Layered smart grid architecture approach and field tests by ZigBee technology

This paper presents a layered Smart Grid architecture enhancing security and reliability, having the ability to act in order to maintain and correct infrastructure components without affecting the client service. The architecture presented is based in the core of well design software engineering, standing upon standards developed over the years. The layered Smart Grid offers a base tool to ease new standards and energy policies implementation. The ZigBee technology implementation test methodology for the Smart Grid is presented, and provides field tests using ZigBee technology to control the new Smart Grid architecture approach. (C) 2014 Elsevier Ltd. All rights reserved.

Role of abrasive material on micro-abrasion wear tests

Micro-abrasion wear tests with ball-cratering configuration are widely used. Sources of variability are already studied by different authors and conditions for testing are parameterized by BS EN 1071-6: 2007 standard which refers silicon carbide as abrasive. However, the use of other abrasives is possible and allowed. In this work, ball-cratering wear tests were performed using four different abrasive particles of three dissimilar materials: diamond, alumina and silicon carbide. Tests were carried out under the same conditions on a steel plate provided with TiB2 hard coating. For each abrasive, five different test durations were used allowing understanding the initial wear phenomena. Composition and shape of abrasive particles were investigated by SEM and EDS. Scar areas were observed by optical and electronic microscopy in order to understand the wear effects caused by each of them. Scar geometry and grooves were analyzed and compared. Wear coefficient was calculated for each situation. It was observed that diamond particles produce well-defined and circular wear scars. Different silicon carbide particles presented dissimilar results as consequence of distinct particle shape and size distribution.

Delamination analysis of carbon fibre reinforced laminates: evaluation of a special step drill

Drilling of carbon fibre/epoxy laminates is usually carried out using standard drills. However, it is necessary to adapt the processes and/or tooling as the risk of delamination, or other damages, is high. These problems can affect mechanical properties of produced parts, therefore, lower reliability. In this paper, four different drills – three commercial and a special step (prototype) – are compared in terms of thrust force during drilling and delamination. In order to evaluate damage, enhanced radiography is applied. The resulting images were then computational processed using a previously developed image processing and analysis platform. Results show that the prototype drill had encouraging results in terms of maximum thrust force and delamination reduction. Furthermore, it is possible to state that a correct choice of drill geometry, particularly the use of a pilot hole, a conservative cutting speed – 53 m/min – and a low feed rate – 0.025 mm/rev – can help to prevent delamination.

Influence of the abrasive particles size in the micro-abrasion wear tests of TiAlSiN thin coatings

Ball rotating micro-abrasion tribometers are commonly used to carry out wear tests on thin hard coatings. In these tests, different kinds of abrasives were used, as alumina (Al2O3), silicon carbide (SiC) or diamond. In each kind of abrasive, several particle sizes can be used. Some studies were developed in order to evaluate the influence of the abrasive particle shape in the micro-abrasion process. Nevertheless, the particle size was not well correlated with the material removed amount and wear mechanisms. In this work, slurry of SiC abrasive in distilled water was used, with three different particles size. Initial surface topography was accessed by atomic force microscopy (AFM). Coating hardness measurements were performed with a micro-hardness tester. In order to evaluate the wear behaviour, a TiAlSiN thin hard film was used. The micro-abrasion tests were carried out with some different durations. The abrasive effect of the SiC particles was observed by scanning electron microscopy (SEM) both in the films (hard material) as in the substrate (soft material), after coating perforation. Wear grooves and removed material rate were compared and discussed.

Projeto de um conversor eletrónico para utilização num sistema eólico de produção de energia

Dissertação para obtenção do grau de Mestre em Engenharia Electrotécnica no Ramo de Automação e Electrónica Industrial

Semi-destructive in situ tests as support to the assessment of a conservation process

This paper refers to the assessment on site by semi-destructive testing (SDT) methods of the consolidation efficiency of a conservation process developed by Henriques (2011) for structural and non-structural pine wood elements in service. This study was applied on scots pine wood (Pinus sylvestris L.) degraded by fungi after treatment with a biocidal product followed by consolidation with a polymeric product. This solution avoids substitutions of wood moderately degraded by fungi, improving its physical and mechanical characteristics. The consolidation efficiency was assessed on site by methods of drill resistance and penetration resistance. The SDT methods used showed good sensitivity to the conservation process and could evaluate their effectiveness. (C) 2015 Elsevier Ltd. All rights reserved.

