Soil mix technology for land remediation: Recent innovations

The past 15 years have seen increasing applications of soil mix technology in land remediation, mainly in stabilisation/solidification treatments and the construction of low-permeability cut-off walls and permeable reactive barriers; clear evidence of the versatility of the technology and its wide-ranging applications. This paper provides an overview of some of the recent innovations of soil mix technology in land remediation covering equipment developments and applications, including systems for rectangular panels and trenching systems, treatments, such as chemical oxidation, and additives, such as modified clays, zeolites and reactive magnesia. The paper also provides case studies for such innovations. The paper concludes with an overview of an on-going research and development project SMiRT (Soil Mix Remediation Technology) which will involve field trials on a contaminated site and will employ some of the innovations discussed in the paper. The range of significant advantages that soil mix technology now offers compared to other remediation techniques is likely to place this remediation method at the forefront of remedial options for future brownfield projects.

Pseudomonas duriflava sp nov., isolated from a desert soil

A Gram-negative, rod-shaped, non-motile, non-spore-forming bacterium, designated strain HR2(T) was isolated from a soil sample from the Talklimaken Desert in Xinjiang Province, China. Strain HR2(T) grew optimally at pH 7.0-8.0 and 30-37 degrees C in the presence of 0-1% (w/v) NaCl. An analysis of 16S rRNA gene sequences revealed that strain HR2(T) fell within the radiation of the genus Pseudomonas, the highest level of similarity being found with respect to Pseudomonas luteola IAM 13000(T) (97.5%); the levels of sequence similarity with respect to other recognized Pseudomonas species were < 96.4%. DNA-DNA hybridization showed that the genetic relatedness between strain HR2(T) and P. luteola IAM 13000(T) was 53.2%. The G + C content of the genomic DNA of strain HR2(T) was 55.2 mol%. The major fatty acids were 18: 1, summed feature 3 and 16:0. The hydroxylated fatty acids 10:0 3-OH, 12:0 3-OH and 12:0 2-OH were also present. The data obtained in this polyphasic study indicated that this isolate represents a novel species of the genus Pseudomonas, for which the name Pseudomonas duriflava sp. nov. is proposed, The type strain is HR2(T) (=KCTC 221129(T) =CGMCC 1.6858(T)).

Sphingobacterium siyangense sp nov., isolated from farm soil

The taxonomic position of a novel Gram-negative strain, designated Sy1(T), isolated from a farm-soil sample obtained from Jiangsu Province, PR China, was characterized by using a polyphasic approach. The cells were non-motile, non-spore-forming rods. The organism grew optimally at 30-37 degrees C and at pH 6.0-8.0. Based on 16S rRNA gene sequence analysis, strain Sy1(T) is a member of the genus Sphingobacterium; Sphingobacterium multivorum JCM 21156(T) was the nearest relative (98.5% sequence similarity). The predominant fatty acids of strain Sy1T were isoC15:0 (32.90/o), C16:0 (10.9%) and summed feature 3 (iso-C-15:0 2-OH and/or C-16:1 omega 7c; 24.1%). The DNA G + C content was 38.5 mol%. The low level of DNA-DNA relatedness (2.2 %) to S. multivorum JCM 21156 T in combination with differential morphological and biochemical properties demonstrated that strain SY1(T) (=KCTC 22131(T)= CGMCC 1.6855(T)) should be classified as representing a novel species of the genus Sphingobacterium for which the name Sphingobacterium siyangense sp. nov. is proposed.

Flavobacterium anhuiense sp nov., isolated from field soil

A novel strain, D3(T), isolated from a field-soil sample obtained from Anhui Province, PR China, was characterized taxonomically by using a polyphasic approach. The cells were Gram-negative, yellow-pigmented rods devoid of flagella, but showing gliding motility. The organism was able to grow at 5-37 degrees C and at pH 4.0-10.0. A comparative 16S rRNA gene sequence analysis indicated that strain D3(T) is a member of the genus Flavobacterium, sharing highest sequence similarity with the type strain of Flavobacterium defluvii (96.7 %). The major isoprenoid quinone was MK-6 and the predominant fatty acids were iso-C-15:0, summed feature 3 (C-16:1 omega 7c and/or iso-C-15:0 2-OH) and C-16:0. The DNA G + C content was 31.4 mol%. On the basis of phylogenetic and phenotypic data, strain D3(T) represents a novel species within the genus Flavobacterium, for which the name Flavobacterium anhuiense sp. nov. is proposed. The type strain is D3(T) (=KCTC 22128(T)= CGIVICC 1.6859(T)).

