Le psychotique et la psychose à l'épreuve de la réalité

Résumé Qu'est-ce que la psychose, comment apparaît-elle comme «perte du contact avec la réalité», le rapport au réel permet-il de constituer une classe de maladies mentales en soi, d'inférer une structure ou une superstructure commune aux diverses formes cliniques, voilà nos questions de départ, à l'heure où la notion même de psychose est peut-être en train de disparaître de la nosologie psychiatrique contemporaine. Notre travail s'attache, dans sa première partie, à montrer comment est apparu, dans la littérature médicale et psychiatrique du XIXème siècle, le terme de «psychose », pour désigner d'abord l'ensemble des affections mentales telles qu'elles se manifestaient en particulier chez les malades asilaires, dans le cadre plus général des «névroses », c'est-à-dire des affections primaires du système nerveux. Ainsi, la psychose se situe dès l'origine à l'interface du biologique et du psychologique ; s'esquisse aussi de la sorte un champ spécifique au psychiatre, les névroses : « non-psychotiques » relevant plutôt du somaticien. Un premier auteur (H.Schuele) distingue cérébro-psychoses » et « psycho-névroses » dans une acception plus familière au lecteur contemporain : les premières sont des maladies plus sévères, irréversibles, dont l'étiologie est plutôt organique, et les secondes sont moins graves, des maladies « de l'esprit ». Mais c'est avec Freud, qui réunit l'hystérie (la névrose par excellence, d'autant plus qu'elle se manifeste presque exclusivement par des symptômes neurologiques, c'est-à-dire «névrotiques »), les phobies et ce que Kraepelin appelait la Zwangsirresein (la folie de contrainte) sous le terme de psychonévroses de transfert, que vient se constituer durablement le partenaire dialectique qui permettra à la psychose de s'ériger en classe, regroupant la schizophrénie, la maladie maniaco-dépressive, la paranoïa et les psychoses organiques. Freud a situé la problématique spécifique de la psychose comme une perturbation du rapport à la réalité. Cet aspect des psychoses est le plus largement retenu dans le langage «courant » de la psychiatrie clinique, de nos jours encore. Dans sa deuxième partie, ce travail cherche à préciser comment s'élaborent chez Freud les théories de la psychose, plus particulièrement pour ce qui est du rapport à la réalité. On verra alors que ces théories rendent compte pour l'essentiel de la clinique de ce que Freud appelle les paraphrénies, qui rassemblent la schizophrénie et la paranoïa, mais que la maladie maniaco-dépressive semble pour lui d'un registre relativement différent. Il propose même de la ranger dans une catégorie propre, les «névroses narcissiques », reprenant pour l'occasion un terme qu'il utilisait auparavant pour les «psychoses » - comme quoi les questions terminologiques ne sont ni anodines, ni simples. Notre travail s'intéresse enfin à la façon dont la littérature analytique a abordé ces questions, à la suite de Freud. Les auteurs, choisis pour leur renom et leur importance historique ainsi que pour leur intérêt pour les questions soulevées ici, ont chacun des conceptions très diverses des psychoses et de la façon dont l'homme établit un rapport avec la réalité qui l'entoure. D'une façon générale, et comme Freud, ils traitent de la schizophrénie bien plus que de la maladie maniaco-dépressive, et les mécanismes psychopathologiques proposés semblent toujours assez distincts. En définitive, nous n'avons pas trouvé, dans l'histoire de la notion de psychose et chez quelques-uns des auteurs majeurs de la psychanalyse, de justification théorique à la constitution d'une classe en soi de maladies mentales, articulée autour d'un trouble spécifique du rapport à la réalité, qui corresponde à la classe des psychoses. Il n'en reste pas moins que la clinique, qui rapproche souvent la crise schizophrénique et la crise maniaque, appelle assez naturellement l'adjectif «psychotique », comme descriptif de certains symptômes manifestant, le plus souvent, la présence d'une «psychose» sous-jacente.

