A outra face dos modelos: técnicas de visualização para explorar modelos

Os modelos são tradicionalmente utilizados na engenharia de software para documentar aspetos do desenho e, em alguns casos, como base para a geração de parte ou a totalidade dos sistemas informáticos que descrevem. Embora subsista o debate sobre este tipo de abordagens e sobre o papel e qualidades que os modelos devem possuir nesta área de engenharia, a existência de modelos que estejam em conformidade com linguagens de modelação bem definidas permite outro tipo de utilizações que vão além das anteriormente referidas. Assente no conhecimento existente sobre a visualização de dados, nesta dissertação irá ser demonstrado a utilização de técnicas de visualização que permitem extrair informação sobre os modelos numa perspetiva inovadora e que contribui favoravelmente para uma melhor compreensão, análise e validação dos mesmos.

Detecção de bactérias no ar em ambiente hospitalar com recurso a técnicas moleculares

A Qualidade do Ar Interior (QAI) revela-se de grande importância no ambiente hospitalar devido à disseminação aérea de bactérias potenciar as infecções nosocomiais. Os estudos nesta temática são raros em Portugal e inexistentes na Madeira. Este trabalho tem como objectivos identificar com elevada precisão a flora bacteriana aerosolizada no Hospital Dr. João de Almada (HJA) utilizando técnicas moleculares, determinar a sua origem, disseminação e especificidades e analisar globalmente a QAI. O ar exterior e de 15 locais no interior do HJA foi amostrado em Abril de 2009. Foram medidas a temperatura, humidade e concentração de CO2 e NO2 e quantificadas as bactérias e fungos no ar. Utilizaram-se testes bioquímicos e técnicas moleculares para caracterização e identificação de bactérias e foram comparadas comunidades bacterianas. A biodiversidade bacteriana no ar interior do HJA é dominada pelo género Staphylococcus (68%), sendo as espécies mais frequentes S. cohnii urealyticus, S. haemolyticus, S. capitis ou S. caprae e Micrococcus luteus. A maioria das espécies encontradas é comum em ambiente hospitalar e na flora comensal humana. As Staphylococcus spp. detectadas são consideradas patogénicas oportunistas envolvidas em infecções nosocomiais. A QAI é conforme com a legislação na maioria dos locais, havendo microorganismos em excesso em 12 das 72 amostras. O excesso de fungos relacionou-se com eventos de bruma no exterior e o excesso de bactérias correlacionou-se com a actividade humana e foi potenciado pela fraca ventilação e a presença ou manipulação de materiais contaminados. O ar exterior tem boa qualidade para ventilação do HJA, excepto durante eventos de bruma. As comunidades bacterianas aerosolizadas têm maior similaridade entre locais do mesmo tipo, sendo os ocupantes o principal foco de contaminação. São propostas medidas correctivas como o aumento da ventilação dos locais com elevada actividade humana e cuidados na manipulação de roupa suja e resíduos.

Caminhos que estruturam cidades: redes técnicas de transporte sobre trilhos e a conformação intra-urbana de Natal

The railroad, from 1870 and on, becomes an usual complaining in the press s and politician elite s speeches, especially because of Natal s geographic isolation. The implantation of two railroads in the capital territory Estrada de Ferro de Natal a Nova Cruz, afterwards part of Great Western Railway Company network, and Estrada de Ferro Central do Rio Grande do Norte had serious implications in the urban environment. While railroad s structures were already consolidated, other transportation mechanisms were being implanted in the first decades of the 20th century, such as trams lines, which, by the way, was a transport modal that also used rails as a dislocation meaning. Considering these questions, we may ask: how come railroads and tramways demands, roads and buildings had influenced the internal organization of Natal? We work with the general hypothesis that the influence of technical networks, composed by tramways and railroads, over Natal s urban space happened in a diversified way, sometimes consolidating social aspects in certain areas, sometimes improving the occupation of others. The impact over the city s territory also happens in a diversified way between the buildings/railroad s complexes and the pathways. The different scale of the train in comparison to the trams velocity, size, noise level, flow, among others is also a cause to the different consequences in urban environment. The main objective of this work is to understand the role of circulation technical networks in the construction process of urban space in Natal, as a way to contribute to the urban historiography about the subject. The time frame adopted, between 1881 and 1937, marks the time path of railroads and tramways in Rio Grande do Norte: 1881 is the year of railroad s first section inauguration from Natal to São José do Mipibu as well of the railroad complex in the Republic Square in Natal; the year of 1937 marks the beginning of tramways declination process in the city. At this time railroads and tramways had to face more intensively the competition of motor vehicles. The theory reference adopted is based on concepts and analysis of authors, such as Flávio Villaça and Roberto Lobato Corrêa references to the concepts of urban structure , localization and accessibility and Gabriel Dupuy to explain the concept of urban technical networks . These references reveal the conflict of different realities in the urban universe interests and values which is an important factor about the construction of urban space. The information sources used were from two distinctive natures: primary, journals of the time studied and official government reports, and secondary, based on other works about the subject. It was also used by this study iconographic source, especially images from the data base of the research group História da Cidade, do Território e do Urbanismo .

