Construire l'avantage comparatif du Brésil? : la coordination dans les filiales soja du Mato Grosso et du Paraná

Ce mémoire propose une hypothèse alternative pour expliquer les facteurs à l’origine du boom du soja brésilien. En utilisant une approche combinant la théorie de l’organisation et l’économie politique institutionnelle, ce mémoire propose de comparer les modèles d’organisation de la chaîne de valeur soja des États du Mato Grosso et du Paraná. Dans un premier temps, cette recherche est guidée par un souci de documenter les rouages propres à chaque mode d’organisation et de catégoriser ces derniers comme des systèmes à part entière et cohérents. Ainsi, le mode de coordination du Mato Grosso (intégration de la chaîne de valeur) peut être qualifié de modèle hybride se rapprochant davantage du pôle hiérarchie tandis que le mode d’organisation du Paraná (coopérative agroindustrielle) peut être qualifié de mode hybride gravitant davantage vers le pôle marché. La nature des risques est identifiée comme principal déterminant du degré de centralisation de la gouvernance au sein de ces modèles. L’argument soutient que chaque mode de coordination est performant car il est adapté aux conditions locales de production et permet de mitiger les risques propres à chaque région de façon à encourager les échanges économiques. Dans un deuxième temps, cette recherche serait incomplète sans une analyse des facteurs politiques et historiques ayant influencé la trajectoire de développement de chaque région. Ainsi, chaque étude de cas présente un récit détaillé de l’évolution des politiques agraires et des institutions depuis les années 1960, soit le moment où la culture commerciale du soja a commencé à gagner en importance au Brésil. Analyser le changement institutionnel depuis 1960 est primordial pour comprendre comment se sont consolidées les règles du jeu qui sous-tendent aujourd’hui chaque mode de coordination.

