Proceedings of the Second International Atomic Energy Agency Specialists' Meeting on Subcritical Crack Growth, held at Sendai, Japan, May 15-17, 1985 /

"MEA-2090."

Nearctic pine tip moths of the genus Rhyacionia, biosystematic review : Lepidoptera--Tortricidae, Olethreutinae /

Bibliography: p. 32-33.

Microanalysis of epitaxially grown diamond tip array

Electron backscattering diffraction has been applied on polycrystalline diamond films grown using microwave plasma assisted chemical vapour deposition on silicon substrate, in order to provide a map of the individual diamond grains, grain boundary, and the crystal orientation of discrete crystallites. The nucleation rate and orientation are strongly affected by using a voltage bias on the substrate to influence and enhance the nucleation process, the bias enhanced nucleation process. In this work, the diamond surface is mapped using electron backscattering diffraction, then a layer of a few microns is ion milled away exposing a lower layer for analysis and so on. This then permits a three dimensions reconstruction of the film texture.

Crack detection in welded mechanical structures using coupled vibrations

Detection of a fatigue crack in a welded frame structure is studied in this paper using coupled response measurements. Similarity to real engineering structures is maintained in the fabrication of the test frame with hollow section chords and branch members. The fatigue crack was created by a special reciprocating mechanism that generates cyclic stress on a beam member of the structure. The methodology of coupled response measurements is first demonstrated on a single hollow section beam by analytical simulation and experimental validation. The issues of using this approach for fatigue crack detection in real structures are then examined. Finally, the experimental results of the frame under different scenarioes are presented. The existence of the crack is clearly observable from the FRF plots. It is suggested that this approach offers the potential to detect cracks in welded frame structures and is a useful tool for routine maintenance work and health assessment.

Observation of crack initiation during hot tearing

While the general mechanisms of hot tearing are understood, i.e. the inability of liquid to feed imposed strain on the mushy material, work continues on improving the understanding of the mechanisms at play. A hot tear test rig that measures the temperature and load imposed on the mushy zone during solidification has been successfully used to study hot tearing. The mould has now been modified to incorporate a window above the hot spot region to allow observation of hot tear formation and growth. Combining information from visual observation with load and temperature data has led to a better understanding of the mechanism of hot tearing. Tests were carried out on an Al-0.5 wt-% Cu alloy. It was found that load development began at about 90% solid and a hot tear formed a short time later, at between 93% and 96% solid. Hot tearing started at a very low load.

Crack depths in desiccating plastic concrete

The depths of cracks in desiccating plastic concrete are estimated by considering the effects of the suction (negative pore pressure) associated with desiccation and applying five failure models derived from fracture, theories combined with theories drawn from geotechnical engineering under the assumption that plastic concrete is a frictional particulate material. The estimated crack depths vary with the depth of desiccation, the suction profile, and a small number of material parameters that depend on the model adopted and are comparatively easy to estimate accurately. Four of the models predict excessively large crack depths. The fifth, however, predicts shallower crack depths that increase with the age of the concrete and are consistent with those of analogous desiccation cracks in coal mine tailings. It thus offers a relatively robust method of estimating the depth of desiccation cracks. Confirmation of this with data for plastic concrete is clearly desirable but not possible at present.

