On nonlinear dynamics and control of a robotic arm with chaos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Projeto de controladores robustos para acionamento de um motor de indução trifásico

Pós-graduação em Engenharia Elétrica - FEIS

Cost Management Practices and Strategic Perspectives: a study in the construction industry of the State of Parana

The purpose of this paper is to investigate the cost management practices of building industry companies of Parana that follow the typology of Porter's strategies. The sample comprises member companies of the Association of Construction Industries of the State of Parana (PR-SINDUSCON) operating in the segment of residential buildings. The data were collected by means of questionnaires sent to 317 SINDUSCON members. 69 were returned and 54 used for our research. Exploratory Factorial Analysis of the data allowed us to identify two groups of cost management practices. Analyses suggest equality between the adopted cost management practices and the Cost Control Planning (CCP) practices among the companies of the Group 1, regardless of the generic strategy adopted. The companies of the Group 2 that adopted the differentiation strategy seem to use mainly the ACR cost management practice. Our findings differ from those obtained by Chenhall insofar as companies that adopt low cost strategies tend to use managerial controls focused on cost control and rigid budgetary controls.

Postural control in elderly women with osteoporosis: comparison of balance, strengthening and stretching exercises. A randomized controlled trial

Objective: To compare the efficacy of balance training associated with muscle strengthening or stretching, relative to no intervention, in the postural control of elderly women with osteoporosis. Design: A randomized, controlled trial. Subjects and interventions: Sample consisted of 50 women aged 65 years or older, with osteoporosis, randomized into one of three groups: strengthening group (n = 17) performed balance training with muscle strengthening; stretching group (n = 17) performed balance training with stretching; and control group (n = 16), no activities. Interventions lasted eight weeks, twice a week, 60 minutes a day. Main measures: Postural control was evaluated by the modified Clinical Test of Sensory Interaction for Balance (CTSIBm) and Limits of Stability Test. Strength was assessed by dynamometry and the shortening of the hamstrings by goniometry. Results: Relative to controls, participants in the strengthening group displayed significantly increased dorsiflexion strength and knee flexion strength, as well as centre of pressure velocity, directional control, and oscillation velocity (CTSIBm test). The stretching group had significantly improvements in hamstring length, knee flexion strength, centre of pressure velocity, and amplitude of movements. Relative to the stretching group, the strengthening group yielded better knee extension strength and directional control. Conclusion: The results suggest that both interventions are effective in improving postural control when compared to the control group, and the strengthening group was superior to the stretching group in knee extension strength and in directional control.

Frequency and precision of feedback and the adaptive process of learning a dual motor task

This work investigated the effects of frequency and precision of feedback on the learning of a dual-motor task. One hundred and twenty adults were randomly assigned to six groups of different knowledge of results (KR), frequency (100%, 66% or 33%) and precision (specific or general) levels. In the stabilization phase, participants performed the dual task (combination of linear positioning and manual force control) with the provision of KR. Ten non-KR adaptation trials were performed for the same task, but with the introduction of an electromagnetic opposite traction force. The analysis showed a significant main effect for frequency of KR. The participants who received KR in 66% of the stabilization trials showed superior adaptation performance than those who received 100% or 33%. This finding reinforces that there is an optimal level of information, neither too high nor too low, for motor learning to be effective.

Arterial O2 content and tension in regulation of cardiac output and leg blood flow during exercise in humans

[EN] A universal O2 sensor presumes that compensation for impaired O2 delivery is triggered by low O2 tension, but in humans, comparisons of compensatory responses to altered arterial O2 content (CaO2) or tension (PaO2) have not been reported. To directly compare cardiac output (QTOT) and leg blood flow (LBF) responses to a range of CaO2 and PaO2, seven healthy young men were studied during two-legged knee extension exercise with control hemoglobin concentration ([Hb] = 144.4 +/- 4 g/l) and at least 1 wk later after isovolemic hemodilution ([Hb] = 115 +/- 2 g/l). On each study day, subjects exercised twice at 30 W and on to voluntary exhaustion with an FIO2 of 0.21 or 0.11. The interventions resulted in two conditions with matched CaO2 but markedly different PaO2 (hypoxia and anemia) and two conditions with matched PaO2 and different CaO2 (hypoxia and anemia + hypoxia). PaO2 varied from 46 +/- 3 Torr in hypoxia to 95 +/- 3 Torr (range 37 to >100) in anemia (P < 0.001), yet LBF at exercise was nearly identical. However, as CaO2 dropped from 190 +/- 5 ml/l in control to 132 +/- 2 ml/l in anemia + hypoxia (P < 0.001), QTOT and LBF at 30 W rose to 12.8 +/- 0.8 and 7.2 +/- 0.3 l/min, respectively, values 23 and 47% above control (P < 0.01). Thus regulation of QTOT, LBF, and arterial O2 delivery to contracting intact human skeletal muscle is dependent for signaling primarily on CaO2, not PaO2. This finding suggests that factors related to CaO2 or [Hb] may play an important role in the regulation of blood flow during exercise in humans.