A contribuição de técnicas modernas de reabilitação estrutural para autenticidade e integridade de edificações patrimoniais

This work discusses the study of the application of structural reinforcement and rehabilitation using modern techniques for interventions in repair works of historical buildings as well as the verification of the behavior of works that have already undergone different structural intervention techniques, with the objective of obtaining data to allow a comparative analysis of the advantages/disadvantages of techniques adapted in each case, regarding the interferences related the authenticity and integrity of the buildings belong to the constructed patrimony so as to obtain a basis for the theoretical foundation for choosing the best solution to be adopted in the case study which consists in an intervention of structural rehabilitation of the old historic building in the primary school "Augusto Severo"

Uma Lectina D-lactose específica da esponja marinha Cinachyrella apion: purificação, caracterização e interação com Leishmania chagasi

Four different sponge species were screened using Ouchterlony agarose gel and immunodiffusion tests to identify cross-reactivity with the polyclonal antibody IgG anti-deglicosilated CvL, a lectin from Cliona varians. Crude extract from the sponge Cinachyrella apion showed cross-reactivity and also a strong haemmaglutinating activity towards human erythrocytes of all ABO groups. Thus, it was submitted to acetone fractionation, IgG anti-deglicosilated CvL Sepharose affinity chromatography, and Fast Protein Liquid Chromatography (FPLC-AKTA) gel filtration on a Superose 6 10 300 column to purify a novel lectin. C. apion lectin (CaL) agglutinated all types of human erythrocytes with preference for papainized type A and O erythrocytes. The haemagglutinating activity is independent of Ca2+, Mg2+ and Mn2+ ions, and it was strongly inhibited by the disaccharide D-lactose, up to a minimum concentration of 6.25 mM. CaL molecular mass determined by FPLC-AKTA gel filtration on a Superose 12 10 300 column and SDS gel electrophoresis was approximately 124 kDa, consisting of eight subunits of 15.5 kDa, assembled by hydrophobic interactions. The lectin was relatively heat- and pH-stable. Leishmania chagasi romastigotes were agglutinated by CaL, indicating that lactose receptors could be presented in this parasite stage. These findings are indicative of the physiological defense roles of CaL and its possible use in the antibiosis of pathogenic protozoa

Simulação do escoamento monofásico em um estágio de uma bomba centrífuga utilizando técnicas de fluidodinâmica computacional

