Collaborative governance and innovation in social enterprises

While social enterprises have gained increasing policy attention as vehicles for generating innovative responses to complex social and environmental problems, surprisingly little is known about them. In particular, the social innovation produced by social enterprises (Mulgan, Tucker, Ali, & Sander, 2007) has been presumed rather than demonstrated, and remains under-investigated in the literature. While social enterprises are held to be inherently innovative as they seek to response to social needs (Nicholls, 2010), there has been conjecture that the collaborative governance arrangements typical in social enterprises may be conducive to innovation (Lumpkin, Moss, Gras, Kato, & Amezcua, In press), as members and volunteers provide a source of creative ideas and are unfettered in such thinking by responsibility to deliver organisational outcomes (Hendry, 2004). However this is complicated by the sheer array of governance arrangements which exist in social enterprises, which range from flat participatory democratic structures through to hierarchical arrangements. In continental Europe, there has been a stronger focus on democratic participation as a characteristic of Social Enterprises than, for example, the USA. In response to this gap in knowledge, a research project was undertaken to identify the population of social enterprises in Australia. The size, composition and the social innovations initiated by these enterprises has been reported elsewhere (see Barraket, 2010). The purpose of this paper is to undertake a closer examination of innovation in social enterprises – particularly how the collaborative governance of social enterprises might influence innovation. Given the pre-paradigmatic state of social entrepreneurship research (Nicholls, 2010), and the importance of drawing draw on established theories in order to advance theory (Short, Moss, & Lumpkin, 2009), a number of conceptual steps are needed in order to examine how collaborative governance might influence by social enterprises. In this paper, we commence by advancing a definition as to what a social enterprise is. In light of our focus on the potential role of collaborative governance in social innovation amongst social enterprises, we go on to consider the collaborative forms of governance prevalent in the Third Sector. Then, collaborative innovation is explored. Drawing on this information and our research data, we finally consider how collaborative governance might affect innovation amongst social enterprises.

TrainRoulette : promoting situated in-train social interaction between passengers

Travelling by public transport is usually regarded as boring and uninteresting. Refraining from talking to the stranger next to you may be due to limitations that are self-imposed and further corroborated by social expectations and cultural norms that govern behaviour in public space. Our design research into passenger interactions on board of urban commuter trains has informed the development of the TrainRoulette prototype – a mobile app for situated, real-time chats between train passengers. We study the impact of our design intervention on shaping perceptions of the train journey experience. Moreover, we are interested in the implications of such ICT-mediated interactions within train journeys for stimulating social offline interactions and new forms of passenger engagement.

Primary classroom teachers' use of social and emotional wellbeing programs and the factors influencing program use

There has been a rapid escalation in the development and evaluation of social and emotional well-being (SEW) programs in primary schools over the last few decades. Despite the plethora of programs available, primary teachers’ use of SEW programs is not well documented in Australian schools, with even less consideration of the factors influencing program use. A cross-sectional survey was undertaken with primary classroom teachers across twelve schools in the Brisbane and Sunshine Coast Education Districts in Queensland, Australia, during 2005. A checklist of SEW programs and an audit of SEW practices in schools were employed to investigate the number, range and types of SEW programs used by primary classroom teachers and the contextual factors influencing program use. Whilst the majority of implementation studies have been conducted under intervention conditions, this study was designed to capture primary classroom teachers’ day-to-day use of SEW programs and the factors influencing program use under real-world conditions. The findings of this research indicate that almost three quarters of the primary classroom teachers involved in the study reported using at least one SEW program during 2005. Wide variation in the number and range of programs used was evident, suggesting that teachers are autonomous in their use of SEW programs. Evidence-based SEW programs were used by a similar proportion of teachers to non-evidence-based programs. However, irrespective of the type of program used, primary teachers overwhelmingly reported using part of a SEW program rather than the whole program. This raises some issues about the quality of teachers’ program implementation in real-world practice, especially with respect to programs that are evidence-based. A content analysis revealed that a wide range of factors have been examined as potential influences on teachers’ implementation of health promotion programs in schools, including SEW programs, despite the limited number of studies undertaken to date. However, variation in the factors examined and study designs employed both within and across health promotion fields limited the extent to which studies could be compared. A methodological and statistical review also revealed substantial variation in the quality of reporting of studies. A variety of factors were examined as potential influences on primary classroom teachers’ use of SEW programs across multiple social-ecological levels of influence (ranging from community to school and individual levels). In this study, parent or caregiver involvement in class activities and the availability of wellbeing-related policies in primary schools were found to be influential in primary classroom teachers’ use of SEW programs. Teachers who often or always involve parents or caregivers in class activities were at a higher odds of program use relative to teachers who never or rarely involved parents or caregivers in class activities. However, teachers employed in schools with the highest number of wellbeing-related policies available were at a lower odds of program use relative to teachers employed in schools with fewer wellbeing-related policies available. Future research should investigate primary classroom teachers’ autonomy and motivations for using SEW programs and the reasons behind the selection and use of particular types of programs. A larger emphasis should also be placed upon teachers not using SEW programs to identify valid reasons for non-use. This would provide another step towards bridging the gap between the expectations of program developers and the needs of teachers who implement programs in practice. Additionally, the availability of wellbeing-related school policies and the types of activities that parents and caregivers are involved with in the classroom warrant more in-depth investigation. This will help to ascertain how and why these factors influence primary classroom teachers’ use of SEW programs on a day-to-day basis in schools.

