Reformas de um projeto gráfico: uma análise da coleção do Sítio do Picapau Amarelo em três tempos

Este trabalho busca compreender as atuais configurações dos livros infantojuvenis no mercado editorial, com a entrada na chamada era digital e o aumento crescente na produção de e-books por parte das editoras, ao mesmo tempo em que livros impressos ainda continuam sendo produzidos em larga escala e reinventados constantemente. Partindo do conceito de remediação (BOLTER e GRUSIN, 2000), procura-se descobrir por quais mudanças os livros impressos passaram ao longo dos anos, quais são suas novas configurações gráficas face à atual realidade digital, e com quais critérios esses livros estão sendo transformados em e-books. Para tal, foi feito um estudo de caso dos livros infantojuvenis de Monteiro Lobato, importante autor para a literatura brasileira, com uma análise comparativa da coleção do Sítio do Picapau Amarelo, em quatro edições (três impressas e uma digital) e três épocas diferentes (anos 1940, 1980 e 2000). Focando na parte gráfica e estética dos livros (que foi a parte que se alterou) e com a observação dos protocolos de leitura (CHARTIER, 2011) presentes nas diferentes edições, procura-se compreender as transformações pelas quais esses livros passaram ao longo dos anos, em decorrência do contexto sociocultural em que foram produzidos, além de suas atuais configurações no contexto da cultura da convergência (JENKINS, 2009). Após a análise realizada pôde-se perceber que talvez o processo de remediação no mercado editorial ainda não esteja tão presente quanto se pensava inicialmente, apesar de estar caminhando lentamente nessa direção.

Políticas sociais e direito à saúde: contribuições teóricas para a análise desta relação

A presente dissertação busca realizar a descrição e sistematização de categorias analíticas que contribuam com análises sobre as relações econômicas, políticas e sociais que sustentam a forma como se constituem historicamente no Brasil o Estado e as políticas públicas na área social, com especial atenção para a área de saúde. Tal objetivo se constituiu na observação das novas estratégias utilizadas pelo Estado para a execução de ações na área de saúde, como os projetos sociais. Tomamos o método do materialismo histórico dialético como referencial teórico, com especial atenção às categorias da filosofia da práxis práxis, totalidade, historicidade e contradição e a teoria marxista sobre a formação do Estado capitalista e suas transformações históricas, com ênfase na teoria sobre o Estado ampliado e o papel da sociedade civil na disputa entre as classes pela hegemonia. No segundo capítulo, abordamos a organização contemporânea do Estado brasileiro, buscando discutir escolhas políticas e econômicas, suas implicações para a organização dos trabalhadores e para a correlação de forças na disputa entre as classes. Foi feito breve levantamento histórico sobre os modelos de desenvolvimento econômico e social nas sociedades contemporâneas, com atenção à consolidação do ideário neoliberal, sua conceituação, as adequações que sofreu a partir do final dos anos 1990 e sua relação com a ideologia desenvolvimentista. Dedicamos o terceiro capítulo ao conceito de capital social, como maneira de compreender a atual forma de desenvolvimento das políticas públicas e em especial as políticas de saúde. A partir deste conceito buscou-se compreender a relação entre Estado e sociedade civil na atualidade e como este influencia as transformações por que passaram o Estado e as políticas sociais. Abordou-se o desenvolvimento das políticas públicas da área social no Estado brasileiro até sua conformação no neoliberalismo; as concepções de saúde em disputa na sociedade brasileira, focando no conceito ampliado de saúde e no de determinação social da saúde; e de que forma estes conceitos são impactados pelas mudanças no contexto do neoliberalismo. Finalmente, foi possível observar como as orientações neoliberais alteraram significativamente a forma de organização e atuação do Estado, a concepção e aplicação de políticas públicas, bem como as políticas de saúde e seu ideário. Mudanças que fizeram pender a atuação do Estado ainda mais a favor dos interesses do capital.

