Automotive engineering

Mode of access: Internet.

Midwest vegetable production guide '98 for commercial growers.

Cover title.

Sleepiness, sleep-disordered breathing, and accident risk factors in commercial vehicle drivers

Sleep-disordered breathing and excessive sleepiness may be more common in commercial vehicle drivers than in the general population. The relative importance of factors causing excessive sleepiness and accidents in this population remains unclear. We measured the prevalence of excessive sleepiness and sleep-disordered breathing and assessed accident risk factors in 2,342 respondents to a questionnaire distributed to a random sample of 3,268 Australian commercial vehicle drivers and another 161 drivers among 244 invited to undergo polysomnography. More than half (59.6%) of drivers had sleep-disordered breathing and 15.8% had obstructive sleep apnea syndrome. Twenty-four percent of drivers had excessive sleepiness. Increasing sleepiness was related to an increased accident risk. The sleepiest 5% of drivers on the Epworth Sleepiness Scale and Functional Outcomes of Sleep Questionnaire had an in-creased risk of an accident (odds ratio [OR] 1.91, p = 0.02 and OR 2.23, p < 0.01, respectively) and multiple accidents (OR 2.67, p < 0.01 and OR 2.39, p = 0.01), adjusted for established risk factors. There was an increased accident risk with narcotic analgesic use (OR 2.40, p < 0.01) and antihistamine use (OR 3.44, p = 0.04). Chronic excessive sleepiness and sleep-disordered breathing are common in Australian commercial vehicle drivers. Accident risk was related to increasing chronic sleepiness and antihistamine and narcotic analgesic use.

Tyre-force estimation by Kalman inverse filtering: applications to off-highway mining trucks

Kalman inverse filtering is used to develop a methodology for real-time estimation of forces acting at the interface between tyre and road on large off-highway mining trucks. The system model formulated is capable of estimating the three components of tyre-force at each wheel of the truck using a practical set of measurements and inputs. Good tracking is obtained by the estimated tyre-forces when compared with those simulated by an ADAMS virtual-truck model. A sensitivity analysis determines the susceptibility of the tyre-force estimates to uncertainties in the truck's parameters.

Outside in-group and out-group identities? Constructing male solidarity and female exclusion in UK builders’ talk

This article examines the spoken interactions of a group of British construction workers to discover whether it is possible to identify a distinctive ‘builders’ discourse’. Given that builders work for a mostly all-male profession (Curjao, 2006), we ask whether the ways in which male builders converse with each other while ‘on the job’ can be held in any way responsible for the under-representation of women within this major occupational sector in the UK. This article reports on a case study of the conversations of three white, working-class, male builders, which took place while travelling in a truck between different building sites. This forms part of a larger ethnographic study of builders’ discourse in different work locations. The analysis shows that male builders are highly collaborative in constructing narratives of in-group and out-group identities (Duszak, 2002; Tajfel, 1978). Various other male groups are demonized in these conversations: Polish immigrant builders, rude clients and rival builders. However, there is almost no reference to women. The article concludes that women are viewed as so unthreatening to male ascendancy in the building industry that they do not even feature within the ‘out-group’.

The autonomous navigation of an electric vehicle

A navigation and positioning system for an electric automatic guided vehicle has been designed and implemented on an industrial pallet truck. The system includes an optical sensor mounted on the vehicle, capable of recognizing special markers at a distance of 0.3m. Software implemented in a z-80 microprocessor controls the sensor, performs all data processing and contains the decision making processes necessary for the vehicle to navigate its way to its task location. A second microprocessor is used to control the vehicle's drive motors under instruction from the navigation unit, to accurately position the vehicle at its destination. The sensor reliably recognises markers at vehicle speeds up to 1ms- 1, and the system has been integrated into a multiprocessor controlled wire-guidance system and applied to a prototype vehicle.

Analysis of transport costs for energy crops for use in biomass pyrolysis plant networks

Fast pyrolysis of biomass produces a liquid bio-oil that can be used for electricity generation. Bio-oil can be stored and transported so it is possible to decouple the pyrolysis process from the generation process. This allows each process to be separately optimised. It is necessary to have an understanding of the transport costs involved in order to carry out techno-economic assessments of combinations of remote pyrolysis plants and generation plants. Published fixed and variable costs for freight haulage have been used to calculate the transport cost for trucks running between field stores and a pyrolysis plant. It was found that the key parameter for estimating these costs was the number of round trips a day a truck could make rather than the distance covered. This zone costing approach was used to estimate the transport costs for a range of pyrolysis plants size for willow woodchips and baled miscanthus. The possibility of saving transport costs by producing bio-oil near to the field stores and transporting the bio-oil to a central plant was investigated and it was found that this would only be cost effective for large generation plants.