Improving ultrasound excitation systems using a flexible power supply with adjustable voltage and frequency to drive piezoelectric transducers

The ability of a piezoelectric transducer in energy conversion is rapidly expanding in several applications. Some of the industrial applications for which a high power ultrasound transducer can be used are surface cleaning, water treatment, plastic welding and food sterilization. Also, a high power ultrasound transducer plays a great role in biomedical applications such as diagnostic and therapeutic applications. An ultrasound transducer is usually applied to convert electrical energy to mechanical energy and vice versa. In some high power ultrasound system, ultrasound transducers are applied as a transmitter, as a receiver or both. As a transmitter, it converts electrical energy to mechanical energy while a receiver converts mechanical energy to electrical energy as a sensor for control system. Once a piezoelectric transducer is excited by electrical signal, piezoelectric material starts to vibrate and generates ultrasound waves. A portion of the ultrasound waves which passes through the medium will be sensed by the receiver and converted to electrical energy. To drive an ultrasound transducer, an excitation signal should be properly designed otherwise undesired signal (low quality) can deteriorate the performance of the transducer (energy conversion) and increase power consumption in the system. For instance, some portion of generated power may be delivered in unwanted frequency which is not acceptable for some applications especially for biomedical applications. To achieve better performance of the transducer, along with the quality of the excitation signal, the characteristics of the high power ultrasound transducer should be taken into consideration as well. In this regard, several simulation and experimental tests are carried out in this research to model high power ultrasound transducers and systems. During these experiments, high power ultrasound transducers are excited by several excitation signals with different amplitudes and frequencies, using a network analyser, a signal generator, a high power amplifier and a multilevel converter. Also, to analyse the behaviour of the ultrasound system, the voltage ratio of the system is measured in different tests. The voltage across transmitter is measured as an input voltage then divided by the output voltage which is measured across receiver. The results of the transducer characteristics and the ultrasound system behaviour are discussed in chapter 4 and 5 of this thesis. Each piezoelectric transducer has several resonance frequencies in which its impedance has lower magnitude as compared to non-resonance frequencies. Among these resonance frequencies, just at one of those frequencies, the magnitude of the impedance is minimum. This resonance frequency is known as the main resonance frequency of the transducer. To attain higher efficiency and deliver more power to the ultrasound system, the transducer is usually excited at the main resonance frequency. Therefore, it is important to find out this frequency and other resonance frequencies. Hereof, a frequency detection method is proposed in this research which is discussed in chapter 2. An extended electrical model of the ultrasound transducer with multiple resonance frequencies consists of several RLC legs in parallel with a capacitor. Each RLC leg represents one of the resonance frequencies of the ultrasound transducer. At resonance frequency the inductor reactance and capacitor reactance cancel out each other and the resistor of this leg represents power conversion of the system at that frequency. This concept is shown in simulation and test results presented in chapter 4. To excite a high power ultrasound transducer, a high power signal is required. Multilevel converters are usually applied to generate a high power signal but the drawback of this signal is low quality in comparison with a sinusoidal signal. In some applications like ultrasound, it is extensively important to generate a high quality signal. Several control and modulation techniques are introduced in different papers to control the output voltage of the multilevel converters. One of those techniques is harmonic elimination technique. In this technique, switching angles are chosen in such way to reduce harmonic contents in the output side. It is undeniable that increasing the number of the switching angles results in more harmonic reduction. But to have more switching angles, more output voltage levels are required which increase the number of components and cost of the converter. To improve the quality of the output voltage signal with no more components, a new harmonic elimination technique is proposed in this research. Based on this new technique, more variables (DC voltage levels and switching angles) are chosen to eliminate more low order harmonics compared to conventional harmonic elimination techniques. In conventional harmonic elimination method, DC voltage levels are same and only switching angles are calculated to eliminate harmonics. Therefore, the number of eliminated harmonic is limited by the number of switching cycles. In the proposed modulation technique, the switching angles and the DC voltage levels are calculated off-line to eliminate more harmonics. Therefore, the DC voltage levels are not equal and should be regulated. To achieve this aim, a DC/DC converter is applied to adjust the DC link voltages with several capacitors. The effect of the new harmonic elimination technique on the output quality of several single phase multilevel converters is explained in chapter 3 and 6 of this thesis. According to the electrical model of high power ultrasound transducer, this device can be modelled as parallel combinations of RLC legs with a main capacitor. The impedance diagram of the transducer in frequency domain shows it has capacitive characteristics in almost all frequencies. Therefore, using a voltage source converter to drive a high power ultrasound transducer can create significant leakage current through the transducer. It happens due to significant voltage stress (dv/dt) across the transducer. To remedy this problem, LC filters are applied in some applications. For some applications such as ultrasound, using a LC filter can deteriorate the performance of the transducer by changing its characteristics and displacing the resonance frequency of the transducer. For such a case a current source converter could be a suitable choice to overcome this problem. In this regard, a current source converter is implemented and applied to excite the high power ultrasound transducer. To control the output current and voltage, a hysteresis control and unipolar modulation are used respectively. The results of this test are explained in chapter 7.