Trois essais en macroéconomie

Les fluctuations économiques représentent les mouvements de la croissance économique. Celle-ci peut connaître des phases d'accélération (expansion) ou de ralentissement (récession), voire même de dépression si la baisse de production est persistente. Les fluctuations économiques sont liées aux écarts entre croissance effective et croissance potentielle. Elles peuvent s'expliquer par des chocs d'offre et demande, ainsi que par le cycle du crédit. Dans le premier cas, les conditions de la production se trouvent modifiées. C'est le cas lorsque le prix des facteurs de production (salaires, prix des matières premières) ou que des facteurs externes influençant le prix des produits (taux de change) évolue. Ainsi, une hausse du prix des facteurs de production provoque un choc négatif et ralentit la croissance. Ce ralentissement peut être également dû à un choc de demande négatif provoqué par une hausse du prix des produits causée par une appréciation de la devise, engendrant une diminution des exportations. Le deuxième cas concerne les variables financières et les actifs financiers. Ainsi, en période d'expansion, les agents économiques s'endettent et ont des comportements spéculatifs en réaction à des chocs d'offre ou demande anticipés. La valeur des titres et actifs financiers augmente, provoquant une bulle qui finit par éclater et provoquer un effondrement de la valeur des biens. Dès lors, l'activité économique ne peut plus être financée. C'est ce qui génère une récession, parfois profonde, comme lors de la récente crise financière. Cette thèse inclut trois essais sur les fluctuations macroéconomiques et les cycles économiques, plus précisément sur les thèmes décrit ci-dessus. Le premier chapitre s'intéresse aux anticipations sur la politique monétaire et sur la réaction des agents écononomiques face à ces anticipations. Une emphase particulière est mise sur la consommation de biens durables et l'endettement relié à ce type de consommation. Le deuxième chapitre aborde la question de l'influence des variations du taux de change sur la demande de travail dans le secteur manufacturier canadien. Finalement, le troisième chapitre s'intéresse aux retombées économiques, parfois négatives, du marché immobilier sur la consommation des ménages et aux répercussions sur le prix des actifs immobiliers et sur l'endettement des ménages d'anticipations infondées sur la demande dans le marché immobilier. Le premier chapitre, intitulé ``Monetary Policy News Shocks and Durable Consumption'', fournit une étude sur le lien entre les dépenses en biens durables et les chocs monétaires anticipés. Nous proposons et mettons en oeuvre une nouvelle approche pour identifier les chocs anticipés (nouvelles) de politique monétaire, en les identifiant de manière récursive à partir des résidus d’une règle de Taylor estimée à l’aide de données de sondage multi-horizon. Nous utilisons ensuite les chocs anticipés inférer dans un modèle autorégressif vectoriel structurel (ARVS). L’anticipation d’une politique de resserrement monétaire mène à une augmentation de la production, de la consommation de biens non-durables et durables, ainsi qu’à une augmentation du prix réel des biens durables. Bien que les chocs anticipés expliquent une part significative des variations de la production et de la consommation, leur impact est moindre que celui des chocs non-anticipés sur les fluctuations économiques. Finalement, nous menons une analyse théorique avec un modèle d’équilibre général dynamique stochastique (EGDS) avec biens durables et rigidités nominales. Les résultats indiquent que le modèle avec les prix des biens durables rigides peut reproduire la corrélation positive entre les fonctions de réponse de la consommation de biens non-durables et durables à un choc anticipé de politique monétaire trouvées à l’aide du ARVS. Le second chapitre s'intitule ``Exchange Rate Fluctuations and Labour Market Adjustments in Canadian Manufacturing Industries''. Dans ce chapitre, nous évaluons la sensibilité de l'emploi et des heures travaillées dans les industries manufacturières canadiennes aux variations du taux de change. L’analyse est basée sur un modèle dynamique de demande de travail et utilise l’approche en deux étapes pour l'estimation des relations de cointégration en données de panel. Nos données sont prises d’un panel de 20 industries manufacturières, provenant de la base de données KLEMS de Statistique Canada, et couvrent une longue période qui inclut deux cycles complets d’appréciation-dépréciation de la valeur du dollar canadien. Les effets nets de l'appréciation du dollar canadien se sont avérés statistiquement et économiquement significatifs et négatifs pour l'emploi et les heures travaillées, et ses effets sont plus prononcés dans les industries davantage exposées au commerce international. Finalement, le dernier chapitre s'intitule ``Housing Market Dynamics and Macroprudential Policy'', dans lequel nous étudions la relation statistique suggérant un lien collatéral entre le marché immobilier and le reste de l'économique et si ce lien est davantage entraîné par des facteurs de demandes ou d'offres. Nous suivons également la littérature sur les chocs anticipés et examinons un cyle d'expansion-récession peut survenir de façon endogène la suite d'anticipations non-réalisées d'une hausse de la demande de logements. À cette fin, nous construisons un modèle néo-Keynésien au sein duquel le pouvoir d’emprunt du partie des consommateurs est limité par la valeur de leur patrimoine immobilier. Nous estimons le modèle en utilisant une méthode Bayésienne avec des données canadiennes. Nous évaluons la capacité du modèle à capter les caractéristiques principales de la consommation et du prix des maisons. Finalement, nous effectuons une analyse pour déterminer dans quelle mesure l'introduction d'un ratio prêt-à-la-valeur contracyclique peut réduire l'endettement des ménages et les fluctuations du prix des maisons comparativement à une règle de politique monétaire répondant à l'inflation du prix des maisons. Nous trouvons une relation statistique suggérant un important lien collatéral entre le marché immobilier et le reste de l'économie, et ce lien s'explique principalement par des facteurs de demande. Nous constatons également que l'introduction de chocs anticipés peut générer un cycle d'expansion-récession du marché immobilier, la récession faisant suite aux attentes non-réalisées par rapport à la demande de logements. Enfin, notre étude suggère également qu'un ratio contracyclique de prêt-à-la-valeur est une politique utile pour réduire les retombées du marché du logement sur la consommation par l'intermédiaire de la valeur garantie.

Perspectives de l'usage de poudre de jaunes d’oeuf comme additif alimentaire contre Campylobacter jejuni chez le poulet : mode d'immunisation et effet de l’encapsulation

