Theory and optimisation of 1.3 and 1.55 μm (Al)InGaAs metamorphic quantum well lasers

The use of InGaAs metamorphic buffer layers (MBLs) to facilitate the growth of lattice-mismatched heterostructures constitutes an attractive approach to developing long-wavelength semiconductor lasers on GaAs substrates, since they offer the improved carrier and optical confinement associated with GaAs-based materials. We present a theoretical study of GaAs-based 1.3 and 1.55 μm (Al)InGaAs quantum well (QW) lasers grown on InGaAs MBLs. We demonstrate that optimised 1.3 μm metamorphic devices offer low threshold current densities and high differential gain, which compare favourably with InP-based devices. Overall, our analysis highlights and quantifies the potential of metamorphic QWs for the development of GaAs-based long-wavelength semiconductor lasers, and also provides guidelines for the design of optimised devices.

On the Bleeding Edge : Debloating Internet Access Networks

As ever more devices are connected to the internet, and applications turn ever more interactive, it becomes more important that the network can be counted on to respond reliably and without unnecessary delay. However, this is far from always the case today, as there can be many potential sources of unnecessary delay. In this thesis we focus on one of them: Excess queueing delay in network routers along the path, also known as bufferbloat. We focus on the home network, and treat the issue in three stages. We examine latency variation and queueing delay on the public internet and show that significant excess delay is often present. Then, we evaluate several modern AQM algorithms and packet schedulers in a residential setting, and show that modern AQMs can almost entirely eliminate bufferbloat and extra queueing latency for wired connections, but that they are not as effective for WiFi links. Finally, we go on to design and implement a solution for bufferbloat at the WiFi link, and also design a workable scheduler-based solution for realising airtime fairness in WiFi. Also included in this thesis is a description of Flent, a measurement tool used to perform most of the experiments in the other papers, and also used widely in the bufferbloat community.

Determinants of the Design and Use of PMS in Portuguese Government Agencies: A Complementary Theoretical Approach

Performance measurement is seen as a main pillar of public management reforms. However, prior research did not mitigate the level of ambiguity on PMS development and use and many questions left unanswered. Our findings provide knowledge on the design and use of PMS in the public sector answer- ing to calls for a complementary approach among institutional and contingency factors. The authors find that the design of PMS and the use of performance information for external purposes are increased to legitimate the organizational’ work and to obtain external support. Moreover, structural variables such as type of agency and management autonomy are also determinants on the organizational responses. Finally, the authors find some coupling between the design of PMS and outcomes. So, both contingent and institutional approaches play an important role on the empirical model.

Evaluación por colegas pares

En este número de reflexiones pedagógicas presentamos el modelo que se ha diseñado para implementar la evaluación por colegas pares en la Universidad del Rosario. Explicamos los principios que lo guían y las etapas y procedimientos para realizar esta evaluación; además, exponemos algunos aprendizajes que ha dejado su implementación en dos facultades en los últimos años, y presentamos algunos retos y desarrollos que enfrenta el modelo a futuro.

Congruencia entre los valores personales y organizacionales y su influencia con el engagement en el trabajo : estudio de caso en una organización del sector salud

La capacidad de gestión del personal se ha convertido en un imperativo para las organizaciones modernas. Por tanto se vienen introduciendo temas como la administración en valores y el engagement de los trabajadores. Sin embargo, la relación entre estos dos aún no ha sido estudiada. El presente estudio tiene como objetivo analizar el efecto que tiene el grado de articulación y reconocimiento de los valores organizacionales y personales y organizacionales sobre los niveles de engagement de los empleados. Para esta investigación se utilizó una muestra constituida por 54 trabajadores de una organización del sector salud de la ciudad de Bogotá a quienes les fueron aplicadas dos escalas: el Inventario para Medir la Articulación entre la Persona y la Organización (Inventario APO) y Utrech Work Engagement Scale (UWES). Como principal resultado se obtuvo que de las tres dimensiones consideradas predictoras del engagement, solamente el reconocimiento de los valores organizacionales tuvo un efecto estadísticamente significativo.

