Intraclonal heterogeneity and distinct molecular mechanisms characterize the development of t(4;14) and t(11;14) myeloma.

We have used whole exome sequencing to compare a group of presentation t(4;14) with t(11;14) cases of myeloma to define the mutational landscape. Each case was characterized by a median of 24.5 exonic nonsynonymous single-nucleotide variations, and there was a consistently higher number of mutations in the t(4;14) group, but this number did not reach statistical significance. We show that the transition and transversion rates in the 2 subgroups are similar, suggesting that there was no specific mechanism leading to mutation differentiating the 2 groups. Only 3% of mutations were seen in both groups, and recurrently mutated genes include NRAS, KRAS, BRAF, and DIS3 as well as DNAH5, a member of the axonemal dynein family. The pattern of mutation in each group was distinct, with the t(4;14) group being characterized by deregulation of chromatin organization, actin filament, and microfilament movement. Recurrent RAS pathway mutations identified subclonal heterogeneity at a mutational level in both groups, with mutations being present as either dominant or minor subclones. The presence of subclonal diversity was confirmed at a single-cell level using other tumor-acquired mutations. These results are consistent with a distinct molecular pathogenesis underlying each subgroup and have important impacts on targeted treatment strategies. The Medical Research Council Myeloma IX trial is registered under ISRCTN68454111.

Synchrony on embryonic development of marine turtles: individual variability and environmental effects

[EN] For sea turtles, to hatch and emerge from the nest communally is essential to decrease hatchling mortality. Thus, it is very important within a nest the simultaneous fertilization and the synchronized embryonic development of all eggs. On loggerhead nesting beaches of Cape Verde we have studied the individual variability on developmental synchrony of embryos and the influence on this process of some biological, environmental and management factors. We have compared this trait within and between 34 nests naturally incubated on the beach and 34 nests relocated to a beach hatchery during the 2009 and 2010 nesting seasons.

Synchrony on embryonic development of marine turtles: individual variability and environmental effects

[EN] For sea turtles, to hatch and emerge from the nest communally is essential to decrease hatchling mortality. Thus, it is very important within a nest the simultaneous fertilization and the synchronized embryonic development of all eggs. On loggerhead nesting beaches of Cape Verde we have studied the individual variability on developmental synchrony of embryos and the influence on this process of some biological, environmental and management factors. We have compared this trait within and between 34 nests naturally incubated on the beach and 34 nests relocated to a beach hatchery during the 2009 and 2010 nesting seasons.

The Influence of Estrogens on the Biological and Therapeutic Actions of Growth Hormone in the Liver

[EN]GH is main regulator of body growth and composition, somatic development, intermediate metabolism and gender-dependent dimorphism in mammals. The liver is a direct target of estrogens because it expresses estrogen receptors which are connected with development, lipid metabolism and insulin sensitivity, hepatic carcinogenesis, protection from drug-induced toxicity and fertility. In addition, estrogens can modulate GH actions in liver by acting centrally, regulating pituitary GH secretion, and, peripherally, by modulating GHR-JAK2-STAT5 signalling pathway

Development and characterization of Poly(L-lactic acid) (PLLA) platforms for bone tissue engineering

The development of scaffolds based on biomaterials is a promising strategy for Tissue Engineering and cellular regeneration. This work focuses on Bone Tissue Engineering, the aim is to develop electrically tailored biomaterials with different crystalline and electric features, and study their impacts onto cell biological behavior, so as to predict the materials output in the enhancement of bone tissue regeneration. It is accepted that bone exhibits piezoelectricity, a property that has been proved to be involved in bone growth/repair mechanism regulation. In addition electrical stimulations have been proved to influence bone growth and repair. Piezoelectric materials are therefore widely investigated for a potential use in bone tissue engineering. The main goal is the development of novel strategies to produce and employ piezoelectric biomaterials, with detailed knowledge of mechanisms involved in cell-material interaction. In the current work, poly (L-lactic) acid (PLLA), a synthetic semi-crystalline polymer, exhibiting biodegradibility, biocompatibility and piezoelectricity is studied and proposed as a promoter of enhanced tissue regeneration. PLLA has already been approved for implantation in human body by the Food and Drug Administration (FDA), and at the moment it is being used in several clinical strategies. The present study consists of first preparing films with different degrees of crystallinity and characterizing these PLLA films, in terms of surface and structural properties, and subsequently assessing the behavior of cells in terms of viability, proliferation, morphology and mineralization for each PLLA configuration. PLLA films were prepared using the solvent cast technique and submitted to different thermal treatments in order to obtain different degrees of crystallinity. Those platforms were then electrically poled, positively and negatively, by corona discharge in order to tailor their electrical properties. The cellular assays were conducted by using two different osteoblast cell lines grown directly onto the PLLA films:Human osteoblast Hob, a primary cell culture and Human osteosarcoma MG-63 cell line. This thesis gives also a comprehensive introduction to the area of Bone Tissue Engineering and provides a review of the work done in this field in the past until today, in that same field, including the one related with bone’s piezoelectricity. Then the experimental part deals with the effects of the crystallinity degrees and of the polarization in terms of surface properties and cellular bio assays. Three different degrees of crystallinity, and three different polarization conditions were prepared; which results in 9 different configurations under investigation.