La campylobactériose est une zoonose causée par Campylobacter jejuni, une bactérie commensale du poulet, considérée comme la principale source de contamination humaine. C. jejuni est rarement retrouvé dans le tube digestif des poulets avant deux ou trois semaines d'âge. Ce qui pourrait s'expliquer par la transmission d'une immunité maternelle (anticorps IgY) transmise aux poussins via le jaune d'œuf. À la Chaire de recherche en Salubrité des Viandes (CRSV), la caractérisation d'anticorps IgY extraits de jaunes d'œufs frais a montré des niveaux de production d’anticorps différents selon le mode d’immunisation et suggère, in vitro, des effets sur ce pathogène. Ce qui laisse penser qu'en tant qu'additif alimentaire, une poudre de jaunes d'œuf potentialisée permettrait de lutter contre C. jejuni chez le poulet à griller. Dans ce travail, le processus de fabrication de l'additif (déshydratation par « Spray dry » puis encapsulation) a été évalué et les différents modes d'immunisation des poules pondeuses ont également été comparés. Les anticorps ont été extraits des différentes poudres de jaunes d'œuf ou du produit final encapsulé, et caractérisés in vitro (dosage / ELISA, test de mobilité, bactéricidie, western blot). Puis, une évaluation in vivo de la capacité de ces poudres encapsulées, incorporée à 5 % dans la moulée, afin de réduire ou de bloquer la colonisation intestinale des oiseaux par C. jejuni a été testée. In vitro, les résultats ont montré des concentrations d'anticorps et d'efficacité variables selon le type de vaccination. Dans cette étude, on a observé que le « Spray dry » a concentré les anticorps dans les poudres et que ces anticorps sont restés fonctionnels contre C. jejuni. On a également observé que l'encapsulation n’entraîne pas une perte quantitative des anticorps contenus dans les poudres. Malgré les résultats in vitro encourageants, les résultats in vivo ne révèlent aucune inhibition ou réduction de la colonisation des oiseaux par C. jejuni. L’absence d’efficacité la poudre de jaunes d’œuf encapsulée dans notre étude n’est pas due à une perte quantitative et/ou qualitative des anticorps comme soutenu dans les expériences in vitro. Ce qui démontre que les recherches doivent être poursuivies afin de déterminer les conditions optimales de l'utilisation de la poudre de jaune d'œuf in vivo, en tant qu'additif alimentaire chez les poulets

Non-Destructive Evaluation of Ion-Implanted Semiconductor Thin Films Using Photothermal Deflections Spectroscopy

Materials and equipment which fail to achieve the design requirements or projected life due to undetected defects may require expensive repair or early replacement. Such defects may also be the cause of unsafe conditions or catastrophic unexpected failure, and will lead to loss of revenue due to plant shutdown. Non-Destructive Evaluation (NDE) / Non Destructive Testing (NDT) is used for the examination of materials and components without changing or destroying their usefulness. NDT can be applied to each stage of a system’s construction, to monitor the integrity of the system or structure throughout its life.

Engineering the Properties of Indium Sulfide for Thin Film Solar Cells by Doping

In the present work, structural, optical and electrical properties of indium sulfide are tuned by specific and controlled doping. Silver, tin, copper and chlorine were used as the doping elements. In2S3 thin films for the present study were prepared using a simple and low cost “Chemical Spray Pyrolysis (CSP)” technique. This technique is adaptable for large-area deposition of thin films in any required shape and facilitates easiness of doping and/or variation of atomic ratio. It involves spraying a solution, usually aqueous, containing soluble salts of the constituents of the desired compound onto a heated substrate. Doping process was optimized for different doping concentrations. On optimizing doping conditions, we tuned the structural, optical and electrical properties of indium sulfide thin films making them perform as an ideal buffer layer.

CuInS2 thin films using chemical methods for the fabrication of CuInS2/CdS solar cells