„Mennyit ér” a fenntarthatóság? – Esettanulmány az externális hatások mérésére azok internalizálására (What is sustainability worth? – A case study of measuring and internalizing negative environmental effects of logistics operation)

A fenntarthatóság központi kérdés a gazdálkodástudományban, ezen belül a logisztikában, hiszen a környezetre rótt szennyezésben e vállalati működési területnek is jelentős a szerepe. A szerzők dolgozata egy konkrét hazai esettanulmány segítségével vizsgálja a kérdéskört. Azt elemzik, vajon egy, az Európai Unióban is új kamiontípus (az ún. EuroCombi) alkalmazása a logisztikai folyamatokban milyen externális hatásokkal jár. Elemzésükben kísérletet tesznek ezeknek az externális hatásoknak a pénzben kifejezett mérésére. Azért fontos mindez, mert e mérés és számszerűsítés nélkül lehetetlen ezeknek a hatásoknak az internalizálása, vagyis belsővé tétele. Így mérés nélkül sem az érintett vállalatok tulajdonosai, sem azok belső döntéshozói, de a külső szabályozó szereplők sem tudják bevonni e hatásokat gazdasági döntéseikbe. Ez a mérés nem egyszerű feladat, de nem is lehetetlen. Mindenképpen alapját, előfeltételét képezi azonban annak, hogy ilyen jellegű döntéseknél az érintettek a társadalmi, környezeti érdekeket is érvényesíteni tudják. ____ Sustainability is a key issue today both for practitioners and researchers. This is true especially for logisticians. Logistics is a function that has a significant CO2 emission and also destructs transportation infrastructure that burden our environment. The article is focusing on these issues with the help of a Hungarian case study. It analysis the effect of applying a new, long and heavy type of truck, called EuroCombi. It presents a methodology usable for measuring these negative external effects in Forint. Without proper measurement internalization of costs these externalities generate is impossible. As it will be presented in details, such a measurement is although not very easy but achievable.

Dynamic Behavior and Fatigue Life of Highway Bridges Due to Doubling Heavy Vehicles

An increase in the demand for the freight shipping in the United States has been predicted for the near future and Longer Combination Vehicles (LCVs), which can carry more loads in each trip, seem like a good solution for the problem. Currently, utilizing LCVs is not permitted in most states of the US and little research has been conducted on the effects of these heavy vehicles on the roads and bridges. In this research, efforts are made to study these effects by comparing the dynamic and fatigue effects of LCVs with more common trucks. Ten Steel and prestressed concrete bridges with span lengths ranging from 30’ to 140’ are designed and modeled using the grid system in MATLAB. Additionally, three more real bridges including two single span simply supported steel bridges and a three span continuous steel bridge are modeled using the same MATLAB code. The equations of motion of three LCVs as well as eight other trucks are derived and these vehicles are subjected to different road surface conditions and bumps on the roads and the designed and real bridges. By forming the bridge equations of motion using the mass, stiffness and damping matrices and considering the interaction between the truck and the bridge, the differential equations are solved using the ODE solver in MATLAB and the results of the forces in tires as well as the deflections and moments in the bridge members are obtained. The results of this study show that for most of the bridges, LCVs result in the smallest values of Dynamic Amplification Factor (DAF) whereas the Single Unit Trucks cause the highest values of DAF when traveling on the bridges. Also in most cases, the values of DAF are observed to be smaller than the 33% threshold suggested by the design code. Additionally, fatigue analysis of the bridges in this study confirms that by replacing the current truck traffic with higher capacity LCVs, in most cases, the remaining fatigue life of the bridge is only slightly decreased which means that taking advantage of these larger vehicles can be a viable option for decision makers.

Castles in the air: the life, times and influence of the Reverend Moses Harvey (1820-1901).

The period from 1874 to 1901 was a time of significant transition in the economic and political life of Newfoundland. Twenty years into responsible government and with Confederation on the backburner, the colony’s politicians turned their attention to economic diversification, landward development and carving out the island’s place in the British Empire. The period saw both economic prosperity and retrenchment; the construction of a trans-insular railway; the adoption of policies to foster agriculture, forestry, manufacturing and mining; and diplomatic efforts to resolve France’s outstanding claims on the northwest coast of the island. At the same time, the government made an attempt to intervene directly in its primary industry, the fisheries. It created a Fisheries Commission in 1889 that recommended conservation measures and artificial propagation as ways to restore the health of some of the island’s fish stocks. They also proposed new methods of curing, packaging and marketing Newfoundland’s cod, as well as a complete overhaul of the truck system. A major player in both the public and private debates surrounding all of these subjects was the Reverend Moses Harvey. Along with being minister of the Free Church of Scotland in St. John’s, Harvey was one of Newfoundland’s most active promoters in the late nineteenth century. He served as the media mouthpiece for both Prime Minister William Whiteway and Prime Minister Robert Thorburn; editing the Evening Mercury – the official organ of the Liberal Party and then the Reform Party – from 1882 to 1883 and 1885 until 1890. As well, Harvey wrote regular columns on Newfoundland issues for newspapers in London, New York, Boston, Montreal, Toronto, and Halifax. He also produced numerous books, articles, encyclopedia entries, and travel guides outlining the island’s attractions and its vast economic potential. In short, Harvey made a significant contribution in shaping the way residents and the outside world viewed Newfoundland during this period. This thesis examines late nineteenth-century Newfoundland through the writing of Moses Harvey. The biographical approach offers a fuller, more nuanced account of some of the major historical themes of the period including the politics of progress, opening up the interior, railway construction and attitudes toward the fisheries. It also provides an insider’s prospective on what led to some of the major political decisions, policy positions or compromises taken by the Whiteway and Thorburn governments. Finally, a more detailed review of Harvey’s work exposes the practical and political differences that he had with people like D.W. Prowse and Bishop Michael Howley. While these so-called “boomers” in Newfoundland’s historiography agreed on broad themes, they parted ways over what should be done with the fisheries and how best to channel the colony’s growing sense of nationalism.