BEM-ESTAR SUBJETIVO E AUTOEFICÁCIA EM DEPENDENTES DE COCAÍNA/CRACK

Este estudo teve por objetivo identificar e descrever associações entre bem-estar subjetivo, construto formado por satisfação geral com a vida e afetos positivos e negativos,e autoeficáciapara abstinência de drogas em dependentes de cocaína/crack em processo de abstinência. Utilizou, para avaliar as variáveis, as Escalas de Afetos Positivos e Negativos, de Satisfação Geral com a Vida, de Autoeficácia para Abstinência de Drogas, de Avaliação para Mudança da Universidade de Rhode Island e um questionário de dados sócio-demográficos e socioculturais. Participaram 70 homens, dependentes de cocaína/crack, jovens e de baixa escolaridade.Eram pessoas de rendimentos de até três salários mínimos (63%), que foram internadas mais de uma vez (65%), autodeclaradas abstinentes no momento da coleta dos dados. Os participantes possuíam níveis médiosde autoeficácia para abstinência de drogas, níveis baixos de bem-estar subjetivo, e estavam satisfeitos com suas vidas. Cálculos de correlação de Pearson revelaram que não há associação entre bem-estar subjetivoe autoeficácia para abstinência de drogas, entre prontidão para mudança no consumo de drogas e bem-estar subjetivo, nem entre prontidão para mudança no consumo de drogas eautoeficácia para abstinência de drogas. Resultados de análise de variância revelaram que não houve diferençasnos níveis de bem-estar subjetivo entreos diferentes os agrupamentos de prontidão para mudanças nem entre as médias de autoeficácia para abstinência de drogas entre os diferentes agrupamentos de prontidão para mudanças no consumo de drogas. A discussão abordou os resultados diante do fato de a internação dos participantes ter sido involuntária ou voluntária, do tempo de internação, do seu estágio de prontidão para mudar seu comportamento de consumo de drogas e das características de seu grupo de abstinência diante da literatura da área. Finalmente, apontou, em conclusão, limitações e agenda de pesquisa futura.

Pole tip recession in linear tape systems

The tribology of linear tape storage system including Linear Tape Open (LTO) and Travan5 was investigated by combining X-ray Photoelectron Spectroscopy (XPS), Auger Electron Spectroscopy (AES), Optical Microscopy and Atomic Force Microscopy (AFM) technologies. The purpose of this study was to understand the tribology mechanism of linear tape systems then projected recording densities may be achieved in future systems. Water vapour pressure or Normalized Water Content (NWC) rather than the Relative Humidity (RH) values (as are used almost universally in this field) determined the extent of PTR and stain (if produced) in linear heads. Approximately linear dependencies were found for saturated PTR increasing with normalized water content increasing over the range studied using the same tape. Fe Stain (if produced) preferentially formed on the head surfaces at the lower water contents. The stain formation mechanism had been identified. Adhesive bond formation is a chemical process that is governed by temperature. Thus the higher the contact pressure, the higher the contact temperature in the interface of head and tape, was produced higher the probability of adhesive bond formation and the greater the amount of transferred material (stain). Water molecules at the interface saturate the surface bonds and makes adhesive junctions less likely. Tape polymeric binder formulation also has a significant role in stain formation, with the latest generation binders producing less transfer of material. This is almost certainly due to higher cohesive bonds within the body of the magnetic layer. TiC in the two-phase ceramic tape-bearing surface (AlTiC) was found to oxidise to form TiO2.The oxidation rate of TiC increased with water content increasing. The oxide was less dense than the underlying carbide; hence the interface between TiO2 oxide and TiC was stressed. Removals of the oxide phase results in the formation of three-body abrasive particles that were swept across the tape head, and gave rise to three-body abrasive wear, particularly in the pole regions. Hence, PTR and subsequent which signal loss and error growth. The lower contact pressure of the LTO system comparing with the Travan5 system ensures that fewer and smaller three-body abrasive particles were swept across the poles and insulator regions. Hence, lower contact pressure, as well as reducing stain in the same time significantly reduces PTR in the LTO system.

Does radial growth of the lichen Parmelia conspersa depend exclusively on growth processes at the lobe tip?

The objective of this study was to test the hypothesis that the radial growth of lobes of the lichen Parmelia conspersa depends largely on growth processes which occur at the lobe tip. First, individual lobes were removed from thalli and portions of the lobe removed to within various distances from the tip. Radial growth of the lobe was unaffected until less than 2 mm of the lobe tip remained. Second, the surfaces of individual lobes were painted with acrylic paint leaving different portions of the lobe exposed. Painting lobes to within 0.5 mm and 1 mm of the tip substantially reduced radial growth. Third, the levels of ribitol, arabitol and mannitol were measured in different regions behind the lobe tip on four occasions during 1994. The concentration of the three carbohydrates was greatest at the lobe tip and the levels declined linearly with distance from the tip. Fourth, painting one vertical half of the lobe tip did not affect radial growth but artificially bisecting the lobe tip with a scalpel reduced radial growth. Although transport of carbohydrate from other regions of the lobe cannot be ruled out, the results support the hypothesis that radial growth in P. conspersa depends largely on processes within a region approximately 2 mm behind the lobe tip.