Development of ultra-high-performance concrete (UHPC) using waste glass materials ─ towards innovative eco-friendly concrete

Le béton conventionnel (BC) a de nombreux problèmes tels que la corrosion de l’acier d'armature et les faibles résistances des constructions en béton. Par conséquent, la plupart des structures fabriquées avec du BC exigent une maintenance fréquent. Le béton fibré à ultra-hautes performances (BFUP) peut être conçu pour éliminer certaines des faiblesses caractéristiques du BC. Le BFUP est défini à travers le monde comme un béton ayant des propriétés mécaniques, de ductilité et de durabilité supérieures. Le BFUP classique comprend entre 800 kg/m³ et 1000 kg/m³ de ciment, de 25 à 35% massique (%m) de fumée de silice (FS), de 0 à 40%m de poudre de quartz (PQ) et 110-140%m de sable de quartz (SQ) (les pourcentages massiques sont basés sur la masse totale en ciment des mélanges). Le BFUP contient des fibres d'acier pour améliorer sa ductilité et sa résistance aux efforts de traction. Les quantités importantes de ciment utilisées pour produire un BFUP affectent non seulement les coûts de production et la consommation de ressources naturelles comme le calcaire, l'argile, le charbon et l'énergie électrique, mais affectent également négativement les dommages sur l'environnement en raison de la production substantielle de gaz à effet de serre dont le gas carbonique (CO[indice inférieur 2]). Par ailleurs, la distribution granulométrique du ciment présente des vides microscopiques qui peuvent être remplis avec des matières plus fines telles que la FS. Par contre, une grande quantité de FS est nécessaire pour combler ces vides uniquement avec de la FS (25 à 30%m du ciment) ce qui engendre des coûts élevés puisqu’il s’agit d’une ressource limitée. Aussi, la FS diminue de manière significative l’ouvrabilité des BFUP en raison de sa surface spécifique Blaine élevée. L’utilisation du PQ et du SQ est également coûteuse et consomme des ressources naturelles importantes. D’ailleurs, les PQ et SQ sont considérés comme des obstacles pour l’utilisation des BFUP à grande échelle dans le marché du béton, car ils ne parviennent pas à satisfaire les exigences environnementales. D’ailleurs, un rapport d'Environnement Canada stipule que le quartz provoque des dommages environnementaux immédiats et à long terme en raison de son effet biologique. Le BFUP est généralement vendu sur le marché comme un produit préemballé, ce qui limite les modifications de conception par l'utilisateur. Il est normalement transporté sur de longues distances, contrairement aux composantes des BC. Ceci contribue également à la génération de gaz à effet de serre et conduit à un coût plus élevé du produit final. Par conséquent, il existe le besoin de développer d’autres matériaux disponibles localement ayant des fonctions similaires pour remplacer partiellement ou totalement la fumée de silice, le sable de quartz ou la poudre de quartz, et donc de réduire la teneur en ciment dans BFUP, tout en ayant des propriétés comparables ou meilleures. De grandes quantités de déchets verre ne peuvent pas être recyclées en raison de leur fragilité, de leur couleur, ou des coûts élevés de recyclage. La plupart des déchets de verre vont dans les sites d'enfouissement, ce qui est indésirable puisqu’il s’agit d’un matériau non biodégradable et donc moins respectueux de l'environnement. Au cours des dernières années, des études ont été réalisées afin d’utiliser des déchets de verre comme ajout cimentaire alternatif (ACA) ou comme granulats ultrafins dans le béton, en fonction de la distribution granulométrique et de la composition chimique de ceux-ci. Cette thèse présente un nouveau type de béton écologique à base de déchets de verre à ultra-hautes performances (BEVUP) développé à l'Université de Sherbrooke. Les bétons ont été conçus à l’aide de déchets verre de particules de tailles variées et de l’optimisation granulaire