Efficient schedulability tests for real-time embedded systems with urgent routines

Task scheduling is one of the key mechanisms to ensure timeliness in embedded real-time systems. Such systems have often the need to execute not only application tasks but also some urgent routines (e.g. error-detection actions, consistency checkers, interrupt handlers) with minimum latency. Although fixed-priority schedulers such as Rate-Monotonic (RM) are in line with this need, they usually make a low processor utilization available to the system. Moreover, this availability usually decreases with the number of considered tasks. If dynamic-priority schedulers such as Earliest Deadline First (EDF) are applied instead, high system utilization can be guaranteed but the minimum latency for executing urgent routines may not be ensured. In this paper we describe a scheduling model according to which urgent routines are executed at the highest priority level and all other system tasks are scheduled by EDF. We show that the guaranteed processor utilization for the assumed scheduling model is at least as high as the one provided by RM for two tasks, namely 2(2√−1). Seven polynomial time tests for checking the system timeliness are derived and proved correct. The proposed tests are compared against each other and to an exact but exponential running time test.

Water jet based autonomous surface vehicle for coastal waters operations

This paper presents the design of low cost, small autonomous surface vehicle for missions in the coastal waters and specifically for the challenging surf zone. The main objective of the vehicle design described in this paper is to address both the capability of operation at sea in relative challenging conditions and maintain a very low set of operational requirements (ease of deployment). This vehicle provides a first step towards being able to perform general purpose missions (such as data gathering or patrolling) and to at least in a relatively short distances to be able to be used in rescue operations (with very low handling requirements) such as carrying support to humans on the water. The USV is based on a commercially available fiber glass hull, it uses a directional waterjet powered by an electrical brushless motor for propulsion, thus without any protruding propeller reducing danger in rescue operations. Its small dimensions (1.5 m length) and weight allow versatility and ease of deployment. The vehicle design is described in this paper both from a hardware and software point of view. A characterization of the vehicle in terms of energy consumption and performance is provided both from test tank and operational scenario tests. An example application in search and rescue is also presented and discussed with the integration of this vehicle in the European ICARUS (7th framework) research project addressing the development and integration of robotic tools for large scale search and rescue operations.

Step based physical activity guidelines for preschool-aged children

Objective Public health organizations recommend that preschool-aged children accumulate at least 3 h of physical activity (PA) daily. Objective monitoring using pedometers offers an opportunity to measure preschooler's PA and assess compliance with this recommendation. The purpose of this study was to derive step-based recommendations consistent with the 3 h PA recommendation for preschool-aged children. Method The study sample comprised 916 preschool-aged children, aged 3 to 6 years (mean age = 5.0 ± 0.8 years). Children were recruited from kindergartens located in Portugal, between 2009 and 2013. Children wore an ActiGraph GT1M accelerometer that measured PA intensity and steps per day simultaneously over a 7-day monitoring period. Receiver operating characteristic (ROC) curve analysis was used to identify the daily step count threshold associated with meeting the daily 3 hour PA recommendation. Results A significant correlation was observed between minutes of total PA and steps per day (r = 0.76, p < 0.001). The optimal step count for ≥ 3 h of total PA was 9099 steps per day (sensitivity (90%) and specificity (66%)) with area under the ROC curve = 0.86 (95% CI: 0.84 to 0.88). Conclusion Preschool-aged children who accumulate less than 9000 steps per day may be considered Insufficiently Active.

