Dietary supplement use and its impact on nutritional adequacy for British Columbia and Manitoba First Nations adults living on reserve.

Contexte: L'utilisation de suppléments alimentaires est répandue chez les populations américaines et canadiennes en général, mais on en sait peu sur la consommation de suppléments alimentaires dans la population autochtone canadienne. Objectif: L'objectif général de cette étude est de prendre en compte l'utilisation de suppléments alimentaires dans l'évaluation nutritionnelle des apports alimentaires des adultes des Premières nations vivant dans les réserves en Colombie-Britannique et Manitoba. Conception: Les données ont été recueillies par l’étude ‘First Nations Food, Nutrition, and Environment Study’ de 1103 (Colombie-Britannique) et 706 (Manitoba) adultes des Premières Nations âgés de 19 à 70 ans. L'étude a utilisé un rappel alimentaire des dernières 24 heures (avec un deuxième rappel pour un sous-échantillon) pour évaluer la diète alimentaire. L'utilisation de suppléments alimentaires et des antiacides ont été recueillis par un questionnaire de fréquence. En utilisant le logiciel SIDE pour tenir compte des variations intra-individuelles dans la prise alimentaire et la technique du bootstrap pour obtenir des estimations représentatives des différentes régions, l'utilisation de suppléments de la vitamine A, D, C et de calcium ont été intégrées aux estimations de la consommation alimentaire. Résultats: Environ 30% des adultes des Premières Nations de la Colombie-Britannique et seulement 13,2% des adultes des Premières Nations du Manitoba âgés entre 19-70 ans vivant dans les réserves ont déclaré utiliser au moins un supplément alimentaire durant les 30 jours précédents. Lors de l'examen des nutriments d'intérêt, un plus faible pourcentage de la population en a fait usage, de 14,8 à 18,5% en Colombie-Britannique et de 4,9 à 8% de la population du Manitoba. La prévalence de l'usage de tout supplément alimentaire était plus élevée chez les femmes que chez les hommes dans tous les groupes d'âge et augmente avec l'âge dans les deux sexes. La plus forte prévalence d'un apport insuffisant provenant de la nourriture a été observée pour la vitamine D et le calcium en Colombie-Britannique et Manitoba, variant de 75 à 100%, et de la vitamine A dans le Manitoba (73-96%). Après avoir examiné l'utilisation de suppléments alimentaires, plus des trois quarts des participants n’ont toujours pas réussi à répondre au besoin moyen estimatif pour ces nutriments. La vitamine C est l'oligo-élément avec le plus faible pourcentage sous le besoin moyen estimatif (avec au sans suppléments) pour la Colombie-Britannique et le Manitoba. Conclusion: La majorité des adultes des Premières nations de la Colombie-Britannique et du Manitoba, même après prise en compte de l'utilisation de suppléments alimentaires, avaient des apports en vitamines A, D et des apports de calcium sous les niveaux recommandés. L'utilisation de compléments alimentaires n'a pas contribué de façon significative à l'apport total en nutriments sélectionnés sauf pour la vitamine C dans certains groupes d'âge.

Immune potential and differentiation of equine induced pluripotent stem cells (eiPSC)