BIMS: Biomedical Information Management System

This final year project presents the design principles and prototype implementation of BIMS (Biomedical Information Management System), a flexible software system which provides an infrastructure to manage all information required by biomedical research projects.The BIMS project was initiated with the motivation to solve several limitations in medical data acquisition of some research projects, in which Universitat Pompeu Fabra takes part. These limitations,based on the lack of control mechanisms to constraint information submitted by clinicians, impact on the data quality, decreasing it.BIMS can easily be adapted to manage information of a wide variety of clinical studies, not being limited to a given clinical specialty. The software can manage both, textual information, like clinical data (measurements, demographics, diagnostics, etc ...), as well as several kinds of medical images (magnetic resonance imaging, computed tomography, etc ...). Moreover, BIMS provides a web - based graphical user interface and is designed to be deployed in a distributed andmultiuser environment. It is built on top of open source software products and frameworks.Specifically, BIMS has been used to represent all clinical data being currently used within the CardioLab platform (an ongoing project managed by Universitat Pompeu Fabra), demonstratingthat it is a solid software system, which could fulfill requirements of a real production environment.

Traducción comentada de “Genetically Modified Organisms (GMOs): Transgenic Crops and Recombinant DNA Technology”

The purpose of this paper is to provide a translation into Spanish of a review articleabout genetically modified organisms (GMOs) entitled “Genetically ModifiedOrganisms (GMOs): Transgenic Crops and Recombinant DNA Technology” publishedby the well-known scientific journal Nature. In a world where English has become thelingua franca when it comes to transferring scientific knowledge and information, itmust be taken into account that not everyone—from scientist to the general public—hasa good enough command of English so that they can feel comfortable enough reading inthis language. Translators are consequently needed resulting from a great demand oftranslation activity into, for example, Spanish. This is the reason why the proposedSpanish translation is followed by a detailed analysis emphasizing the difficulties andproblems that characterize scientific—and also general—translation (i.e. terminology,syntax, semantics, pragmatics, and ideology), for which different approaches as how tosolve them are provided. On the basis of the analysis, it can be concluded thatexperience will be of much help to scientific translators, given that specificterminological knowledge and style requirements must always be born in mind whentranslating in this field. Moreover, this paper is intended to serve as a guide forTranslation students specializing in the field of science and the expectation is to helpthem make the right decisions when it comes to translating. However, it is clear that itcan only be thought of as an introduction that should be completed with further researchand documentation tasks in order to offer a complete reference tool: the ultimatehandbook of scientific translation.

Characterization of olive oil by carbon isotope analysis of individual fatty acids: Implications for authentication

The fatty acids of olive oils of distinct quality grade from the most important European Union (EU) producer countries were chemically and isotopically characterized. The analytical approach utilized combined capillary column gas chromatography-mass spectrometry (GC/MS) and the novel technique of compound-specific isotope analysis (CSIA) through gas chromatography coupled to a stable isotope ratio mass spectrometer (IRMS) via a combustion (C) interface (GC/C/IRMS). This approach provides further insights into the control of the purity and geographical origin of oils sold as cold-pressed extra virgin olive oil with certified origin appellation. The results indicate that substantial enrichment in heavy carbon isotope (C-13) of the bulk oil and of individual fatty acids are related to (1) a thermally induced degradation due to deodorization or steam washing of the olive oils and (2) the potential blend with refined olive oil or other vegetable oils. The interpretation of the data is based on principal component analysis of the fatty acids concentrations and isotopic data (delta(13)C(oil), delta(13)C(16:0), delta(13)C(18:1)) and on the delta(13)C(16:0) vs delta(13)C(18:1) covariations. The differences in the delta(13)C values of palmitic and oleic acids are discussed in terms of biosynthesis of these acids in the plant tissue and admixture of distinct oils.

Méthodes sismiques actives adaptées à l'étude de milieux hétérogènes : application aux glissements de terrain