A regularização fundiária e o registro de imóveis

Este trabalho tem por finalidade apresentar um estudo sobre as contribuições do serviço de registro imobiliário, com destaque em procedimentos de regularização fundiária de imóveis urbanos. Não raras vezes, empreendedores, administradores públicos, juízes, sociedade deparam-se com situações em que há a necessidade de titulação da terra como mecanismo de formalização da propriedade, oportunidade em que são exigidos os requisitos estabelecidos na legislação de regência. A adoção em caráter estrito das regras estabelecidas, em contraposição às peculiaridades e ao desregramento de assentamentos informais, importaria em eterna manutenção dos mesmos à margem da lei. Há, assim, de se criar mecanismos de consenso e soluções de compromisso, em que poder público, registrador imobiliário, operadores do direito e a própria comunidade envolvam-se no sentido de colmatar uma solução intermediária. Solução esta que, sem perder a necessária segurança jurídica dos registros públicos, possibilite a adoção de mecanismos que facilitem o acesso dos ocupantes à titulação da terra em que vivem. O título de propriedade representa mais do que mero papel. Traduz o poder de direito sobre determinado terreno, alçando-o da condição de um capital morto para elemento ativo em um mercado cada dia mais globalizado. Nesta esteira, arregimenta economicamente não apenas a população diretamente envolvida, quanto também possibilita, através da inserção dos imóveis regularizados no mercado, um aproveitamento e um incremento econômico catalisador de transformações econômico-sociais. Novos direitos, novos bens em garantia, novas condições de crédito, renovada segurança jurídica, enfim, novas oportunidades são desdobradas aos detentores, que agora podem investir sem o receio da precariedade decorrente de mera situação de posse. Estuda-se, assim, neste trabalho a importante atuação do registrador imobiliário e as vantagens decorrentes do processo de regularização fundiária, como um processo a ser estimulado e incrementado, concretizador de cidadania e efetivador dos direitos fundamentais de propriedade (art 5 CF/88) e de moradia (art. 6 da CF/88).

Representations of uncertainty in sensorimotor control.

Uncertainty is ubiquitous in our sensorimotor interactions, arising from factors such as sensory and motor noise and ambiguity about the environment. Setting it apart from previous theories, a quintessential property of the Bayesian framework for making inference about the state of world so as to select actions, is the requirement to represent the uncertainty associated with inferences in the form of probability distributions. In the context of sensorimotor control and learning, the Bayesian framework suggests that to respond optimally to environmental stimuli the central nervous system needs to construct estimates of the sensorimotor transformations, in the form of internal models, as well as represent the structure of the uncertainty in the inputs, outputs and in the transformations themselves. Here we review Bayesian inference and learning models that have been successful in demonstrating the sensitivity of the sensorimotor system to different forms of uncertainty as well as recent studies aimed at characterizing the representation of the uncertainty at different computational levels.

Inferring visuomotor priors for sensorimotor learning.

Sensorimotor learning has been shown to depend on both prior expectations and sensory evidence in a way that is consistent with Bayesian integration. Thus, prior beliefs play a key role during the learning process, especially when only ambiguous sensory information is available. Here we develop a novel technique to estimate the covariance structure of the prior over visuomotor transformations--the mapping between actual and visual location of the hand--during a learning task. Subjects performed reaching movements under multiple visuomotor transformations in which they received visual feedback of their hand position only at the end of the movement. After experiencing a particular transformation for one reach, subjects have insufficient information to determine the exact transformation, and so their second reach reflects a combination of their prior over visuomotor transformations and the sensory evidence from the first reach. We developed a Bayesian observer model in order to infer the covariance structure of the subjects' prior, which was found to give high probability to parameter settings consistent with visuomotor rotations. Therefore, although the set of visuomotor transformations experienced had little structure, the subjects had a strong tendency to interpret ambiguous sensory evidence as arising from rotation-like transformations. We then exposed the same subjects to a highly-structured set of visuomotor transformations, designed to be very different from the set of visuomotor rotations. During this exposure the prior was found to have changed significantly to have a covariance structure that no longer favored rotation-like transformations. In summary, we have developed a technique which can estimate the full covariance structure of a prior in a sensorimotor task and have shown that the prior over visuomotor transformations favor a rotation-like structure. Moreover, through experience of a novel task structure, participants can appropriately alter the covariance structure of their prior.

La reproducción de la merluza en el Mar Argentino (Merlucciidae, Meluccius merluccius hubbsi) : 1. Descripción histológica del ciclo del ovario de merluza