de la des matrices granulaires et cimentaires. Les BEVUP peuvent être conçus avec une quantité réduite de ciment (400 à 800 kg/m³), de FS (50 à 220 kg/m³), de PQ (0 à 400 kg/m³), et de SQ (0-1200 kg/m³), tout en intégrant divers produits de déchets de verre: du sable de verre (SV) (0-1200 kg/m³) ayant un diamètre moyen (d[indice inférieur 50]) de 275 µm, une grande quantité de poudre de verre (PV) (200-700 kg/m³) ayant un d50 de 11 µm, une teneur modérée de poudre de verre fine (PVF) (50-200 kg/m³) avec d[indice inférieur] 50 de 3,8 µm. Le BEVUP contient également des fibres d'acier (pour augmenter la résistance à la traction et améliorer la ductilité), du superplastifiants (10-60 kg/m³) ainsi qu’un rapport eau-liant (E/L) aussi bas que celui de BFUP. Le remplacement du ciment et des particules de FS avec des particules de verre non-absorbantes et lisse améliore la rhéologie des BEVUP. De plus, l’utilisation de la PVF en remplacement de la FS réduit la surface spécifique totale nette d’un mélange de FS et de PVF. Puisque la surface spécifique nette des particules diminue, la quantité d’eau nécessaire pour lubrifier les surfaces des particules est moindre, ce qui permet d’obtenir un affaissement supérieur pour un même E/L. Aussi, l'utilisation de déchets de verre dans le béton abaisse la chaleur cumulative d'hydratation, ce qui contribue à minimiser le retrait de fissuration potentiel. En fonction de la composition des BEVUP et de la température de cure, ce type de béton peut atteindre des résistances à la compression allant de 130 à 230 MPa, des résistances à la flexion supérieures à 20 MPa, des résistances à la traction supérieure à 10 MPa et un module d'élasticité supérieur à 40 GPa. Les performances mécaniques de BEVUP sont améliorées grâce à la réactivité du verre amorphe, à l'optimisation granulométrique et la densification des mélanges. Les produits de déchets de verre dans les BEVUP ont un comportement pouzzolanique et réagissent avec la portlandite générée par l'hydratation du ciment. Cependant, ceci n’est pas le cas avec le sable de quartz ni la poudre de quartz dans le BFUP classique, qui réagissent à la température élevée de 400 °C. L'addition des déchets de verre améliore la densification de l'interface entre les particules. Les particules de déchets de verre ont une grande rigidité, ce qui augmente le module d'élasticité du béton. Le BEVUP a également une très bonne durabilité. Sa porosité capillaire est très faible, et le matériau est extrêmement résistant à la pénétration d’ions chlorure (≈ 8 coulombs). Sa résistance à l'abrasion (indice de pertes volumiques) est inférieure à 1,3. Le BEVUP ne subit pratiquement aucune détérioration aux cycles de gel-dégel, même après 1000 cycles. Après une évaluation des BEVUP en laboratoire, une mise à l'échelle a été réalisée avec un malaxeur de béton industriel et une validation en chantier avec de la construction de deux passerelles. Les propriétés mécaniques supérieures des BEVUP a permis de concevoir les passerelles avec des sections réduites d’environ de 60% par rapport aux sections faites de BC. Le BEVUP offre plusieurs avantages économiques et environnementaux. Il réduit le coût de production et l’empreinte carbone des structures construites de béton fibré à ultra-hautes performances (BFUP) classique, en utilisant des matériaux disponibles localement. Il réduit les émissions de CO[indice inférieur 2] associées à la production de clinkers de ciment (50% de remplacement du ciment) et utilise efficacement les ressources naturelles. De plus, la production de BEVUP permet de réduire les quantités de déchets de verre stockés ou mis en décharge qui causent des problèmes environnementaux et pourrait permettre de sauver des millions de dollars qui pourraient être dépensés dans le traitement de ces déchets. Enfin, il offre une solution alternative aux entreprises de construction dans la production de BFUP à moindre coût.