Résumé Les glissements de terrain représentent un des principaux risques naturels dans les régions montagneuses. En Suisse, chaque année les glissements de terrains causent des dégâts qui affectent les infrastructures et ont des coûts financiers importants. Une bonne compréhension des mécanismes des glissements peut permettre d'atténuer leur impact. Celle-ci passe notamment par la connaissance de la structure interne du glissement, la détermination de son volume et de son ou ses plans de glissement. Dans un glissement de terrain, la désorganisation et la présence de fractures dans le matériel déplacé engendre un changement des paramètres physiques et en particulier une diminution des vitesses de propagation des ondes sismiques ainsi que de la densité du matériel. Les méthodes sismiques sont de ce fait bien adaptées à l'étude des glissements de terrain. Parmi les méthodes sismiques, l'analyse de la dispersion des ondes de surface est une méthode simple à mettre en oeuvre. Elle présente l'avantage d'estimer les variations des vitesses de cisaillement avec la profondeur sans avoir spécifiquement recours à l'utilisation d'une source d'onde S et de géophones horizontaux. Sa mise en oeuvre en trois étapes implique la mesure de la dispersion des ondes de surface sur des réseaux étendus, la détermination des courbes de dispersion pour finir par l'inversion de ces courbes. Les modèles de vitesse obtenus à partir de cette procédure ne sont valides que lorsque les milieux explorés ne présentent pas de variations latérales. En pratique cette hypothèse est rarement vérifiée, notamment pour un glissement de terrain dans lequel les couches remaniées sont susceptibles de présenter de fortes hétérogénéités latérales. Pour évaluer la possibilité de déterminer des courbes de dispersion à partir de réseaux de faible extension des mesures testes ont été effectuées sur un site (Arnex, VD) équipé d'un forage. Un profil sismique de 190 m de long a été implanté dans une vallée creusée dans du calcaire et remplie par des dépôts glacio-lacustres d'une trentaine de mètres d'épaisseur. Les données acquises le long de ce profil ont confirmé que la présence de variations latérales sous le réseau de géophones affecte l'allure des courbes de dispersion jusqu'à parfois empêcher leur détermination. Pour utiliser l'analyse de la dispersion des ondes de surface sur des sites présentant des variations latérales, notre approche consiste à déterminer les courbes de dispersions pour une série de réseaux de faible extension, à inverser chacune des courbes et à interpoler les différents modèles de vitesse obtenus. Le choix de la position ainsi que de l'extension des différents réseaux de géophones est important. Il tient compte de la localisation des hétérogénéités détectées à partir de l'analyse de sismique réfraction, mais également d'anomalies d'amplitudes observées sur des cartes qui représentent dans le domaine position de tir - position du récepteur, l'amplitude mesurée pour différentes fréquences. La procédure proposée par Lin et Lin (2007) s'est avérée être une méthode efficace permettant de déterminer des courbes de dispersion à partir de réseaux de faible extension. Elle consiste à construire à partir d'un réseau de géophones et de plusieurs positions de tir un enregistrement temps-déports qui tient compte d'une large gamme de distances source-récepteur. Au moment d'assembler les différentes données une correction de phase est appliquée pour tenir compte des hétérogénéités situées entre les différents points de tir. Pour évaluer cette correction nous suggérons de calculer pour deux tir successif la densité spectrale croisée des traces de même offset: Sur le site d'Arnex, 22 courbes de dispersions ont été déterminées pour de réseaux de géophones de 10 m d'extension. Nous avons également profité du forage pour acquérir un profil de sismique verticale en ondes S. Le modèle de vitesse S déduit de l'interprétation du profil de sismique verticale est utilisé comme information à priori lors l'inversion des différentes courbes de dispersion. Finalement, le modèle en deux dimension qui a été établi grâce à l'analyse de la dispersion des ondes de surface met en évidence une structure tabulaire à trois couches dont les limites coïncident bien avec les limites lithologiques observées dans le forage. Dans celui-ci des argiles limoneuses associées à une vitesse de propagation des ondes S de l'ordre de 175 m/s surmontent vers 9 m de profondeur des dépôts de moraine argilo-sableuse caractérisés par des vitesses de propagation des ondes S de l'ordre de 300 m/s jusqu'à 14 m de profondeur et supérieur ou égal à 400 m/s entre 14 et 20 m de profondeur. Le glissement de la Grande Combe (Ballaigues, VD) se produit à l'intérieur du remplissage quaternaire d'une combe creusée dans des calcaires Portlandien. Comme dans le cas du site d'Arnex les dépôts quaternaires correspondent à des dépôts glacio-lacustres. Dans la partie supérieure la surface de glissement a été localisée à une vingtaine de mètres de profondeur au niveau de l'interface qui sépare des dépôts de moraine jurassienne et des dépôts glacio-lacustres. Au pied du glissement 14 courbes de dispersions ont été déterminées sur des réseaux de 10 m d'extension le long d'un profil de 144 m. Les courbes obtenues sont discontinues et définies pour un domaine de fréquence de 7 à 35 Hz. Grâce à l'utilisation de distances source-récepteur entre 8 et 72 m, 2 à 4 modes de propagation ont été identifiés pour chacune des courbes. Lors de l'inversion des courbes de dispersion la prise en compte des différents modes de propagation a permis d'étendre la profondeur d'investigation jusqu'à une vingtaine de mètres de profondeur. Le modèle en deux dimensions permet de distinguer 4 couches (Vs1 < 175 m/s, 175 m/s < Vs2 < 225 m/s, 225 m/s < Vs3 < 400 m/s et Vs4 >.400 m/s) qui