The present paper deals on the histological description of the hake ovary made on the basis of gonad observations of 394 females during the period April 1966 March 1967. The material was obtained from weekly sampling of commercial catches carried out at the Institute of Marine Biology (Prov. Buenos Aires, Argentina). The anatomical and histological description of the standard ovary and the adopted terminology are given. The maturation process is divided into five periods, from ovocyte formation to yolked ovocyte formation, with its histological description. Ovary changes are analyzed on detail. The following conclusions were outlined: 1. Analysis demonstrated that although some specimens were totally spawned others, at the end of the spawning period, retaining a great number of ovocytes in different maturity stages. Therefore, postspawners have been classified as follows: Postspawned II : This stages is characterized by the empty ovarian structure, with ovocytes in stage II, which will remain in the resting phase untill next spawning season. Postspawned III and IV: Their main characteristics are: tissue destruction, bloody residuals and remaining ovocytes in stage III and IV, respectively. 2. Some transformations were found in ovaries of postspawned III and IV. They are classified as follows, according to its origin and structure: Developed from follicular cell membrane – a) Glandular formations, b) Epiteloid formations - Originated from remaining ovocytes, c) Ovocyte disintegration, d) Ovocyte with follicular cell infiltration. 3. All those structures derived from postpawners III and IV have a temporary character and will be reabsorbed. Their presence delay the recuperation of the organ and its reproductive functions. Consequently, the possibility of those structures acting as control mechanisms is suggested. 4. Transformations pointed out in paragraph Nº 2 prevent the possibility of consecutive spawning originated from the remaining ovocytes (II and IV). 5. No structures originated from postspawners III and IV were found during summer season. 6. Reproductive cycle of hake has been described monthly. It was observed that maturing ovaries predominate in summer (November-December).

Derivation of a vector model for a Brushless Doubly-Fed Machine with multiple loops per nest

The paper presents a vector model for a Brushless Doubly-Fed Machine (BDFM). The BDFM has 4 and 8 pole stator windings and a nested-loop rotor cage. The rotor cage has six nests equally spaced around the circumference and each nest comprises three loops. All the rotor loops are short circuited via a common end-ring at one end. The vector model is derived based on the electrical equations of the machine and appropriate vector transformations. In contrast to the stator, there is no three phase circuit in the rotor. Therefore, the vector transformations suitable for three phase circuits can not be utilised for the rotor circuit. A new vector transformation is employed for the rotor circuit quantities. The approach presented in this paper can be extended for a BDFM with any stator poles combination and any number of loops per nest. Simulation results from the model implemented in Simulink are presented. © 2008 IEEE.

A variational perspective on noise-robust speech recognition

Model compensation methods for noise-robust speech recognition have shown good performance. Predictive linear transformations can approximate these methods to balance computational complexity and compensation accuracy. This paper examines both of these approaches from a variational perspective. Using a matched-pair approximation at the component level yields a number of standard forms of model compensation and predictive linear transformations. However, a tighter bound can be obtained by using variational approximations at the state level. Both model-based and predictive linear transform schemes can be implemented in this framework. Preliminary results show that the tighter bound obtained from the state-level variational approach can yield improved performance over standard schemes. © 2011 IEEE.

The use of energy in China: Tracing the flow of energy from primary source to demand drivers

We present a map of the transformation of energy in China as a Sankey diagram. After a review of previous work, and a statement of methodology, our main work has been the identification, evaluation, and treatment of appropriate data sources. This data is used to construct the Sankey diagram, in which flows of energy are traced from energy sources through end-use conversion devices, passive systems and final services to demand drivers. The resulting diagram provides a convenient and clear snapshot of existing energy transformations in China which can usefully be compared with a similar global analysis and which emphasises the potential for improvements in energy efficiency in 'passive systems'. More broadly, it gives a basis for examining and communicating future energy scenarios, including changes to demand, changes to the supply mix, changes in efficiency and alternative provision of existing services. © 2012 Elsevier Ltd.

Managing water resources and their connection to land and energy

Effective management is a key to ensuring the current and future sustainability of land, water and energy resources. Identifying the complexities of such management is not an easy task, especially since past studies have focussed on studying these resources in isolation from one another. However, with rapid population growth and an increase in the awareness of a potential change in climatic conditions that may affect the demand for and supply of food, water and energy, there has been a growing need to integrate the planning decisions relating to these three resources. The paper shows the visualisation of linked resources by drawing a set of interconnected Sankey diagrams for energy, water and land. These track the changes from basic resource (e.g. coal, surface water, groundwater and cropland) through transformations (e.g. fuel refining and desalination) to final services (e.g. sustenance, hygiene and transportation). The focus here is on the water analysis aspects of the tool, which uses California as a detailed case study. The movement of water in California is traced from its source to its services by mapping the different transformations of water from when it becomes available, through its use, to further treatment, to final sinks (including recycling and reuse of that resource). The connections that water has with energy and land resources for the state of California are highlighted. This includes the amount of energy used to pump and treat water, and the amount of water used for energy production and the land resources which create a water demand to produce crops for food. By mapping water in this way, policy-makers and resource managers can more easily understand the competing uses of water (environment, agriculture and urban use) through the identification of the services it delivers (e.g. sanitation, agriculture, landscaping), the potential opportunities for improving the management of the resource (e.g. building new desalination plants, reducing the demand for services), and the connections with other resources which are often overlooked in a traditional sector-based management strategy.