Automatização de sistema de medição múltiplo de ensaio de manómetros analógicos

A dissertação em apreço resultou da necessidade em otimizar os recursos técnicos, mas sobretudo humanos, afetos às verificações de instrumentos de medição, no âmbito do Controlo Metrológico Legal. Estas verificações, realizadas nos termos do cumprimento das competências outrora atribuídas à Direção de Serviços da Qualidade da então Direção Regional da Economia do Norte, eram operacionalizadas pela Divisão da Qualidade e Licenciamento, na altura dirigida pelo subscritor da presente tese, nomeadamente no que respeita aos ensaios efetuados, em laboratório, a manómetros analógicos. O objetivo principal do trabalho foi alcançado mediante o desenvolvimento de um automatismo, materializado pela construção de um protótipo, cuja aplicação ao comparador de pressão múltiplo, dantes em utilização, permitiria realizar a leitura da indicação de cada manómetro analógico através de técnicas de processamento de imagem, função esta tradicionalmente efetuada manualmente por um operador especializado. As metodologias de comando, controlo e medição desse automatismo foram realizadas através de um algoritmo implementado no software LabVIEW® da National Intruments, particularmente no que respeita ao referido processamento das imagens adquiridas por uma câmara de vídeo USB. A interface com o hardware foi concretizada recorrendo a um módulo de Aquisição de Dados Multifuncional (DAQ) USB-6212, do mesmo fabricante. Para o posicionamento horizontal e vertical da câmara de vídeo USB, recorreu-se a guias lineares acionadas por motores de passo, sendo que estes dispositivos foram igualmente empregues no acionamento do comparador de pressão. Por último, procedeu-se à aquisição digital da leitura do padrão, recorrendo à respetiva virtualização, bem como a uma aplicação desenvolvida neste projeto, designada appMAN, destinada à gestão global do referido automatismo, nomeadamente no que se refere ao cálculo do resultado da medição, erro e incerteza associada, e emissão dos respetivos documentos comprovativos.

Continuidade de cuidados numa Unidade de Saúde Familiar : o efeito nos custos

RESUMO - Caracterização do problema: O sistema de saúde português atingiu um patamar de ineficiência tal que urge ser reestruturado de forma a torná-lo sustentável. De forma a atingir este nível de sustentabilidade, uma série de soluções podem ser consideradas das quais destacamos a integração de cuidados. Este conceito exige que os diferentes níveis de saúde sigam um único caminho, trabalhando de forma coordenada e contínua. A integração de cuidados pode ser implementada através de várias tipologias entre as quais se destaca a integração clínica que por sua vez é composta pela continuidade de cuidados. Assim, ao medir a continuidade de cuidados, quantifica-se de certa forma a integração de cuidados. Objetivos: Avaliar o impacto da continuidade de cuidados nos custos. Metodologia: Os dados foram analisados através de estatísticas descritivas para verificar o seu grau de normalidade. Posteriormente foram aplicados testes t-student para analisar a existência de diferenças estatisticamente significativas entre as médias das diferentes variáveis. Foi então estudado o grau de associação entre variáveis através da correlação de spearman. Por fim, foi utilizado o modelo de regressão log-linear para verificar a existência de uma relação entre as várias naturezas de custos e os índices de continuidade. Com base neste modelo foram simulados dois cenários para estimar o impacto da maximização da continuidade de cuidados nas várias naturezas de custos. Conclusões: No geral, verifica-se uma relação muito ligeira entre a continuidade de cuidados e os custos. Mais especificamente, uma relação mais duradoura entre o médico e o doente resulta numa poupança de custos, independentemente da tipologia. Analisando a densidade da relação, observa-se uma relação positiva entre a mesma e os custos totais e o custo com Meios Complementares de Diagnóstico e Terapêutica (MCDT). Contudo verifica-se uma relação médico-doente negativa entre a densidade e os custos com medicamentos e com pessoal. Ao analisar o impacto da continuidade de cuidados nos custos, conclui-se que apenas a duração da relação médico-doente tem um impacto negativo em todas as categorias de custos, exceto o custo com medicamentos. A densidade de cuidados tem um impacto negativo apenas no custo com pessoal, influenciando positivamente as outras categorias de custos. Extrapolando para o nível nacional se o nível de densidade de uma relação fosse maximizado, existiria uma poupança de 0,18 euros, por ano, em custos com pessoal.