Seizure prediction and control in epilepsy

The first part of my thesis presents an overview of the different approaches used in the past two decades in the attempt to forecast epileptic seizure on the basis of intracranial and scalp EEG. Past research could reveal some value of linear and nonlinear algorithms to detect EEG features changing over different phases of the epileptic cycle. However, their exact value for seizure prediction, in terms of sensitivity and specificity, is still discussed and has to be evaluated. In particular, the monitored EEG features may fluctuate with the vigilance state and lead to false alarms. Recently, such a dependency on vigilance states has been reported for some seizure prediction methods, suggesting a reduced reliability. An additional factor limiting application and validation of most seizure-prediction techniques is their computational load. For the first time, the reliability of permutation entropy [PE] was verified in seizure prediction on scalp EEG data, contemporarily controlling for its dependency on different vigilance states. PE was recently introduced as an extremely fast and robust complexity measure for chaotic time series and thus suitable for online application even in portable systems. The capability of PE to distinguish between preictal and interictal state has been demonstrated using Receiver Operating Characteristics (ROC) analysis. Correlation analysis was used to assess dependency of PE on vigilance states. Scalp EEG-Data from two right temporal epileptic lobe (RTLE) patients and from one patient with right frontal lobe epilepsy were analysed. The last patient was included only in the correlation analysis, since no datasets including seizures have been available for him. The ROC analysis showed a good separability of interictal and preictal phases for both RTLE patients, suggesting that PE could be sensitive to EEG modifications, not visible on visual inspection, that might occur well in advance respect to the EEG and clinical onset of seizures. However, the simultaneous assessment of the changes in vigilance showed that: a) all seizures occurred in association with the transition of vigilance states; b) PE was sensitive in detecting different vigilance states, independently of seizure occurrences. Due to the limitations of the datasets, these results cannot rule out the capability of PE to detect preictal states. However, the good separability between pre- and interictal phases might depend exclusively on the coincidence of epileptic seizure onset with a transition from a state of low vigilance to a state of increased vigilance. The finding of a dependency of PE on vigilance state is an original finding, not reported in literature, and suggesting the possibility to classify vigilance states by means of PE in an authomatic and objectic way. The second part of my thesis provides the description of a novel behavioral task based on motor imagery skills, firstly introduced (Bruzzo et al. 2007), in order to study mental simulation of biological and non-biological movement in paranoid schizophrenics (PS). Immediately after the presentation of a real movement, participants had to imagine or re-enact the very same movement. By key release and key press respectively, participants had to indicate when they started and ended the mental simulation or the re-enactment, making it feasible to measure the duration of the simulated or re-enacted movements. The proportional error between duration of the re-enacted/simulated movement and the template movement were compared between different conditions, as well as between PS and healthy subjects. Results revealed a double dissociation between the mechanisms of mental simulation involved in biological and non-biologial movement simulation. While for PS were found large errors for simulation of biological movements, while being more acurate than healthy subjects during simulation of non-biological movements. Healthy subjects showed the opposite relationship, making errors during simulation of non-biological movements, but being most accurate during simulation of non-biological movements. However, the good timing precision during re-enactment of the movements in all conditions and in both groups of participants suggests that perception, memory and attention, as well as motor control processes were not affected. Based upon a long history of literature reporting the existence of psychotic episodes in epileptic patients, a longitudinal study, using a slightly modified behavioral paradigm, was carried out with two RTLE patients, one patient with idiopathic generalized epilepsy and one patient with extratemporal lobe epilepsy. Results provide strong evidence for a possibility to predict upcoming seizures in RTLE patients behaviorally. In the last part of the thesis it has been validated a behavioural strategy based on neurobiofeedback training, to voluntarily control seizures and to reduce there frequency. Three epileptic patients were included in this study. The biofeedback was based on monitoring of slow cortical potentials (SCPs) extracted online from scalp EEG. Patients were trained to produce positive shifts of SCPs. After a training phase patients were monitored for 6 months in order to validate the ability of the learned strategy to reduce seizure frequency. Two of the three refractory epileptic patients recruited for this study showed improvements in self-management and reduction of ictal episodes, even six months after the last training session.