Induced pluripotent stem cells (iPSC) have the capacity to self renew and differentiate into a myriad of cell types making them potential candidates for cell therapy and regenerative medicine. The goal of this thesis was to determine the characteristics of equine iPSC (eiPSC) that can be harnessed for potential use in veterinary regenerative medicine. Trauma to a horse’s limb often leads to the development of a chronic non-healing wound that lacks a keratinocyte cover, vital to healing. Thus, the overall hypothesis of this thesis was that eiPSC might offer a solution for providing wound coverage for such problematic wounds. Prior to considering eiPSC for clinical applications, their immunogenicity must be studied to ensure that the transplanted cells will be accepted and integrate into host tissues. The first objective of this thesis was to determine the immune response to eiPSC. To investigate the immunogenicity of eiPSC, the expression of major histocompatibility complex (MHC) molecules by the selected lines was determined, then the cells were used in an intradermal transplantation model developed for this study. While transplantation of allogeneic, undifferentiated eiPSC elicited a moderate cellular response in experimental horses, it did not cause acute rejection. This strategy enabled the selection of weakly immunogenic eiPSC lines for subsequent differentiation into lineages of therapeutic importance. Equine iPSC offer a potential solution to deficient epithelial coverage by providing a keratinocyte graft with the ability to differentiate into other accessory structures of the epidermis. The second objective of this thesis was to develop a protocol for the differentiation of eiPSC into a keratinocyte lineage. The protocol was shown to be highly efficient at inducing the anticipated phenotype within 30 days. Indeed, the eiPSC derived vi keratinocytes (eiPSC-KC) showed both morphologic and functional characteristics of primary equine keratinocytes (PEK). Moreover, the proliferative capacity of eiPSC-KC was superior while the migratory capacity, measured as the ability to epithelialize in vitro wounds, was comparable to that of PEK, suggesting exciting potential for grafting onto in vivo wound models. In conclusion, equine iPSC-derived keratinocytes exhibit features that are promising to the development of a stem cell-based skin construct with the potential to fully regenerate lost or damaged skin in horses. However, since eiPSC do not fully escape immune surveillance despite low MHC expression, strategies to improve engraftment of iPSC derivatives must be pursued.

Usage de la force policière au Québec : une analyse des facteurs individuels, situationnels et contextuels

Au Québec, le policier a l’autorité de faire respecter plusieurs lois et d’assurer le maintien de l’ordre. Puisque le policier peut être confronté à une multiplicité de problématiques, il est, dans certaines circonstances, contraint à employer une force pour se protéger lui-même ou pour protéger toute autre personne contre la mort ou contre des lésions corporelles graves. Cependant, bien que l’usage de la force par la police soit l’un des éléments les plus visibles et les plus controversés de l’intervention policière, les connaissances sur ce sujet spécifique demeurent limitées. Afin de pallier à certaines lacunes de la recherche et de la théorie, l’objectif général de ce mémoire vise à identifier les facteurs individuels, situationnels et contextuels liés au niveau de force utilisé par la police lors d’une intervention dans les postes de quartier et dans les secteurs de recensement. Les données dans le cadre de cette étude proviennent des rapports d’incidents déclarés d’usage de la force d’un service de police canadien pour une période couvrant les années 2007 à 2011, les données issues du recensement canadien de 2006 et les données criminelles issues du Programme de déclaration uniforme de la criminalité (DUC). La stratégie analytique privilégiée est la modélisation hiérarchique qui permettra de tester les liens entre les différents niveaux d’analyse. Au terme des analyses multiniveaux, les résultats indiquent que plusieurs facteurs ont un impact sur le niveau de force utilisé par le policier. Au niveau des déterminants individuels du sujet, c’est le fait d’être un homme, de résister physiquement à l’intervention et de posséder une arme qui est associé à des niveaux plus élevés de force. Au niveau des facteurs contextuels, on découvre que la proportion de minorité visible et le désavantage social ont un impact appréciable sur le niveau de force utilisé par le policier. Ces résultats nous amènent donc à conclure que les policiers tiennent surtout compte de la situation immédiate (facteurs individuels et situationnels) pour évaluer le degré de dangerosité ou de menace, mais qu’ils sont également influencés par l’endroit où ils se trouvent. D’autres études sont toutefois nécessaires pour vérifier la constance de nos résultats.

Le concept de double-usage de la recherche : un outil diagnostique de l’analyse éthique des risques associés aux usages neuroamélioratifs de la recherche en neurosciences

