A Review of Indirect Bridge Monitoring Using Passing Vehicles

Indirect bridge monitoring methods, using the responses measured from vehicles passing over bridges, are under development for about a decade. A major advantage of these methods is that they use sensors mounted on the vehicle, no sensors or data acquisition system needs to be installed on the bridge. Most of the proposed methods are based on the identification of dynamic characteristics of the bridge from responses measured on the vehicle, such as natural frequency, mode shapes, and damping. In addition, some of the methods seek to directly detect bridge damage based on the interaction between the vehicle and bridge. This paper presents a critical review of indirect methods for bridge monitoring and provides discussion and recommendations on the challenges to be overcome for successful implementation in practice.

Extracting statistically dominant modes of a steel truss bridge from vehicle-induced vibrations

This study is intended to investigate the validity of the stability diagram (SD) aided multivariate autoregressive (MAR) analysis for identifying modal parameters of a real truss bridge. The MAR models are adopted to fit the time series of the dynamic accelerations recorded from a number of observation points on the bridge; then the modal parameters are extracted from the MAR model coefficient matrix. The SD is adopted to determine statistically dominant modes. In plotting the SD, a number of stability criteria are further adopted for filtering out those modes with unstable modal parameters. By the present method, the first five modal frequencies and mode shapes are identified with very high precision, while the damping ratios are identified with high precision for the 1st mode but with poorer precision for higher modes. Moreover, the ability of the SD in selecting structural modes without getting involved in any model-order optimization problem is highlighted through a comparison study.

Elastodynamic Modeling and Analysis for an Exechon Parallel Kinematic Machine

As a newly invented parallel kinematic machine (PKM), Exechon has attracted intensive attention from both academic and industrial fields due to its conceptual high performance. Nevertheless, the dynamic behaviors of Exechon PKM have not been thoroughly investigated because of its structural and kinematic complexities. To identify the dynamic characteristics of Exechon PKM, an elastodynamic model is proposed with the substructure synthesis technique in this paper. The Exechon PKM is divided into a moving platform subsystem, a fixed base subsystem and three limb subsystems according to its structural features. Differential equations of motion for the limb subsystem are derived through finite element (FE) formulations by modeling the complex limb structure as a spatial beam with corresponding geometric cross sections. Meanwhile, revolute, universal, and spherical joints are simplified into virtual lumped springs associated with equivalent stiffnesses and mass at their geometric centers. Differential equations of motion for the moving platform are derived with Newton's second law after treating the platform as a rigid body due to its comparatively high rigidity. After introducing the deformation compatibility conditions between the platform and the limbs, governing differential equations of motion for Exechon PKM are derived. The solution to characteristic equations leads to natural frequencies and corresponding modal shapes of the PKM at any typical configuration. In order to predict the dynamic behaviors in a quick manner, an algorithm is proposed to numerically compute the distributions of natural frequencies throughout the workspace. Simulation results reveal that the lower natural frequencies are strongly position-dependent and distributed axial-symmetrically due to the structure symmetry of the limbs. At the last stage, a parametric analysis is carried out to identify the effects of structural, dimensional, and stiffness parameters on the system's dynamic characteristics with the purpose of providing useful information for optimal design and performance improvement of the Exechon PKM. The elastodynamic modeling methodology and dynamic analysis procedure can be well extended to other overconstrained PKMs with minor modifications.

A practical taxonomy of methods and literature for managing uncertain spatial data in geographic information systems

Perfect information is seldom available to man or machines due to uncertainties inherent in real world problems. Uncertainties in geographic information systems (GIS) stem from either vague/ambiguous or imprecise/inaccurate/incomplete information and it is necessary for GIS to develop tools and techniques to manage these uncertainties. There is a widespread agreement in the GIS community that although GIS has the potential to support a wide range of spatial data analysis problems, this potential is often hindered by the lack of consistency and uniformity. Uncertainties come in many shapes and forms, and processing uncertain spatial data requires a practical taxonomy to aid decision makers in choosing the most suitable data modeling and analysis method. In this paper, we: (1) review important developments in handling uncertainties when working with spatial data and GIS applications; (2) propose a taxonomy of models for dealing with uncertainties in GIS; and (3) identify current challenges and future research directions in spatial data analysis and GIS for managing uncertainties.

