The boundary of palaearctic and oriental realms in western China

In the world-wide zoogeographic division, there has been no consentaneous understanding about the delimitation between palaearctic and oriental realms in western China. In this study, we will discuss the division based on amphibian distribution in Shaanxi, Gansu, Sichuan, Yunnan, and Tibet according to species coefficient similarity between each zoogeographic province. The results show that the northern border lies from Qinling Mountains-Feng Xian (Shaanxi)-Debu (Gansu)-Aba (Sichuan)-Batang-Bomi (Tibet), to Linzhi districts, and the southern border is from Taibai-Feng Xian in Shaanxi-Wen Xian (Gansu)-Songpan-Kangding-Daocheng (Sichuan), to Zhongdian-Gongshan in Yunnan, and westward to Motuo and Bomi district in Tibet. (c) 2008 National Natural Science Foundation of China and Chinese Academy of Sciences. Published by Elsevier Limited and Science in China Press. All rights reserved.

华北克拉通新生代玄武岩携带的地幔橄榄岩Fe同位素地球化学及含金云母地幔岩岩石学研究

In recent years, thanks to the improvement of analytical methods and the use of MC-ICP-MS, Fe isotope can be measured precisely. Fe isotope shows considerable variation both in biological and inorganic processes (from low T to high T) in nature, Therefore, Fe isotope has become one of the exciting frontier sciences and has favorable prospects of the application to the geosciences and life sciences. Based on a comprehensive review of available references in the related field, this study focuses on the development of techniques for high-precision measurement of iron isotope using MC-ICP-MS, and application of the techniques developed to study the Fe isotopes as well as major and trace element compositions of minerals (Ol, Opx, Cpx and Sp) from spinel peridotitic xenoliths from Cenozoic alkaline basalts to investigate Fe isotopic features of the lithospheric mantle beneath the North China Craton. The minerals from these xenoliths are similar to those off-cratonic peridotites world-wide, but are remarkably different from those on-cratonic peridotites and clinopyroxenes from these spinel lherzolites exhibit two types of chondrite-normalized REE patterns i.e. LREE-depleted and flat or spoon-shaped. It is noted that total abundances of REE in clinopyroxenes from these peridotites show a broad negative correlation with Cr# numbers of Cpx and Sp. The Fe isotope results show that the spinel peridotitic xenoliths have small but distinguishable Fe isotopic variations in minerals (generally Ol < Opx < Cpx) and samples, and the isotopic range in spinel is relatively large. Positive linear relationship with the ε57Fecpx/ε57Feopx ratio close to one unit has been observed between Fe isotopes of coexistent Opx and Cpx, indicating that the Cpx and Opx have generally reached Fe isotopic equilibrium. However, Fe isotopes between the Ol and Sp show apparent disequilibrium. The broadly negative correlation between mineral Fe isotopes and oxygen fugacity (fo2), metasomatic indexes such as spinel Cr#, (La/Yb) N and (La/Sm) N ratios of clinopyroxenes suggest that Fe isotopic variations in different minerals and peridotites were probably produced by melt-peridotite interaction. This study further confirms the previous observation that the lithospheric mantle has distinguishable and heterogeneous Fe isotopic variations at a scale of xenoliths. Mantle metasomatism that induces the interaction of the lithospheric mantle peridotite with metasomatic agent is a most potential mechanism for the Fe isotope fractionation in mantle peridotites. Therefore, Fe isotope could be a new and powerful tool to probe the evolution of the lithospheric mantle. We also report mineral compositions, clinopyroxene trace element concentrations and Sr-Nd isotopes for newly-discovered phlogopite-bearing spinel lherzolite and olivine clinopyroxenite xenoliths from three different localities （Hannuoba, Hebei Province; Jining Sangyitang, Inner Mongolia; Hebi, Henan Province）of the North China Craton. Systematic comparisons with phlogopite-free spinel lherzolite xenolith from the same locality reveals that the phlogopite-bearing peridotitic xenoliths have relatively higher Al2O3, CaO, Na2O, K2O, TiO2 contents and lower MgO contents than those phogopite-free counterparts. The former also has higher LREE concentrations, but relatively less radiogenic Sr-Nd isotopic ratios. This demonstrates that mantle metasomatism can not only enrich the basaltic components and trace element concentrations, but also make a decrease in Mg# of the peridotites and olivines and a relative depletion in Sr-Nd isotopes. 87Rb/86Sr-87Sr/86Sr isochrons of the phlogopite-bearing xenoliths indicate that mantle metasomatism happened in the Mesozoic and/or Cenozoic time. The metasomatic agent was derived from the asthenosphere. The result also manifests that the widespread similarity of the geochemical features such as major and trace elements and isotopic compositions in the Cenozoic lithospheric mantle beneath the North China Craton to those “oceanic” lithospheric mantle could be as a result of the ubiquitous presence of the interaction between the old refractory peridotites and the infiltrated asthenospheric melt, rather than the actually newly-accreted lithospheric mantle.