Insertion dans les soins après une première hospitalisation dans un secteur pour psychose [Linkage to care after first hospitalisation for psychosis]

BACKGROUND: First hospitalisation for a psychotic episode causes intense distress to patients and families, but offers an opportunity to make a diagnosis and start treatment. However, linkage to outpatient psychiatric care remains a notoriously difficult step for young psychotic patients, who frequently interrupt treatment after hospitalisation. Persistence of symptoms, and untreated psychosis may therefore remain a problem despite hospitalisation and proper diagnosis. With persisting psychotic symptoms, numerous complications may arise: breakdown in relationships, loss of family and social support, loss of employment or study interruption, denial of disease, depression, suicide, substance abuse and violence. Understanding mechanisms that might promote linkage to outpatient psychiatric care is therefore a critical issue, especially in early intervention in psychotic disorders. OBJECTIVE: To study which factors hinder or promote linkage of young psychotic patients to outpatient psychiatric care after a first hospitalisation, in the absence of a vertically integrated program for early psychosis. Method. File audit study of all patients aged 18 to 30 who were admitted for the first time to the psychiatric University Hospital of Lausanne in the year 2000. For statistical analysis, chi2 tests were used for categorical variables and t-test for dimensional variables; p<0.05 was considered as statistically significant. RESULTS: 230 patients aged 18 to 30 were admitted to the Lausanne University psychiatric hospital for the first time during the year 2000, 52 of them with a diagnosis of psychosis (23%). Patients with psychosis were mostly male (83%) when compared with non-psychosis patients (49%). Furthermore, they had (1) 10 days longer mean duration of stay (24 vs 14 days), (2) a higher rate of compulsory admissions (53% vs 22%) and (3) were more often hospitalised by a psychiatrist rather than by a general practitioner (83% vs 53%). Other socio-demographic and clinical features at admission were similar in the two groups. Among the 52 psychotic patients, 10 did not stay in the catchment area for subsequent treatment. Among the 42 psychotic patients who remained in the catchment area after discharge, 20 (48%) did not attend the scheduled or rescheduled outpatient appointment. None of the socio demographic characteristics were associated with attendance to outpatient appointments. On the other hand, voluntary admission and suicidal ideation before admission were significantly related to attending the initial appointment. Moreover, some elements of treatment seemed to be associated with higher likelihood to attend outpatient treatment: (1) provision of information to the patient regarding diagnosis, (2) discussion about the treatment plan between in- and outpatient staff, (3) involvement of outpatient team during hospitalisation, and (4) elaboration of concrete strategies to face basic needs, organise daily activities or education and reach for help in case of need. CONCLUSION: As in other studies, half of the patients admitted for a first psychotic episode failed to link to outpatient psychiatric care. Our study suggests that treatment rather than patient's characteristics play a critical role in this phenomenon. Development of a partnership and involvement of patients in the decision process, provision of good information regarding the illness, clear definition of the treatment plan, development of concrete strategies to cope with the illness and its potential complications, and involvement of the outpatient treating team already during hospitalisation, all came out as critical strategies to facilitate adherence to outpatient care. While the current rate of disengagement after admission is highly concerning, our finding are encouraging since they constitute strategies that can easily be implemented. An open approach to psychosis, the development of partnership with patients and a better coordination between inpatient and outpatient teams should therefore be among the targets of early intervention programs. These observations might help setting up priorities when conceptualising new programs and facilitate the implementation of services that facilitate engagement of patients in treatment during the critical initial phase of psychotic disorders.

Routine use of point-of-care tests: usefulness and application in clinical microbiology.

