917 resultados para STACKING-FAULTS


Relevância:

10.00% 10.00%

Publicador:

Resumo:

Pós-graduação em Engenharia Elétrica - FEIS

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This work presents structural studies in the northwestern portion of the Pitanga Structural High, between the towns of Ipeúna and Charqueada. The area is composed by the sedimentary rocks from Paraná Basin, represented basically by Paleozoic rocks (Itararé Group, Tatuí, Irati and Corumbataí formations) and Mesozoics rocks (Pirambóia and Botucatu formations), in association with lower Cretaceous intrusive basic rocks expressed by dikes and sills. The most important structural features are distensive faults, which put together unleveled tectonic blocks and are frequently filled by diabase dikes. In this context, the main objective of this work is the study of local structures and the recognition of the tectonic association between dropped and uplifted blocks, jointly with the caracterization of a production, migration and storage model for hydrocarbons. Through the interpretation of aerial photos, field recognitions, structural and laboratorial analysis, a normal fault with direction of N30W and a slip of 20-25 meters located south of Ipeúna was recognized this fault puts the Tatuí and Irati Formations side by side. At this place and by the SP-191 route (north of Ipeúna city), sandstones from the top of Tatuí Formation are impregnated by asfaltic material. The data interpretation shows that local fault systems with NW directions have played a determinant part in the fault blocks arrangement, placing sandstone lenses from Tatuí Formation topographically above the oil shales from Irati Formation. In addition, these systems acted as migration paths to transport and storage hydrocarbon in sanstone lenses from Tatuí Formation

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Obtaining accurate estimates of the volume of stacked wood is important in view of the increasing value of wood as raw material. Therefore, the forest companies have become increasingly concerned about the methods currently used to convert cubic meters for stereo. In this context, emerged the need of optimizing the measurement process and accuracy of the volume of stacked wood. For this, companies have been testing methods with greater efficiency, speed and low operating cost. Existing methods made through approximate equations, and also by determining the conversion factor, called the stacking factor (Fe), are questioned, due to errors and inaccuracies. The use of digital photographs is an alternative method that would minimize operator intervention, allowing greater control and speed the process, thus eliminating part of the imprecision of the traditional method. The use of the method is viable, due to present an error of about 10% while traditional methods showed an error of 17%

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The detailed study of the Brazilian continental margin basins became possible with the advancement of geophysical tools, with emphasis on seismic reflection. Characterizing the structural and stratigraphic elements of Brazil’s marginal basins they realized that there was a relationship with structures present on the adjacent continental basement. So many works began to be made to understand this relationship and know the major factors that influenced the evolution of the continental margin. The study area of this work includes the northern portion of the Campos Basin and the continental outcropping adjacent areas, which corresponds to the northern of Rio de Janeiro state and the southern of Espirito Santo state. This area stands an important structural feature of NW-SE direction with a projection to the Campos Basin called Lineamento de Piúma. The outcropping basement rocks belongs to the Ribeira Belt which was bonded to other mobile bands forming the continent Western Gondwana during the Brasiliano Cycle, which later fragmented giving rise to the Atlantic Ocean. The opening of the ocean results on the formation of the marginal basins of Brazil. These basins have continental, transitional and marine facies. On Campos Basin the continental phase resulted on the formation of horsts and grabens bounded by synthetic and antithetic faults. Continuing rifting formed the saline lakes that deposited siliciclastic and carbonate sediments. The transitional phase resulted on thick packages consist of evaporites (halite and anhydrite) that was deposited in lagoon environment, tectonically quiet arid and semi-arid. The marine phase it deposited siliciclastic and carbonate in the Campos Basin resulting in shales, marls, limestones, ritmito, turbidites, sandstones and others. The objective of this study is to investigate the possible continuation... (Complete abstract click electronic access below)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The Itararé Group is the record of one of the most significant glaciation events of the Gondwana. Of neocarboniferous-eopermian age, this unit has facies associations interpreted as resulted from shallow marine settings with glacial and deglacial water influence. The role of glaciers on the tectonic-sedimentary processes of the Itararé Group is striking, as typical facies such as diamictites, tilites, shales and rhythmites with dropstones are generated, besides the existence of glacially striated and polished surfaces. This work had as main goal to contribute to the geological knowledge of the Itararé Group in the central eastern portion of São Paulo State, using as basis outcrops from Itu, Salto and Porto Feliz, and also pertinent bibliographic data and well profiles located in the surrounding areas. About the stratigraphic framework, genetic association and paleogeography of these deposits, this work concludes that the area studied comprises the basal section of the Itararé Group. The stacking of the facies recognized during the field work begins with the striated and polished surfaces of the basement, described in Salto, superposed by tilites and diamictites with glacial movement features. Over these are the turbidites from Itu, associated with the glacier retreat. The outcrops of Porto Feliz are at the top of this succession, with deposits generated by flows with lateral and vertical variations, sometimes with prevalence of tractive conditions, and sometimes with sediments transported largely by suspension. Paleocurrent measurements show main flow directions towards NW, the same as glacial striae, suggesting the influence of reworking of sediments by the meltwater during deglacial periods