Single particle motion of polymeric, colloidal, and biological materials

Small particles and their dynamics are of widespread interest due both to their unique properties and their ubiquity. Here, we investigate several classes of small particles: colloids, polymers, and liposomes. All these particles, due to their size on the order of microns, exhibit significant similarity in that they are large enough to be visualized in microscopes, but small enough to be significantly influenced by thermal (or Brownian) motion. Further, similar optical microscopy and experimental techniques are commonly employed to investigate all these particles. In this work, we develop single particle tracking techniques, which allow thorough characterization of individual particle dynamics, observing many behaviors which would be overlooked by methods which time or ensemble average. The various particle systems are also similar in that frequently, the signal-to-noise ratio represented a significant concern. In many cases, development of image analysis and particle tracking methods optimized to low signal-to-noise was critical to performing experimental observations. The simplest particles studied, in terms of their interaction potentials, were chemically homogeneous (though optically anisotropic) hard-sphere colloids. Using these spheres, we explored the comparatively underdeveloped conjunction of translation and rotation and particle hydrodynamics. Developing off this, the dynamics of clusters of spherical colloids were investigated, exploring how shape anisotropy influences the translation and rotation respectively. Transitioning away from uniform hard-sphere potentials, the interactions of amphiphilic colloidal particles were explored, observing the effects of hydrophilic and hydrophobic interactions upon pattern assembly and inter-particle dynamics. Interaction potentials were altered in a different fashion by working with suspensions of liposomes, which, while homogeneous, introduce the possibility of deformation. Even further degrees of freedom were introduced by observing the interaction of particles and then polymers within polymer suspensions or along lipid tubules. Throughout, while examination of the trajectories revealed that while by some measures, the averaged behaviors accorded with expectation, often closer examination made possible by single particle tracking revealed novel and unexpected phenomena.

Molecular and biological characterisation of orthobunyaviruses

Orthobunyaviruses are the largest genus within the Bunyaviridae family, with over 170 named viruses classified into 18 serogroups (Elliott and Blakqori, 2001; Plyusnin et al., 2012). Orthobunyaviruses are transmitted by arthropods and have a tripartite negative sense RNA genome, which encodes 4 structural proteins and 2 non-structural proteins. The non-structural protein NSs is the primary virulence factor of orthobunyaviruses and potent antagonist of the type I interferon (IFN) response. However, sequencing studies have identified pathogenic viruses that lack the NSs protein (Mohamed et al., 2009; Gauci et al., 2010). The work presented in this thesis describes the molecular and biological characterisation of divergent orthobunyaviruses. Data on plaque morphology, growth kinetics, protein profiles, sensitivity to IFN and activation of the type I IFN system are presented for viruses in the Anopheles A, Anopheles B, Capim, Gamboa, Guama, Minatitlan, Nyando, Tete and Turlock serogroups. These are complemented with complete genome sequencing and phylogenetic analysis. Low activation of IFN by Tete serogroup viruses, which naturally lack an NSs protein, was also further investigated by the development of a reverse genetics system for Batama virus (BMAV). Recombinant viruses with mutations in the virus nucleocapsid protein amino terminus showed higher activation of type I IFN in vitro and data suggests that low levels of IFN are due to lower activation rather than active antagonism. The anti-orthobunyavirus activity of IFN-stimulated genes IFI44, IFITMs and human and ovine BST2 were also studied, revealing that activity varies not only within the orthobunyavirus genus and virus serogroups but also within virus species. Furthermore, there was evidence of active antagonism of the type I IFN response and ISGs by non-NSs viruses. In summary, the results show that pathogenicity in man and antagonism of the type I IFN response in vitro cannot be predicted by the presence, or absence, of an NSs ORF. They also highlight problems in orthobunyavirus classification with discordance between classical antigen based data and phylogenetic analysis.

