Trade of Heilongjiang Province (China) with Russia

Local trade between the Far East region of the USSR and the Northeast region of the People’s Republic of China started in 1957, arranged by the public trade organizations in the respective borderlands. Heilongjiang Province of China has been the main actor in trade with the Far East region of the USSR, and more recently, Russia. After 1957, Heilongjiang Province’s trade with the Russian Far East developed rapidly until 1993, except a period of interruption (1967-1982). Thereafter, the Heilongjiang Province’s trade with the Russian Far East underwent a stagnation period (1994-1998), a recovery period (1999-2001), a rapid development period (2002-2007) and a period of change of tendencies and radical decrease (2008-2009). Heilongjiang Province’s trade with the Russian Far East consists of three main forms: general trade, Chinese-style border trade (Bianjing Trade which includes Bianjing Small Trade and trade between private persons (Hushi Trade)) and Travel Trade. The rapid increase of Heilongjiang Province’s trade with the Russian Far East from 2002 to 2007 is mainly attributable to the increase in the export of ordinary consumer goods, especially textile clothing and footwear, and to Bianjing Small Trade.

Development of land rental market and its effect on household farming in rural China : an empirical study in Zhejiang Province

This paper investigates the impact of land rental market development on the efficiency of labor allocation and land utilization in rural China. To test the hypothesis that the shadow wage of a rent-in household with limited off-farm opportunities will increase with the development of a land rental market for households, a statistical comparison between the shadow wage and the estimated market wage was conducted. The results showed that the shadow wage for both rent-in households and non-rent-in households was significantly lower than the market wage, but that the wage for the rent-in households was statistically higher than that for non-rent-in households in Fenghua and Deqing, the two counties surveyed in this study. In addition, the estimated marginal product of farmland for rent-in households was statistically higher than the actual land rent that those households paid, while a null hypothesis that the actual rental fee accepted by rent-out households is equivalent to the marginal product of farmland for those households was not rejected in Fenghua county where land transactions by mutual agreement were more prevalent. These results indicate that the development of the land rental market facilitates the efficiency of labor allocation and farmland utilization in rural China.

Propuesta de caracterización tipológica de yacimientos españoles de metales preciosos

Last decade's intensive exploration for precious metals in Spain led to a new understanding of various types of deposits and prospects and to the modification of previous schemes, allowing the systematic (typogical) c1assification of the Spanish precious metals deposits shown in Table 1: 9 large groups and 79 types are defined in the framework of the Iberian Geology. Hypogene deposits in the Hercynian Hesperian Massif, and epithermal gold deposits in the Neogene calc-alcaline Volcanic Province of SE Spain have been very much explored and are therefore emphasized, although their mining production is by far not to compare with the precious metals output from the SW Iberian Pyrite Belt. The exploration significance of the main types and some problems for future research are discussed.

Effects on the shallow aquifers by CO2 leakages in a tertiary basin (province of Murcia, Spain)

Geological storage of CO2 is nowadays internationally considered as the most effective method for greenhouse gas emission mitigation, in order to minimize its effects on the global climatology. One of the main options is to store CO2 in deep saline aquifers at more than 800m depth, because it reaches its supercritical state. Study of the CO2 natural accumulations as natural analogues of an artificial CO2 storage is very useful in order to understand the CO2 long term behaviour and thus to predict its possible impact on the surficial environment and life. Therefore the main objective of this work is to detect the affection of the CO2 leakages from a deep saline aquifer on the shallow aquifers, all of them located in the Gañuelas-Mazarrón Tertiary basin (Province of Murcia, Spain). This CO2 storage and leakage natural system can be analogous to an artificial CO2 storage with leakage phenomena. In order to reach these objectives, groundwaters from different aquifers in the site have been sampled and analysed for major elements, free and dissolved gases and stable isotopes, particularly ∂ 13 C and 3 He/ 4 He. The results obtained allow to conclude that this natural system is an interesting example of natural analogue for an artificial CO2 storage affected by leakage processes because the shallow fresh aquifers in the site are polluted by CO2 from the deep saline aquifer as a consequence of an intensive over-exploitation of these freshwater aquifers