Dept.of Physics, Cochin University of Science and Technology

Utilisation of Coir Geotextiles for Unpaved Roads and Embankments

The increasing tempo of construction activity the world over creates heavy pressure on existing land space. The quest for new and competent site often points to the needs for improving existing sites, which are otherwise deemed unsuitable for adopting conventional foundations. This is accomplished by ground improvement methods, which are employed to improve the quality of soil incompetent in their natural state. Among the construction activities, a well-connected road network is one of the basic infrastructure requirements, which play a vital role for the fast and comfortable movement of inter- regional traffic in countries like India.One of the innovative ground improvement techniques practised all over the world is the use of geosynthetics, which include geotextiles, geomembranes, geogrids, etc . They offer the advantages such as space saving, enviromnental sensitivity, material availability, technical superiority, higher cost savings, less construction time, etc . Because of its fundamental properties, such as tensile strength, filtering and water permeability, a geotextile inserted between the base material and sub grade can function as reinforcement, a filter medium, a separation layer and as a drainage medium. Though polymeric geotextiles are used in abundant quantities, the use of natural geotextiles (like coir, jute, etc.) has yet to get momentum. This is primarily due to the lack of research work on natural geotextilcs for ground improvement, particularly in the areas of un paved roads. Coir geotextiles are best suited for low cost applications because of its availability at low prices compared to its synthetic counterparts. The proper utilisation of coir geotextilcs in various applications demands large quantities of the product, which in turn can create a boom in the coir industry. The present study aims at exploring the possibilities of utilising coir geotextiles for unpaved roads and embankments.The properties of coir geotextiles used have been evaluated. The properties studied include mass per unit area, puncture resistance, tensile strength, secant modulus, etc . The interfacial friction between soils and three types of coir geotextiles used was also evaluated. It was found that though the parameters evaluated for coir geotextiles have low values compared to polymeric geotextiles, the former are sufficient for use in unpaved roads and embankments. The frictional characteristics of coir geotextile - soil interfaces are extremely good and satisfy the condition set by the International Geosynthetic Society for varied applications.The performance of coir geotextiles reinforced subgrade was studied by conducting California Bearing Ratio (CBR) tests. Studies were made with coir geotextiles placed at different levels and also in multiple layers. The results have shown that the coir geotextile enhances the subgrade strength. A regression analysis was perfonned and a mathematical model was developed to predict the CBR of the coir geotextile reinforced subgrade soil as a function of the soil properties, coir geotextile properties, and placement depth of reinforcement.The effects of coir geotextiles on bearing capacity were studied by perfonning plate load tests in a test tan1e This helped to understand the functioning of geotextile as reinforcement in unpaved roads and embankments. The perfonnance of different types of coir geotextiles with respect to the placement depth in dry and saturated conditions was studied. The results revealed that the bearing capacity of coir-reinforced soil is increasing irrespective of the type of coir geotextiles and saturation condition.The rut behaviour of unreinforced and coir reinforced unpaved road sections were compared by conducting model static load tests in a test tank and also under repetitive loads in a wheel track test facility. The results showed that coir geotextiles could fulfill the functions as reinforcement and as a separator, both under static and repetitive loads. The rut depth was very much reduced whik placing coir geotextiles in between sub grade and sub base.In order to study the use of Coir geotextiles in improving the settlement characteristics, two types of prefabricated COlf geotextile vertical drains were developed and their time - settlement behaviour were studied. Three different dispositions were tried. It was found that the coir geotextile drains were very effective in reducing consolidation time due to radial drainage. The circular drains in triangular disposition gave maximum beneficial effect.In long run, the degradation of coir geotextile is expected, which results in a soil - fibre matrix. Hence, studies pertaining to strength and compressibility characteristics of soil - coir fibre composites were conducted. Experiments were done using coir fibres having different aspect ratios and in different proportions. The results revealed that the strength of the soil was increased by 150% to 200% when mixed with 2% of fibre having approximately 12mm length, at all compaction conditions. Also, the coefficient of consolidation increased and compression index decreased with the addition of coir fibre.Typical design charts were prepared for the design of coir geotextile reinforced unpaved roads. Some illustrative examples are also given. The results demonstrated that a considerable saving in subase / base thickness can he achieved with the use of eoir geotextiles, which in turn, would save large quantities of natural aggregates.

Investigations on the structural, optical and Magnetic properties of nanostructured cerium oxide in pure and doped forms and its polymer nanocomposiets

This thesis Entitled INVESTIGATIONS ON THE STRUCTURAL, OPTICAL AND MAGNETIC PROPERTIES OF NANOSTRUCTURED CERIUM OXIDE IN PURE AND DOPED FORMS AND ITS POLYMER NANOCOMPOSITES.Synthesis and processing of nanomatelials and nanostmctures are the essential aspects of nanotechnology. Studies on new physical properties and applications of nanomaterials and nanostructures are possible only when nanostructured materials are made available with desired size, morphology,crystal structure and chemical composition.Recently, several methods have been developed to prepare pure and doped CeO2 powder, including wet chemical synthesis, thermal hydrolysis, flux method, hydrothermal synthesis, gas condensation method, microwave technique etc. In all these, some special reaction conditions, such as high temperature, high pressure, capping agents, expensive or toxic solvents etc. have been involved.Another hi gh-li ght of the present work is room temperature ferromagnetism in cerium oxdie thin films deposited by spray pyrolysis technique.The observation of self trapped exciton mediated PL in ceria nanocrystals is another important outcome of the present study. STE mediated mechanism has been proposed for CeO2 nanocrystals based on the dependence of PL intensity on the annealing temperature. It would be interesting to extent these investigations to the doped forms of cerium oxide and cerium oxide thin films to get deeper Insight into STE mechanism.Due to time constraints detailed investigations could not be canied out on the preparation and properties of free standing films of polymer/ceria nanocomposites. It has been observed that good quality free standing films of PVDF/ceria, PS/C61‘l8, PMMA/ceria can be obtained using solution casting technique. These polymer nanocomposite films show high dielectric constant around 20 and offer prospects of applications as gate electrodes in metal-oxide semiconductor devices.

