Sustainable utilization of inland water resources: an integrated program for research and management

In both developed and developing countries, there is increased competition for water resources, resulting in deficiencies in supply and in various forms of pollution. In developing countries, the nutritional potential of aquatic resources is very important. To realize this potential, integrated research and management for sustainable water resource use are needed. This requires a sound understanding of the structure and function of aquatic ecosystems. A programme is presented which stresses the interrelationships of the physical, chemical and biological components of aquatic systems and their catchments. The programme consists of 16 stages in 5 phases, which are as follows: System description; System functioning and modelling; Resource assessment/dynamics; Resource potential; and, Resource utilization for sustainability. This programme enables workers within different disciplines to identify how their expertise contributes to the overall research requirements to support resource development.

Aplicação do modelo hidrológico SWMM na gestão das águas pluviais urbanas: estudo de caso da bacia hidrográfica do Rio Morto, Rio de Janeiro.

O crescimento da população e dos núcleos urbanos durante o século XX, sobretudo nos países em desenvolvimento, contribuiu para o aumento das áreas impermeáveis das bacias hidrográficas, com impactos importantes nos sistemas de drenagem urbana e na ocorrência de enchentes associadas. As enchentes trazem prejuízos materiais, na saúde e sociais. Recentemente, têm sido propostas práticas conservacionistas e medidas compensatórias, que buscam contribuir para o controle das enchentes urbanas, através do retardo do pico e amortecimento dos hidrogramas. Modelos matemáticos hidrológicos-hidráulicos permitem a simulação da adoção destas medidas de controle, demonstrando e otimizando sua localização. Esta dissertação apresenta os resultados da aplicação do modelo hidrológico Storm Water Management Model (SWMM) à bacia hidrográfica de estudo e representativa do rio Morto localizada em área peri-urbana em Jacarepaguá na cidade do Rio de Janeiro, com área de 9,41 km. O processamento do modelo SWMM foi realizado com o apoio da interface Storm and Sanitary Analysis (SSA), integrada ao sistema AutoCAD Civil 3D. Além da verificação da adequabilidade do modelo à representação dos sistemas hidrológico e hidráulico na bacia, foram desenvolvidos estudos para dois cenários como medidas de controle de enchentes: cenário 1, envolvendo implantação de um reservatório de detenção e, cenário 2, considerando a implantação de reservatórios de águas pluviais nos lotes. Os hidrogramas resultantes foram comparados ao hidrograma resultante da simulação nas condições atuais. Além disso, foram avaliados os custos associados a cada um dos cenários usando o sistema de orçamento da Empresa Rio Águas da PCRJ. Nas simulações foram adotadas a base cartográfica, e os dados climatológicos e hidrológicos previamente observados no contexto do projeto HIDROCIDADES, Rede de Pesquisa BRUM/FINEP, na qual este estudo se insere. Foram representados os processos de geração e propagação do escoamento superficial e de base. Durante o processo de calibração, realizou-se a análise de sensibilidade dos parâmetros, resultando como parâmetros mais sensíveis os relativos às áreas impermeáveis, especialmente o percentual de área impermeável da bacia (Ai). A calibração foi realizada através do ajuste manual de sete parâmetros do escoamento superficial e cinco do escoamento de base para três eventos. Foram obtidos coeficientes de determinação entre 0,52 e 0,64, e a diferença entre os volumes escoados e observados entre 0,60% e 4,96%. Para a validação do modelo foi adotado um evento pluviométrico excepcional observado na cidade em abril de 2010, que à época causou enchentes e grandes transtornos na cidade. Neste caso, o coeficiente de determinação foi igual a 0,78 e a diferença entre volumes foi de 15%. As principais distorções entre hidrogramas observados e simulados foram verificados para as vazões máximas. Em ambos os cenários as enchentes foram controladas. A partir destes estudos, pôde-se concluir que o melhor custo-benefício foi o cenário 2. Para este cenário, foi observado maiores amortecimento e retardo da vazão de pico do hidrograma, igual a 21,51% da vazão simulada para as condições atuais da bacia. Os custos de implantação orçados para os reservatórios de lote ficaram 52% a menos do que o do reservatório de detenção.