Spectacle design preferences among Chinese primary and secondary students and their parents: A qualitative and quantitative study

Purpose: To identify the specific characteristics making glasses designs, particularly those compatible with adjustable glasses, more or less appealing to Chinese children and their parents. Patients and Methods: Primary and secondary school children from urban and rural China with < = -1.00 diopters of bilateral myopia and their parents ranked four conventional-style frames identified by local optical shops as popular versus four child-specific frames compatible with adjustable spectacles. Scores based on the proportion of maximum possible ranking were computed for each style. Selected children and their parents also participated in Focus Groups (FGs) discussing spectacle design preference. Recordings were transcribed and coded by two independents reviewers using NVivo software. Results: Among 136 urban primary school children (age range 9-11 years), 290 rural secondary school children (11-17 years) and 16 parents, all adjustable-style frames (scores on 0-100 scale 25.7-62.4) were ranked behind all conventional frames (63.0-87.5). For eight FGs including 12 primary children, 26 secondary children and 16 parents, average kappa values for NVivo coding were 0.81 (students) and 0.70 (parents). All groups agreed that the key changes to make adjustable designs more attractive were altering the round lenses to rectangular or oval shapes and adding curved earpieces for more stable wear. The thick frames of the adjustable designs were considered stylish, and children indicated they would wear them if the lens shape were modified. Conclusions: Current adjustable lens designs are unattractive to Chinese children and their parents, though this study identified specific modifications which would make them more appealing.

Development and Validation of a Procedure for Numerical Vibration Analysis of an Oscillating Wave Surge Converter

During extreme sea states so called impact events can be observed on the wave energy converter Oyster. In small scale experimental tests these impact events cause high frequency signals in the measured load which decrease confidence in the data obtained. These loads depend on the structural dynamics of the model. Amplification of the loads can occur and is transferred through the structure from the point of impact to the load cell located in the foundation. Since the determination of design data and load cases for Wave Energy Converters originate from scale experiments, this lack of confidence has a direct effect on the development.

Numerical vibration analysis is a valuable tool in the research of the structural load response of Oyster to impact events, but must take into account the effect of the surrounding water. This can be done efficiently by adding an added mass distribution, computed with a linearised potential boundary element method. This paper presents the development and validation of a numerical procedure, which couples the OpenSource boundary element code NEMOH with the Finite Element Analysis tool CodeAster. Numerical results of the natural frequencies and mode shapes of the structure under the influence of added mass due to specific structural modes are compared with experimental results.

k-fold Subsampling based Sequential Backward Feature Elimination

We present a new wrapper feature selection algorithm for human detection. This algorithm is a hybrid featureselection approach combining the benefits of filter and wrapper methods. It allows the selection of an optimalfeature vector that well represents the shapes of the subjects in the images. In detail, the proposed featureselection algorithm adopts the k-fold subsampling and sequential backward elimination approach, while thestandard linear support vector machine (SVM) is used as the classifier for human detection. We apply theproposed algorithm to the publicly accessible INRIA and ETH pedestrian full image datasets with the PASCALVOC evaluation criteria. Compared to other state of the arts algorithms, our feature selection based approachcan improve the detection speed of the SVM classifier by over 50% with up to 2% better detection accuracy.Our algorithm also outperforms the equivalent systems introduced in the deformable part model approach witharound 9% improvement in the detection accuracy