présentent des variations d'épaisseur. Des profils de sismiques réflexion en ondes S acquis avec une source construite dans le cadre de ce travail, complètent et corroborent le modèle établi à partir de l'analyse de la dispersion des ondes de surface. Un réflecteur localisé entre 5 et 10 m de profondeur et associé à une vitesse de sommation de 180 m/s souligne notamment la géométrie de l'interface qui sépare la deuxième de la troisième couche du modèle établi à partir de l'analyse de la dispersion des ondes de surface. Abstract Landslides are one of the main natural hazards in mountainous regions. In Switzerland, landslides cause damages every year that impact infrastructures and have important financial costs. In depth understanding of sliding mechanisms may help limiting their impact. In particular, this can be achieved through a better knowledge of the internal structure of the landslide, the determination of its volume and its sliding surface or surfaces In a landslide, the disorganization and the presence of fractures in the displaced material generate a change of the physical parameters and in particular a decrease of the seismic velocities and of the material density. Therefoe, seismic methods are well adapted to the study of landslides. Among seismic methods, surface-wave dispersion analysis is a easy to implement. Through it, shearwave velocity variations with depth can be estimated without having to resort to an S-wave source and to horizontal geophones. Its 3-step implementation implies measurement of surface-wave dispersion with long arrays, determination of the dispersion curves and finally inversion of these curves. Velocity models obtained through this approach are only valid when the investigated medium does not include lateral variations. In practice, this assumption is seldom correct, in particular for landslides in which reshaped layers likely include strong lateral heterogeneities. To assess the possibility of determining dispersion curves from short array lengths we carried out tests measurements on a site (Arnex, VD) that includes a borehole. A 190 m long seismic profile was acquired in a valley carved into limestone and filled with 30 m of glacio-lacustrine sediments. The data acquired along this profile confirmed that the presence of lateral variations under the geophone array influences the dispersion-curve shape so much that it sometimes preventes the dispersion curves determination. Our approach to use the analysis of surface-wave dispersion on sites that include lateral variations consists in obtaining dispersion curves for a series of short length arrays; inverting each so obtained curve and interpolating the different obtained velocity model. The choice of the location as well as the geophone array length is important. It takes into account the location of the heterogeneities that are revealed by the seismic refraction interpretation of the data but also, the location of signal amplitude anomalies observed on maps that represent, for a given frequency, the measured amplitude in the shot position - receiver position domain. The procedure proposed by Lin and Lin (2007) turned out to be an efficient one to determine dispersion curves using short extension arrays. It consists in building a time-offset from an array of geophones with a wide offset range by gathering seismograms acquired with different source-to-receiver offsets. When assembling the different data, a phase correction is applied in order to reduce static phase error induced by lateral variation. To evaluate this correction, we suggest to calculate, for two successive shots, the cross power spectral density of common offset traces. On the Arnex site, 22 curves were determined with 10m in length geophone-arrays. We also took advantage of the borehole to acquire a S-wave vertical seismic profile. The S-wave velocity depth model derived from the vertical seismic profile interpretation is used as prior information in the inversion of the dispersion-curves. Finally a 2D velocity model was established from the analysis of the different dispersion curves. It reveals a 3-layer structure in good agreement with the observed lithologies in the borehole. In it a clay layer with a shear-wave of 175 m/s shear-wave velocity overlies a clayey-sandy till layer at 9 m depth that is characterized down to 14 m by a 300 m/s S-wave velocity; these deposits have a S-wave velocity of 400 m/s between depths of 14 to 20 m. The La Grand Combe landslide (Ballaigues, VD) occurs inside the Quaternary filling of a valley carved into Portlandien limestone. As at the Arnex site, the Quaternary deposits correspond to glaciolacustrine sediments. In the upper part of the landslide, the sliding surface is located at a depth of about 20 m that coincides with the discontinuity between Jurassian till and glacio-lacustrine deposits. At the toe of the landslide, we defined 14 dispersion curves along a 144 m long profile using 10 m long geophone arrays. The obtained curves are discontinuous and defined within a frequency range of 7 to 35 Hz. The use of a wide range of offsets (from 8 to 72 m) enabled us to determine 2 to 4 mode of propagation for each dispersion curve. Taking these higher modes into consideration for dispersion curve inversion allowed us to reach an investigation depth of about 20 m. A four layer 2D model was derived (Vs1< 175 m/s, 175 m/s <Vs2< 225 m/s, 225 m/s < Vs3 < 400 m/s, Vs4> 400 m/s) with variable layer thicknesses. S-wave seismic reflection profiles acquired with a source built as part of this work complete and the velocity model revealed by surface-wave analysis. In particular, reflector at a depth of 5 to 10 m associated with a 180 m/s stacking velocity image the geometry of the discontinuity between the second and third layer of the model derived from the surface-wave dispersion analysis.