Architectures and design patterns for functional design of logic control and diagnostics in industrial automation

Recently in most of the industrial automation process an ever increasing degree of automation has been observed. This increasing is motivated by the higher requirement of systems with great performance in terms of quality of products/services generated, productivity, efficiency and low costs in the design, realization and maintenance. This trend in the growth of complex automation systems is rapidly spreading over automated manufacturing systems (AMS), where the integration of the mechanical and electronic technology, typical of the Mechatronics, is merging with other technologies such as Informatics and the communication networks. An AMS is a very complex system that can be thought constituted by a set of flexible working stations, one or more transportation systems. To understand how this machine are important in our society let considerate that every day most of us use bottles of water or soda, buy product in box like food or cigarets and so on. Another important consideration from its complexity derive from the fact that the the consortium of machine producers has estimated around 350 types of manufacturing machine. A large number of manufacturing machine industry are presented in Italy and notably packaging machine industry,in particular a great concentration of this kind of industry is located in Bologna area; for this reason the Bologna area is called “packaging valley”. Usually, the various parts of the AMS interact among them in a concurrent and asynchronous way, and coordinate the parts of the machine to obtain a desiderated overall behaviour is an hard task. Often, this is the case in large scale systems, organized in a modular and distributed manner. Even if the success of a modern AMS from a functional and behavioural point of view is still to attribute to the design choices operated in the definition of the mechanical structure and electrical electronic architecture, the system that governs the control of the plant is becoming crucial, because of the large number of duties associated to it. Apart from the activity inherent to the automation of themachine cycles, the supervisory system is called to perform other main functions such as: emulating the behaviour of traditional mechanical members thus allowing a drastic constructive simplification of the machine and a crucial functional flexibility; dynamically adapting the control strategies according to the different productive needs and to the different operational scenarios; obtaining a high quality of the final product through the verification of the correctness of the processing; addressing the operator devoted to themachine to promptly and carefully take the actions devoted to establish or restore the optimal operating conditions; managing in real time information on diagnostics, as a support of the maintenance operations of the machine. The kind of facilities that designers can directly find on themarket, in terms of software component libraries provides in fact an adequate support as regard the implementation of either top-level or bottom-level functionalities, typically pertaining to the domains of user-friendly HMIs, closed-loop regulation and motion control, fieldbus-based interconnection of remote smart devices. What is still lacking is a reference framework comprising a comprehensive set of highly reusable logic control components that, focussing on the cross-cutting functionalities characterizing the automation domain, may help the designers in the process of modelling and structuring their applications according to the specific needs. Historically, the design and verification process for complex automated industrial systems is performed in empirical way, without a clear distinction between functional and technological-implementation concepts and without a systematic method to organically deal with the complete system. Traditionally, in the field of analog and digital control design and verification through formal and simulation tools have been adopted since a long time ago, at least for multivariable and/or nonlinear controllers for complex time-driven dynamics as in the fields of vehicles, aircrafts, robots, electric drives and complex power electronics equipments. Moving to the field of logic control, typical for industrial manufacturing automation, the design and verification process is approached in a completely different way, usually very “unstructured”. No clear distinction between functions and implementations, between functional architectures and technological architectures and platforms is considered. Probably this difference is due to the different “dynamical framework”of logic control with respect to analog/digital control. As a matter of facts, in logic control discrete-events dynamics replace time-driven dynamics; hence most of the formal and mathematical tools of analog/digital control cannot be directly migrated to logic control to enlighten the distinction between functions and implementations. In addition, in the common view of application technicians, logic control design is strictly connected to the adopted implementation technology (relays in the past, software nowadays), leading again to a deep confusion among functional view and technological view. In Industrial automation software engineering, concepts as modularity, encapsulation, composability and reusability are strongly emphasized and profitably realized in the so-calledobject-oriented methodologies. Industrial automation is receiving lately this approach, as testified by some IEC standards IEC 611313, IEC 61499 which have been considered in commercial products only recently. On the other hand, in the scientific and technical literature many contributions have been already proposed to establish a suitable modelling framework for industrial automation. During last years it was possible to note a considerable growth in the exploitation of innovative concepts and technologies from ICT world in industrial automation systems. For what concerns the logic control design, Model Based Design (MBD) is being imported in industrial automation from software engineering field. Another key-point in industrial automated systems is the growth of requirements in terms of availability, reliability and safety for technological systems. In other words, the control system should not only deal with the nominal behaviour, but should also deal with other important duties, such as diagnosis and faults isolations, recovery and safety management. Indeed, together with high performance, in complex systems fault occurrences increase. This is a consequence of the fact that, as it typically occurs in reliable mechatronic systems, in complex systems such as AMS, together with reliable mechanical elements, an increasing number of electronic devices are also present, that are more vulnerable by their own nature. The diagnosis problem and the faults isolation in a generic dynamical system consists in the design of an elaboration unit that, appropriately processing the inputs and outputs of the dynamical system, is also capable of detecting incipient faults on the plant devices, reconfiguring the control system so as to guarantee satisfactory performance. The designer should be able to formally verify the product, certifying that, in its final implementation, it will perform itsrequired function guarantying the desired level of reliability and safety; the next step is that of preventing faults and eventually reconfiguring the control system so that faults are tolerated. On this topic an important improvement to formal verification of logic control, fault diagnosis and fault tolerant control results derive from Discrete Event Systems theory. The aimof this work is to define a design pattern and a control architecture to help the designer of control logic in industrial automated systems. The work starts with a brief discussion on main characteristics and description of industrial automated systems on Chapter 1. In Chapter 2 a survey on the state of the software engineering paradigm applied to industrial automation is discussed. Chapter 3 presentes a architecture for industrial automated systems based on the new concept of Generalized Actuator showing its benefits, while in Chapter 4 this architecture is refined using a novel entity, the Generalized Device in order to have a better reusability and modularity of the control logic. In Chapter 5 a new approach will be present based on Discrete Event Systems for the problemof software formal verification and an active fault tolerant control architecture using online diagnostic. Finally conclusive remarks and some ideas on new directions to explore are given. In Appendix A are briefly reported some concepts and results about Discrete Event Systems which should help the reader in understanding some crucial points in chapter 5; while in Appendix B an overview on the experimental testbed of the Laboratory of Automation of University of Bologna, is reported to validated the approach presented in chapter 3, chapter 4 and chapter 5. In Appendix C some components model used in chapter 5 for formal verification are reported.