Prospects of sprayed CZTS thin film solar cells from the perspective of material characterization and device performance

This thesis is devoted to the development of a relatively new, rapidly developing quaternary semiconducting material (viz., Cu2ZnSnS4) used for photovoltaic applications. This semiconductor, commonly known as CZTS, is closely related to a family of materials that have been used for solar cell applications. It is a compound semiconductor made of copper, zinc, tin and sulfur, which are sufficiently abundant elements; none of them is harmful to the environment even at large scale usage. Aim of this study is to fabricate CZTS solar cells through chemical spray pyrolysis (CSP) technique. At first the influence of various spray parameters like substrate temperature, spray rate, precursor ratio etc. on the opto-electronic properties of CZTS films will be studied in detail. Then the fabrication of CZTS/In2S3 hetero junctions and various ways to improve the performance parameters will be tried

Structural, electrical and electrochemical characterization of high frequency magnetron sputtered spinel oxide cathode films for lithium ion battery applications

The main challenges in the deposition of cathode materials in thin film form are the reproduction of stoichiometry close to the bulk material and attaining higher rates of deposition and excellent crystallinity at comparatively lower annealing temperatures. There are several methods available to develop stoichiometric thin film cathode materials including pulsed laser deposition; plasma enhanced chemical vapor deposition, electron beam evaporation, electrostatic spray deposition and RF magnetron sputtering. Among them the most versatile method is the sputtering technique, owing to its suitability for micro-fabricating the thin film batteries directly on chips in any shape or size, and on flexible substrates, with good capacity and cycle life. The main drawback of the conventional sputtering technique using RF frequency of 13.56MHz is its lower rate of deposition, compared to other deposition techniques A typical cathode layer for a thin film battery requires a thickness around one micron. To deposit such thick layers using convention RF sputtering, longer time of deposition is required, since the deposition rate is very low, which is typically 10-20 Å/min. This makes the conventional RF sputtering technique a less viable option for mass production in an economical way. There exists a host of theoretical and experimental evidences and results that higher excitation frequency can be efficiently used to deposit good quality films at higher deposition rates with glow discharge plasma. The effect of frequencies higher than the conventional one (13.56MHz) on the RF magnetron sputtering process has not been subjected to detailed investigations. Attempts have been made in the present work, to sputter deposit spinel oxide cathode films, using high frequency RF excitation source. Most importantly, the major challenge faced by the thin film battery based on the LiMn2O4 cathode material is the poor capacity retention during charge discharge cycling. The major causes for the capacity fading reported in LiMn2O4cathode materials are due to, Jahn-Teller distortion, Mn2+ dissolution into the electrolyte and oxygen loss in cathode material during cycling. The work discussed in this thesis is an attempt on overcoming the above said challenges and developing a high capacity thin film cathode material.

Studies On The Electrical Properties Of Some Crystalline Organic Compounds And Conducting Polymers

Solid electrolytes for applications like chemical sensing, energy storage, and conversion have been actively investigated and developed since the early sixties. Although of immense potential, solid state protonic conductors have been ignored in comparison with the great interest that has been shown to other ionic conductors like lithium and silver ion conductors. The non-availability of good, stable protonic conductors could be partly the reason for this situation. Although organic solids are better known for their electrical insulating character, ionic conductors of organic origin constitute a recent addition to the class of ionic conductors. However, detailed studies (N1 such conductors are scarce. Also the last decade has witnessed an unprecedented boom in research on organic "conducting polymers". These newly devised materials show conductivity spanning from insulator to metallic regimes, which can be manipulated by appropriate chemical treatment. They find applications in devices ranging from rechargeable batteries to "smart windows". This thesis mainly deals with the synthesis and investigations on the electrical properties of (i) certain organbc protonic conductors derived from ethylenediamine and (ii) substituted polyanilines