Culturally safe practice in social work

This presentation discusses the use of field experiences in educating social work students in culturally safe practice with Aboriginal and Torres Strait Islander peoples and communities.

The Imperial War Museum's social interpretation project

This report represents the output from research undertaken by University of Salford and MTM London as part of the joint Digital R&D Fund for Arts and Culture, operated by Nesta, Arts Council England and the AHRC. University of Salford and MTM London received funding from the programme to act as researchers on the Social Interpretation (SI) project, which was led by the Imperial War Museum (IWM) and their technical partners, The Centre for Digital Humanities, University College London, Knowledge Integration, and Gooii. The project was carried out between October 2011 and October 2012.

Do adolescents ‘like’ the use of social networking and associated technologies for physical activity promotion?

Physical activity has been identified as a key behaviour in determining an individual’s health and functioning. Adolescent physical inactivity has been shown to track strongly through to adulthood. Interventions in youth to promote and increase physical activity have had mixed results. The significant rise over the past decade in time spent by adolescents performing social networking may provide a unique opportunity for health promoters to interact with adolescents through a familiar medium. The purpose of was study is to investigate the potential utility of social networking and associated technologies for the promotion of physical activity amongst adolescents. Participants were recruited from two nondenominational same-sex private schools, from high socioeconomic backgrounds in Brisbane, Australia. A total of 112 (90.3%) participants had complete data sets and were included in the analysis. Account ownership and rates of access to some social networking sites were high. However, a combination of a lack of interest and additional risks associated with social networking utilities, means that caution should be undertaken prior to the commencement of any intervention seeking to increase engagement in physical activities through these mediums. Student smart phone access and interest in smart phone applications for physical activity promotion purposes were moderate, and may provide opportunities for samples of adolescents from high socioeconomic backgrounds who are more likely to have access to appropriate technologies. As technology advances, the rate of smart phone ownership as opposed to overall phone ownership is likely to steadily increase over time. Access and use of information technology by children likely to continue to become more convenient. This makes smart phone applications as a means for physical activity promotion progressively more practical, and a promising future option.

Empower me : social innovation design for homeless families : collective design creativity

Design Creativity has largely been explored as an individual expression of design cognition rather than as the collective manifestation of interaction in context. Recent approaches to design with an emphasis on co-design suggest that the problem-solution space co-evolves through social interaction. Socially Responsive Design for Social Innovation constitutes the most recent and perhaps the most promising domain of application for design thinking practices that emphasize collaborative innovation. In this paper, we describe the ideation of a service design solution for homeless families (Em.power.me), developed through consultation with a range of stakeholders over a three month period. This service design innovation aimed to visualise how such a service would operate and identify the potential benefits for all stakeholders. We focus here on the phases leading to the ideation of the service design.