Soil-Borne Pathogens Associated to New Crops of Cherry Tomato in the Province of Granada Spain

Soil-Borne Pathogens Associated to New Crops of Cherry Tomato in the Province of Granada Spain

Extending ASSERT for HW/SW Co-design

Embedded systems are commonly designed by specifying and developing hardware and software systems separately. On the contrary, the hardware/software (HW/SW) co-development exploits the trade-offs between hardware and software in a system through their concurrent design. HW/SW Codevelopment techniques take advantage of the flexibility of system design to create architectures that can meet stringent performance requirements with a shorter design cycle. This paper presents the work done within the scope of ESA HWSWCO (Hardware-Software Co-design) study. The main objective of this study has been to address the HW/SW co-design phase to integrate this engineering task as part of the ASSERT process (refer to [1]) and compatible with the existing ASSERT approach, process and tool, Advances in the automation of the design of HW and SW and the adoption of the Model Driven Architecture (MDA) [9] paradigm make possible the definition of a proper integration substrate and enables the continuous interaction of the HW and SW design paths.

Continuous multi-criteria methods for crop and soil conservation planning on La Colacha (Río Cuarto, Province of Cordoba, Argentina)

Agro-areas of Arroyos Menores (La Colacha) west and south of Rand south of R?o Cuarto (Prov. of Cordoba, Argentina) basins are very fertile but have high soil loses. Extreme rain events, inundations and other severe erosions forming gullies demand urgently actions in this area to avoid soil degradation and erosion supporting good levels of agro production. The authors first improved hydrologic data on La Colacha, evaluated the systems of soil uses and actions that could be recommended considering the relevant aspects of the study area and applied decision support systems (DSS) with mathematic tools for planning of defences and uses of soils in these areas. These were conducted here using multi-criteria models, in multi-criteria decision making (MCDM); first of discrete MCDM to chose among global types of use of soils, and then of continuous MCDM to evaluate and optimize combined actions, including repartition of soil use and the necessary levels of works for soil conservation and for hydraulic management to conserve against erosion these basins. Relatively global solutions for La Colacha area have been defined and were optimised by Linear Programming in Goal Programming forms that are presented as Weighted or Lexicographic Goal Programming and as Compromise Programming. The decision methods used are described, indicating algorithms used, and examples for some representative scenarios on La Colacha area are given.

GreenDisc: a HW/SW energy optimization framework in globally distributed computation

In recent future, wireless sensor networks (WSNs) will experience a broad high-scale deployment (millions of nodes in the national area) with multiple information sources per node, and with very specific requirements for signal processing. In parallel, the broad range deployment of WSNs facilitates the definition and execution of ambitious studies, with a large input data set and high computational complexity. These computation resources, very often heterogeneous and driven on-demand, can only be satisfied by high-performance Data Centers (DCs). The high economical and environmental impact of the energy consumption in DCs requires aggressive energy optimization policies. These policies have been already detected but not successfully proposed. In this context, this paper shows the following on-going research lines and obtained results. In the field of WSNs: energy optimization in the processing nodes from different abstraction levels, including reconfigurable application specific architectures, efficient customization of the memory hierarchy, energy-aware management of the wireless interface, and design automation for signal processing applications. In the field of DCs: energy-optimal workload assignment policies in heterogeneous DCs, resource management policies with energy consciousness, and efficient cooling mechanisms that will cooperate in the minimization of the electricity bill of the DCs that process the data provided by the WSNs.

