. Total DMI was greater (P < 0.01) for PROT and ENER compared with CON and similar between PROT and ENER (P = 0.36). Accordingly, ADG was greater (P = 0.01) for PROT compared with CON, tended to be greater for ENER compared with CON (P = 0.08), and was similar between ENER and PROT (P = 0.28). Heifers receiving PROT and ENER had greater mean concentrations of plasma glucose (P = 0.03), insulin (P <= 0.09), IGF-I (P <= 0.04), and progesterone (P = 0.01) compared to CON, whereas ENER and PROT had similar concentrations of these variables (P >= 0.15). A treatment x hour interaction was detected (P < 0.01) for plasma urea N (PUN), given that PUN concentrations increased after supplementation for ENER and PROT (time effect, P < 0.01) but did not change for CON (time effect, P = 0.62). In conclusion, beef cattle consuming low-quality cool-season forages had similar ruminal forage disappearance and intake, performance, and physiological status if offered supplements based on soybean meal or corn at 0.5% of BW.

Estudo de fase clínica I utilizando membrana de quitosana dopada com hormônios derivados de plaquetas

Pós-graduação em Pesquisa e Desenvolvimento (Biotecnologia Médica) - FMB

Uso fertilizante do subproduto da agroindústria processadora de goiabas I: atributos químicos do solo

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Indicators of the risk mechanics for Class-I and Class-II amalgam and composite resin restorations

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Contribuição das redes de T.I. para formulação da estratégia e gestão das empresas

Pós-graduação em Engenharia de Produção - FEB

Optimized design of substrate-integrated hollow waveguides for mid-infrared gas analyzers

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Cogeneration design problem Computational complexity analysis and solution through an expert system

Purpose - The purpose of this paper is twofold: to analyze the computational complexity of the cogeneration design problem; to present an expert system to solve the proposed problem, comparing such an approach with the traditional searching methods available.Design/methodology/approach - The complexity of the cogeneration problem is analyzed through the transformation of the well-known knapsack problem. Both problems are formulated as decision problems and it is proven that the cogeneration problem is np-complete. Thus, several searching approaches, such as population heuristics and dynamic programming, could be used to solve the problem. Alternatively, a knowledge-based approach is proposed by presenting an expert system and its knowledge representation scheme.Findings - The expert system is executed considering two case-studies. First, a cogeneration plant should meet power, steam, chilled water and hot water demands. The expert system presented two different solutions based on high complexity thermodynamic cycles. In the second case-study the plant should meet just power and steam demands. The system presents three different solutions, and one of them was never considered before by our consultant expert.Originality/value - The expert system approach is not a "blind" method, i.e. it generates solutions based on actual engineering knowledge instead of the searching strategies from traditional methods. It means that the system is able to explain its choices, making available the design rationale for each solution. This is the main advantage of the expert system approach over the traditional search methods. On the other hand, the expert system quite likely does not provide an actual optimal solution. All it can provide is one or more acceptable solutions.

Photoelectron multipliers based on avalanche pn - i - pn structures

We present a new physical principle to design an optoelectronic device, which consists of a multilayered semiconductor structure, where the necessary conditions for generation of photoelectrons are met, such that it will enable sequential avalanche multiplication of electrons and holes inside two depletion slabs created around the p - n junctions of a reverse biased pn - i - pn structure. The mathematical model and computer simulations of this Semiconductor Photo-electron Multiplier (SPEM) for different semiconductor materials are presented. Its performance is evaluated and compared with that of conventional devices. The Geiger operational mode is briefly discussed which may be used in Silicon Photomultiplier (SiPM) as an elementary photo detector to enhance its performance.

Expressão gênica de células do cumulus e oócitos bovinos sbmetidos à maturação un vitro com diferentes macromoléculas, EGF e Butirolactina I

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)