Instrumentos de apoio à gestão estratégica e ao desempenho organizacional dos fisioterapeutas em unidades privadas de fisioterapia

O sucesso de uma gestão baseada na estratégia reside, no aproveitamento racional e eficiente dos seus recursos humanos, financeiros e organizacionais, bem como na sua capacidade para concretizar objectivos e alcançar resultados. Esta dissertação foi elaborada baseando-se no pressuposto que, a selecção e a aplicação de um Instrumento de Apoio à Gestão em unidades privadas de fisioterapia (UPF’s) permitirão induzir níveis acrescidos de melhoria do desempenho individual e/ou organizacional. Constituiu objectivo geral da mesma contribuir para a sensibilização e a difusão alargada das ferramentas de apoio à gestão que, aplicadas naquelas unidades, poderiam induzir níveis acrescidos de melhoria do desempenho. Definiram-se ainda três objectivos específicos consubstanciando preocupações relacionadas com a reprodução do conhecimento especializado em gestão, com a sua aplicação específica no terreno e com a subjacente criação de valor individual e organizacional. A metodologia utilizada foi a abordagem de Estudo de Caso, inspirada na técnica focus-group, aplicada a três UPF’s, e os resultados obtidos através das análises efectuadas permitiram identificar a ausência da aplicação de instrumentos de apoio à gestão e de avaliação de desempenho, bem como níveis elevados de desempenho, satisfação e autonomia nos profissionais de fisioterapia, constituindo estes a base para justificar a necessidade urgente da elaboração de um plano de implementação de um sistema de avaliação de desempenho nas unidades estudadas. /ABSTRACT: The success of a management based on strategy relies in the rational and efficient use of its human, financial and organizational resources, as well as its ability to achieve objectives and results. This thesis was developed, based on the assumption that the selection and application of a management support instrument in private physiotherapy units would induce higher levels of individual performance and / or organization. It was general objective the contribution to the sensibilization and diffusion of tools to support management, which applied in those units, could induce higher levels of performance. There were defined three specific objectives which concerned whereabouts with the reproduction of specialized knowledge in management, with its specified applicability in the work field and with the underneath creation of individual and organizational value. The applied methodology was a case study, inspired by the focus-group technique applied in three private physiotherapy units, and the results obtained through the analysis allowed the identification of lack of use of any support management tools and performance evaluation, as well as high standard levels of performance, satisfaction and professional autonomy in physical therapists, being this the base for justifying the urgent need for developing an implementation plan of a performance evaluation system applied to these units.

O sistema integrado de gestão de recursos humanos de uma empresa de tecnologias de informação

O presente trabalho final de mestrado pretende realizar uma análise crítica acerca do estágio curricular desenvolvido no Departamento de Recursos Humanos de uma empresa ligada ao setor das Tecnologias de Informação. Este relatório procura, através da identificação e descrição de métodos e estratégias implementadas pela empresa, que têm como finalidade potencializar o capital humano da organização, estabelecer uma relação entre os diferentes processos de Gestão de Recursos Humanos, interligando-os. Funcionando como um sistema integrado, pretende-se descrever as atividades realizadas no processo de recrutamento e seleção, de acolhimento e integração, de gestão administrativa/contratual, de gestão de desempenho e de formação e desenvolvimento profissional. Em suma, importa salientar que apesar de os processos de Gestão de Recursos Humanos da companhia terem procedimentos devidamente identificados, existe necessidade de promover práticas de melhorias no que concerne ao controlo interno dos mesmos; Abstract: The Integrated Human Resource Management of an Information Technology company This final work of master aims to realize a critical analysis about the internship developed in the Human Resources Department of Information Technology company. This report seeks, through the identification and description of methods and strategies implemented by the company, which are intended to enhance the human capital of the organization, establish a relationship between the different Human Resource Management processes, connecting them. Functioning as an integrated system, is intended to describe the activities in the process of recruitment and selection, reception and integration, administrative/contract management, performance management and training and professional development. In short, it should be noted that although Human Resource Management processes of the company have properly identified procedures, there is need to promote improved practices with regard to internal monitoring.