Les technologies de stimulations transcrâniennes – tel que la tDCS ou la TMS – présentent à l’heure actuelle d’intéressantes perspectives thérapeutiques, tout comme diverses améliorations cognitives chez le sujet « non-malade » dont découlent des applications neuroamélioratives, plus ou moins imminentes, en dehors du cadre clinique ou investigatoire. Est proposé ici d’analyser les risques associés à ces applications, détournées des objectifs premiers de recherche, et aux préoccupations éthiques qui les accompagnent (autonomie, justice, intégrité physique), via un concept généralement associé aux recherches avec des perspectives de sécurité nationale et associées à un niveau de risque élevé. Révisant la trivialité d’une définition dichotomique aux usages « bons » et « mauvais », est proposé d’étendre le concept de « double-usage » pour l’appliquer à la neuroamélioration comme un mésusage de la recherche en neurosciences. Faisant référence au conflit entre, d’une part, le respect de la liberté académique et, d’autre part, la protection de la sécurité et de la santé publique, ce concept s’avère être un outil diagnostique pertinent pour l’évaluation des risques associés à l’usage mélioratif desdites technologies, et plus particulièrement de la tDCS, afin d’alimenter la réflexion sur la régulation de ces dispositifs en amont de leur utilisation, selon un principe de précaution inhérent au double-usage de la recherche. Ce concept permet ainsi de réfléchir à la mise en place d’une gouvernance proactive et contextualisée impliquant une responsabilité partagée d’un large panel d’acteurs, nécessaire au vu des avancées rapides du domaine des neurosciences et de l’imminence de l’arrivée sur le marché de ces dispositifs.

Perspectives de l'usage de poudre de jaunes d’oeuf comme additif alimentaire contre Campylobacter jejuni chez le poulet : mode d'immunisation et effet de l’encapsulation

La campylobactériose est une zoonose causée par Campylobacter jejuni, une bactérie commensale du poulet, considérée comme la principale source de contamination humaine. C. jejuni est rarement retrouvé dans le tube digestif des poulets avant deux ou trois semaines d'âge. Ce qui pourrait s'expliquer par la transmission d'une immunité maternelle (anticorps IgY) transmise aux poussins via le jaune d'œuf. À la Chaire de recherche en Salubrité des Viandes (CRSV), la caractérisation d'anticorps IgY extraits de jaunes d'œufs frais a montré des niveaux de production d’anticorps différents selon le mode d’immunisation et suggère, in vitro, des effets sur ce pathogène. Ce qui laisse penser qu'en tant qu'additif alimentaire, une poudre de jaunes d'œuf potentialisée permettrait de lutter contre C. jejuni chez le poulet à griller. Dans ce travail, le processus de fabrication de l'additif (déshydratation par « Spray dry » puis encapsulation) a été évalué et les différents modes d'immunisation des poules pondeuses ont également été comparés. Les anticorps ont été extraits des différentes poudres de jaunes d'œuf ou du produit final encapsulé, et caractérisés in vitro (dosage / ELISA, test de mobilité, bactéricidie, western blot). Puis, une évaluation in vivo de la capacité de ces poudres encapsulées, incorporée à 5 % dans la moulée, afin de réduire ou de bloquer la colonisation intestinale des oiseaux par C. jejuni a été testée. In vitro, les résultats ont montré des concentrations d'anticorps et d'efficacité variables selon le type de vaccination. Dans cette étude, on a observé que le « Spray dry » a concentré les anticorps dans les poudres et que ces anticorps sont restés fonctionnels contre C. jejuni. On a également observé que l'encapsulation n’entraîne pas une perte quantitative des anticorps contenus dans les poudres. Malgré les résultats in vitro encourageants, les résultats in vivo ne révèlent aucune inhibition ou réduction de la colonisation des oiseaux par C. jejuni. L’absence d’efficacité la poudre de jaunes d’œuf encapsulée dans notre étude n’est pas due à une perte quantitative et/ou qualitative des anticorps comme soutenu dans les expériences in vitro. Ce qui démontre que les recherches doivent être poursuivies afin de déterminer les conditions optimales de l'utilisation de la poudre de jaune d'œuf in vivo, en tant qu'additif alimentaire chez les poulets

Social capital and natural hazards : trust and cohesion in the eastern visayas of the Philippines