Holidays in the Danger Zone: Entanglements of War and Tourism

A timely, and uniquely historical, look at how war turns soldiers, and all of us, into tourists. Holidays in the Danger Zone exposes the mundane and everyday entanglements between two seemingly opposed worlds—warfare and tourism. Debbie Lisle shows how a tourist sensibility shapes the behavior of soldiers in warespecially the experiences of Western military forces in “exotic” settings. This includes not only R&R but also how battlefields themselves become landscapes of leisure and tourism. It further explores how a military sensibility shapes the development of tourism in the postwar context, from “Dark Tourism” (engaging with displays of conflict and atrocity) to exhibitions of conflict in museums and at memorial sites, as well as in advertising, film, journals, guidebooks, blogs, and photography. Focused on how war and tourism reinforce prevailing modes of domination, Holidays in the Danger Zone critically examines the long historical arc of the war-tourism nexus from nineteenth-century imperialism to World War I and World War II, from the Cold War to globalization and the War on Terror.

Measuring the shape of degree distributions

Degree distribution is a fundamental property of networks. While mean degree provides a standard measure of scale, there are several commonly used shape measures. Widespread use of a single shape measure would enable comparisons between networks and facilitate investigations about the relationship between degree distribution properties and other network features. This paper describes five candidate measures of heterogeneity and recommends the Gini coefficient. It has theoretical advantages over many of the previously proposed measures, is meaningful for the broad range of distribution shapes seen in different types of networks, and has several accessible interpretations. While this paper focusses on degree, the distribution of other node based network properties could also be described with Gini coefficients.

Conformação automática de formas complexas em vidro de mesa

Os objectivos do presente trabalho foram a investigação dos principais defeitos que ocorrem nos produtos de vidro de mesa produzidos por processos automáticos e o desenvolvimento de novos vidros e tecnologias que permitam aumentar os rendimentos de produção, ou a flexibilidade da operação de conformação. A viscosidade influencia a facilidade de conformação dos produtos. Temperaturas de gota mais baixas, espessuras de parede de produtos mais elevadas e baixas áreas de transferência térmica facilitam a ocorrência de defeitos, sobretudo mecânicos e de superfície. Foram identificados os produtos de vidro de mesa que apresentam maiores dificuldades na conformação, designados por produtos de forma complexa. Por ser um factor relevante na prática, discutiu-se o efeito da quantidade de casco usado na elaboração dos vidros sobre a conformação de produtos de forma complexa. A quantidade de casco influencia a volatilização de fundentes que por sua vez tem efeito sobre as propriedades de trabalhabilidade do vidro. Desenvolveram-se novos vidros compatíveis com a utilização de queimos enriquecidos em oxigénio que são utilizados para reduzirem os defeitos mecânicos e de superfície nos produtos de vidros de mesa prensados. A compatibilidade vidro/tecnologia fez-se com uma modificação do sistema de afinação do vidro. Os vidros modificados apresentam propriedades físicoquímicas semelhantes à do vidro inicial e por isso indicam viabilidade comercial. A tecnologia dos canais corantes foi utilizada para modificar a trabalhabilidade de um vidro base a partir da introdução até 5 % de fritas incolores ricas em Li2O. Os valores de RMS (velocidade relativa de máquina) desceram de 106,8 % para 95,7 % enquanto os valores de Pt (patamar de trabalho) subiram de 100,6 s para 111,3 s com o aumento de frita. As propriedades físico-químicas dos vidros aditivados com frita indicam viabilidade comercial. Esta inovação tecnológica introduz flexibilidade nos processos industriais vidreiros. A composição química do vidro e por isso as propriedades relacionadas com a trabalhabilidade podem ser entendidas como mais uma variável dos processos de conformação e usadas em função das técnicas de conformação disponíveis, da forma dos objectos a conformar e da engenharia da ferramenta moldante utilizada. Foi observada convergência entre os resultados experimentais e os valores calculados a partir dos modelos de Huff e Fluegel nos principais parâmetros da tecnologia vidreira (RMS e Pt) e nas propriedades dos vidros nomeadamente densidade e coeficiente de dilatação térmico. Uma parte importante deste trabalho decorreu em ambiente industrial. Em temas relacionados com a investigação do processamento vidreiro industrial, a prática de desenvolver trabalho experimental integrado no próprio ambiente industrial está claramente documentada na bibliografia publicada em revistas e jornais de referência internacional. ABSTRACT: The research on the causes of major defects that occur in glass tableware products produced by automatic processes and the development of new glasses and technologies for increasing the production efficiency, or the flexibility of operation were the objectives of the Thesis project. Viscosity influences the flexibility of glass forming. Lower drop temperatures, high product wall thicknesses, or low areas of heat transfer facilitate the occurrence of defects, mainly mechanical and surface born. We identified the products of glass tableware showing the greatest difficulties in forming, designated as complex shape products. The effect of the amount of recycled glass used in the preparation of glass batches on the conformation of products of complex shapes and on glass workability is discussed. The amount of recycled glass affects the volatilization of glass modifiers which in turn have an effect on the glass properties and workability. New glasses which become compatible with the use of oxygen burners were formulated, tested and developed to the industrial use, oxygen enrichment being used to reduce the mechanical and surface defects in pressed glass tableware. Compatibility glass / technology was achieved with a modified system of tuning of the glass. The modified glasses have physical and chemical properties similar to the original glass and therefore are commercially viable. The technology of the colouring channels was used to change glass workability of a glass base by the introduction of up to 5 % Li2O rich in colourless frit. The values of RMS (relative machine speed) fell from 106.8 % to 95.7 % while the values of Pt (cooling time) increased from 100.6 s to 111.3 s by the introduction of glass frits. The physico-chemical properties of the modified glass show commercial viability. This technology introduces flexibility in industrial processes of glass. The chemical composition of glass and therefore the properties related to workability can be understood as another variable of the glass forming processes and used according to the available forming techniques, the shape of objects and the engineering tools used for the moulds. Convergence was observed between experimental and predicted from Huff and Fluegel models in studying the properties of glasses. An important part of this work was done inside the industrial environment. On issues related to the investigation of the glass processing inside the industry, the practice of developing experimental work integrated in the industrial environment is clearly documented and referenced in the published literature in international journals and periodicals.