Festival Images: brand image and stakeholders' brand relationship types at the Edinburgh Festival Fringe.

The Edinburgh Festival Fringe (The Fringe) is the largest arts festival in the world and it has inspired the creation of similar festivals world-wide. Since its conception in 1947, the Fringe has demonstrated significant growth in visitor numbers; ticket sales; and its economic contribution. Despite this, the sustainable future of Edinburgh’s festivals is debated as Edinburgh, ‘the Festival City’, faces threats from other festival destinations. Festivals position Edinburgh creatively in contrast to the city’s traditionally perceived image as a cultural-historic centre. Despite this, little research has been undertaken into the creative and cultural significance of Edinburgh’s festivals, including the Fringe. This interdisciplinary research grounded in marketing, tourism, and festival and event management; and underpinned by constructivism, presents an understanding of types of brand relationships that exist between the Fringe and its primary stakeholders. This is achieved through defining both the Fringe brand image and its primary stakeholders; and applying these definitions to the development of a typology of Fringe-stakeholders’ brand relationships. The significance of this study is evident within its topic of inquiry and the research methods applied. In the little-considered arena of arts festivals and their stakeholders, this is the first in-depth study into the Fringe as a festival and festival brand. Within this, the definition of a Fringe brand image contributes to understanding the cultural and creative significance of the Fringe. Furthermore, this research contributes a unique understanding of the types of stakeholders that are engaged with the Fringe. The types of brand relationships that exist between these stakeholders and the Fringe are another significant contribution to knowledge and understanding. While specific to the present context, these findings may prove transferable to further festivals or events, and related areas and industries. The contribution made by this research to the methodological developments in festival and event studies is of additional significance. The application of visual research methods, including semiotic analysis and photo-elicitation within phenomenological interviews, has previously been applied in marketing, consumer, and tourism research, but not to the understanding of festival brands and stakeholders’ brand relationship types. Findings of this research illustrate that existing marketing and consumer brand frameworks and stakeholder theories are applicable to festivals. Further, it is possible to define ‘a’ Fringe brand image which is subjective and contradictory. The unique open-access and organic, operational model of the Fringe facilitates its many contributors, and consumers. Fringe stakeholders may be categorised according to their level of engagement with the Fringe (as primary or secondary) and their particular stakeholder role(s), which are varied and multiple. Fringe-stakeholder brand relationship types are overwhelmingly positive; and are based upon interpersonal relationship dimensions (including friendships, marriages, kinships and partnerships). Fringe-stakeholder brand relationship types can be classified therefore as having similar dimensions to those brand relationship types previously described for consumer products and brands.

Griping, bitching and speaking your mind: defamation and free expression on the internet

Diane Rowland, Griping, Bitching and Speaking Your Mind: Defamation and Free Expression on the Internet, Pennsylvania State Law Review Symposium Issue 110, no. 3 (2006): 519?538; RAE2008