Point-of-care (POC) tests offer potentially substantial benefits for the management of infectious diseases, mainly by shortening the time to result and by making the test available at the bedside or at remote care centres. Commercial POC tests are already widely available for the diagnosis of bacterial and viral infections and for parasitic diseases, including malaria. Infectious diseases specialists and clinical microbiologists should be aware of the indications and limitations of each rapid test, so that they can use them appropriately and correctly interpret their results. The clinical applications and performance of the most relevant and commonly used POC tests are reviewed. Some of these tests exhibit insufficient sensitivity, and should therefore be coupled to confirmatory tests when the results are negative (e.g. Streptococcus pyogenes rapid antigen detection test), whereas the results of others need to be confirmed when positive (e.g. malaria). New molecular-based tests exhibit better sensitivity and specificity than former immunochromatographic assays (e.g. Streptococcus agalactiae detection). In the coming years, further evolution of POC tests may lead to new diagnostic approaches, such as panel testing, targeting not just a single pathogen, but all possible agents suspected in a specific clinical setting. To reach this goal, the development of serology-based and/or molecular-based microarrays/multiplexed tests will be needed. The availability of modern technology and new microfluidic devices will provide clinical microbiologists with the opportunity to be back at the bedside, proposing a large variety of POC tests that will allow quicker diagnosis and improved patient care.

Risk factors for positive tuberculin skin tests among migrant and resident children in Lausanne, Switzerland.

SETTING: Ambulatory paediatric clinic in Lausanne, Switzerland, a country with a significant proportion of tuberculosis (TB) among immigrants. AIM: To assess the factors associated with positive tuberculin skin tests (TST) among children examined during a health check-up or during TB contact tracing, notably the influence of BCG vaccination (Bacille Calmette Guérin) and history of TB contact. METHOD: A descriptive study of children who had a TST (2 Units RT23) between November 2002 and April 2004. Age, sex, history of TB contact, BCG vaccination status, country of origin and birth outside Switzerland were recorded. RESULTS: Of 234 children, 176 (75%) had a reaction equal to zero and 31 (13%) tested positive (>10 mm). In a linear regression model, the size of the TST varied significantly according to the history of TB contact, age, TB incidence in the country of origin and BCG vaccination status but not according to sex or birth in or outside Switzerland. In a logistic regression model including all the recorded variables, age (Odds Ratio = 1.21, 95% CI 1.08; 1.35), a history of TB contact (OR = 7.31, 95% CI 2.23; 24) and the incidence of TB in the country of origin (OR = 1.01, 95% CI 1.00; 1.02) were significantly associated with a positive TST but sex (OR = 1.18, 95% CI 0.50; 2.78) and BCG vaccination status (OR = 2.97, 95% CI 0.91; 9.72) were not associated. CONCLUSIONS: TB incidence in the country of origin, BCG vaccination and age influence the TSTreaction (size or proportion of TST > or = 10 mm). However the most obvious risk factor for a positive TST is a history of contact with TB.

Comparative resilience of clinical perimetric tests to induced levels of intraocular straylight.

PURPOSE: To investigate the effect of intraocular straylight (IOS) induced by white opacity filters (WOF) on threshold measurements for stimuli employed in three perimeters: standard automated perimetry (SAP), pulsar perimetry (PP) and the Moorfields motion displacement test (MDT).¦METHODS: Four healthy young (24-28 years old) observers were tested six times with each perimeter, each time with one of five different WOFs and once without, inducing various levels of IOS (from 10% to 200%). An increase in IOS was measured with a straylight meter. The change in sensitivity from baseline was normalized, allowing comparison of standardized (z) scores (change divided by the SD of normative values) for each instrument.¦RESULTS: SAP and PP thresholds were significantly affected (P < 0.001) by moderate to large increases in IOS (50%-200%). The drop in motion displacement (MD) from baseline with WOF 5, was approximately 5 dB, in both SAP and PP which represents a clinically significant loss; in contrast the change in MD with MDT was on average 1 minute of arc, which is not likely to indicate a clinically significant loss.¦CONCLUSIONS: The Moorfields MDT is more robust to the effects of additional straylight in comparison with SAP or PP.