Psychiatric comorbidity, Restless Legs Syndrome and Nocturnal Eating Disorder: a case-control study

Objective: to evaluate the psychopathological profile in primary Restless Legs Syndrome (p-RLS) patients with and without nocturnal eating disorder (NED), analysing obsessive-compulsive traits, mood and anxiety disorder, and the two domains of personality proposed by Cloninger, temperament and character. Methods: we tested ten p-RLS patients without NED, ten p-RLS patients with NED and ten healthy control subjects, age and sex-matched, using Hamilton Depression and Anxiety Rating Scales, State-Trait Anxiety Inventory, Maudsley Obsessive Compulsive Inventory (MOCI) and Temperament and Character Inventory - revised (TCI). Results: p-RLS patients, particularly those with NED, had increased anxiety factor scores. MOCI-total, doubting and checking compulsion, and TCI-harm avoidance scores were significantly higher in p-RLS patients with NED. p-RLS patients without NED had significantly higher MOCI-doubting scores and a trend toward higher checking compulsion and harm avoidance scores with an apparent grading from controls to p-RLS patients without NED to p-RLS with NED. Conclusions: higher harm avoidance might predispose to display obsessive-compulsive symptoms, RLS and then, with increasing severity, compulsive nocturnal eating. RLS and NED could represent a pathological continuum in which a dysfunction in the limbic system, possibly driven by a dopaminergic dysfunction, could be the underlying pathophysiological mechanism.

