988 resultados para ddc:670
Resumo:
Most manufactured foods contain chemicals added as a deliberate part of the manufacturing process. The aims of the present study were to evaluate the mutagenicity and antimutagenicity of annatto, a natural pigment extracted from the Bixa orellana L. and widely used as a colorant in foods. The micronucleus test was performed in bone marrow cells from Swiss male mice treated with one of the three concentrations of annatto (1330, 5330 and 10,670 ppm), incorporated into the diet. The animals were fed with the diets for 7 days and sacrificed 24 h after the last treatment. For the evaluation of the antimutagenic potential of annatto, at day 7, the animals received an intraperitoneal injection of cyclophosphamide (50 mg/kg body weight). Under the concentrations tested annatto did not present mutagenic or antimutagenic activities on the mice bone marrow cells. However, an increased frequency of micronucleated cells was observed when the highest concentration (10,670 ppm) was administered simultaneously with cyclophosphamide. In conclusion, the data indicate that annatto colour, for the conditions used, is neither mutagenic nor an inhibitor of induced mutations, although it should be used carefully since high doses may increase the effect of a mutagen. © 2003 Elsevier Science Ltd. All rights reserved.
Resumo:
Tissue repair is an integration of dynamic interactive processes that involves soluble mediators, blood components, production of extra-cellular matrix and mesenchymal cells. Many studies involving the use of LLLT shows that the healing process is favored by such therapy. The aim of this work was to evaluate, through histological analysis, the tissue effects of cutaneous wounds submitted to different intensities and a same irradiation dose with lasers in λ670 or λ685nm. Eighteen animals were divided in two experimental groups according to wavelength used (λ670 or λ685nm). Each one of these groups was divided still in three subgroups of three animals each, related to the intensity of applied irradiation (2, 15 or 25mW). Twelve animals acted as untreated controls and were not irradiated. The irradiation was carried out during seven days. The animals were sacrificed eight days after surgery. The specimens were removed, kept in 4% formaldehyde for 24 hours, routinely prepared to wax, stained with H&E and analyzed under light microscopy. The histological characteristics observed, so much in the irradiated animals, as in the control, they are indicative of a substitution repair process, however, the LLLT modulatory positive effect was observed, in the healing process, mainly associate to the use of the shorter wavelength and low power. The results of the present study indicate that LLLT improves cutaneous wound repair and best results are achieved when higher potencies associated to short wavelengths or lower potencies associated to higher wavelengths are used.
Resumo:
Objective: The objective of the present investigation was to assess the histological effects of different wavelengths and intensities on the healing process of cutaneous wounds. Background Data: Tissue repair is a dynamic interactive process which involves mediators, cells and extra-cellular matrix. Several reports on the use of laser therapy have shown that the healing process is positively affected when the correct parameters are used. Methods: Eighteen standardized wounds were surgically created on the dorsum of male and female Wistar rats, which were subsequently divided into two experimental groups according to wavelength used λ.670 or λ685 nm) for lasertherapy (LLLT). Each group was divided into three subgroups of three animals according to the intensity of the applied irradiation (2,15, or 25 mW). Twelve animals were used as entreated controls and were not irradiated. The irradiation was carried out during seven consecutive days. The animals were sacrificed eight days after surgery. The specimens were removed, kept in 4% formaldehyde for 24 h, routinely prepared to wax, stained with H&E, and analyzed under light microscopy. Results: For both groups, light microscopy showed a substitution repair process; however, when LLLT was used, a positive biomodulatory effect was detectable, chiefly associated with shorter wavelength and low intensity. Conclusions: The results of the present study indicate that LLLT improved cutaneous wound repair and that the effect is a result of an inversely proportional relationship between wavelength and intensity, with treatment more effective when combining higher intensity with short wavelength or lower intensity with higher wavelength.
Resumo:
The structure of the spermatheca was investigated in specimens of five termite families with the aid of light microscopy. In longitudinal section, the spermatheca of Zootermopsis nevadensis (Termopsidae) showed the shape of an umbrella with a secretory portion and duct. The other termite species, which belong to the families Kalotermitidae, Serritermitidae, Rhinotermitidae and Termitidae showed a spermatheca constituted only by the secretory portion. This structure was an elongate, fingerlike tube with a recurved and blind extremity. The spermatheca wall was composed of a single epithelium formed by class 3 secretory cells with a lumen lined by cuticle. The cuticle was thin and smooth or thick with digitiform projections in the species examined. All the termite females showed bundles of musculature outside of the spermatheca.