Infections tardives après stabilisation dynamique de la colonne lombaire par le système Dynesys

Introduction La stabilisation dynamique de la colonne lombaire a été développée comme alternative à la spondylodèse pour les lombalgies chroniques dans l'optique de réduire le risque de dégénération du segment adjacent. Le système de neutralisation dynamique « Dynesys » produit par Zimmer (Suisse) est un des produits les plus populaires. Des études portant sur un suivi à moyen terme ont montré des taux de révision dans près de 30% des patients. Nous avons observé quelques cas d'infections tardives chez nos patients et avons décidé de les passer systématiquement en revue. La bactérie Propionibacterium acnés a été récemment identifiée comme cause d'infections à bas bruit de matériel prothétique. Matériels et méthodes Nous présentons une série consécutive de 50 implantations du système Dynesys. Les patients ont été suivis pendant une durée moyenne de 51 mois (0 - 91). Durant cette période, nous avons identifié 12 complications de type infectieuse et 11 complications de type mécanique nécessitant une ré-opération ou une ablation de matériel dans un collectif de 17 patients. Résultats Les infections de matériel se sont produites après une durée médiane de 52 mois (2-77). Les germes trouvés étaient Propionibacterium acnés dans 7 patients sur 11 (seul η = 4 ou en combinaison η = 3). La présentation clinique associe des douleurs nouvelles ou en augmentation et, à la radiologie conventionnelle, un descellement des vis. Cependant, 73.5% des patients présentent, à des degrés divers, des signes radiologiques de descellements sans avoir de symptômes d'infection. Conclusion Le haut taux d'infections tardives avec des germes peu virulents ainsi que la fréquence des signes de descellements de vis constatés nous amènent à suspecter un défaut d'intégration au niveau de l'interface entre l'os et les vis. Les chirurgiens devraient être attentifs à ces signes et exclure activement une infection chez les patients présentant des douleurs nouvelles (ou en augmentation) en combinaison de signes de descellement radiologiques. Une attitude agressive de révision chirurgicale est recommandée dans ces cas.

Ordonnance de sortie d'hôpital: un défi pour la continuité des soins et la collaboration interprofessionnelle [Hospital's discharge prescription: a challenge for continuity of care and the interprofessional collaboration].

The transition between hospital and community is an interface at high risk for medication. "The Association of Family Doctors" committee in the canton of Vaud (MFVaud), together with community pharmacists' and Homecare representatives, have begun to consider the following improvements: fast and co-ordinated care providers' information; arrangements for family doctors appointments as soon as possible; awareness and education for interprofessional collaboration; more secured preparation of pill boxes; development of interprofessional means such as medication use reviews and reconciliations. In the opinion of all the experts, there is an urgent public health need to act in an interprofessional manner, even if the solutions required (especially change in professional culture and technologies) are not immediate.