Bacillus solisalsi sp nov., a halotolerant, alkaliphilic bacterium isolated from soil around a salt lake

A novel Gram-positive, motile, rod-shaped bacterium isolated from a saline soil in China was characterized by a polyphasic taxonomic approach. The strain, designated YC1(T), was halotolerant [tolerating up to 15 % (w/v) NaCl] and alkaliphilic (growing at

Saccharibacillus kuerlensis sp nov., isolated from a desert soil

A taxonomic study was performed on strain HR1(T), which was isolated from a desert soil sample collected from Xinjiang Province (China). Cells were aerobic, Gram-positive-staining, pink-pigmented, sporulating rods with a single lateral flagellum. The orga

Effects of soil fabric on behaviors of granular soils: Microscopic modeling

The effects of initial soil fabric on behaviors of granular soils are investigated by using Distinct Element Method (DEM) numerical simulation. Soil specimens are represented by an assembly of non-uniform sized spheres with different initial contact normal distributions. Isotropically consolidated triaxial compression loading and extension unloading in both undrained and drained conditions are simulated for vertically- and horizontally-sheared specimens. The numerical simulation results are compared qualitatively with the published experimental data and the effects of initial soil fabric on resulting soil behaviors are discussed, including the effects of specimen reconstitution methods, effects of large preshearing, and anisotropic characteristics in undrained and drained conditions. The effects of initial soil fabric and mode of shearing on the quasi-steady state line are also investigated. The numerical simulation results can systematically explain that the observed experimental behaviors of granular soils are due principally to their conditions of the initial soil fabric. This outcome provides insights into the observed phenomena in microscopic view. © 2011 Elsevier Ltd.

Metal Retention Experiments for the Design of Soil-Mix Technology Permeable Reactive Barriers

Soil-mix technology is effective for the construction of permeable reactive barriers (PRBs) for in situ groundwater treatment. The objective of this study was to perform initial experiments for the design of soil-mix technology PRBs according to (i) sorption isotherm, (ii) reaction kinetics and (iii) mass balance of the contaminants. The four tested reactive systems were: (i) a granular zeolite (clinoptilolite-GZ), (ii) a granular organoclay (GO), (iii) a 1:1-mixture GZ and model sandy clayey soil and (iv) a 1:1:1-mixture of GZ, GO and model soil. The laboratory experiments consisted of batch tests (volume 900mL and sorbent mass 18g) with a multimetal solution of Pb, Cu, Zn, Cd and Ni. For the adsorption experiment, the initial concentrations ranged from 0.01 to 0.5mM (2.5 to 30mg/L). The maximum metal retention was measured in a batch test (300mg/L for each metal, volume 900mL, sorbent mass 90-4.5g). The reactive material efficiency order was found to be GZ>GZ-soil mix>GZ-soil-GO mix>GO. Langmuir isotherms modelled the adsorption, even in presence of a mixed cations solution. Adsorption was energetically favourable and spontaneous in all cases. Metals were removed according to the second order reaction kinetics; GZ and the 1:1-mix were very similar. The maximum retention capacity was 0.1-0.2mmol/g for Pb in the presence of clinoptilolite; for Cu, Zn, Cd and Ni, it was below 0.05mmol/g for the four reactive systems. Mixing granular zeolite, organoclay and model soil increased the chemisorption. Providing that GZ is reactive enough for the specific conditions, GZ can be mixed to obtain the required sorption. Granular clinoptilolite addition to soil is recommended for PRBs for metal contaminated groundwater. The laboratory experiments consisted of batch tests with a multimetal solution of Pb, Cu, Zn, Cd and Ni. The four reactive materials chosen were granular zeolite, clinoptilolite and model sandy clayey soil, granular organoclay and a mix of clinoptilolite, model soil and organoclay. The reactive material efficiency order was found to be granular clinoptilolite>clinoptilolite-soil mix>clinoptilolite-soil-organoclay mix>granular organoclay. © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Study on regional differences in soil-water characteristics and their relevance to aquaculture productivity and fish disease