GreenDisc: a HW/SW energy optimization framework in globally distributed computation

In recent future, wireless sensor networks ({WSNs}) will experience a broad high-scale deployment (millions of nodes in the national area) with multiple information sources per node, and with very specific requirements for signal processing. In parallel, the broad range deployment of {WSNs} facilitates the definition and execution of ambitious studies, with a large input data set and high computational complexity. These computation resources, very often heterogeneous and driven on-demand, can only be satisfied by high-performance Data Centers ({DCs}). The high economical and environmental impact of the energy consumption in {DCs} requires aggressive energy optimization policies. These policies have been already detected but not successfully proposed. In this context, this paper shows the following on-going research lines and obtained results. In the field of {WSNs}: energy optimization in the processing nodes from different abstraction levels, including reconfigurable application specific architectures, efficient customization of the memory hierarchy, energy-aware management of the wireless interface, and design automation for signal processing applications. In the field of {DCs}: energy-optimal workload assignment policies in heterogeneous {DCs}, resource management policies with energy consciousness, and efficient cooling mechanisms that will cooperate in the minimization of the electricity bill of the DCs that process the data provided by the WSNs.

Un Primer Paso a la agilidad: Retrospectivas para el aprendizaje de la ingeniería del SW

En los últimos años la industria software demanda, cada vez más, ingenieros que posean conocimientos y experiencia en la aplicación de metodologías ágiles. Los principios y valores en los que se basan las metodologías ágiles fomentan la adquisición de competencias como la capacidad de organización, el trabajo en equipo, la comunicación, o el liderazgo, entre otras, denominadas en el marco del Espacio Europeo de Educación Superior (EEES) como competencias generales o transversales. Ambas razones justifican la adopción de las metodologías ágiles como métodos de aprendizaje activos, es decir, la implantación de metodologías ágiles durante el ciclo formativo del ingeniero software. Esta apuesta se ha materializado en el proyecto de innovación educativa Agile Learning - Aprendizaje Ágil, cuyos primeros pasos, resultados y lecciones aprendidas se presentan en este artículo.

Rammed earth walls in the late middle age castles in the actual province of Soria, Spain

This paper analyzed the building techniques based in the use of rammed earth in the Late Medieval fortifications in the province of Soria, Spain. The manorial castles of Serón de Nágima and Yanguas were built completely with rammed earth. However, these techinques are different. Through the study of the constructive signals, we can reconstruct the constructive process and made an hypothesis of the auxiliary scaffolding necessary for the construction. After, other four cases in which there is presence of rammed earth are described: Ágreda, Arcos de Jalón, Caracena and the tower of Martín González or castle of La Raya (the Border). Rammed earth is used in some secondary architectural elements and also as a filling of the masonry walls, but somtimes there are ancient rammed earth walls overlaid with stone masonry.

GIS for cartographic accuracy analysis of settlements in the province of Madrid (AGE Tomas Lopez 1804).

Purpose: In this paper we study all settlements shown on the map of the Province of Madrid, sheet number 1 of AGE (Atlas Geográfico de España of Tomas Lopez 1804) and their correspondence with the current ones. This map is divided in to zones: Madrid and Almonacid de Zorita. Method: The steps followed in the methodology are as follow: 1. Geo-reference of maps with latitude and longitude framework. Move the historical longitude origin to the origin longitude of modern cartography. 2 Digitize of all population settlements or cities (97 on Madrid and 42 on Almonacid de Zorita), 3 Identify historic settlements or cities corresponding with current ones. 4. If the maps have the same orientation and scale, replace the coordinate transformation of historical settlements with a new one, by a translation in latitude and longitude equal to the calculated mean value of all ancient map points corresponding to the new. 5. Calculation of absolute accuracy of the two maps. 6 draw in the GIS, the settlements accuracy. Result: It was found that all AGE settlements have good correspondence with current, ie only 27 settlements lost in Madrid and 2 in Almonacid. The average accuracy is 2.3 and 5.7 km to Madrid and Almonacid de Zorita respectively. Discussion & Conclusion: The final accuracy map obtained shows that there is less error in the middle of the map. This study highlights the great work done by Tomas Lopez in performing this mapping without fieldwork. This demonstrates the great value that has been the work of Tomas Lopez in the history of cartography.