Sparse Signal Representation in Digital and Biological Systems

Theories of sparse signal representation, wherein a signal is decomposed as the sum of a small number of constituent elements, play increasing roles in both mathematical signal processing and neuroscience. This happens despite the differences between signal models in the two domains. After reviewing preliminary material on sparse signal models, I use work on compressed sensing for the electron tomography of biological structures as a target for exploring the efficacy of sparse signal reconstruction in a challenging application domain. My research in this area addresses a topic of keen interest to the biological microscopy community, and has resulted in the development of tomographic reconstruction software which is competitive with the state of the art in its field. Moving from the linear signal domain into the nonlinear dynamics of neural encoding, I explain the sparse coding hypothesis in neuroscience and its relationship with olfaction in locusts. I implement a numerical ODE model of the activity of neural populations responsible for sparse odor coding in locusts as part of a project involving offset spiking in the Kenyon cells. I also explain the validation procedures we have devised to help assess the model's similarity to the biology. The thesis concludes with the development of a new, simplified model of locust olfactory network activity, which seeks with some success to explain statistical properties of the sparse coding processes carried out in the network.

TRIB2 in human AML: a biological and clinical investigation

Acute myeloid leukemia (AML) involves the proliferation, abnormal survival and arrest of cells at a very early stage of myeloid cell differentiation. The biological and clinical heterogeneity of this disease complicates treatment and highlights the significance of understanding the underlying causes of AML, which may constitute potential therapeutic targets, as well as offer prognostic information. Tribbles homolog 2 (Trib2) is a potent murine oncogene capable of inducing transplantable AML with complete penetrance. The pathogenicity of Trib2 is attributed to its ability to induce proteasomal degradation of the full length isoform of the transcription factor CCAAT/enhancer-binding protein alpha (C/EBPα p42). The role of TRIB2 in human AML cells, however, has not been systematically investigated or targeted. Across human cancers, TRIB2 oncogenic activity was found to be associated with its elevated expression. In the context of AML, TRIB2 overexpression was suggested to be associated with the large and heterogeneous subset of cytogenetically normal AML patients. Based upon the observation that overexpression of TRIB2 has a role in cellular transformation, the effect of modulating its expression in human AML was examined in a human AML cell line that expresses high levels of TRIB2, U937 cells. Specific suppression of TRIB2 led to impaired cell growth, as a consequence of both an increase in apoptosis and a decrease in cell proliferation. Consistent with these in vitro results, TRIB2 silencing strongly reduced progression of the U937 in vivo xenografts, accompanied by detection of a lower spleen weight when compared with mice transplanted with TRIB2- expressing control cells. Gene expression analysis suggested that TRIB2 modulates apoptosis and cell-cycle sensitivity by influencing the expression of a subset of genes known to have implications on these phenotypes. Furthermore, TRIB2 was found to be expressed in a significant subset of AML patient samples analysed. To investigate whether increased expression of this gene could be afforded prognostic significance, primary AML cells with dichotomized levels of TRIB2 transcripts were evaluated in terms of their xenoengraftment potential, an assay reported to correlate with disease aggressiveness observed in humans. A small cohort of analysed samples with higher TRIB2 expression did not associate with preferential