Characterisation of bacteriophage-host interactions in Lactococcus lactis

Lactococcus lactis is used extensively world-wide for the production of fermented dairy products. Bacteriophages (phages) infecting L. lactis can result in slow or incomplete fermentations, or may even cause total fermentation failure. Therefore, bacteriophages disrupting L. lactis fermentation are of economic concern. This thesis employed a multifaceted approach to investigate various molecular aspects of phage-host interaction in L. lactis. The genome sequence of an Irish dairy starter strain, the prophage-cured L. lactis subsp. cremoris UC509.9, was studied. The 2,250,427 bp circular chromosome represents the smallest among its sequenced lactococcal equivalents. The genome displays clear genetic adaptation to the dairy niche in the form of extensive reductive evolution. Gene prediction identified 2066 protein-encoding genes, including 104 which showed significant homology to transposase-specifying genes. Over 9 % of the identified genes appear to be inactivated through stop codons or frame shift mutations. Many pseudogenes were found in genes that are assigned to carbohydrate and amino acid transport and metabolism orthologous groups, reflecting L. lactis UC509.9’s adaptation to the lactose and casein-rich dairy environment. Sequence analysis of the eight plasmids of L. lactis revealed extensive adaptation to the dairy environment. Key industrial phenotypes were mapped and novel lactococcal plasmid-associated genes highlighted. In addition to chromosomally-encoded bacteriophage resistance systems, six functional such systems were identified, including two abortive infection systems, AbiB and AbiD1, explaining the observed phage resistance of L. lactis UC509.9 Molecular analysis suggests that the constitutive expression of AbiB is not lethal to cells, suggesting the protein is expressed in an un/inactivated form. Analysis of 936 species phage sk1-escape mutants of AbiB revealed that all such mutants harbour mutations in orf6, which encodes the major capsid protein. Results suggest that the major capsid protein is required for activation of the AbiB system, although this requires furrther investigations. Temporal transcriptomes of L. lactis UC509.9 undergoing lytic infection with either one of two distinct bacteriophages, Tuc2009 and c2, was determined and compared to the transcriptome of uninfected UC509.9 cells. Whole genome microarrays performed at various time-points post-infection demonstrated a rather modest impact on host transcription. Alterations in the UC509.9 transcriptome during lytic infection appear phage-specific, with a relatively small number of differentially transcribed genes shared between infection with either Tuc2009 or c2. Transcriptional profiles of both bacteriophages during lytic infection was shown to generally correlate with previous studies and allowed the confirmation of previously predicted promoter sequences. Bioinformatic analysis of genomic regions encoding the presumed cell wall polysaccharide (CW PS) biosynthesis gene cluster of several strains of L. lactis was performed. Results demonstrate the presence of three dominant genetic types of this gene cluster, termed type A, B and C. These regions were used for the development of a multiplex PCR to identify CW PS genotype of various lactococcal strains. Analysis of 936 species phage receptor binding protein phylogeny (RBP) and CW PS genotype revealed an apparent correlation between RBP phylogeny and CW PS type, thereby providing a partial explanation for the observed narrow host range of 936 phages. Further analysis of the genetic locus encompassing the presumed CW PS biosynthesis operon of eight strains identified as belonging to the CW PS C (geno)type, revealed the presence of a variable region among the examined strains. The obtained comparative analysis allowed for the identification of five subgroups of the C type, named C1 to C5. We purified an acidic polysaccharide from the cell wall of L. lactis 3107 (C2 subtype) and confirmed that it is structurally different from the CW PS of the C1 subtype L. lactis MG1363. Combinations of genes from the variable region of C2 subtype were amplified from L. lactis 3107 and introduced into a mutant of the C1 subtype L. lactis NZ9000 (a direct derivative of MG1363) deficient in CW PS biosynthesis. The resulting recombinant mutant synthesized a CW PS with a composition characteristic for that of the C2 subtype L. lactis 3107 and not the wildtype C1 L. lactis NZ9000. The recombinant mutant exhibited a changed phage resistance/sensitivity profile consistent with that of L. lactis 3107, which unambiguously demonstrated that L. lactis 3107 CW PS is the host cell surface receptor of two bacteriophages belonging to the P335 species as well as phages that are member of the 936 species. The research presented in this thesis has significantly advanced our understanding of L. lactis bacteriophage-host interactions in several ways. Firstly, the examination of plasmidencoded bacteriophage resistance systems has allowed inferences to be made regarding the mode of action of AbiB, thereby providing a platform for further elucidation of the molecular trigger of this system. Secondly, the phage infection transcriptome data presented, in addition to previous work, has made L. lactis a model organism in terms of transcriptomic studies of bacteriophage-host interactions. And finally, the research described in this thesis has for the first time explicitly revealed the nature of a carbohydrate bacteriophage receptor in L. lactis, while also providing a logical explanation for the observed narrow host ranges exhibited by 936 and P335 phages. Future research in discerning the structures of other L. lactis CW PS, combined with the determination of the molecular interplay between receptor binding proteins of these phages and CW PS will allow an in depth understanding of the mechanism by which the most prevalent lactococcal phages identify and adsorb to their specific host.

Monitoring behaviours and experiences before, during and after pregnancy in Ireland