A total of 45 ponds used for fish polyculture were investigated in three zones of Bangladesh to identify the differences among the zones in respect to aqua-ecology, culture practices, fish productivity and health management. Four hundred and fifty fish from three zones were clinically examined by naked eye and histopathology. Out of total number of fish examined, 45 fish from Dhaka zones were examined for parasites and bacteria in addition to histopathology. Faded and haemorrhagic gill, skin, fin, scale loss and lesions were observed during fish examination. Aeromonas spp. Pseudomonas spp. and Streptococcus spp. were isolated respectively from 56%, 46% and 39% affected fish. Among the five water quality parameters analyzed, the highest average hardness and alkalinity respectively were recorded in Rajshahi (156 ppm and 142 ppm) followed by Dhaka (146 ppm and 132 ppm) and Chittagong (81 ppm and 90 ppm). The highest average pH was recorded in Mymensingh (7.52) followed by Rajshahi (7.13) and Chittagong (7.05). Water holding capacity of soil in Rajshahi zone was poor compared to other zones and farmers were found to be reluctant to fish farming.

Cadmium leachability and microbial population dynamics in a stabilized and bioaugmented model contaminated soil

This article presents a laboratory study on the consequences of the application of combined soil stabilization and bioaugmentation in the remediation of a model contaminated soil. Stabilization and bioaugmentation are two techniques commonly applied independently for the remediation of heavy metal and organic contamination respectively. However, for a cocktail of contaminants combined treatments are currently being considered. The model soil was contaminated with a cocktail of organics and heavy metals based on the soil and contaminant conditions in a real contaminated site. The soil stabilization treatment was applied using either zeolite or green waste compost as additives and a commercially available hydrocarbon degrading microbial consortium was used for the bioaugmentation treatment. The effects of stabilization with or without bioaugmentation on the leachability of cadmium and copper was observed using an EU batch leaching test procedure and a flow-through column leaching test, both using deionized water at a pH of 5.6. In addition, the population of hydrocarbon degrading microorganisms was monitored using a modified plate count procedure in cases where bioaugmentation was applied. It was found that while the stabilization treatment reduced the metal leachability by up to 60%, the bioaugmentation treatment increased it by up to 100% Microbial survival was also higher in the stabilized soil samples.

Physics in fish processing technology

To design, develop and put into operation an equipment either to increase the productivity or to improve the existing technique to obtain a better quality of the product, the fishery engineer/scientist should have a comprehensive knowledge of fundamental principles involved in the process. Many a technique in fish processing technology, whether it applies to freezing, dehydration or canning, involves always a type of heat transfer, which is dependent to a certain extent on the external physical parameters like temperature. humidity, pressure, air flow etc. and also on the thermodynamic properties of fish muscle in the temperature ranges encountered. Similarly informations on other physical values like dielectric constant and dielectric loss in the design of quick trawlers and in quality assessment of frozen/iced fish, refractive index and viscosity in the measurement of the saturation and polymerisation of fish oils and shear strength in the judgement of textural qualities of cooked fish are also equally important.

Year-round and rotational freshwater prawn, Macrobrachium rosenbergii and paddy farming: soil quality, production and economics

A study was carried out at five upazillas (Dumuria, Fakirhat, Pirojpur sadar, Gopalgonj sadar and Kalia) of five southern districts of Khulna, Bagerhat, Pirojpur, Gopalgonj and Narail to understand the comparative production performance and any effect on soil quality in case of year-round golda (Macrobrachium rosenbergii), alternate prawn-paddy and year-round paddy farming. A direct interview of 55 farmers was taken, using pretested questionnaire, and soil samples were taken from selected farms before and after each crop. Among the five upazillas, farmers in Gopalgonj sadar and Kalia are not practicing year-round golda. Rotational golda-paddy farming has been recorded to result in maximum profit, with the highest of Tk. 310,912/ha/year in 2003 at Dumuria. Only paddy farming is less profitable than other two cropping patterns, irrespective of study sites. The nutrient status of soil in rotational golda and paddy farming has been found improved, compared to that of only golda or paddy farming.