Cette thèse porte sur le capital social et les mesures prises afin de se préparer aux aléas naturels aux Philippines. L’archipel est régulièrement soumis à de nombreux risques de catastrophe, générant parfois des conséquences désastreuses pour la population et le patrimoine économique du pays. Par ailleurs, ces îles portent un lourd héritage colonial rendant omniprésents les inégalités socioéconomiques, le manque de solidarité et la pauvreté. Le concept du capital social demeure encore très polémique, cependant nous croyons qu'il peut s'avérer utile afin de mieux réfléchir à la façon dont les sociétés humaines interagissent avec les aléas naturels. Nos recherches mettent en avant l’importance des inégalités socioéconomiques, du contexte et de l'échelle géographique dans l’analyse du capital social et de la préparation aux aléas. Elles soulignent d'autre part que la compréhension des dynamiques sociales, telles que la confiance et la participation communautaire, ne peut être atteinte sans une considération des contextes politiques. Nous avons porté une attention particulière à l'examen des contextes et des différentes formes de capital social, et ce, à plusieurs niveaux géographiques (village, municipalité, région, pays). Un nombre croissant d'études montre que l'inégalité économique entraîne des conséquences néfastes sur le capital social. Des recherches récentes ont également commencé à interroger les rapports entre le capital social et les catastrophes dites « naturelles ». Notre thèse établit un lien entre ces deux approches en couplant une analyse générale de la situation des Philippines à une étude approfondie d'une municipalité rurale isolée de la région des Visayas orientales. L'argument central de cette thèse est que l'inégalité économique produit des effets néfastes sur le capital social, entraînant des répercussions négatives sur la prévention des catastrophes « naturelles ». Par le biais de l'analyse de plusieurs échelles géographiques, cette thèse entend montrer comment les inégalités, de par leur impact sur le capital social, contribuent à augmenter les chances de voir les aléas naturels se constituer en désastres. Nous avançons qu'un usage circonspect du concept de capital social, prenant en compte les complexités politiques, historiques, et géographiques du contexte auquel il s'applique, a la capacité d'améliorer la manière dont les gens se préparent collectivement afin d'éviter que les aléas ne se transforment en catastrophes.

Fabrication and Characterization of Spray Pyrolysed Cadmium Sulphide Homojunction Solar Cells

The study on the fabrication and characterization of spray pyrolysed cadmium sulphide homojunction solar cells. As an alternative to the conventional energy source, the PV technology has to be improved. Study about the factors affecting the performance of the existing solar cells and this will result in the enhancement of efficiency of the cells. At the same time it is equally important to have R&D works on developing new photovoltaic devices and processes which are less expensive for large scale production. CdS is an important binary compound semiconductor, which is very useful in the field of photovoltaics. It is very easy to prepare large area CdS thin films. In order to fabricate thin film homojunction cadmium sulphide cells, prepared and characterized SnO2 thin film as the lower electrode, p-CdS as the active layer and n-CdS as window layer. Cadmium material used for the fabrication of homojunction solar cells is highly toxic. The major damage due to continued exposure to low levels of cadmium are on the kidneys, lungs and bones. The real advantage of spray pyrolysis process is that there is no emission of any toxic gases during the deposition. Very low concentration of the chemicals is needed in this process. The risk involved from this material is very low, though they are toxic. On large scale usage it may become necessary that the cells after their life, should be bought back by the companies to retrieve chemicals like cadmium. This will reduce environmental problem and also the material wastage

ANALYSIS, MODIFICATION, AND EVALUATION OF THE COLD FLOW PROPERTIES OF VEGETABLE OILS AS BASE OIL FOR INDUSTRIAL LUBRICANTS