A tumor-specific cellular environment at the brain invasion border of adamantinomatous craniopharyngiomas.

Craniopharyngiomas (CP) are benign epithelial tumors of the sellar region and can be clinicopathologically distinguished into adamantinomatous (adaCP) and papillary (papCP) variants. Both subtypes are classified according to the World Health Organization grade I, but their irregular digitate brain infiltration makes any complete surgical resection difficult to obtain. Herein, we characterized the cellular interface between the tumor and the surrounding brain tissue in 48 CP (41 adaCP and seven papCP) compared to non-neuroepithelial tumors, i.e., 12 cavernous hemangiomas, 10 meningiomas, and 14 metastases using antibodies directed against glial fibrillary acid protein (GFAP), vimentin, nestin, microtubule-associated protein 2 (MAP2) splice variants, and tenascin-C. We identified a specific cell population characterized by the coexpression of nestin, MAP2, and GFAP within the invasion niche of the adamantinomatous subtype. This was especially prominent along the finger-like protrusions. A similar population of presumably astroglial precursors was not visible in other lesions under study, which characterize them as distinct histopathological feature of adaCP. Furthermore, the outer tumor cell layer of adaCP showed a distinct expression of MAP2, a novel finding helpful in the differential diagnosis of epithelial tumors in the sellar region. Our data support the hypothesis that adaCP, unlike other non-neuroepithelial tumors of the central nervous system, create a tumor-specific cellular environment at the tumor-brain junction. Whether this facilitates the characteristic infiltrative growth pattern or is the consequence of an activated Wnt signaling pathway, detectable in 90% of these tumors, will need further consideration.

Consumer Satisfaction with Websites of Banks - The Moderating Effect of Consumer Technology Attractiveness

The websites are becoming the firms’ first contact interface with their clients. Hence, understanding customers’ online attitudes and behaviors have been capturing increased research attention. The extant research has pointed customers’ satisfaction with the websites as the main reason for customers’ online behaviors. This research has used mostly variables related to the characteristics of the websites as the predictors of customers’ website satisfaction. However, recent research shows that groups of individuals displaying distinctive characteristics react differently to the same context. Therefore, behavior may be considerably different among groups of customers. In this study, we develop a conceptual model of the influence of individual characteristics on the traditional website quality – website satisfaction relationship. We propose a model based on the construct of consumer technology attractiveness (CTA) to represent the genuine positive propensity of individuals toward technology. We further test the moderating effect of this construct on the commonly used predictors of customer’s website satisfaction using Hierarchical Multiple Regression. The empirical study was based on websites of banks operating in Portuguese market. The commercial banking industry is one of the Portuguese industries that better uses the Internet to establish relationships with clients. Data were collected through an online website satisfaction survey, participated by the lecturers and postgraduate students from four Portuguese Universities and Polytechnic Institutes. Our final sample comprised 276 valid questionnaires. Our study permits to conclude that the most commonly used antecedents of website overall satisfaction are still relevant for analyzing consumer’s satisfaction with the banks websites. We also conclude that CTA has a significant moderating effect on almost all customers’ website satisfaction variables used in the study. This study contributes to highlight the theoretical importance and significant influence of consumers’ personal characteristics on their online behavior. Moreover, for the practitioners, a better understanding of these individual characteristics will assist them in developing customized websites that will meet customers’ expectations. O estudo dos comportamentos dos consumidores em ambientes online tem vindo a ter um crescente interesse, uma vez que os websites estão a transformar-se num importante ponto de contacto entre as empresas e os seus clientes. A satisfação dos clientes com os websites tem sido apontada pela Literatura como o principal condicionante dos comportamentos online dos consumidores. No entanto, a investigação científica tem conseguido provar que grupos de indivíduos com características distintas reagem de forma diferente quando submetidos a contextos idênticos, o que poderá levar a diferenças significativas no comportamento online de consumidores pertencentes a diferentes grupos. Neste estudo desenvolvemos um modelo conceptual que reflecte a influência de características individuais na relação entre a qualidade e a satisfação com os websites. Propomos um modelo assente na atractividade tecnológica do consumidor (CTA), que representa a propensão genuína que os indivíduos possuem em relação à tecnologia. Testamos o efeito moderador deste conceito sobre as variáveis mais utilizadas nos estudos sobre a satisfação dos consumidores com os websites, utilizando a Regressão Múltipla Hierárquica. O estudo empírico baseou-se nos websites dos bancos que operam no mercado português, uma vez que este sector é um dos que melhor utiliza a Internet na sua relação com os clientes. Os dados foram recolhidos através de um questionário sobre satisfação com os websites, colocado online e dirigido a docentes e estudantes de programas de pós-graduações, mestrados e doutoramentos de quatro universidades e instituto politécnico portugueses, tendo resultado numa amostra final de 276 questionários validados estatisticamente. Este estudo permitiu concluir que as variáveis que são mais utilizadas como antecedentes da satisfação dos consumidores com os websites, continuam a ser igualmente válidas para a análise dos websites dos bancos. Também concluímos que a CTA tem efeitos moderadores significativos na grande maioria das variáveis utilizadas neste estudo. Assim, conseguimos realçar a importância teórica das características pessoais dos consumidores no seu comportamento online. Para os gestores, uma melhor compreensão destas características individuais permitir-lhes-á desenvolver websites customizados que irão satisfazer as expectativas dos seus clientes.