A ilustração enquanto processo e pensamento: autoria e interpretação

A ilustração como expressão, cumprindo o desígnio de comunicar visualmente, é reveladora de um modo específico de processo e pensamento. E pelo facto desse modo se constituir a partir do sentido implícito (do que não é dito), exigindo para se manifestar a participação cognitiva e afectiva do ilustrador, revela marcas de subjectividade e de poética portadoras de soluções narrativas, gráficas e plásticas originais. Essa transmutação entre as linguagens verbal e visual está impregnada de experiências, memórias e conhecimento; de tudo aquilo, enfim, que pelo corpo é percebido e sentido. Por isso se entende que configura, necessariamente, algo novo, já que não existem dois seres organicamente iguais. Tem-se como objectivo desta tese, reflectir sobre a ilustração ficcional enquanto construção de um autor na interpretação do texto de um outro, querendo, deste modo, contribuir para a afirmação do que é hoje a ilustração. Pretende-se, neste percurso, compreender os desígnios que cumpre a ilustração na actualidade e explicar o seu protagonismo no contexto presente do design de comunicação; quer-se ainda evidenciar que a prática da ilustração contamina ou influencia a prática do projecto de design; e que, por seu lado, a prática do projecto de design confere um entendimento distinto à prática da ilustração. As ilustrações que serão aqui objecto de estudo, são aquelas que manifestam um processo em cuja génese está a interpretação e o sentido que o seu autor atribui ao programa, e que se identificam, por isso, como próximas do projecto de design. O trabalho prático desenvolve-se pela selecção de autores que correspondem a esses pressupostos, pela sua entrevista e pela apresentação de projectos da sua autoria que justificam e reforçam a perspectiva teórica. Do confronto entre as respostas e os artefactos produzidos, conclui-se que a ilustração é, na singularidade do seu pensamento e enquanto recurso expressivo, configuradora de inovação semântica para o projecto de design de comunicação.