Composição botânica e qualidade do pasto selecionado por ovelhas em caatinga raleada e enriquecida.

Resumo: O presente estudo foi conduzido com o objetivo de determinar a composição botânica e a qualidade da dieta selecionada por ovelhas, através da técnica de micro-histologia fecal, em caatinga raleada e enriquecida com capim massai (Panicum maximum cv. Massai), recebendo diferentes quantidades de concentrado (0; 200; 350 e 500 g de concentrado por dia), e em diferentes períodos do ano (águas, transição água-seca e seca). Foram estimados também o consumo e digestibilidade dos nutrientes, bem como a degradabilidade de espécies forrageiras ingeridas pelas ovelhas. Os experimentos foram realizados na Fazenda Crioula do Meio, pertencente a Embrapa Caprinos e Ovinos em Sobral, CE no período de março a novembro de 2013. No Experimento 1, para a determinação da composição botânica e qualidade da dieta selecionada, foram utilizadas dezesseis ovelhas Somalis brasileira, gestantes, multíparas e peso médio de 30,58+2,48 kg. O acompanhamento da ingestão do pasto pelas ovelhas foi feito em três períodos (águas, transição água-seca e seca), referentes aos meses de abril, junho e agosto de 2013, respectivamente. Amostras das plantas foram coletadas para o preparo das lâminas de referência, e posterior identificação e caracterização dos descritores epidérmicos. O mesmo foi feito para as fezes coletadas nas ovelhas. Com base na proporção de cada espécie identificada nas lâminas fecais que compuseram a dieta, e na composição química das forrageiras identificadas, foi possível determinar a qualidade da dieta ingerida. De 76 espécies observadas no pasto, 33 foram identificadas na dieta das ovelhas, destacando as espécies sabiá (Mimosa caesalpiniaefolia), centrosema (Centrosema sp.), ervanço (Alternanthera brasiliana), massai (Panicum maximum cv Massai) e paco-paco (Wissadula rostrata) como as mais selecionadas pelos animais ao longo dos períodos, chegando a compor mais de 50% da dieta selecionada. Com a chegada do período seco, espécies indesejáveis como o marmeleiro (Croton sonderianus) e o mofumbo (Combretum lepreosum), também fizeram parte das plantas selecionadas. Quanto ao valor nutritivo da dieta selecionada, os animais selecionaram uma dieta com valor nutritivo superior ao amostrado no pasto. No Experimento 2, na mesma condição do experimento anterior, trinta e duas ovelhas Somalis brasileira foram utilizadas para determinação do consumo e digestibilidade dos nutrientes, realizado em três ensaios (abril - terço final de gestação; junho - lactação e agosto - desmame). Para predição do consumo, o indicador LIPE® foi utilizado. Pesagens quinzenais foram realizadas para avaliação do desempenho das ovelhas e dos cordeiros nascidos. O concentrado oferecido favoreceu a maior ingestão e digestibilidade da MS e PB, com efeito substitutivo em relação ao consumo de pasto (P<0,05). Para o período seco, menores consumos foram observados em relação aos períodos das águas e de transição água-seca (P<0,05). Maiores consumos e digestibilidades dos constituintes fibrosos foram observados para as ovelhas não suplementados (P<0,05). Na avaliação do desempenho, a suplementação oferecida determinou os maiores pesos verificados durante a lactação, ao desmame e para os pesos ao nascer e ao desmame dos cordeiros (P<0,05). No Experimento 3, dois ovinos Morada Nova foram utilizados para determinação da degradabilidade da matéria seca (MS), proteína bruta (PB) e fibra em detergente neutro (FDN) de cinco das forrageiras selecionadas pelas ovelhas no Experimento 1: M. caesalpiniaefolia, A. brasiliana, P. maximum cv. Massai, jurema-preta (Mimosa tenuiflora), C. leprosum, nos tempos 0, 6, 24, 48, 72 e 96 horas de incubação. Para cada forrageira, foram determinadas equações para o desaparecimento da MS, PB e FDN. Também foi feito o fracionamento da proteína em suas porções degradáveis e não degradáveis no rúmen. Foi observado maior desaparecimento da MS, PB e FDN, além dos