Fault detection, diagnosis and active fault tolerant control for a satellite attitude control system

Modern control systems are becoming more and more complex and control algorithms more and more sophisticated. Consequently, Fault Detection and Diagnosis (FDD) and Fault Tolerant Control (FTC) have gained central importance over the past decades, due to the increasing requirements of availability, cost efficiency, reliability and operating safety. This thesis deals with the FDD and FTC problems in a spacecraft Attitude Determination and Control System (ADCS). Firstly, the detailed nonlinear models of the spacecraft attitude dynamics and kinematics are described, along with the dynamic models of the actuators and main external disturbance sources. The considered ADCS is composed of an array of four redundant reaction wheels. A set of sensors provides satellite angular velocity, attitude and flywheel spin rate information. Then, general overviews of the Fault Detection and Isolation (FDI), Fault Estimation (FE) and Fault Tolerant Control (FTC) problems are presented, and the design and implementation of a novel diagnosis system is described. The system consists of a FDI module composed of properly organized model-based residual filters, exploiting the available input and output information for the detection and localization of an occurred fault. A proper fault mapping procedure and the nonlinear geometric approach are exploited to design residual filters explicitly decoupled from the external aerodynamic disturbance and sensitive to specific sets of faults. The subsequent use of suitable adaptive FE algorithms, based on the exploitation of radial basis function neural networks, allows to obtain accurate fault estimations. Finally, this estimation is actively exploited in a FTC scheme to achieve a suitable fault accommodation and guarantee the desired control performances. A standard sliding mode controller is implemented for attitude stabilization and control. Several simulation results are given to highlight the performances of the overall designed system in case of different types of faults affecting the ADCS actuators and sensors.

Men's Modesty, Religion, and the State: Spaces of Collision

This article examines religious practices in the United States, which govern modesty and other dress norms for men. I focus both on the spaces within which they most collide with regulatory regimes of the state and the legal implications of these norms, particularly for observant Muslim men. Undergirding the research are those ‘‘gender equality’’ claims made by many religious adherents, that men are required to maintain proper modesty norms just as are women. Also undergirding the research is the extensive anti-Islam bias in American culture today. The spaces within which men’s religiously proscribed dress and grooming norms are most at issue—indicated by First Amendment legal challenges to rights of religious practice—are primarily those state-controlled, total institutions Goffman describes, such as in the military and prisons. The implications of gendered modesty norms are important, as state control over religious expression in prisons, for example, is much more difficult to contest than in other spaces, although this depends entirely on who is doing the contesting and within which religious context. In American society today—and particularly within the context of growing Islamaphobia following the 9/11 attacks—the implications are greatest for those men practicing ‘‘prison Islam.’’

The Constitutional-Judicial Control of the Legislative and Executive Powers in Central and Eastern European Countries