Relevância:

10.00% 10.00%

Publicador:

Resumo:

A wedge facies cycle it‟s a body of sedimentary rock, bounded above and below by unconformity and which represents a transgressive-regressive cycle of deposition. This cycle is formed by the following succession of facies: non-marine (N), transitional-coarse texture, and marine-fine texture; The objective of this study have been members of the sandstones and Triumph Siderópolis, seconded by rare calcareous sandstones and very thin limb Paraguaçu. Through analysis of facies in wells testified by CPRM, it was possible to group on facies successions and set the standard stacking. The Triunfo Member consists of three cycles of facies, lithology whose standard indicates a vertical arrangement ''type'' tuning up, other words, a component sandy bottom in the form of '' box'', followed by components sandy-clayey and clayey-carbonaceous (1st and 2nd cycle) and / or shale and limestone (3rd cycle), represented by the base member Paraguaçu. The first cycle only occurs on NF-5 wells and NF-6 in the form of Onlap channel dug in post-Itararé group. The cycle II also reaches wells NF-4 and NF-3 to the north, while the cycle III reaches the southern area, well NF-9. The member Paraguaçu, well PP-25 is predominantly clay-síltico, also stand out limestones and sandstones. The limestones are not coastal marine organisms probably connected with the algae and cyanobacteria, the sandstones are fine-textured, very thin and coastal deposition environment. The member Siderópolis, well NF-2 consists of a sandstone fluvial-estuarine deployed in the valley section, and succeeded by sandstones and siltstones bioturbed, they have linked the transgression of the Fm. Palermo

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The Aquidauana Formation is characterized by sandstones of variable granulation, mudstones and diamectites abundant in clay, typical colors like brick red (vermelho tijolo) of glacial, fluvial and lacustrine origin. It’s chronostratigraphic equivalent to the Itarará group from the Neo Carboniferous age, that under the exploratory view, such units represent important intervals in the basin, occurring together with them minerals as well as energy resources as petroleum, underground water and coal – what requires a great paleogeography and stratigraphy knowledge for its exploration. By gathering information from the columnar sections of the area, it was possible to characterize the sedimentary facies, the stacking pattern as well as the association. It was also made an attempt of stratigraphic correlation, which showed great difficulties since glacial environments present a great lateral discontinuity of the facies besides the complex relationship process of formation. As a result, it was obtained 8 sedimentary facies, the lateral and vertical relations and genesis process. It is proposed that the sedimentary environment in the study area is the fluvio glacial, characterized by alluvial systems formed by defrosted water which transport the sediments that are deposited in plains in front of the glacier (distal outwash). Petrographic thin section analysis showed that the transportation process was ineffective. The grains present punctual to lobular contacts, characterizing good porosity and permeability to the rock, varying these qualities according to more or less existence of matrix. The presence of Iron Oxide deposited between the recrystallization border and feldspathic mineral indicates that this rock has possibly presented a primary rubefaction, intensified by alkaline fluid percolation

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The area of this work is located along the Northern portion of the Pelotas´s basin. The onshore region extends from the Southern portion São Paulo State to the North of Rio Grande do Sul State, with a total area of 440 530 km ². The objective of the research is to characterize the main geological structures of the outcropping basement in the Paraná Basin and its correlation with the offshore portion of the Pelotas Basin. The characterization was performed through the integration of surface (SRTM images and outcrops) and subsurface data (seismic data and well logs), the method includes the use of remote sensing techniques and seismic interpretation. The main structures to be analyzed are the Tibagi Lineament and the “Torres Syncline in order to verify its influence on the geological evolution and deformation of the basin. As result, it was identified the continuity of the both structures inside the offshore basin (Pelotas Basin); but only the Tibagi Lineament represents an important structural feature in the offshore basin. In this sense, the Tibagi lineament shows a NW-SE direction along the both basins (Pelotas and Paraná) and it is defined by drainages and relief on the continental portion. It was classified as a graben structure limited by normal faults and it also was verified a trend of faults inside the lineament that cuts all the sedimentary package of Itararé Group from Paraná Basin. The Torres syncline is a structure that connects the arches of Ponta Grossa and Rio Grande, showing NW-SE orientation and a low angle dip in the NW direction. Its projection into the Pelotas Basin was not recognized by the methods applied in this work, because a preliminary analyze indicates that its projection corresponds to a structural high inside the Pelotas Basin