Multi-objective design and optimisation of bypass outlet-guide vanes

This paper describes the development of an automated design optimization system that makes use of a high fidelity Reynolds-Averaged CFD analysis procedure to minimize the fan forcing and fan BOGV (bypass outlet guide vane) losses simultaneously taking into the account the down-stream pylon and RDF (radial drive fairing) distortions. The design space consists of the OGV's stagger angle, trailing-edge recambering, axial and circumferential positions leading to a variable pitch optimum design. An advanced optimization system called SOFT (Smart Optimisation for Turbomachinery) was used to integrate a number of pre-processor, simulation and in-house grid generation codes and postprocessor programs. A number of multi-objective, multi-point optimiztion were carried out by SOFT on a cluster of workstations and are reported herein.

Measurement-Integrated simulations and Kalman filter applied to a co-flowing jet

This paper deals with the experimental evaluation of a flow analysis system based on the integration between an under-resolved Navier-Stokes simulation and experimental measurements with the mechanism of feedback (referred to as Measurement-Integrated simulation), applied to the case of a planar turbulent co-flowing jet. The experiments are performed with inner-to-outer-jet velocity ratio around 2 and the Reynolds number based on the inner-jet heights about 10000. The measurement system is a high-speed PIV, which provides time-resolved data of the flow-field, on a field of view which extends to 20 jet heights downstream the jet outlet. The experimental data can thus be used both for providing the feedback data for the simulations and for validation of the MI-simulations over a wide region. The effect of reduced data-rate and spatial extent of the feedback (i.e. measurements are not available at each simulation time-step or discretization point) was investigated. At first simulations were run with full information in order to obtain an upper limit of the MI-simulations performance. The results show the potential of this methodology of reproducing first and second order statistics of the turbulent flow with good accuracy. Then, to deal with the reduced data different feedback strategies were tested. It was found that for small data-rate reduction the results are basically equivalent to the case of full-information feedback but as the feedback data-rate is reduced further the error increases and tend to be localized in regions of high turbulent activity. Moreover, it is found that the spatial distribution of the error looks qualitatively different for different feedback strategies. Feedback gain distributions calculated by optimal control theory are presented and proposed as a mean to make it possible to perform MI-simulations based on localized measurements only. So far, we have not been able to low error between measurements and simulations by using these gain distributions.

Cold-gas chemical vapor deposition to identify the key precursor for rapidly growing vertically-aligned single-wall and few-wall carbon nanotubes from pyrolyzed ethanol

Vertically-aligned carbon nanotubes (VA-CNTs) were rapidly grown from ethanol and their chemistry has been studied using a "cold-gas" chemical vapor deposition (CVD) method. Ethanol vapor was preheated in a furnace, cooled down and then flowed over cobalt catalysts upon ribbon-shaped substrates at 800 °C, while keeping the gas unheated. CNTs were obtained from ethanol on a sub-micrometer scale without preheating, but on a millimeter scale with preheating at 1000 °C. Acetylene was predicted to be the direct precursor by gas chromatography and gas-phase kinetic simulation, and actually led to millimeter-tall VA-CNTs without preheating when fed with hydrogen and water. There was, however a difference in CNT structure, i.e. mainly few-wall tubes from pyrolyzed ethanol and mainly single-wall tubes for unheated acetylene, and the by-products from ethanol pyrolysis possibly caused this difference. The "cold-gas" CVD, in which the gas-phase and catalytic reactions are separately controlled, allowed us to further understand CNT growth. © 2012 Elsevier Ltd. All rights reserved.

DDES of a supersonic coaxial helium jet

The mixing of a light gas in a scramjet combustion chamber is replicated through the simulation of a supersonic coaxial helium jet. Sensitivities of the RANS method to model constants is presented and the DDES method is employed to try and alleviate this modelling weakness. A significant delay in the shear layer transition is found to occur in the DDES simulation and it is suggested this may be due to the absence of inlet turbulence. The influence of the introduction of inflow turbulence is investigated and computational results are compared to experimental data. The influence of model constants on the DDES results are presented. © 2012 by Peter Cocks.

Building performance simulation for the management of thermal performance risks in buildings subject to climate change

This paper reports on research that uses building performance simulation and uncertainty analysis to assess the risks that projected climate change poses to the thermal performance of buildings, and to their critical functions. The work takes meteorological climate change predictions as a starting point, but also takes into account developments and uncertainties in technology, occupancy, intervention and renovation, and others. Four cases are studied in depth to explore the prospects of the quantification of said climate change risks. The research concludes that quantification of the risks posed by climate change is possible, but only with many restrictive assumptions on the input side.