leukaemic cell engraftment in highly immune-deficient mice, hence, not predicting for an adverse prognosis. However, further experiments including a larger cohort of well characterized AML patients would be needed to clarify TRIB2 significance in the diagnostic setting. Collectively, these data support a functional role for TRIB2 in the maintenance of the oncogenic properties of human AML cells and suggest TRIB2 can be considered a rational therapeutic target. Proteasome inhibition has emerged as an attractive target for the development of novel anti-cancer therapies and results from translational research and clinical trials support the idea that proteasome inhibitors should be considered in the treatment of AML. The present study argued that proteasome inhibition would effectively inhibit the function of TRIB2 by abrogating C/EBPα p42 protein degradation and that it would be an effective pharmacological targeting strategy in TRIB2-positive AMLs. Here, a number of cell models expressing high levels of TRIB2 were successfully targeted by treatment with proteasome inhibitors, as demonstrated by multiple measurements that included increased cytotoxicity, inhibition of clonogenic growth and anti-AML activity in vivo. Mechanistically, it was shown that block of the TRIB2 degradative function led to an increase of C/EBPα p42 and that response was specific to the TRIB2-C/EBPα axis. Specificity was addressed by a panel of experiments showing that U937 cells (express detectable levels of endogenous TRIB2 and C/EBPα) treated with the proteasome inhibitor bortezomib (Brtz) displayed a higher cytotoxic response upon TRIB2 overexpression and that ectopic expression of C/EBPα rescued cell death. Additionally, in C/EBPα-negative leukaemia cells, K562 and Kasumi 1, Brtz-induced toxicity was not increased following TRIB2 overexpression supporting the specificity of the compound on the TRIB2-C/EBPα axis. Together these findings provide pre-clinical evidence that TRIB2- expressing AML cells can be pharmacologically targeted with proteasome inhibition due, in part, to blockage of the TRIB2 proteolytic function on C/EBPα p42. A large body of evidence indicates that AML arises through the stepwise acquisition of genetic and epigenetic changes. Mass spectrometry data has identified an interaction between TRIB2 and the epigenetic regulator Protein Arginine Methyltransferase 5 (PRMT5). Following assessment of TRIB2‟s role in AML cell survival and effective targeting of the TRIB2-C/EBPα degradation pathway, a putative TRIB2/PRMT5 cooperation was investigated in order to gain a deeper understanding of the molecular network in which TRIB2 acts as a potent myeloid oncogene. First, a microarray data set was interrogated for PRMT5 expression levels and the primary enzyme responsible for symmetric dimethylation was found to be transcribed at significantly higher levels in AML patients when compared to healthy controls. Next, depletion of PRMT5 in the U937 cell line was shown to reduce the transformative phenotype in the high expressing TRIB2 AML cells, which suggests that PRMT5 and TRIB2 may cooperate to maintain the leukaemogenic potential. Importantly, PRMT5 was identified as a TRIB2-interacting protein by means of a protein tagging approach to purify TRIB2 complexes from 293T cells. These findings trigger further research aimed at understanding the underlying mechanism and the functional significance of this interplay. In summary, the present study provides experimental evidence that TRIB2 has an important oncogenic role in human AML maintenance and, importantly in such a molecularly heterogeneous disease, provides the rational basis to consider proteasome inhibition as an effective targeting strategy for AML patients with high TRIB2 expression. Finally, the identification of PRMT5 as a TRIB2-interacting protein opens a new level of regulation to consider in AML. This work may contribute to our further understanding and therapeutic strategies in acute leukaemias.