Connected learning in the library as a product of hacking, making, social diversity and messiness

Learning is most effective when intrinsically motivated through personal interest, and situated in a supportive socio-cultural context. This paper reports on findings from a study that explored implications for design of interactive learning environments through 18 months of ethnographic observations of people’s interactions at “Hack The Evening” (HTE). HTE is a meetup group initiated at the State Library of Queensland in Brisbane, Australia, and dedicated to provide visitors with opportunities for connected learning in relation to hacking, making and do-it-yourself technology. The results provide insights into factors that contributed to HTE as a social, interactive and participatory environment for learning – knowledge is created and co-created through uncoordinated interactions among participants that come from a diversity of backgrounds, skills and areas of expertise. The insights also reveal challenges and barriers that the HTE group faced in regards to connected learning. Four dimensions of design opportunities are presented to overcome those challenges and barriers towards improving connected learning in library buildings and other free-choice learning environments that seek to embody a more interactive and participatory culture among their users. The insights are relevant for librarians as well as designers, managers and decision makers of other interactive and free-choice learning environments.

Socio-Spatial Approaches To Literacy Studies: Rethinking the Social Constitution and Politics of Space

Literacy studies have begun to examine the spatial dimension of literacy practices in a way that foregrounds space, and that considers space as constitutive to human relations and practices. This chapter provides an introduction to spatial literacy research, providing a guide to key theorists, themes, and studies that have shaped historical and new developments in spatial approaches to literacy practice and pedagogy. It begins by reconceptualising socio-spatial approaches to literacy research and defines terms. Intersections with related social theories are examined, with an emphasis on critical approaches and the politics of space. It clarifies the relationship between socio-spatial and socio-cultural paradigms, revisiting the spatial in seminal socio-cultural research. It covers new ground,including networks, flows, and deterritorialisation of literacy practice. The chapter concludes with challenges and recommendations for future language research and educational practice.

Assessing resilience of water resources systems under the impacts of climate change

This paper presents an approach to assess the resilience of a water supply system under the impacts of climate change. Changes to climate characteristics such as rainfall, evapotranspiration and temperature can result in changes to the global hydrological cycle and thereby adversely impact on the ability of water supply systems to meet service standards in the future. Changes to the frequency and characteristics of floods and droughts as well as the quality of water provided by groundwater and surface water resources are the other consequences of climate change that will affect water supply system functionality. The extent and significance of these changes underline the necessity for assessing the future functionality of water supply systems under the impacts of climate change. Resilience can be a tool for assessing the ability of a water supply system to meet service standards under the future climate conditions. The study approach is based on defining resilience as the ability of a system to absorb pressure without going into failure state as well as its ability to achieve an acceptable level of function quickly after failure. In order to present this definition in the form of a mathematical function, a surrogate measure of resilience has been proposed in this paper. In addition, a step-by-step approach to estimate resilience of water storage reservoirs is presented. This approach will enable a comprehensive understanding of the functioning of a water storage reservoir under future climate scenarios and can also be a robust tool to predict future challenges faced by water supply systems under the consequence of climate change.

Ethics and social networking sites : a disclosive analysis of Facebook

Purpose – This paper aims to provide insights into the moral values embodied by a popular social networking site (SNS), Facebook. Design/methodology/approach – This study is based upon qualitative fieldwork, involving participant observation, conducted over a two-year period. The authors adopt the position that technology as well as humans has a moral character in order to disclose ethical concerns that are not transparent to users of the site. Findings – Much research on the ethics of information systems has focused on the way that people deploy particular technologies, and the consequences arising, with a view to making policy recommendations and ethical interventions. By focusing on technology as a moral actor with reach across and beyond the internet, the authors reveal the complex and diffuse nature of ethical responsibility and the consequent implications for governance of SNS. Research limitations/implications – The authors situate their research in a body of work known as disclosive ethics, and argue for an ongoing process of evaluating SNS to reveal their moral importance. Along with that of other authors in the genre, this work is largely descriptive, but the paper engages with prior research by Brey and Introna to highlight the scope for theory development. Practical implications – Governance measures that require the developers of social networking sites to revise their designs fail to address the diffuse nature of ethical responsibility in this case. Such technologies need to be opened up to scrutiny on a regular basis to increase public awareness of the issues and thereby disclose concerns to a wider audience. The authors suggest that there is value in studying the development and use of these technologies in their infancy, or if established, in the experiences of novice users. Furthermore, flash points in technological trajectories can prove useful sites of investigation. Originality/value – Existing research on social networking sites either fails to address ethical concerns head on or adopts a tool view of the technologies so that the focus is on the ethical behaviour of users. The authors focus upon the agency, and hence the moral character, of technology to show both the possibilities for, and limitations of, ethical interventions in such cases.