Oil production and exploration techniques have evolved in the last decades in order to increase fluid flows and optimize how the required equipment are used. The base functioning of Electric Submersible Pumping (ESP) lift method is the use of an electric downhole motor to move a centrifugal pump and transport the fluids to the surface. The Electric Submersible Pumping is an option that has been gaining ground among the methods of Artificial Lift due to the ability to handle a large flow of liquid in onshore and offshore environments. The performance of a well equipped with ESP systems is intrinsically related to the centrifugal pump operation. It is the pump that has the function to turn the motor power into Head. In this present work, a computer model to analyze the three-dimensional flow in a centrifugal pump used in Electric Submersible Pumping has been developed. Through the commercial program, ANSYS® CFX®, initially using water as fluid flow, the geometry and simulation parameters have been defined in order to obtain an approximation of what occurs inside the channels of the impeller and diffuser pump in terms of flow. Three different geometry conditions were initially tested to determine which is most suitable to solving the problem. After choosing the most appropriate geometry, three mesh conditions were analyzed and the obtained values were compared to the experimental characteristic curve of Head provided by the manufacturer. The results have approached the experimental curve, the simulation time and the model convergence were satisfactory if it is considered that the studied problem involves numerical analysis. After the tests with water, oil was used in the simulations. The results were compared to a methodology used in the petroleum industry to correct viscosity. In general, for models with water and oil, the results with single-phase fluids were coherent with the experimental curves and, through three-dimensional computer models, they are a preliminary evaluation for the analysis of the two-phase flow inside the channels of centrifugal pump used in ESP systems

Aplicação de técnicas eletroquímicas na determinação do potencial de corrosividade de ligas de alumínio em água produzida

The resistance of aluminum and their alloys, to the corrosion phenomenon, in aqueous solutions, is a result of the oxide layer formed. However, the corrosion process in the aluminum alloy is associated with the presence a second phase of particles or the presence of chloride ions which promote the disruption of the oxide layer located producing the corrosion process. On the other hand, the term water produced is used to describe the water after the separation of the oil and gas in API separators. The volumes of produced water arrive around 5 more times to the volume of oil produced. The greatest feature of the water is the presence of numerous pollutants. Due to the increased volume of waste around the world in the current decade, the outcome and the effect of the discharge of produced water on the environment has recently become an important issue of environmental concern where numerous treatments are aimed at reducing these contaminants before disposal. Then, this study aims to investigate the electrochemical corrosion behavior of aluminum alloy 6060 in presence of water produced and the influence of organic components as well as chloride ions, by using the electrochemical techniques of linear polarization. The modification of the passive layer and the likely breakpoints were observed by atomic force microscopy (AFM). In the pit formation potential around -0.4 to -0.8 V/EAg/AgCl was observed that the diffusion of chloride ions occurs via the layer formed with the probable formation of pits. Whereas, at temperatures above 65 °C, it was observed that the range of potential for thepit formation was -0.4 to -0.5 V/EAg/AgCl. In all reactions, the concentration of Al(OH)3 in the form of a gel was observed

Germinação de sementes e otimização de técnicas de micropropagação de umbuzeiro (spondias tuberosa, arr.) anacardiaceae

The brazilian-plum (Spondias tuberosa, His) is a tropical fruit tree that has been consolidated in the market for agribusiness processing, due to its characteristic flavor of fruit. Accordingly, studies to optimize the propagation of plants are necessary for production of seedlings with agronomic and quality assurance measures. This study aimed at determining the efficient techniques for uniform seed germination, as brazilian-plum seed present mechanical dormancy, and establish optimal culture media for multiplication of shoots from the in vitro micropropagation. Firstly, in a greenhouse at the Universidade Federal do Rio Grande do Norte, was evaluated the influence of different methods of breaking dormancy in the emergence of seedlings of brazilian-plum and speed of germination (IVG) of seeds. After 60 days of cultivation, it was found that splay in the distal portion of the seed was the best treatment, with rates of 85.33% in germinability and 3.415 of IVG, compared with the treatment of seed-soaking in water for 12h + humus and the control group. Subsequently, new sources of seedling explants were obtained in studies of tissue culture. Laboratory of Plant Biotechnology that the university, was used stem apex, nodal segments and internodes in search of decontamination with various concentrations of calcium hypochlorite [Ca(OCl)2] and micropropagation, inoculating them in half WPM (1980) with various concentrations of 6-benzylaminopurine (BAP). We used 10 sample units with three replications for different concentrations of [Ca(OCl)2], BAP and explants type. After thirty days, which was observed for the control of contamination, during the establishment in vitro, concentrations of [Ca(OCl)2] between 0.5% and 2.0% were effective in combating exogenous contamination of the apex. In nodal segments and internodes, concentrations of [Ca(OCl)2] between 1.0% and 2.0% and 1.5% and 2.0% were respectively, sufficient to reduce the percentage of losses in these infestations explants. For micropropagation, the culture medium supplemented with 0.1 mg.L-1 BAP promotes better development of multiple shoots per explants from nodal segment. However, success does not get to shoot training in internodal segment

