Theoretical study on behaviour of superplastic forming/diffusion bonding of bulk metallic glasses

Based on the behaviour of the superplastic deformation of metallic glasses and Pilling’s model, a diffusion bonding model suitable for metallic glasses is proposed in the present study. In the current model, the diffusion bonding processes consists of two stages: one is the plastic deformation stage and the other is the void shrinkage stage, in which, the atom diffusion and superplastic deformation are responsible for the void shrinkage. Applying this model to the diffusion bonding of a Zr based metallic glass, the predicted bonding time is in good agreement with the experimental result. A map for determining the bonding temperature and time to achieve high quality bonding in a Zr based metallic glass is suggested.

Restoration of the habitat-forming fucoid alga Hormosira banksii at effluent-affected sites : competitive exclusion by coralline turfs

Fucoid algae often dominate intertidal rocky shores, providing habitat and modifying ecosystem resources for other species, but are susceptible to discharge of sewage effluent. In this study we assessed the potential for competition from coralline turfs to inhibit restoration of the intertidal fucoid macroalga Hormosira banksii at sites associated with an ocean outfall a scenario of improving following water quality in the nearshore coastal environment. The percentage cover and number of individuals of H. banksii were negatively correlated with both the percentage cover and turf height of Corallina officinalis. In contrast, H. banksii was positively associated with rocky substrata and recruited well to rock-surface substrata. Importantly, there appears to be a threshold abundance where the percentage cover of H. banksii rarely reaches above 20% cover amongst coralline turfs with >40% cover. These data support a model of alternative community states: H. banksii dominated canopy on rocky substrata versus C. officinalis turf. In field and laboratory experiments, extensive coralline turfs (up to 4 cm thick) were shown to inhibit recruitment of H. banksii. This study shows competitive exclusion by coralline turfs may limit the successful restoration of habitat provided by H. banksii to shores that have been affected by sustained discharge of secondarily treated sewage effluent. We suggest potential strategies for management authorities to consider when seeking ways of restoring fucoid communities affected by anthropogenic disturbances such as wastewater disposal.

Formability and forming of advanced steels

The thesis identified how advanced high strength steels perform compared to conventional steels in terms of weight reduction and crash performance for automotive bodies. The novel production method of low pressure tube hydroforming was applied to form these advanced steels to reduce the press tonnage and fluid pressure compared to the conventional high pressure process. In addition analytical models were developed to predict the force and pressure in the low pressure process.

The star and celebrity confessional

In this book the different manifestations, meanings, and processes of the star and celebrity confessional will be explored.

The confessional is taken to be any moment in which a star, celebrity, or fan engages in revelatory acts that are considered to be authentic, heart-felt, and honest. These confessional encounters can take place in an interview, through performance and presentation events, online, and in ‘unscripted’ encounters. A star may break down in tears, or reveal a previously unknown truth about their private life. However, this authenticity is often found to have been manufactured, or is timed to occur against a new release or product launch. Alternatively, the desire to confess may be seen to draw attention to the centrality of pseudo forms of emotion in contemporary culture and the obsessional behaviour it produces. In this book authors consider acts of confession by celebrities such as Tom Cruise, Michael Jackson, Jade Goody, Britney Spears, Sarah Jessica Parker, Tracey Emin, and Russell Crowe.

Forming and sustaining partnerships to provide integrated services for young people : an overview based on the headspace Geelong experience

Aim: To discuss critical considerations in the formation and maintenance of agency partnerships designed to provide integrated care for young people.

Methods: Two years after its establishment, an evaluation of the headspace Barwon collaboration and a review of the health-care and management literature on agency collaboration were conducted. The principal findings together with the authors' experience working at establishing and maintaining the partnership are used to discuss critical issues in forming and maintaining inter-agency partnerships.

Results: Structural and process considerations are necessary but not sufficient for the successful formation and maintenance of inter-agency partnerships and integrated care provision. Specifically, organizational culture change and staff engagement is a significant challenge and planning for this is essential and often neglected.

Conclusions: Although agreeing on common goals and objectives is an essential first step in forming partnerships designed to provide integrated care, goodwill is not enough, and the literature consistently shows that most collaborations fail to meet their objectives. Principles and lessons of organizational behaviour and management practices in the business sector can contribute a great deal to partnership planning.

Numerical simulations on warm forming of stainless steel with trip-effect

In steels with TRIP-effect, a phase transformation from the retained-austenite to martensite occurs during forming, and it significantly affects hardening behaviours. Such an effect is sensitive to the amount of strain as well as the temperature variation. For materials with a strong TRIP-effect, new forming techniques are needed to develop that can lead to lighter and stronger components in automotive industry. This paper presents a coupled thermo-mechanical finite element modelling and simulation of a warm deep drawing of austenitic stainless steel (including a TRIP-effect) using LS-DYNA and temperature effect on forming process of such materials is investigated.