Poor cold flow properties of vegetable oils are a major problem preventing the usage of many abundantly available vegetable oils as base stocks for industrial lubricants. The major objective of this research is to improve the cold flow properties of vegetable oils by various techniques like additive addition and different chemical modification processes. Conventional procedure for determining pour point is ASTM D97 method. ASTM D97 method is time consuming and reproducibility of pour point temperatures is poor between laboratories. Differential Scanning Calorimetry (DSC) is a fast, accurate and reproducible method to analyze the thermal activities during cooling/heating of oil. In this work coconut oil has been chosen as representative vegetable oil for the analysis and improvement cold flow properties since it is abundantly available in the tropics and has a very high pour point of 24 °C. DSC is used for the analysis of unmodified and modified vegetable oil. The modified oils (with acceptable pour points) were then subjected to different tests for the valuation of important lubricant properties such as viscometric, tribological (friction and wear properties), oxidative and corrosion properties.A commercial polymethacrylate based PPD was added in different percentages and the pour points were determined in each case. Styrenated phenol(SP) was added in different concentration to coconut oil and each solution was subjected to ASTM D97 test and analysis by DSC. Refined coconut oil and other oils like castor oil, sunflower oil and keranja oil were mixed in different proportions and interesterification procedure was carried out. Interesterification of coconut oil with other vegetable oils was not found to be effective in lowering the pour point of coconut oil as the reduction attained was only to the extent of 2 to 3 °C.Chemical modification by acid catalysed condensation reaction with coconut oil castor oil mixture resulted in significant reduction of pour point (from 24 ºC to -3 ºC). Instead of using triacylglycerols, when their fatty acid derivatives (lauric acid- the major fatty acid content of coconut oil and oleic acid- the major fatty acid constituents of monoand poly- unsaturated vegetable oils like olive oil, sunflower oil etc.) were used for the synthesis , the pour point could be brought down to -42 ºC. FTIR and NMR spectroscopy confirmed the ester structure of the product which is fundamental to the biodegradability of vegetable oils. The tribological performance of the synthesised product with a suitable AW/EP additive was comparable to the commercial SAE20W30 oil. The viscometric properties (viscosity and viscosity index) were also (with out additives) comparable to commercial lubricants. The TGA experiment confirmed the better oxidative performance of the product compared to vegetable oils. The sample passed corrosion test as per ASTM D130 method.

Internet Banking and Customer Acceptance: The Indian Scenario

Indian economy is witnessing stellar growth over the last few years. There have been rapid developments in infrastructural and business front during the growth period.Internet adoption among Indians has been increasing over the last one decade.Indian banks have also risen to the occasion by offering new channels of delivery to their customers.Internet banking is one such new channel which has become available to Indian customers.Customer acceptance for internet banking has been good so far.In this study the researcher tried to conduct a qualitative and quantitative investigation of internet banking customer acceptance among Indians. The researcher tried to identify important factors that affect customer's behavioral intention for internet banking .The researcher also proposes a research model which has extended from Technology Acceptance Model for predicting internet banking acceptance.The findings of the study would be useful for Indian banks in planning and upgrading their internet banking service.Banks could increase internet banking adoption by making their customer awareness about the usefulness of the service.It is seen that from the study that the variable perceived usefulness has a positive influence on internet banking use,therefore internet banking acceptance would increase when customers find it more usefulness.Banks should plan their marketing campaigns taking into consideration this factor.Proper marketing communications which would increase consumer awareness would result in better acceptance of internet banking.The variable perceived ease of use had a positive influence on internet banking use.That means customers would increase internet banking usage when they find it easier to use.Banks should therefore try to develop their internet banking site and interface easier to use.Banks could also consider providing practical training sessions for customers at their branches on usage of internet banking interface.

Studies on some supported transition metal complex and metal oxide catalysts for oxidation reactions

Zeolite encapsulated transition metal complexes have received wide attention as an effective heterogenized system that combines the tremendous activity of the metal complexes and the attractive features of the zeolite structure. Zeolite encapsulated complexes offer a bright future for attempts to replace homogeneous systems retaining its catalytic activity and minimizing the technical problems. especially for the partial oxidation of organic compounds. Studies on some zeolite encapsulated transition metal complexes are presented in this thesis. The ligands selected are technically important in a bio-mimetic or structural perspective. Attempts have been made in this study to investigate the composition, structure and stability of encapsulated complexes using available techniques. The catalytic activity of encapsulated complexes was evaluated for the oxidation of some organic compounds. The recycling ability of the catalyst as a result of the encapsulation was also studied.Our studies on Cu-Cr/Al2O3, a typical metal oxide catalyst. illustrate the use of design techniques to modify the properties of such conventional catalysts. The catalytic activity of this catalyst for the oxidation of carbon monoxide was measured. The effect of additives like Ce02 or Ti02 on the activity and stability of this system was also investigated. The additive is potent to improve the activity and stability ofthe catalyst so as to be more effective in commercial usage.