Avaliação de técnicas de defumação para mexilhão Perna perna: análise sensorial e rendimento

The objective of the present work was evaluate two techniques of smoking, the hot traditional and with use of smoke natural aroma or "liquid smoke", having as control Perna perna mussels vapor cooked. Sensorial characteristics were appraised (appearance, color, aroma, texture, flavor and salt tenor) and yield processing. The experimental design was completely randomized with three treatments (T1 = smoked with liquid smoke; T2 = traditional smoked and T3 = just cooked, control), with nine repetitions. For sensorial analysis 30 people were used, where each one was considered a block. There was significant difference for processing performance among treatments (P<0.05), however there was not significant difference independent of smoked technique applied. Nevertheless, smoking technique using smoke natural aroma was more attractive, presenting better results with relationship to sensorial characteristics and final product packaged for commercialization.

Técnicas de análise multivariada na avaliação de injúrias pelo frio em mangas cv. Tommy Atkins

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Técnicas de análise multivariada na determinação de grupos homogêneos de produtores de leite

Nesta pesquisa objetivou-se captar a variedade de situações tecnológicas para identificar grupos de produtores, o mais semelhante possível, no conjunto de variáveis e características selecionadas. Foram considerados 72 produtores, 8,33% da amostra total, selecionados conforme 29 variáveis relacionadas a fatores produtivos. Avaliaram-se as variáveis de melhor representatividade dentro de cada fator e suas comunalidades dentro do conjunto de fatores analisados. Para a avaliação desses resultados, foram utilizados métodos de análise fatorial em componentes principais. Posteriormente, aplicou-se o método de análise de agrupamentos. O pluralismo tecnológico requer análises de agrupamento para viabilizar intervenções técnicas diferenciadas, o que permite a consolidação de condições de sustentabilidade a partir das reais necessidades de incorporação tecnológica dos produtores.

Comparação entre duas técnicas de neurorrafia do digital palmar em eqüinos

Foram comparadas duas técnicas de neurorrafia em seis eqüinos, divididos em três grupos (G), conforme o tempo para a biópsia. Os animais foram submetidos a neurectomia dos nervos digitais palmares (NDP) e aplicaram-se duas suturas epineurais (SE) e suturas com tubos de silicone (STS) em cada animal. Avaliaram-se os animais mensalmente pelo teste de sensibilidade e exame do aparelho locomotor até a realização das biópsias dos NDP. Aos 30 dias pós-cirurgia foi realizada biópsia no GI, aos 60 dias no GII e aos 180 dias no GIII. Macroscopicamente, o NDP encontrou-se envolvido por tecido conjuntivo fibroso. Microscopicamente, constataram-se proliferação axonal em uma amostra do GI e neuromas nas amostras dos GI, GII e GIII. Houve proliferação de tecido conjuntivo em todos os grupos no local de reparação para SE e adentrando no interior do tubo na STS. Visibilizaram-se infiltrado de células inflamatórias, alterações no coto proximal e degeneração no coto distal na SE e na STS. As técnicas não apresentaram resultados satisfatórios quanto ao grau de regeneração do coto proximal até o coto distal.

Dispersões sólidas de sinvastatina: preparação, caracterização, no estado sólido utilizando técnicas emergentes e estudo de estabilidade