Avaliação das aprendizagens no ensino superior: estudo de um sistema de avaliação nas unidades curriculares de projeto de simulação empresarial

Com a preocupação de suprir lacunas evidenciadas pelo ensino tradicional típico do Curso de Contabilidade e Administração do Instituto Superior de Contabilidade e Administração do Porto, introduziu-se no seu sistema de ensino as unidades curriculares de Projeto de Simulação Empresarial I e II (PSE I e PSE II), que, pela sua singularidade e especificidades, denominamos de Ambiente Empresarial. A particularidade deste processo de formação, centrado no desenvolvimento de competências, molda a metodologia do ensino, da aprendizagem e da avaliação. De destacar que o sistema de avaliação das aprendizagens introduzido está construído numa base informática de recolha contínua e ponderação sistemática de uma série de indicadores. A presente tese tem como objetivo estudar as potencialidades e constrangimentos do sistema de avaliação utilizado nas unidades curriculares referidas. Pretendemos, em particular, analisar em que medida este sistema beneficia o sucesso escolar dos estudantes, em resultado de uma melhoria no processo de aprendizagem e, consequentemente, no desenvolvimento das competências dos estudantes. No decorrer dos anos letivos de 2008-2009 e de 2009-2010, segundo e primeiro semestres, respetivamente, recolhemos dados qualitativos e quantitativos através de questionários aos estudantes e entrevistas aos docentes e ao responsável pela coordenação das unidades curriculares. Os resultados do estudo levantaram uma série de questões relacionadas com a avaliação e a forma como esta desenvolve nos estudantes uma diferente postura no que concerne ao processo de ensino e aprendizagem. A centralidade no estudante como foco deste sistema de avaliação possibilita a autorregulação da aprendizagem através da retroação. O trabalho individual e de grupo apresentam-se como principais fatores no desenvolvimento das competências genéricas (relacionais) e comportamentais.

201186

How is it possible that civilization has a global understanding of the abstraction of the human form? At a subconscious level as humans we have the ability to find the form of the body in the most minimal of shapes, objects, landscape and even natural phenomena such as clouds, it is an ability inherent in human nature. This deep-rooted facility to recognise the human form at various levels of abstraction is also developed further by our life experiences, environment and total education; specifically in the fine and applied arts. For this research I have focused on the change between realistic representations of the human form to complete abstraction. I have broken it down to its most basic elements to explore at what point our visual language allows us to recognise and define a shape or object as being influenced by, or connected to, the human form. I have concentrated on extending my own visual language relating to the human form within my own practice. A series of practical research projects has been undertaken and has been supported by a new series of investigative works, drawings and written evidence of the ways in which the figure can be represented, documenting the process via the thesis and final works. As part of my research, I have investigated the way artists working with clay have abstracted the human form focusing in particular on work from the 1950s to the present day using clay, drawing and installation. I have looked at how, over this period, artists have developed their own visual signifiers of the human form within their abstract/representational creations. The aim of this research will be falls into two parts: • To investigate how far one can push the human form in clay before it moves into abstraction • To locate the vanishing point where viewers still identify the human within ceramic abstract sculpture

Time in Perspective: a visual approach to models of time

Geographical representations of topographical space come in many shapes and are a regular topic of discussion. The depiction of the invisible and maybe even illusory concept of time on the other hand, remains largely unchanged and undisputed. A uniform and arithmetic model of time fits well with the rigid structure of digital data, which might be why it has been widely adopted within HCI. In our proposal, we will present historic and contemporary approaches that offer alternative perspectives on the visual representation of time. Keywords: timeline, chronographics

The estimation and improvement of the selectivity in crustacean and fish trawls

Tese de dout., Ciências e Tecnologias das Pescas, Faculdade de Ciências do Mar e do Ambiente, Univ. do Algarve, 2003