Studies on grain refinement and alloying additions on the microstructure and mechanical properties of Mg-8Zn-4Al alloy

MAGNESIUM ALLOYS have strong potential for weight reduction in a wide range of technical applications because of their low density compared to other structural metallic materials. Therefore, an extensive growth of magnesium alloys usage in the automobile sector is expected in the coming years to enhance the fuel efficiency through mass reduction. The drawback associated with the use of commercially cheaper Mg-Al based alloys, such as AZ91, AM60 and AM50 are their inferior creep properties above 100ºC due to the presence of discontinuous Mg17A112 phases at the grain boundaries. Although rare earth-based magnesium alloys show better mechanical properties, it is not economically viable to use these alloys in auto industries. Recently, many new Mg-Al based alloy systems have been developed for high temperature applications, which do not contain the Mg17Al12 phase. It has been proved that the addition of a high percentage of zinc (which depends upon the percentage of Al) to binary Mg-Al alloys also ensures the complete removal of the Mg17Al12 phase and hence exhibits superior high temperature properties.ZA84 alloy is one such system, which has 8%Zn in it (Mg-8Zn-4Al-0.2Mn, all are in wt %) and shows superior creep resistance compared to AZ and AM series alloys. These alloys are mostly used in die casting industries. However, there are certain large and heavy components, made up of this alloy by sand castings that show lower mechanical properties because of their coarse microstructure. Moreover, further improvement in their high temperature behaviour through microstructural modification is also an essential task to make this alloy suitable for the replacement of high strength aluminium alloys used in automobile industry. Grain refinement is an effective way to improve the tensile behaviour of engineering alloys. In fact, grain refinement of Mg-Al based alloys is well documented in literature. However, there is no grain refiner commercially available in the market for Mg-Al alloys. It is also reported in the literature that the microstructure of AZ91 alloy is modified through the minor elemental additions such as Sb, Si, Sr, Ca, etc., which enhance its high temperature properties because of the formation of new stable intermetallics. The same strategy can be used with the ZA84 alloy system to improve its high temperature properties further without sacrificing the other properties. The primary objective of the present research work, “Studies on grain refinement and alloying additions on the microstructure and mechanical properties of Mg-8Zn-4Al alloy” is twofold: 1. To investigate the role of individual and combined additions of Sb and Ca on the microstructure and mechanical properties of ZA84 alloy. 2. To synthesis a novel Mg-1wt%Al4C3 master alloy for grain refinement of ZA84 alloy and investigate its effects on mechanical properties.

Transition Metal Complexes of Schiff Bases with Azide and Thiocyanate as Coligands:Spectral and Structural Investigations

Metallo-organic chemistry,incorporating the frontiers of both inorganic and organic chemical aspects,is a topic of utility concern.The first exploration of coordinated metal complexes dates back to the ninettenth century,during the days of Alfred Werner.Thereafter,inorganic chemistry witnessed a great outflow of coordination compounds,with unique structural characteristics and diverse applicatons.The diversity in structures exhibited by the coordination complexes of multidentate ligands have led to their usage as sensors,models for enzyme mimetic centers,medicines etc.The liganda chosen are of prime importance in determining the properties of coordination compounds.Schiff bases are compounds obtained by the condensation of an aidehyde or ketone with an amine.The chemical properties of Schiff bases and their complexes are widely explored in recent years owing to their pharmacological activity,their catalytic activities and so on.On the other hand pseudohalides like azide and thiocyanate are versatile candidates for the construction of dimeric or polymeric complexes having excellent properties and diverse applications.So a combination of the Schiff bases and the pseudohalogens for the synthesis of metal complexes can bring about interesting results.An attempt into this area is the besis of this Ph.D theis.