Polarisation diversity of conformal arrays based on geometric algebra via convex optimisation

A simple and general design procedure is presented for the polarisation diversity of arbitrary conformal arrays; this procedure is based on the mathematical framework of geometric algebra and can be solved optimally using convex optimisation. Aside from being simpler and more direct than other derivations in the literature, this derivation is also entirely general in that it expresses the transformations in terms of rotors in geometric algebra which can easily be formulated for any arbitrary conformal array geometry. Convex optimisation has a number of advantages; solvers are widespread and freely available, the process generally requires a small number of iterations and a wide variety of constraints can be readily incorporated. The study outlines a two-step approach for addressing polarisation diversity in arbitrary conformal arrays: first, the authors obtain the array polarisation patterns using geometric algebra and secondly use a convex optimisation approach to find the optimal weights for the polarisation diversity problem. The versatility of this approach is illustrated via simulations of a 7×10 cylindrical conformal array. © 2012 The Institution of Engineering and Technology.

Scale-invariant vote-based 3D recognition and registration from point clouds

This chapter presents a method for vote-based 3D shape recognition and registration, in particular using mean shift on 3D pose votes in the space of direct similarity transformations for the first time. We introduce a new distance between poses in this spacethe SRT distance. It is left-invariant, unlike Euclidean distance, and has a unique, closed-form mean, in contrast to Riemannian distance, so is fast to compute. We demonstrate improved performance over the state of the art in both recognition and registration on a (real and) challenging dataset, by comparing our distance with others in a mean shift framework, as well as with the commonly used Hough voting approach. © 2013 Springer-Verlag Berlin Heidelberg.

A high-resolution atlas and statistical model of the human heart from multislice CT

Atlases and statistical models play important roles in the personalization and simulation of cardiac physiology. For the study of the heart, however, the construction of comprehensive atlases and spatio-temporal models is faced with a number of challenges, in particular the need to handle large and highly variable image datasets, the multi-region nature of the heart, and the presence of complex as well as small cardiovascular structures. In this paper, we present a detailed atlas and spatio-temporal statistical model of the human heart based on a large population of 3D+time multi-slice computed tomography sequences, and the framework for its construction. It uses spatial normalization based on nonrigid image registration to synthesize a population mean image and establish the spatial relationships between the mean and the subjects in the population. Temporal image registration is then applied to resolve each subject-specific cardiac motion and the resulting transformations are used to warp a surface mesh representation of the atlas to fit the images of the remaining cardiac phases in each subject. Subsequently, we demonstrate the construction of a spatio-temporal statistical model of shape such that the inter-subject and dynamic sources of variation are suitably separated. The framework is applied to a 3D+time data set of 138 subjects. The data is drawn from a variety of pathologies, which benefits its generalization to new subjects and physiological studies. The obtained level of detail and the extendability of the atlas present an advantage over most cardiac models published previously. © 1982-2012 IEEE.

Programmable transformation of vertically aligned carbon nanotubes into 3D microstructures

Capillary forming of carbon nanotubes (CNTs) enables the fabrication of unique 3D microstructures over large areas. In this paper we focus on the simulation as well as on the integration of these structures in MEMS devices. We developed finite element models (FEM) that enables qualitative prediction of shape transformations caused by capillary forming; and show how capillary formed CNT structured can be integrated with conventional lithographic processing for patterning of polymers and metals in concert with CNTs. © 2011 IEEE.

Visualising a stochastic model of California Water Resources Using Sankey Diagrams

This paper describes a novel approach to the analysis of supply and demand of water in California. A stochastic model is developed to assess the future supply of and demand for water resources in California. The results are presented in the form of a Sankey diagram where present and stochastically-varying future fluxes of water in California and its sub-regions are traced from source to services by mapping the various transformations of water from when it is first made available for use, through its treatment, recycling and reuse, to its eventual loss in a variety of sinks. This helps to highlight the connections of water with energy and land resources, including the amount of energy used to pump and treat water, the amount of water used for energy production, and the land resources that create a water demand to produce crops for food. By mapping water in this way, policy-makers can more easily understand the competing uses of water, through the identification of the services it delivers (e.g. sanitation, food production, landscaping), the potential opportunities for improving themanagement of the resource and the connections with other resources which are often overlooked in a traditional sector-based management strategy. This paper focuses on a Sankey diagram for water, but the ultimate aim is the visualisation of linked resource futures through inter-connected Sankey diagrams for energy, land and water, tracking changes from the basic resources for all three, their transformations, and the final services they provide.