This project looked at the nature, contents, methods, means and legal and political effects of the influence that constitutional courts exercise upon the legislative and executive powers in the newly established democracies of Central and Eastern Europe. The basic hypothesis was that these courts work to provide a limitation of political power within the framework of the principal constitutional values and that they force the legislature and executive to exercise their powers and duties in strict accordance with the constitution. Following a study of the documentary sources, including primarily the relevant constitutional and statutory provisions and decisions of constitutional courts, Mr. Cvetkovski prepared a questionnaire on various aspects of the topics researched and sent it to the respective constitutional courts. A series of direct interviews with court officials in six of the ten countries then served to clarify a large number of questions relating to differences in procedures etc. that arose from the questionnaires. As a final stage, the findings were compared with those described in recent publications on constitutional control in general and in Central and Eastern Europe in particular. The study began by considering the constitutional and political environment of the constitutional courts' activities in controlling legislative and executive powers, which in all countries studied are based on the principles of the rule of law and the separation of powers. All courts are separate bodies with special status in terms of constitutional law and are independent of other political and judicial institutions. The range of matters within their jurisdiction is set by the constitution of the country in question but in all cases can be exercised only with the framework of procedural rules. This gives considerable significance to the question of who sets these rules and different countries have dealt with it in different ways. In some there is a special constitutional law with the same legal force as the constitution itself (Croatia), the majority of countries allow for regulation by an ordinary law, Macedonia gives the court the autonomy to create and change its own rules of procedure, while in Hungary the parliament fixes the rules on procedure at the suggestion of the constitutional court. The question of the appointment of constitutional judges was also considered and of the mechanisms for ensuring their impartiality and immunity. In the area of the courts' scope for providing normative control, considerable differences were found between the different countries. In some cases the courts' jurisdiction is limited to the normative acts of the respective parliaments, and there is generally no provision for challenging unconstitutional omissions by legislation and the executive. There are, however, some situations in which they may indirectly evaluate the constitutionality of legislative omissions, as when the constitution contains provision for a time limit on enacting legislation, when the parliament has made an omission in drafting a law which violates the constitutional provisions, or when a law grants favours to certain groups while excluding others, thereby violating the equal protection clause of the constitution. The control of constitutionality of normative acts can be either preventive or repressive, depending on whether it is implemented before or after the promulgation of the law or other enactment being challenged. In most countries in the region the constitutional courts provide only repressive control, although in Hungary and Poland the courts are competent to perform both preventive and repressive norm control, while in Romania the court's jurisdiction is limited to preventive norm control. Most countries are wary of vesting constitutional courts with preventive norm control because of the danger of their becoming too involved in the day-to-day political debate, but Mr. Cvetkovski points out certain advantages of such control. If combined with a short time limit it can provide early clarification of a constitutional issue, secondly it avoids the problems arising if a law that has been in force for some years is declared to be unconstitutional, and thirdly it may help preserve the prestige of the legislation. Its disadvantages include the difficulty of ascertaining the actual and potential consequences of a norm without the empirical experience of the administration and enforcement of the law, the desirability of a certain distance from the day-to-day arguments surrounding the political process of legislation, the possible effects of changing social and economic conditions, and the danger of placing obstacles in the way of rapid reactions to acute situations. In the case of repressive norm control, this can be either abstract or concrete. The former is initiated by the supreme state organs in order to protect abstract constitutional order and the latter is initiated by ordinary courts, administrative authorities or by individuals. Constitutional courts cannot directly oblige the legislature and executive to pass a new law and this remains a matter of legislative and executive political responsibility. In the case of Poland, the parliament even has the power to dismiss a constitutional court decision by a special majority of votes, which means that the last word lies with the legislature. As the current constitutions of Central and Eastern European countries are newly adopted and differ significantly from the previous ones, the courts' interpretative functions should ensure a degree of unification in the application of the constitution. Some countries (Bulgaria, Hungary, Poland, Slovakia and Russia) provide for the constitutional courts' decisions to have a binding role on the constitutions. While their decisions inevitably have an influence on the actions of public bodies, they do not set criteria for political behaviour, which depends rather on the overall political culture and traditions of the society. All constitutions except that of Belarus, provide for the courts to have jurisdiction over conflicts arising from the distribution of responsibilities between different organs and levels in the country, as well for impeachment procedures against the head of state, and for determining the constitutionality of political parties (except in Belarus, Hungary, Russia and Slovakia). All the constitutions studied guarantee individual rights and freedoms and most courts have jurisdiction over complaints of violation of these rights by the constitution. All courts also have some jurisdiction over international agreements and treaties, either directly (Belarus, Bulgaria and Hungary) before the treaty is ratified, or indirectly (Croatia, Czech Republic, Macedonia, Romania, Russia and Yugoslavia). In each country the question of who may initiate proceedings of norm control is of central importance and is usually regulated by the constitution itself. There are three main possibilities: statutory organs, normal courts and private individuals and the limitations on each of these is discussed in the report. Most courts are limited in their rights to institute ex officio a full-scale review of a point of law, and such rights as they do have rarely been used. In most countries courts' decisions do not have any binding force but must be approved by parliament or impose on parliament the obligation to bring the relevant law into conformity within a certain period. As a result, the courts' position is generally weaker than in other countries in Europe, with parliament remaining the supreme body. In the case of preventive norm control a finding of unconstitutionality may act to suspend the law and or to refer it back to the legislature, where in countries such as Romania it may even be overturned by a two-thirds majority. In repressive norm control a finding of unconstitutionality generally serves to take the relevant law out of legal force from the day of publication of the decision or from another date fixed by the court. If the law is annulled retrospectively this may or may not bring decisions of criminal courts under review, depending on the provisions laid down in the relevant constitution. In cases relating to conflicts of competencies the courts' decisions tend to be declaratory and so have a binding effect inter partes. In the case of a review of an individual act, decisions generally become effective primarily inter partes but is the individual act has been based on an unconstitutional generally binding normative act of the legislature or executive, the findings has quasi-legal effect as it automatically initiates special proceedings in which the law or other regulation is to be annulled or abrogated with effect erga omnes. This wards off further application of the law and thus further violations of individual constitutional rights, but also discourages further constitutional complaints against the same law. Thus the success of one individual's complaint extends to everyone else whose rights have equally been or might have been violated by the respective law. As the body whose act is repealed is obliged to adopt another act and in doing so is bound by the legal position of the constitutional court on the violation of constitutionally guaranteed freedoms and rights of the complainant, in this situation the decision of the constitutional court has the force of a precedent.