ChESS - Quick and Robust Detection of Chess-board Features

Localization of chess-board vertices is a common task in computer vision, underpinning many applications, but relatively little work focusses on designing a specific feature detector that is fast, accurate and robust. In this paper the `Chess-board Extraction by Subtraction and Summation' (ChESS) feature detector, designed to exclusively respond to chess-board vertices, is presented. The method proposed is robust against noise, poor lighting and poor contrast, requires no prior knowledge of the extent of the chess-board pattern, is computationally very efficient, and provides a strength measure of detected features. Such a detector has significant application both in the key field of camera calibration, as well as in Structured Light 3D reconstruction. Evidence is presented showing its robustness, accuracy, and efficiency in comparison to other commonly used detectors both under simulation and in experimental 3D reconstruction of flat plate and cylindrical objects

The use of liquid crystals as electrorheological fluids in microsystems: Model and measurements

Fluids with controllable flow properties have gained considerable interest in the past few years. Some of these fluids such as magnetorheologic fluids are now widely applied to active dampers and valves. Although these fluids show promising properties for microsystems, their applicability is limited to the microscale since particles suspended in these fluids tend to obstruct microchannels. This paper investigates the applicability of electrorheologic liquid crystals (LCs) in microsystems. Since LCs do not contain suspended particles, they show intrinsic advantages over classic rheologic fluids in micro-applications. This paper presents a novel physical model that describes the static and the dynamic behaviour of electrorheologic LCs. The developed model is validated by comparing simulations and measurements performed on a rectangular microchannel. This assessment shows that the model presented in this paper is able to simulate both static and dynamic properties accurately. Therefore, this model is useful for the understanding, simulation and optimization of devices using LCs as electrorheological fluid. In addition, measurements performed in this paper reveal remarkable properties of LCs, such as high bandwidths and high changes in flow resistance. © 2006 IOP Publishing Ltd.

Interaction between heavy vehicles and roads

This paper discusses road damage caused by heavy commercial vehicles. Chapter 1 presents some important terminology and a brief historical review of road construction and vehicle-road interaction, from ancient times to the present day. The main types of vehicle-generated road damage, and the methods that are used by pavement engineers to analyze them are discussed in Chapter 2. Attention is also given to the main features of the response of road surfaces to vehicle loads and mathematical models that have been developed to predict road response. Chapter 3 reviews the effects on road damage of vehicle features which can be studied without consideration of vehicle dynamics. These include gross vehicle weight, axle and tire configurations, tire contact conditions and static load sharing in axle group suspensions. The dynamic tire forces generated by heavy vehicles are examined in Chapter 4. The discussion includes their simulation and measurement, their principal characteristics, the effects of tires and suspension design on dynamic forces, and the potential benefits of using advanced suspensions for minimizing dynamic tire forces. Chapter 5 discusses methods for estimating the effects of dynamic tire forces on road damage. The two main approaches are either to examine the statistics of the forces themselves; or to calculate the response of a pavement model to the forces, and to calculate the resulting wear using a material damage model. The issues involved in assessing vehicles for 'road friendliness' are discussed in Chapter 6. Possible assessment methods include measuring strains in an instrumented pavement traversed by the vehicle, measuring dynamic tire forces, or measuring vehicle parameters such as the 'natural frequency' and 'damping ratio'. Each of these measurements involves different assumptions and analysis methods for converting the results into some measure of road damage. Chapter 7 includes a summary of the main conclusions of the paper and recommendations for tire and suspension design, road design and construction, and for vehicle regulations.

ChESS - Quick and robust detection of chess-board features

Localization of chess-board vertices is a common task in computer vision, underpinning many applications, but relatively little work focusses on designing a specific feature detector that is fast, accurate and robust. In this paper the 'Chess-board Extraction by Subtraction and Summation' (ChESS) feature detector, designed to exclusively respond to chess-board vertices, is presented. The method proposed is robust against noise, poor lighting and poor contrast, requires no prior knowledge of the extent of the chess-board pattern, is computationally very efficient, and provides a strength measure of detected features. Such a detector has significant application both in the key field of camera calibration, as well as in structured light 3D reconstruction. Evidence is presented showing its superior robustness, accuracy, and efficiency in comparison to other commonly used detectors, including Harris & Stephens and SUSAN, both under simulation and in experimental 3D reconstruction of flat plate and cylindrical objects. © 2013 Elsevier Inc. All rights reserved.