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Results of apatite fission tracks from twelve samples collected across a Borborema Province transect, northeastern Brazil, revealed two major paleothermal events: a cooling event occurred between Albian and late Cenomanian (110 - 80 Ma) and a second cooling event starting on early Paleocene (66 Ma). Given the wide expression of the studied area (sampling trend along four brazilian states) a correlation between the distribution of fission track data and the current geological / geomorphological scenario was made possible, considering the area’s tectono - stratigraphic past and its thermochronologic evolution until now. The fact that the employed thermochronologic tool relates to a relatively shallow geothermometer, substancially information for understanding the behavior of basement brittle tectonic was achieved. These data were used to analyze faults origin and reactivation, associated with sedimentary basins evolution in the context of South America - Africa continental breakup.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The study area is the Garoupa Field, located 75 km from the coast of Rio de Janeiro in bathymetric elevation of 125 m and it is the first important offshore discovery of the Campos Basin with hydrocarbon production in the Albian carbonates. The high significance of carbonate rock reservoirs for the global oil industry and its degree of complexity, combined with the fact that the Garoupa Field is a mature field, make this research project interesting to develop a re-exploratory vision of the study area. The objective of this paper is to characterize the physical properties of the Macae Group reservoirs in the Garoupa Field through well correlation techniques, petrophysical analysis and seismic interpretation (3D), in order to evaluate qualitatively and quantitatively the response of geophysical data to the presence of carbonate rock reservoirs. From the analysis of well profiles (gamma ray, resistivity, density and sonic) it was possible to identify six reservoir levels in the Quissamã Formation. As a result, the reservoirs have good correlation between the wells in the Garoupa Field and show lateral facies variation. In the seismic interpretation, structural contour maps were generated in time (ms) from the top of the Macae Group and two horizons that correspond to the reservoir levels. These maps show that the oil producing area of this field is a structural high located at the west of the interpreted seismic cube, and it was classified as a rollover limited by lateral faults forming a horst. The seismic attribute maps show a good response to the reservoirs of the Garoupa Field because they are associated with amplitude anomalies, verified by the correlation between the physical properties of the reservoir rock and seismic data through cross plots, with emphasis in a linear correlation between the resistivity profile and the values of Maximum Absolute Amplitude and RMS Amplitude attributes

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Important deposits of Zn-Pb associated with the Vazante Group, and Au in Group Canastra occur in the Vazante-Paracatu region (MG). They are located in the Brasília Fold Belt, which was generated from a convergent tectonic in the Brasiliano cycle, forming a complex system of imbricated nappes and faults. This study aims to characterize stratigraphic, structural and metamorphic aspects of an area, located in the Salobo’s farm region. A geological mapping in 1:20,000 scale was executed in order to identify the outcropping lithotypes and to collect structural measures. Drill holes were described to support the surface data and samples were selected for the preparation of thin and polished sections. In this context, the occurrence of rock types and hydrothermal processes that had not been previously described were found, for example layers of phosphatic quartzite in the Serra do Poço Verde Formation (SPV), hydrothermal hematites from martitization magnetite in contact by detachment of the Serra do Garrote Formation and SPV in the Vazante Group and layers of microbanded iron formations in Paracatu Formation (Canastra Group). In the area, four deformational phases were recognized, occurring progressively, in which two of them are related to convergent tectonic, with the development of thrust faults, one is associated to tectonic escape and/or reactivation of basement faults and the last has a distensive character, representing the post-convergence relaxation. The metamorphism in the area was subgreenschist facies, reaching lower greenschist, with temperatures up to 350°C

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The Linguado Field is located in the extreme southwest portion of Campos Basin. It’s associated with Structural Badejo High and can be divided in two groups of faults: one manly formed by antithetic faults, with NW-SE direction, continuous to Badejo Fault, and another identified by N-S faults. Besides these faults had affected the basement and the stratification of basin, these systems also had contributed to coquina permoporosity development, that show 80% of recoverable oil volume of the field. The carbonate marine sequence, Albian age, it was deposited under the salt. This forms structures as like as pillows and raft as a result of the halocinese. Structurally the Linguado Field coquina has monoclinal direction with east dip, it’s cut by faults with slip up to 50 meters. In addition to structural control, stratigraphy and diagenesis also were important to carbonate trap oil. The identification of recoverable oil levels in the low phase of the coquina from Lagoa Feia Group was done by well data. The seismic 2D and 3D, with the well data, was used to structural interpretation to regional scale either to reservoir scale.