Role of sea-surface wind and transport on enhanced aerosol optical depth observed over the Arabian Sea

The objective of this study is to understand the reasons for the enhancement in aerosol optical depth (AOD) over the Arabian Sea observed during June, July and August. During these months, high values of AOD are found over the sea beyond 10◦ N and adjacent regions. The Arabian Sea is bounded by the lands of Asia and Africa on its three sides. So the region is influenced by transported aerosols from the surroundings as well as aerosols of local origin (marine aerosols). During the summer monsoon season in India, strong surface winds with velocities around 15 m s−1 are experienced over most parts of the Arabian Sea. These winds are capable of increasing sea spray activity, thereby enhancing the production of marine aerosols. The strong winds increase the contribution of marine aerosols over the region to about 60% of the total aerosol content. The main components of marine aerosols include sea salt and sulphate particles. The remaining part of the aerosol particles comes from the western and northern land masses around the sea, of which the main component is transported dust particles. This transport is observed at higher altitudes starting from 600 m. At low levels, the transport occurs mainly from the Indian Ocean and the Arabian Sea itself, indicating the predominance of marine aerosols at these levels. The major portion of the total aerosol loading was contributed by coarse-mode particles during the period of study. But in the winter season, the concentration of coarse-mode aerosols is found to be less. From the analysis, it is concluded that the increase in marine aerosols and dust particles transported from nearby deserts results in an increase in aerosol content over the Arabian Sea during June, July and August.

Non-destructive evaluation of photovoltaic materials and solar cells using Photoluminescence

Photoluminescence (PL) spectroscopy is an optical technique that has emerged successful in the field of semiconductor material and device characterization. This technique is quite a powerful one which gives idea about the defect levels in a material, the band gap of the material, composition as well as material quality. Over the recent years it has received an elevation as a mainstream characterization technique. This thesis is an attempt to characterize each individual layer used in a thin film solar cell with special focus on the electrical properties. This will be highly beneficial from the lab as well as industrial point of view because electrical measurements generally are contact mode measurements which tend to damage the surface. As far as a thin film solar cell is concerned, the constituent layers are the transparent conducting oxide (TCO), absorber layer, buffer layer and top electrode contact. Each layer has a specific role to play and the performance of a solar cell is decided and limited by the quality of each individual layer. Various aspects of PL spectroscopy have been employed for studying compound semiconductor thin films [deposited using chemical spray pyrolysis (CSP)] proposed for solar cell application. This thesis has been structured in to seven chapters

Conformal FDTD analysis of an Octagonal Microstrip Patch antenna

The recent boom in wireless communication industry, especially in the area of cellular telephony and wireless data communication, has led to the increased demand for multi band antennas. In such applications the issues to be addressed are, wide bandwidth and gain, while striving for miniature geometry. A dual frequency configuration useful in GSM1800 and Blue tooth, is one that operates with similar properties, both in terms of reflection and radiation characteristics, in the two bands of interest. Dual frequency operations can be realized by exciting the Microstrip Patch Antenna (MPA) using a single feed [1] or dual feed [2]. In this paper, Conformal FDTD[3] method with Perfect Magnetic Conductor (PMC) applied along the plane of symmetry [4] is used to study the characteristics of an Octagonal MPA. The theoretical results are compared against the experimental and IE3D™ simulated results

Role of chlorine on the opto-electronic properties of β-In2S3 thin films

Effect of chlorine doping on the opto-electronic properties of β-In2S3 thin film, deposited by spray pyrolysis technique is studied for the first time. Chlorine was incorporated in the spray solution, using HCl. Pristine sample prepared using In(NO3)3 and thiourea as the precursors showed very low photosensitivity. But upon adding optimum quantity of chlorine, the photosensitivity increased by 3 orders. X-ray analysis revealed that crystallinity was also increasing up to this optimum level of Cl concentration. It was also observed that samples with high photosensitivity were having higher band gap. The present study proved that doping with chlorine was beneficial as this could result in forming crystalline and photosensitive films of indium sulfide.