This thesis aimed to assess the increase in solubility of simvastatin (SINV) with solid dispersions using techniques such as kneading (MA), co-solvent evaporation (ES), melting carrier (FC) and spray dryer (SD). Soluplus (SOL), PEG 6000 (PEG), PVP K-30 (PVP) e sodium lauryl sulphate (LSS) were used as carriers. The solid dispersions containing PEG [PEG-2(SD)], Soluplus [SOL-2(MA)] and sodium lauryl sulphate [LSS-2(ES)] were presented with a greater increase in solubility (5.02, 5.60 and 5.43 times respectively); analyses by ANOVA between the three groups did not present significant difference (p<0.05). In the phase solubility study, the calculation of the Gibbs free energy (ΔG) revealed that the spontaneity of solubilisation of SINV occurred in the order SOL>PEG >PVP 75%>LSS, always 80%. The phase diagrams of PEG and LSS presented solubilization stoichiometry of type 1:1 (type AL). The diagrams with PVP and SOL tend to 1:2 stoichiometry (type AL + AP). The stability coefficients (Ks) of the phase diagrams revealed that the most stable reactions occurred with LSS and PVP. The solid dispersions were characterized by Fourier transform infrared (FTIR), differential scanning calorimetry (DSC), scanning electron microscopy (SEM), particle size distribution (PSD), near-infrared spectroscopy imaging (NIR-CI) and X-ray diffraction of the powder using the Topas software (PDRX-TOPAS). The solid dispersion PEG-2(SD) presented the greatest homogeneity and the lowest degree of crystallinity (18.2%). The accelerated stability study revealed that the solid dispersions are less stable than SINV, with PEG-2(SD) being the least stable, confirmed by FTIR and DSC. The analyses by PDRX-TOPAS revealed the amorphous character of the dispersions and the mechanism of increasing solubility

Neurectomia digital em eqüinos: comparação das técnicas guilhotina e stripping

Compararam-se as dificuldades transcirúrgicas e as complicações pós-operatórias das técnicas guilhotina (TG) e stripping (TS) para a neurectomia digital em eqüinos. Sob anestesia com halotano, quatro éguas tiveram os nervos digitais de um dos membros torácicos e um dos pélvicos submetidos à TG, enquanto os nervos digitais dos membros colaterais foram submetidos à TS. Os tempos cirúrgicos médios de TG e TS foram semelhantes. O comprimento médio do fragmento do nervo removido foi três vezes maior em TS (P<0,001). Independente da técnica utilizada, houve perda total da sensibilidade nos talões de todos os membros dentro dos quatro primeiros meses da cirurgia. Após 14 meses, houve retorno da sensibilidade em 37% dos membros em TG e 18,8% em TS (P=0,06). Ao exame de palpação para identificação de neuromas dolorosos, houve episódios de sensibilidade discreta em um maior número de cotos nervosos proximais operados com TS, 53,6% contra 6,4% dos operados com TG (P=0,003). Ambas as técnicas foram satisfatórias por não apresentarem maiores complicações durante ou após a cirurgia. Considerou-se que TG apresentou menor potencial para produzir reinervação e neuromas dolorosos.

Avaliação macroscópica, microscópica e histomorfométrica do tecido cicatricial pós-cirúrgico de eqüinos submetidos a duas técnicas de neurectomia digital

Avaliou-se macro e microscopicamente o tecido cicatricial pós-operatório de eqüinos submetidos a duas técnicas de neurectomia digital: guilhotina (TG) e stripping (TS). Decorridos 14 meses das cirurgias, foram colhidas 32 amostras de tecido cicatricial em quatro éguas, que tiveram os membros submetidos a ambas as técnicas. À macroscopia, verificaram-se as dimensões da cicatriz do coto proximal e a distância entre os cotos proximal e distal. À microscopia, foi quantificada a proporção de tecido nervoso regenerado por meio de histomorfometria. Não houve diferença nas dimensões do tecido cicatricial, contudo a distância entre cotos foi 5,6 vezes maior na TS (P<0,001). Histologicamente, observou-se a presença de tecido conjuntivo frouxo e denso, macrófagos e fibras nervosas delgadas em ambas as técnicas cirúrgicas. Estruturas nodulares, compostas por fascículos nervosos, foram visualizadas em 56,2% (9/16) das amostras colhidas em nervos submetidos à TS. As porcentagens médias de tecido nervoso no tecido cicatricial foram de 0,31% na TG e 2,6% na TS (P<0,001). Concluiu-se que o retorno à sensibilidade nervosa deve demorar mais a ocorrer após a TS, devido à maior distância entre cotos. A maior proporção de tecido nervoso sugere que essa técnica favorece a regeneração nervosa.