Resumo:
The paper addresses the issue of apportioning of the cost of transmission losses to generators and demands in a multimarket framework. Line flows are unbundled using equivalent bilateral exchanges on a DC-network model and allocated to generators and demands. Losses are then calculated based on unbundled flows and straightforwardly apportioned to generators and demands. The proposed technique is particularly useful in a multimarket framework, where all markets have a common grid operator with complete knowledge of all network data, as is the case of the Brazilian electric-energy system. The methodology proposed is illustrated using the IEEE Reliability Test System and compared numerically with an alternative technique. Appropriate conclusions are drawn. © The Institution of Engineering and Technology 2006.
Resumo:
The aim of this study was to evaluate the influence of different light-curing units on the tensile bond strength and microhardness of a composite resin (Filtek Z250 - 3M/ESPE). Conventional halogen (Curing Light 2500 - 3M/ESPE; CL) and two blue light emitting diode curing units (Ultraled - Dabi/Atlante; UL; Ultrablue IS - DMC; UB3 and UB6) were selected for this study. Different light intensities (670, 130, 300, and 600 mW/cm2, respectively) and different curing times (20s, 40s and 60s) were evaluated. Knoop microhardness test was performed in the area corresponding to the fractured region of the specimen. A total of 12 groups (n=10) were established and the specimens were prepared using a stainless steel mold composed by two similar parts that contained a cone-shaped hole with two diameters (8.0 mm and 5.0 mm) and thickness of 1.0 mm. Next, the specimens were loaded in tensile strength until fracture in a universal testing machine at a crosshead speed of 0.5 mm/min and a 50 kg load cell. For the microhardness test, the same matrix was used to fabricate the specimens (12 groups; n=5). Microhardness was determined on the surfaces that were not exposed to the light source, using a Shimadzu HMV-2 Microhardness Tester at a static load of 50 g for 30 seconds. Data were analyzed statistically by two-way ANOVA and Tukey's test (p<0.05). Regarding the individual performance of the light-curing units, there was similarity in tensile strength with 20-s and 40-s exposure times and higher tensile strength when a 60-s light-activation time was used. Regarding microhardness, the halogen lamp had higher results when compared to the LED units. For all light-curing units, the variation of light-exposure time did not affect composite microhardness. However, lower irradiances needed longer light-activation times to produce similar effect as that obtained with high-irradiance light-curing sources.
Resumo:
Marantaceae leaves have a contrasting color pattern and a decorative design which are interesting traits for its use as cut foliage. No postharvest research has been carried out on the potential as cut foliage for species of Ctenanthe, a member of the Marantaceae. Grey-maranta (Ctenathe setosa) is an herbaceous ornamental plant native of Brazil whose cut foliage has potential to be used as new crop product for local and international ornamental markets. The objective of this study was to evaluate pulse treatments to extend the longevity of foliage. The experiment was conducted in a complete randomized design with three replications and eight treatments: distilled water; pulsing cut petioles-ends in citric acid (pH = 2.8/1h); 2% sucrose (4h); 1% sucrose plus 200 mg L-1 citric acid (4h); 0.01% Tween® 20 (4h); 100 mg L -1 benzyladenine plus 0.01% Tween® 20 (4h); 100 mg L-1 gibberellic acid plus 0.01% Tween® 20 (4h); and maintenance of cut petiole in holding solution with commercial sodium hypochlorite (0.5 mL L-1). The senescence symptoms were mainly characterized by leaf rolling and by a decrease in the angle formed between leaf and petiole as a response to water deficit stress. Gibberellic acid or benzyladenine pulse treatments significantly extended longevity (6 days compared to control) and maintained leaves' green coloration and brightness for a longer time compared to control. However, only the benzyladenine plus Tween® 20 pulse maintained leaves in an erect form for a longer time, showing a significantly higher angle between leaf and petiole compared to control. Also, foliage pulsed with benzyladenine plus Tween® 20 showed a significant smallest loss of accumulated fresh mass percentage compared to control by the T test as to parallelism of treatments lines.
Resumo:
The curimbata constitutes species of fish of wide distribution in the Neotropical area and high economic value. This work focused to evaluate processing yield and the chemical composition of the fillet in the male and female migratories and residents stocks of Prochilodus lineatus. The using the plotting was completely randomized by 4x2 factorial scheme, having as factors four stocks (one resident and three migratories) and two genders (male and female) with thirty replicates, considering each fish as an experimental unit. Each individual was submitted to the manual filleted and determination of the corporal composition (texts of moisture, crude protein, lipids, ashes and energy). They following parameters of yield had been evaluated (%): visceral entire fish (RPIE %); yield of boneless fillet (RFILE %) and processing yield of fillet with bone (RFILEC %). There was a significant difference (p<0.05) between the stocks and the studied samples. The biggest yield of boneless fillet were observed for the fish of the migrator stock I (45.77%). Males and females of the migrator stock I presented biggest fillet yield (46.79% and 43.93%, respectively), while the migrator III presented smaller yield (37.29% for males and 38.44% for females). The migratories stocks I, II and III presented values significantly smaller (p<0.05) of lipids level (0.98%; 2.01% and 1.97%, respectively) and an increase in the content of corporal protein in relation to the resident stock. It concluded that the male weighing 591g on average, belonging of the stock migrator I (captured in December), presented better thread yield and the stocks migratories are fish that has low fat tenor and high protein tenor.