Background: On-going surveillance of behaviours during pregnancy is an important but overlooked population health activity that is particularly lacking in Ireland. Few, if any, nationally representative estimates of most maternal behaviours and experiences are available. While on-going surveillance of maternal behaviours has not been a priority thus far in European countries including Ireland, on-going surveillance was identified as a key priority in the United States (US) during the 1980’s when the Pregnancy Risk Assessment Monitoring System (PRAMS), was established. Today, PRAMS is the only surveillance programme of maternal behaviours and experiences world-wide. Although on-going prevalence estimates are required in Ireland, studies which examine the offspring health effects of maternal behaviours are also required, since various questions regarding maternal exposures and their offspring health effects remain unanswered. Gestational alcohol consumption is one such important maternal exposure which is common in pregnancy, though its offspring health effects are unclear, particularly at lower or moderate levels. Thus, guidelines internationally have not reached consensus on safe alcohol recommendations for pregnant women. The aims of this thesis are to implement the PRAMS in Ireland (PRAMS Ireland), to describe the prevalence of health behaviours around the time of pregnancy in Ireland and to examine the effect of health behaviours on pregnancy and child outcomes (specifically the relationship between alcohol use during pregnancy and infant and child growth). Structure: In Chapter 1, a brief background and rationale for the work, as well as the thesis aims and objective is provided. A detailed description of the design and implementation of PRAMS Ireland is described in Chapter 2. Chapter 3 and Chapter 4 describe the methodological results of the implementation of the PRAMS Ireland pilot study and PRAMS Ireland main study. In Chapter 5, a comparison of alcohol prevalence in two Irish studies (PRAMS Ireland and Growing up in Ireland (GUI)) and one multi-centre prospective cohort study, Screening for Pregnancy Endpoints (SCOPE) Study is detailed. Chapter 6 describes findings on adherence to National Clinical Guidelines on health behaviours and nutrition around the time of pregnancy in PRAMS Ireland. Findings on exposure to alcohol use in pregnancy and infant growth outcomes are described in Chapter 7 and Chapter 8. The results of analysis conducted to examine the impact of gestational alcohol use on offspring growth trajectories to age ten are described in Chapter 9. Finally, a discussion of the findings, strengths and limitations of the thesis, direction for future research, policy, practice and public health implications are discussed in Chapter 10.Results: Implementation of PRAMS: PRAMS may be an effective system for the surveillance of health behaviours around the time of pregnancy in the Irish context. PRAMS Ireland had high response rates (67% and 61% response rates in the pilot and main study respectively), high item completion rates and valid prevalence estimates for many health behaviours. Examining prevalence of health behaviours: We found high levels of alcohol consumption before and during pregnancy, poor adherence to healthy diets and high levels of smoking before and during pregnancy among women in Ireland. Socially disadvantaged women had higher rates of deleterious health behaviours before pregnancy, although women with the most deleterious behaviour profiles before pregnancy appeared to experience the greatest gain in protective health behaviours during pregnancy. The impact of alcohol use on infant and offspring growth: We found that low and moderate levels of alcohol use did not impact on birth outcomes or offspring growth whereas heavy alcohol consumption resulted in reduced birth length and birth weight; however, this finding was not consistently observed across all studies. Selection, reporting and confounding biases which are common in observational research could be masking harmful effects. Conclusion: PRAMS is a valid and feasible method of surveillance of health behaviours around the time of pregnancy in Ireland. A surveillance program of maternal behaviours and experiences is immediately warranted due to high levels of deleterious health behaviours around the time of pregnancy in Ireland. Although our results do not indicate any evidence of harm, given the quality of evidence available, abstinence and advice of abstinence from alcohol may be the most prudent choice for patients and healthcare professionals respectively. Further studies of the effects of gestational alcohol use are required; particularly those which can reduce selection bias, reporting bias and confounding.

Investigation of wall-slip effect on paste release characteristic in flip-chip stencil printing process

As the trend toward further miniaturisation of pocket and handheld consumer electronic products continues apace, the requirements for even smaller solder joints will continue. With further reductions in the size of solder joints, the reliability of solder joints will become more and more critical to the long-term performance of electronic products. Solder joints play an important role in electronics packaging, serving both as electrical interconnections between the components and the board, and as mechanical support for components. With world-wide legislation for the removal/reduction of lead and other hazardous materials from electrical and electronic products, the electronics manufacturing industry has been faced with an urgent search for new lead-free solder alloy systems and other solder alternatives. In order to achieve high volume, low cost production, the stencil printing process and subsequent wafer bumping of solder paste has become indispensable. There is wide agreement in industry that the paste printing process accounts for the majority of assembly defects, and most defects originate from poor understanding of the effect of printing process parameters on printing performance. The printing of ICAs and lead-free solder pastes through the very small stencil apertures required for flip chip applications was expected to result in increased stencil clogging and incomplete transfer of paste to the printed circuit pads. Paste release from the stencil apertures is dependent on the interaction between the solder paste, surface pad and aperture wall; including its shape. At these very narrow aperture sizes the paste rheology becomes crucial for consistent paste withdrawal because for smaller paste volumes surface tension effects become dominant over viscous flow. Successful aperture filling and release will greatly depend on the rheology of the paste material. Wall-slip plays an important role in characterising the flow behaviour of solder paste materials. The wall- slip arises due to the various attractive and repulsive forces acting between the solder particles and the walls of the measuring geometry. These interactions could lead to the presence of a thin solvent layer adjacent to the wall, which gives rise to slippage. The wall slip effect can play an important role in ensuring successful paste release after the printing process. The aim of this study was to investigate the influence of the paste microstructure on slip formation for the paste materials (lead-free solder paste and isotropic conductive adhesives). The effect of surface roughness on the paste viscosity was investigated. It was also found that altering the surface roughness of the parallel plate measuring geometry did not significantly eliminate wall slip as was expected. But results indicate that the use of a relatively rough surface helps to increase paste adhesion to the plates, inducing structural breakdown of the paste. Most importantly, the study also demonstrated on how the wall slip formation in the paste material could be utilised for understanding of the paste microstructure and its flow behaviour