The evaluation of the oxidative state of low-density lipoproteins in intrauterine growth restriction and preeclampsia

To evaluate the oxidative state of lipoproteins in pregnancies complicated by intrauterine growth restriction (IUGR) in comparison to preeclampsia (PE) and healthy pregnant control subjects (CN).

SIGNALING MECHANISMS THAT CONTROL GAP JUNCTIONAL COUPLING BETWEEN RETINAL NEURONS

Gap junctions between neurons form the structural substrate for electrical synapses. Connexin 36 (Cx36, and its non-mammalian ortholog connexin 35) is the major neuronal gap junction protein in the central nervous system (CNS), and contributes to several important neuronal functions including neuronal synchronization, signal averaging, network oscillations, and motor learning. Connexin 36 is strongly expressed in the retina, where it is an obligatory component of the high-sensitivity rod photoreceptor pathway. A fundamental requirement of the retina is to adapt to broadly varying inputs in order to maintain a dynamic range of signaling output. Modulation of the strength of electrical coupling between networks of retinal neurons, including the Cx36-coupled AII amacrine cell in the primary rod circuit, is a hallmark of retinal luminance adaptation. However, very little is known about the mechanisms regulating dynamic modulation of Cx36-mediated coupling. The primary goal of this work was to understand how cellular signaling mechanisms regulate coupling through Cx36 gap junctions. We began by developing and characterizing phospho-specific antibodies against key regulatory phosphorylation sites on Cx36. Using these tools we showed that phosphorylation of Cx35 in fish models varies with light adaptation state, and is modulated by acute changes in background illumination. We next turned our focus to the well-studied and readily identifiable AII amacrine cell in mammalian retina. Using this model we showed that increased phosphorylation of Cx36 is directly related to increased coupling through these gap junctions, and that the dopamine-stimulated uncoupling of the AII network is mediated by dephosphorylation of Cx36 via protein kinase A-stimulated protein phosphatase 2A activity. We then showed that increased phosphorylation of Cx36 on the AII amacrine network is driven by depolarization of presynaptic ON-type bipolar cells as well as background light increments. This increase in phosphorylation is mediated by activation of extrasynaptic NMDA receptors associated with Cx36 gap junctions on AII amacrine cells and by Ca2+-calmodulin-dependent protein kinase II activation. Finally, these studies indicated that coupling is regulated locally at individual gap junction plaques. This work provides a framework for future study of regulation of Cx36-mediated coupling, in which increased phosphorylation of Cx36 indicates increased neuronal coupling.

An empirical examination of relative profitability in the nursing facility industry between ownership form and regionality in the state of Texas

The purpose of this research is to examine the relative profitability of the firm within the nursing facility industry in Texas. An examination is made of the variables expected to affect profitability and of importance to the design and implementation of regulatory policy. To facilitate this inquiry, specific questions addressed are: (1) Do differences in ownership form affect profitability (defined as operating income before fixed costs)? (2) What impact does regional location have on profitability? (3) Do patient case-mix and access to care by Medicaid patients differ between proprietary and non-profit firms and facilities located in urban versus rural regions, and what association exists between these variables and profitability? (4) Are economies of scale present in the nursing home industry? (5) Do nursing facilities operate in a competitive output market characterized by the inability of a single firm to exhibit influence over market price?^ Prior studies have principally employed a cost function to assess efficiency differences between classifications of nursing facilities. The inherent weakness in this approach is that it only considers technical efficiency. Not both technical and price efficiency which are the two components of overall economic efficiency. One firm is more technically efficient compared to another if it is able to produce a given quantity of output at the least possible costs. Price efficiency means that scarce resources are being directed towards their most valued use. Assuming similar prices in both input and output markets, differences in overall economic efficiency between firm classes are assessed through profitability, hence a profit function.^ Using the framework of the profit function, data from 1990 Medicaid Costs Reports for Texas, and the analytic technique of Ordinary Least Squares Regression, the findings of the study indicated (1) similar profitability between nursing facilities organized as for-profit versus non-profit and located in urban versus rural regions, (2) an inverse association between both payor-mix and patient case-mix with profitability, (3) strong evidence for the presence of scale economies, and (4) existence of a competitive market structure. The paper concludes with implications regarding reimbursement methodology and construction moratorium policies in Texas. ^