Stoneley wave modeling in heterogeneous porous media with viscous pore fluids

We implemented Biot-type porous wave equations in a pseudo-spectral numerical modeling algorithm for the simulation of Stoneley waves in porous media. Fourier and Chebyshev methods are used to compute the spatial derivatives along the horizontal and vertical directions, respectively. To prevent from overly short time steps due to the small grid spacing at the top and bottom of the model as a consequence of the Chebyshev operator, the mesh is stretched in the vertical direction. As a large benefit, the Chebyshev operator allows for an explicit treatment of interfaces. Boundary conditions can be implemented with a characteristics approach. The characteristic variables are evaluated at zero viscosity. We use this approach to model seismic wave propagation at the interface between a fluid and a porous medium. Each medium is represented by a different mesh and the two meshes are connected through the above described characteristics domain-decomposition method. We show an experiment for sealed pore boundary conditions, where we first compare the numerical solution to an analytical solution. We then show the influence of heterogeneity and viscosity of the pore fluid on the propagation of the Stoneley wave and surface waves in general.

PEG-b-PPS diblock copolymer aggregates for hydrophobic drug solubilization and release: cyclosporin A as an example

Micelles formed from amphiphilic block copolymers have been explored in recent years as carriers for hydrophobic drugs. In an aqueous environment, the hydrophobic blocks form the core of the micelle, which can host lipophilic drugs, while the hydrophilic blocks form the corona or outer shell and stabilize the interface between the hydrophobic core and the external medium. In the present work, mesophase behavior and drug encapsulation were explored in the AB block copolymeric amphiphile composed of poly(ethylene glycol) (PEG) as a hydrophile and poly(propylene sulfide) PPS as a hydrophobe, using the immunosuppressive drug cyclosporin A (CsA) as an example of a highly hydrophobic drug. Block copolymers with a degree of polymerization of 44 on the PEG and of 10, 20 and 40 on the PPS respectively (abbreviated as PEG44-b-PPS10, PEG44-b-PPS20, PEG44-b-PPS40) were synthesized and characterized. Drug-loaded polymeric micelles were obtained by the cosolvent displacement method as well as the remarkably simple method of dispersing the warm polymer melt, with drug dissolved therein, in warm water. Effective drug solubility up to 2 mg/mL in aqueous media was facilitated by the PEG- b-PPS micelles, with loading levels up to 19% w/w being achieved. Release was burst-free and sustained over periods of 9-12 days. These micelles demonstrate interesting solubilization characteristics, due to the low glass transition temperature, highly hydrophobic nature, and good solvent properties of the PPS block