Characterising material and process variation effects on springback robustness for a semi-cylindrical sheet metal forming process

Variation in the incoming sheet material and fluctuations in the press setup is unavoidable in many stamping plants. The effect of these variations can have a large influence on the quality of the final stamping, in particular, unpredictable springback of the sheet when the tooling is removed. While stochastic simulation techniques have been developed to simulate this problem, there has been little research that connects the influence of the noise sources to springback. This paper characterises the effect of material and process variation on the robustness of springback for a semi-cylindrical channel forming operation, which shares a similar cross-section profile as many automotive structural components. The study was conducted using the specialised sheet metal forming package AutoForm^TM Sigma, for which a series of stochastic simulations were performed with each of the noise sources incrementally introduced. The effective stress and effective strain scatter in a critical location of the part was examined and a response window, which indicates the respective process robustness, was defined. The incremental introduction of the noise sources allows the change in size of the stressstrain response window to be tracked. The results showed that changes to process variation parameters, such as BHP and friction coefficient, directly affect the strain component of the stressstrain response window by altering the magnitude of external work applied to forming system. Material variation, on the other hand, directly affected the stress component of the response window. A relationship between the effective stressstrain response window and the variation in springback was also established.

Portrait of a star : National Gallery of Victoria

Museums are an important segment of the creative industries arena. A "star" art museum in Melbourne, Australia, is the National Gallery of Victoria, whose mission is to illuminate life by collecting and presenting great art. This gallery operates in an increasingly competitive landscape. It is becoming more competitive and is continuously striving to achieve its own ambitions and meet the expectations of multiple stakeholders. The present case study uses a brand orientation lens to evaluate the Gallery in order to address a gap in both the brand orientation and the museum marketing literature. It is crafted from interviews, surveys and internal documents. The case study is an exemplar for other institutions to identify how brand orientation manifests itself within their institution.

Material flow forming the shoulder flow zone using scroll shoulder tool during friction stir welding of thick section aluminum alloys

Scroll shoulder tools are widely used and they do not need to be tilted during friction stir welding (FSW). However, the detailed material flow, which is important for proper scroll shoulder tool design and subsequently for forming the defect-free shoulder flow zone, has not been fully explained. In the present study, features of material flow in shoulder flow zone, during FSW of thick 6061 aluminium (Al) plates using a scroll shoulder tool were investigated. It was observed that there is a simple layer-to-layer banded structure which appears in the bottom portion of shoulder flow zone, but disappears in the top portion of this weld zone. When the scroll shoulder tool is plunged into the workpiece to a determined depth, the workpiece material is extruded by the tool pin, and pushed up into the scroll groove beneath the shoulder forming the pick-up material. During the forward movement of the tool, the central portion of pick-up material was driven downward by the root portion of pin and then it detaches from the tip portion of pin in a layer-to-layer manner to form the weld.

Modelling of bending-dominated forming processes of metal sheets

Theoretical solutions, finite element models, and experimental techniques are developed for three major sheet metal forming operations: bending (pure bending and cyclic bending), die bending, and deep drawing. These have been applied to two different commercial quality cold-rolled steels, one stainless steel, and one magnesium alloy.

Review of approximate analyses of sheet forming processes

Approximate models are often used for the following purposes: in on-line control systems of metal forming processes where calculation speed is critical; to obtain quick, quantitative information on the magnitude of the main variables in the early stages of process design; to illustrate the role of the major variables in the process; as an initial check on numerical modelling; and as a basis for quick calculations on processes in teaching and training packages. The models often share many similarities; for example, an arbitrary geometric assumption of deformation giving a simplified strain distribution, simple material property descriptions - such as an elastic, perfectly plastic law - and mathematical short cuts such as a linear approximation of a polynomial expression. In many cases, the output differs significantly from experiment and performance or efficiency factors are developed by experience to tune the models. In recent years, analytical models have been widely used at Deakin University in the design of experiments and equipment and as a pre-cursor to more detailed numerical analyses. Examples that are reviewed in this paper include deformation of sandwich material having a weak, elastic core, load prediction in deep drawing, bending of strip (particularly of ageing steel where kinking may occur), process analysis of low-pressure hydroforming of tubing, analysis of the rejection rates in stamping, and the determination of constitutive models by an inverse method applied to bending tests.

Springback data from stamping and simulating the forming of advanced high strength steel

This dataset is comprised of a spreadsheet of simulation result files, cross-section geometries of stamped parts, strain results of cross-section of stamped parts, simulation data (strain stress displacement energies), and variation data of material properties of a single coil. This data is a collection of both experimental and simulation results from industrial and laboratory stamping of advanced high strength steels (AHSS). The steels that were stamped were a typical high-strength low-alloy (HSLA) steel, a transformation-induced plasticity (TRIP) steel, a super HSLA steel, and a dual phase (DP) steel. The selected part was an automatic Ford Falcon front cross-member component using the Ford Geelong stamping plant. The variation of the material and stamped parts was also collected.

If I played piano for you

A simple composition that focusses on space and texture featuring piano, synth and vocals. a good piece for documentaries featuring space, galaxies, remote locations.