Adventitious rooting of conifers: influence of biological factors

Vegetative propagation of superior conifer trees can be achieved e.g. through rooted cuttings or rooted microshoots, the latter predominantly through in vitro tissue culture. Both techniques are used to achieve rapid multiplication of trees with favorable genetic combinations and to capture a large proportion of the genetic diversity in a single generation cycle. However, adventitious rooting of shoots (cuttings) is often not efficient due to various problems such as scarcity of roots and cessation of their growth, both of which limit the application of vegetative propagation in some conifer species. Many factors are involved in the adventitious rooting of shoots including physical and chemical ones such as plant growth regulators, carbohydrates, light quality, temperature and rooting substrates or media (reviewed by Ragonezi et al. 2010). The focus of this review is on biological factors, such as inoculations with Agrobacterium rhizogenes, plant- growth-promoting rhizobacteria and other endophytes, and mycorrhizal fungi, which were found to stimulate adventitious rooting. These microorganisms could contribute not only to adventitious root development but also help in protecting conifer plants against pathogenic microorganisms, facilitate acclimation and transplanting, and contribute to more sustainable, chemical-free forests.

Effects of supplemental osteopontin on intestinal development and serum antibody responses to rotavirus vaccination in piglets

Milk contains numerous bioactive substances including immunoglobulins, cytokines, growth factors and components that exert antibiotic and prebiotic activity (Field, 2005). Little is known about the biological effects of individual milk bioactives, despite the fact that natural milk improves intestinal development and immune system functions in neonates (Donovan et al., 1994; Field, 2005) relative to milk formula. Characterization of the biological effects of such components is important for optimal production of infant milk formulas to be used when mother’s milk is not available. Milk components with preliminary evidence of positive effects on the intestinal growth and mucosal immunity include osteopontin (OPN). Osteopontin is a phosphorylated acidic glycoprotein expressed by a number of different immune and non-immune cells and tissues (Sodek et al., 2000). It is also present in body fluids including blood, bile and milk (Sodek et al., 2000). Osteopontin is a multifunctional protein that is implicated in a wide number of biological processes including cell survival, bone remodeling, and immune modulatory functions (Sodek et al., 2000). Furthermore, Schack and colleagues (2009) demonstrated that the concentration of OPN in human milk is considerably higher than in bovine milk and infant formulas. Taken together, it is likely that OPN plays a role in the early development of gastrointestinal tract and mucosal immune responses in infants. Since the neonatal pig shares anatomical, physiological, immunological, and metabolic similarities with the human infants (Moughan, et al., 1992), they were selected as the animal model in our studies. Our first aim was to investigate the effects of OPN on piglet intestinal development. Newborn, colostrum-deprived piglets (n=27) were randomized to receive three treatments: formula with bovine OPN (OPN; 140 mg/L); formula alone (FF); or sow reared (SR) for 21 days. Body weight, intestinal weight and length, mucosal protein and DNA content, disaccharidase activity, villus morphology, and crypt cell proliferation were measured. Statistical significance was assigned at P<0.05. No significant effects of OPN were observed for body weight, intestinal weight and length. Mucosal protein content of SR piglets was lower than FF and OPN piglets in the duodenum, but higher than FF and OPN piglets in the ileum. No significant effects of diet in mucosal DNA content were detected for the three regions of the small intestine. Lactase and sucrase activities of SR piglets were higher than the two formula-fed groups in the duodenum, lower in the ileum. No significant effects of diet on lactase and sucrase activities were noted between two formula-fed groups in the duodenum and ileum. Jejunal lactase activity of FF piglets was higher than SR piglets, whereas no significant effect of diet was observed in jejunal sucrase activity among the three groups. Duodenal and ileal villus height and villus area of SR piglets were lower than two formula-fed groups, while OPN piglets did not differ from FF piglets. There was a significant effect of diet (P<0.0001) on jejunal crypt cell proliferation, with proliferation in OPN piglets being intermediate between that of FF and SR. In summary, supplemental OPN increased jejunal crypt cell proliferation, independent of evident morphological growth, and had a minor impact on disaccharidase activity in the small intestine of neonatal piglets. Rotavirus (RV) is the most common viral cause of severe gastroenteritis in infants and young children worldwide (Parashar et al., 2006). Maeno et al. (2009) reported that OPN knockout (OPN-KO) suckling mice were more susceptible to RV infection compared to wild-type (WT) suckling mice. To detect the role of OPN in intestinal immune responses of neonates, the goal of the second study was to evaluate whether supplemental OPN influenced the serum antibody responses to RV vaccination in neonatal piglets. Newborn, colostrum-deprived piglets were randomized into two dietary groups: formula with bovine OPN (OPN; 140 mg/L) and formula alone (FF) for 35 days. On d7, piglets in each dietary group were further randomized to receive rotavirus (RV) vaccination (Rotarix®) (FF+RV and OPN+RV) or remained non-vaccinated (FF+NV and OPN+NV). Booster vaccination was provided on d14. Blood samples were collected on d7, 14, 21, 28 and 35. RV-specific serum immunoglobulin (Ig) G, IgA, IgM and total serum IgG, IgA, IgM were measured by ELISA. Statistical significance was assigned at P<0.05, with trends reported as P<0.10. Body weight gain was unaffected by diet and/or vaccination. No significant effect of oral OPN supplementation was observed for RV-specific antibody responses and total Igs levels. After the combination of dietary groups, RV piglets had significantly higher RV-specific IgM concentrations compared to NV piglets. Although there were higher means of RV-specific IgG and RV-specific IgA concentrations in RV group than their counterparts in NV group, the difference did not reach statistical significance. RV-specific IgM reached a peak at d7 post booster vaccination (PBV), whereas the RV-specific IgG and IgA peaked later at PBV 14 or 21. Total Igs were unaffected by RV vaccination but were significantly increased over time, following similar pattern as RV-specific Igs. In summary, neonatal piglets generated weak antibody responses to RV vaccination. Supplemental OPN did not enhance RV-specific serum antibody responses and total serum Igs levels in neonatal piglets with or without RV vaccination. In conclusion, we observed normal developmental changes in the small intestine and serum Igs levels in neonatal piglets over time. Oral OPN supplementation showed minimal impacts on intestinal development and no effect on serum Igs levels. The role of supplemental OPN on the growth and development of infants is still inconclusive. Future studies should measure other physiological and immunological parameters by using different models of vaccination or infection.

Biological activities (antibacterial, antifungal and cytotoxic) of secondary metabolites of Ircinia spp.