Colorado's Piceance Basin: Variation in the local public finance effects of oil and gas development

A large increase in natural gas production occurred in western Colorado’s Piceance basin in the mid- to late-2000s, generating a surge in population, economic activity, and heavy truck traffic in this rural region. We describe the fiscal effects related to this development for two county governments: Garfield and Rio Blanco, and two city governments: Grand Junction and Rifle. Counties maintain rural road networks in Colorado, and Garfield County’s ability to fashion agreements with operators to repair roads damaged during operations helped prevent the types of large new costs seen in Rio Blanco County, a neighboring county with less government capacity and where such agreements were not made. Rifle and Grand Junction experienced substantial oil- and gas-driven population growth, with greater challenges in the smaller, more isolated, and less economically diverse city of Rifle. Lessons from this case study include the value of crafting road maintenance agreements, fiscal risks for small and geographically isolated communities experiencing rapid population growth, challenges associated with limited infrastructure, and the desirability of flexibility in the allocation of oil- and gas-related revenue.

Local fiscal effects of oil and gas development in eight states

Oil and gas production in the United States has increased dramatically in the past 10 years. This growth has important implications for local governments, which often see new revenues from a variety of sources: property taxes on oil and gas property, sales taxes driven by the oil and gas workforce, allocations of state revenues from severance taxes or state and federal leases, leases on local government land, and contributions from oil and gas companies to support local services. At the same time, local governments tend to experience a range of new costs such as road damage caused by heavy industry truck traffic, increased demand for emergency services and law enforcement, and challenges with workforce retention. This report examines county and municipal fiscal effects in 14 oil- and gas-producing regions of eight states: AK, CA, KS, OH, OK, NM, UT, and WV. We find that for most local governments, oil and gas development—whether new or longstanding—has a positive effect on local public finances. However, effects can vary substantially due to a variety of local factors and policy issues. For some local governments, particularly those in rural regions experiencing large increases in development, revenues have not kept pace with rapidly increased costs and demand for services, particularly on road repair.

Untersuchungen Gewichtsreduktionspotentiale Gegengewichtsgabelstapler

Die Masse eines Gegengewichtstaplers beeinflusst den Energieverbrauch beim Fahren maßgeblich. Steigende Energiepreise und steigendes Umweltbewusstsein führen zu grünen Trends in Logistik. Durch Reduktion der Gesamtmasse eines Gabelstaplers können große Einsparungen erreicht werden. Eine Machbarkeitsstudie soll mithilfe der numerischen Simulationen zeigen, dass neuartige Fahrzeuge mit aktiven Systemen trotz geringerer Masse hinreichend hohe Standsicherheit aufweisen können. In diesem Beitrag sollen die ersten Ergebnisse dieses Forschungsvorhabens vorgestellt werden.

Modulares Prognosemodell für den einsatzspezifischen Energieverbrauch von Gabelstaplern

Flurförderzeuge leisten einen wesentlichen Beitrag zu den Treibhausgasemissionen in der EU. Aktuell wird ihr Verbrauch in Deutschland in der Regel per VDI-Zyklus prognostiziert. Dieser hat allerdings keinen Bezug zu dem tatsächlichen Nutzungsprofil eines konkreten Flurförderzeugs. Es soll untersucht werden, inwiefern ein modularer Aufbau, der sich einsatzspezifisch anpassen lässt, eine verbesserte Prognose der Verbräuche ermöglicht. Zudem soll analysiert werden, wie viel Mehraufwand diese verbesserte Möglichkeit der Vorhersage für die Hersteller bzw. die Nutzer bedeutet. Am MTL ist ein Messsystem aufgebaut worden, welches neben dem Energieverbrauch auch die Einflussparameter aufnimmt. Es werden exemplarische Messungen vorgestellt.

Integrierte drahtlose Sensorsysteme für Flurförderzeugreifen

In diesem Artikel werden zwei unterschiedliche Integrations- und Sensorkonzepte zur drahtlosen Erfassung der Belastung und Temperatur innerhalb eines Vollgummireifens für Flurförderzeuge beschrieben. Anhand der während des Fahrzeugbetriebs gesammelten Messdaten sollen Reifenschäden durch thermische Überlastung und Unfälle durch kippende Fahrzeuge vermieden werden.