Resumo:
A microcontrolled instrument for measuring the energy fluence rate (or intensity) of X-ray pulses in the orthovoltage range of 120 to 300 kV is described. The prototype instrument consists of a pyroelectric sensor, a low-noise highsensitivity current-to-voltage converter, a microcontroller and a digital display. The response of the instrument is nonlinear with the intensity of the radiation. The precision is better than 3%. The equipment is inexpensive, rugged, simple to construct and has good long-term stability. © 2009 Springer-Verlag.
Resumo:
This paper presents a review on the geotectonic framework of the Southeastern Brazil and neighborhoods, and its importance in the regional geologic evolution, which was exposed as a main conference at the XI Symposium of Southeast Geology (São Pedro, SP, 2009). Although the geologic history dates back to the Archean, and Paleo to Mesoproterozoic processes related to the evolution of the Columbia and Rodinia supercontinents occurred, it was in the Neoproterozoic that the most important structural features developed due to collisional tectonics. The collisions began in the Brasiliano I (900-700 Ma), but mainly developed during the Brasiliano II (670-530 Ma) and ended in the Brasiliano III (580-490 Ma), resulting the orogenic systems of Mantiqueira and Tocantins. The final consolidation resulted in Gondwana, around 460 My in the part which correspond to the South America Platform. The structural features represent an important heritage that controlled much the Phanerozic geologic and tectonic processes: the formation of the Paraná Basin in the Ordovician-Jurassic, the South Atlantian reactivation (active magmatism and Paraná LIP, rifting, morphogenesis and the Atlantic opening), and the Neogene-Quaternary intraplate discrete neotectonism.
Resumo:
The aim of the present work was to study the morphological characteristics of the hair coat, coat thickness (E), hair length (C), number of hair by unit area (N), hair angle to skin (A) and hair diameter (D) of Saanen and Oberhasli goats, measured under the conditions of tropical environment. The observed averages of these traits were: E= 6.04±0.08 mm; C= 33.17±0.24 mm; N= 191.50±4.67 hairs.cm-2; A= the 10.67±0.15 degrees; D= 0.203±0.0013 mm.
Resumo:
This study aimed to investigate the profile of the occurrence of abuse against children and adolescents. We analyzed the data recorded in police reports from the Department of Women's Defense, Araçatuba-SP, in 2008, relating to assault, victim-offender relationship, sociodemographic characteristics of offenders and victims, and victims' demand for health services. Among the accusations, there was a higher prevalence of physical abuse, being the residence the place of higher incidence of aggression. In most cases, the aggressor was the mother of the child, being the subject of aggression not reported, in most cases. Thus, we can define the profile of violent incidents against children, contributing to the visualization, knowledge and to deal with the problem.
Resumo:
Nova Alta Paulista region, with strong aptitude for agribusiness, is one of the poorest in the state of São Paulo. However, the development of agribusiness productive chains in the region is very heterogeneous. The study aimed at analyzing how the historical background and organizational arrangements in family farming have contributed to regional development by promoting improvements in social welfare at Nova Alta Paulista region. To this end, we analyzed the case of the Associação Agrícola de Junqueirópolis - AAJ, an organization that has been successful in the search for alternative of agricultural production. Integrated to local and global market, this organization has ensured the maintenance of many farmers and generated positive externalities for the entire region. Thus, this case shows the organizational arrangement based on cooperation can be an alternative for family farmers achieve higher levels of welfare and development.
Resumo:
Changing the sample's temperature from 200 K to 535 K, we observed 670-fold enhancement of a phonon-assisted upconversion emission at ≈754 nm obtained from a Nd3+-doped tellurite glass excited by 5 ns laser pulses at 805 nm. A rate-equation model, including the relevant energy levels and temperature dependent transition rates, is proposed to describe the process. The results fit well with the data when one considers the nonradiative transitions contributing for the 754 nm luminescence are promoted by an effective phonon mode with energy of 700 cm-1. © 2013 American Institute of Physics.