Harnessing the power of real and virtual social networks during disasters

The mass media and emergency services organisations routinely gather information and disseminate it to the public. During disaster situations both the media and emergency services require acute situational awareness. New social media technologies offer opportunities to enhance situational awareness by crowd-sourcing information using real and virtual social networks. This paper documents how real and virtual social networks were used by a reporter and by members of the public to gather and disseminate emergency information during the flash flood disaster in Toowoomba and the Lockyer Valley in January 2011 and in the days and weeks after the disaster.

Social Media Sites as Online Information Grounds : An exploratory study of the ways in which Information Technology (IT) professionals experience social media

Social media tools are often the result of innovations in Information Technology and developed by IT professionals and innovators. Nevertheless, IT professionals, many of whom are responsible for designing and building social media technologies, have not been investigated on how they themselves use or experience social media for professional purposes. This study will use Information Grounds Theory (Pettigrew, 1998) as a framework to study IT professionals’ experience in using social media for professional purposes. Information grounds facilitates the opportunistic discovery of information within social settings created temporarily at a place where people gather for a specific purpose (e.g., doctors’ waiting rooms, office tea rooms etc.), but the social atmosphere stimulates spontaneous sharing of information (Pettigrew, 1999). This study proposes that social media has the qualities that make it a rich information grounds; people participate from separate “places” in cyberspace in a synchronous manner in real-time, making it almost as dynamic and unplanned as physical information grounds. There is limited research on how social media platforms are perceived as a “place,” (a place to go to, a place to gather, or a place to be seen in) that is comparable to physical spaces. There is also no empirical study on how IT professionals use or “experience” social media. The data for this study is being collected through a study of IT professionals who currently use Twitter. A digital ethnography approach is being taken wherein the researcher uses online observations and “follows” the participants online and observes their behaviours and interactions on social media. Next, a sub-set of participants will be interviewed on their experiences with and within social media and how social media compares with traditional methods of information grounds, information communication, and collaborative environments. An Evolved Grounded Theory (Glaser, 1992) approach will be used to analyse tweets data and interviews and to map the findings against the Information Ground Theory. Findings from this study will provide foundational understanding of IT professionals’ experiences within social media, and can help both professionals and researchers understand this fast-evolving method of communications.

Unnatural selection : curricular conversations in TIP 1962–2012

Our task is to consider the evolving perspectives around curriculum documented in the Theory Into Practice (TIP) corpus to date. The 50 years in question, 1962–2012, account for approximately half the history of mass institutionalized schooling. Over this time, the upper age of compulsory schooling has crept up, stretching the school curriculum's reach, purpose, and clientele. These years also span remarkable changes in the social fabric, challenging deep senses of the nature and shelf-life of knowledge, whose knowledge counts, what science can and cannot deliver, and the very purpose of education. The school curriculum is a key social site where these challenges have to be addressed in a very practical sense, through a design on the future implemented within the resources and politics of the present. The task's metaphor of ‘evolution’ may invoke a sense of gradual cumulative improvement, but equally connotes mutation, hybridization, extinction, survival of the fittest, and environmental pressures. Viewed in this way, curriculum theory and practice cannot be isolated and studied in laboratory conditions—there is nothing natural, neutral, or self-evident about what knowledge gets selected into the curriculum. Rather, the process of selection unfolds as a series of messy, politically contaminated, lived experiments; thus curriculum studies require field work in dynamic open systems. We subscribe to Raymond Williams' approach to social change, which he argues is not absolute and abrupt, one set of ideas neatly replacing the other. For Williams, newly emergent ideas have to compete against the dominant mindset and residual ideas “still active in the cultural process'” (Williams, 1977, p. 122). This means ongoing debates. For these reasons, we join Schubert (1992) in advocating “continuous reconceptualising of the flow of experience” (p. 238) by both researchers and practitioners.