WH-Constructions in Cape Verdean Creole

This dissertation concerns two types of wh-constructions – interrogative and relative clauses – of Cape Verdean Creole (CVC), a Portuguese-based Creole language spoken on the archipelago of Cape Verde, specifically the variety spoken on Santiago Island, in the coast of West Africa. Chapter 2 focus on some aspects of the syntax of CVC, claiming that the possibilities of S-V inversion are very limited and that verbs stay in Vº, except for the Present tense form of the copula verb e ‘to be’, which is the spell out of the formal feature [Present] of T. It is proposed that CVC exhibits a clause functional structure that is similar to English: [CP [TP [NegP [AspP [VP … ]]]]]. In this chapter, it is also suggested that a non Split-CP, based on the formal features [±D, ±V, ±Q, ±Wh, ±T], correctly accounts for the distribution of the complementizers in CVC. Chapter 3 presents the wh-question formation strategies exhibited by CVC, showing that some of them involve Move, while others do not. Considering CVC data, it is said that the language has two clausal typing processes: an ambiguous complementizer ki ([±Q, ±Wh]), whose checking domain is strictly local; and an unambiguous complementizer Ø ([+Q, +Wh]), whose checking domain is not strictly local. The first one derives fronted wh-questions and the second one accounts for wh-in- -situ. Chapter 4 describes the relativization strategies displayed by CVC, focusing on the fact that PP pied-piping is ruled out and that resumption is possible both inside and outside syntactic islands. It is suggested a revision of Bianchi’s (2002a) head raising analysis for the structure of relative clauses. Chapter 5 discusses the properties of the defective copy strategy ([wh[+PL] … el]) and presents evidence in favor of a distinction between this type of wh-strategy and resumption ([wh[+PL] … es]). It is argued that the language requires an overt pronominal form (3SG) to occur in the complement position of the preposition because CVC types the clause with a complementizer ki [uCat +D] and does not allow for preposition incorporation. The set of formal features of the lower copy is ‘shrinked’, i.e. the features are deleted but not erased, being accessible to PF. This analysis of the defective copy xiv strategy predicts that it only applies to PPs and that it is an autonomous process involving wh-movement, which is distinct from resumption.

A Cross-linguistic comparison of copular predication

This paper explores the syntax of copular predication withn and across the varletles of cape verdean creole briging new insights about the morpho-synactic properies of the copula with respect to funcional and lexical categories

Adolescent support networks in a health care context: the interface between health, family and education

AbstractOBJECTIVEAnalyze adolescents' perceptions about support networks and their health needs.METHODAnalytical and interpretive study using focus groups conducted in municipal state schools in Fortaleza, in the State of Ceará during the first semester of 2012. The sample comprised 36 male and female adolescents aged between 13 and 16 years attending the ninth grade of the second phase of elementary school.RESULTSThematic analysis revealed that the health care support network and interaction between health professionals, education professionals and family members was insufficient, constituting a lack of an integrated network to enable and provide support for health promotion.CONCLUSIONCoordination between education, health and family services has the potential to act as a support network to help meet adolescents' healthcare needs and demands.

Biana: a software framework for compiling biological interactions and analyzing networks

Background: The analysis and usage of biological data is hindered by the spread of information across multiple repositories and the difficulties posed by different nomenclature systems and storage formats. In particular, there is an important need for data unification in the study and use of protein-protein interactions. Without good integration strategies, it is difficult to analyze the whole set of available data and its properties.Results: We introduce BIANA (Biologic Interactions and Network Analysis), a tool for biological information integration and network management. BIANA is a Python framework designed to achieve two major goals: i) the integration of multiple sources of biological information, including biological entities and their relationships, and ii) the management of biological information as a network where entities are nodes and relationships are edges. Moreover, BIANA uses properties of proteins and genes to infer latent biomolecular relationships by transferring edges to entities sharing similar properties. BIANA is also provided as a plugin for Cytoscape, which allows users to visualize and interactively manage the data. A web interface to BIANA providing basic functionalities is also available. The software can be downloaded under GNU GPL license from http://sbi.imim.es/web/BIANA.php.Conclusions: BIANA's approach to data unification solves many of the nomenclature issues common to systems dealing with biological data. BIANA can easily be extended to handle new specific data repositories and new specific data types. The unification protocol allows BIANA to be a flexible tool suitable for different user requirements: non-expert users can use a suggested unification protocol while expert users can define their own specific unification rules.