Sponges are the most primitive of the multicellular, These organisms don’t have any mechanical defense system, so their early appearance in evolution has given them a lot of time for the development of advanced secondary metabolites as chemical defense system. Sponges have the potential to provide drugs from chemical components against diseases. In this investigation the sponge samples, which it is Ircina spp., were collected at depth of 15- 24 meter, from locations on the coastline of Island Kish in Persian Gulf of Iran. For identifying natural components, methanolic and diethyletter were used as extraction solvents, after removal of the solvents, the GC/MS spectra of the fraction were obtained. Then in vitro cytotoxic, antimicrobial and antifungal were identified. In vitro cytotoxity screening, by XTT assay, against KB/ C359 and HUT-56/ C365 cell line, was conducted in this study in 1 - 544 μg/ml. IC54 for winter diethyletter extract was 325 μg/ml, winter methanolic extract was 364 μg/ml, IC54 for summer diethyletter extract was 544 μg/ml, and summer methanolic extract was 454 μg/ml in HUT-56. IC54 for winter diethyletter extract was 454 μg/ml, winter methanolic extract was 444 μg/ml, IC54 for summer diethyletter extract was 344 μg/ml, and summer methanolic extract was 424 μg/ml in KB. In vitro antimicrobial activity by Broth Dilution Methods against clinical gram-positives and gram negatives (Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus and Bacillus subtilis). The results conducted that the MIC values of winter diethyletter extract for Escherichia coli 24mg/ml, the MIC values of winter diethyletter extract for Escherichia coli 24mg/ml, the MIC and MBC values of winter diethyletter extract for Staphylococcus aureus was 2mg/ml and 24mg/ml. The MIC and MBC values of winter diethyletter extract for Bacillus subtilis was 1.5 mg/ml and 2mg/ml. In vitro antifungal activity by Broth Dilution Methods against clinical pathogens; Candida albicans and Aspergillus fumigatus. The results conducted that the aqueous extracts didn’t have any antifungal activities on pathogens, the MFC of the summer and winter diethyletter extract was 30 mg/ml and 2 mg/ml A. fumigates, the summer and winter methanolic extract was 0722 mg/ml and 2 mg/ml A. fumigates, the summer and winter methanolic was 4/75mg/ml, MFC 5 mg/ml on C. albicans.

Biomarkers of Nitrosative Stress: Development and validation of a new analytical method for 3-Nitrotyrosine quantification

Background: The nitration of tyrosine residues in proteins is associated with nitrosative stress, resulting in the formation of 3-nitrotyrosine (3-NT). 3-NT levels in biological samples have been associated with numerous physiological and pathological conditions. For this reason, several attempts have been made in order to develop methods that accurately quantify 3-NT in biological samples. Regarding chromatographic methods, they seem to be very accurate, showing very good sensibility and specificity. However, accurate quantification of this molecule, which is present at very low concentrations both at physiological and pathological states, is always a complex task and a target of intense research. Objectives: We aimed to develop a simple, rapid, low-cost and sensitive 3-NT quantification method for use in medical laboratories as an additional tool for diagnosis and/or treatment monitoring of a wide range of pathologies. We also aimed to evaluate the performance of the HPLC-based method developed here in a wide range of biological matrices. Material and methods: All experiments were performed on a Hitachi LaChrom Elite® HPLC system and separation was carried out using a Lichrocart® 250-4 Lichrospher 100 RP-18 (5μm) column. The method was further validated according to ICH guidelines. The biological matrices tested were serum, whole blood, urine, B16 F-10 melanoma cell line, growth medium conditioned with the same cell line, bacterial and yeast suspensions. Results: From all the protocols tested, the best results were obtained using 0.5% CH3COOH:MeOH:H2O (15:15:70) as the mobile phase, with detection at wavelengths 215, 276 and 356 nm, at 25ºC, and using a flow rate of 1 mL/min. By using this protocol, it was possible to obtain a linear calibration curve (correlation coefficient = 1), limits of detection and quantification in the order of ng/mL, and a short analysis time (<15 minutes per sample). Additionally, the developed protocol allowed the successful detection and quantification of 3-NT in all biological matrices tested, with detection at 356 nm. Conclusion: The method described in this study, which was successfully developed and validated for 3-NT quantification, is simple, cheap and fast, rendering it suitable for analysis in a wide range of biological matrices.