Biochemical and molecular investigations on Salmonella serovars from seafood

The present investigation was envisaged to determine the prevalence and identify the different Salmonella serovar in seafood from Cochin area. Though, the distribution of Salmonella serovars in different seafood samples of Cochin has been well documented, the present attempt was made to identify the different Salmonella serovars and determine its prevalence in various seafoods. First pan of this investigation involved the isolation and identification of Salmonella strains with the help of different conventional culture methods. The identified isolates were used for the further investigation i.e. serotyping, this provides the information about the prevalent serovars in seafood. The prevalent Salmonella strains have been further characterized based on the utilization of different sugars and amino acids, to identify the different biovar of a serovar.A major research gap was observed in molecular characterization of Salmonella in seafood. Though, previous investigations reported the large number of Salmonella serovars from food sources in India, yet, very few work has been reported regarding genetic characterization of Salmonella serovars associated with food. Second part of this thesis deals with different molecular fingerprint profiles of the Salmonella serovars from seafood. Various molecular typing methods such as plasmid profiling, characterization of virulence genes, PFGE, PCR- ribotyping, and ERIC—PCR have been used for the genetic characterization of Salmonella serovars.The conventional culture methods are mainly used for the identification of Salmonella in seafood and most of the investigations from India and abroad showed the usage of culture method for detection of Salmonella in seafood. Hence, development of indigenous, rapid molecular method is most desirable for screening of Salmonella in large number of seafood samples at a shorter time period. Final part of this study attempted to develop alternative, rapid molecular detection method for the detection of Salmonella in seafood. Rapid eight—hour PCR assay has been developed for detection of Salmonella in seafood. The performance of three different methods viz., culture, ELISA and PCR assays were evaluated for detection of Salmonella in seafood and the results were statistically analyzed. Presence of Salmonella cells in food and enviromnental has been reported low in number, hence, more sensitive method for enumeration of Salmonella in food sample need to be developed. A quantitative realtime PCR has been developed for detection of Salmonella in seafood. This method would be useful for quantitative detection of Salmonella in seafood.

Influence of Si, Sb and Sr Additions on the Microstructure, Mechanical Properties and Corrosion Behavior of AZ91 Magnesium Alloy

All the exciting work on developing new and better alloys has led older alloys, such as AZ9l , being abandoned by researchers. lt is believed that the full potential of AZ9l in automotive design has not been realized. Whatever works have been carried out on AZ9lalloy to improve its mechanical properties are insufficient in terms of its potential usage in auto industries. Due to the fact that AZ91 offers high room temperature mechanical properties and good castability, still this alloy is a primary choice for the auto component manufactures. Small improvement in its creep properties will have a huge impact in the transportation industries. Hence, in the present work, “Influence of Si, Sb and Sr Additions on the Microstructure, Mechanical Properties and Corrosion Behavior of AZ91 Magnesium Alloy”, an attempt has been made to improve the creep properties of AZ9l alloy through minor alloying elemental additions and to understand its strengthening mechanisms. The effect of alloying additions on the ageing and tensile properties of AZ9l is also studied. In addition to that, role of various intermetallics formed due to the alloying additions on the corrosion properties of AZ9l alloy is investigated.

An Alternative Approach To Computer System Security Monitoring And Enhancement Through System Call Sequence Analysis

Modern computer systems are plagued with stability and security problems: applications lose data, web servers are hacked, and systems crash under heavy load. Many of these problems or anomalies arise from rare program behavior caused by attacks or errors. A substantial percentage of the web-based attacks are due to buffer overflows. Many methods have been devised to detect and prevent anomalous situations that arise from buffer overflows. The current state-of-art of anomaly detection systems is relatively primitive and mainly depend on static code checking to take care of buffer overflow attacks. For protection, Stack Guards and I-leap Guards are also used in wide varieties.This dissertation proposes an anomaly detection system, based on frequencies of system calls in the system call trace. System call traces represented as frequency sequences are profiled using sequence sets. A sequence set is identified by the starting sequence and frequencies of specific system calls. The deviations of the current input sequence from the corresponding normal profile in the frequency pattern of system calls is computed and expressed as an anomaly score. A simple Bayesian model is used for an accurate detection.Experimental results are reported which show that frequency of system calls represented using sequence sets, captures the normal behavior of programs under normal conditions of usage. This captured behavior allows the system to detect anomalies with a low rate of false positives. Data are presented which show that Bayesian Network on frequency variations responds effectively to induced buffer overflows. It can also help administrators to detect deviations in program flow introduced due to errors.