melhores níveis de proteína efetivamente degradada no rúmen para A. brasiliana, seguido pelo P. maximum cv. Massai e M. caesalpiniaefolia. Com as informações obtidas, conclui-se que a micro-histologia fecal apresenta-se como uma técnica viável para avaliações da composição botânica da dieta selecionada por ovinos na caatinga. Ovelhas na caatinga possuem uma grande habilidade de selecionar a dieta, modificando-a ao longo das fases fenológicas, sempre na tentativa de estabelecer uma dieta com melhor valor nutritivo. Forrageiras como A. brasiliana, M. caesalpiniaefolia e o P. maximum cv. Massai, podem ser consideradas um interessante recurso alimentar, em virtude de seu valor nutricional e aproveitamento por ovelhas criadas na caatinga. Abstract: This study was conducted in order to determine the botanical composition and diet quality selected by sheep through fecal micro-histological technique, in thinned and enriched caatinga with Massai grass (Panicum maximum cv Massai.), receiving different amounts of concentrate (0; 200; 350 and 500 g of concentrate per day) at different periods (wet, transition wet-dry and dry). Were also estimated the intake, digestibility, as well as the degradability of forage species eaten by sheep. The experiments were performed in the "Fazenda Crioula do Meio", owned by Embrapa Goats and Sheep, in Sobral, Ceará State, Brazil, from march to november 2013. In Trial 1, sixteen female, pregnant, multiparous, with average body weight of 30,58+2,48 kg Somalis brasileira breed sheep were used to determine the botanical composition and the quality of the selected diet. The monitoring of pasture intake of sheep were conducted in three phenological periods of the caatinga's pasture (wet season, transition wet-dry and dry season). Plant samples were collected for the preparation of the reference slides, with subsequent identification and characterization of epidermal descriptors. The same was done for the feces collected in sheep. Considering the proportion of each species identified in fecal slides which composed the diet, and the chemical composition of forage identified, it was possible to determine the quality of the selected diet. From 76 species observed in the pasture, 33 species was identified in the sheep selected diet, emphasizing the Sabiá (Mimosa caesalpiniaefolia), centrosema (Centrosema sp.), ervanço (Alternanthera brasiliana), massai (Panicum maximum cv Massai) e paco-paco (Wissadula rostrata) as the most selected species by sheep during the study, composing more than 50% of the selected diet. In the Dry Season, undesirable species like marmeleiro (Croton sonderianus) and mofumbo (Combretum leprosum), were also constituent of the diet. Regarding to the nutritional value of selected diet, the sheep selected a diet with more protein than the sampled in the pasture. In the final late gestation, the sheep without supplementation ate a diet above 16% of CP, higher than the selected diet by treatments 350 and 500 g of concentrate per day (P<0.05). Were also observed to the non supplemented sheep, less fiber content intake (P<0.05). In the Trial 2, in the same condition of the first Trial, thirty two Somalis brasileira female sheep were used to determine the intake and digestibility, conducted in three assays (April - third late pregnancy; June - lactation and August - weaning). To predict the intake, the marker LIPE was used. Sheep and lambs were weighted every two weeks to performance evaluation. The concentrate offered to sheep favored to higher intake and digestibility of DM and CP than non supplemented sheep, with inverse relationship to the pasture intake (P<0.05). For the Dry Season, lower intake were observed than for Wet Season and Transition Wet-Dry (P<0.05). Higher intakes and digestibility of the fiber constituents were verified to non supplemented sheep (P<0.05). To performance evaluation, the offered supplementation determined the higher weights observed during lactation and weaning of sheep, and to birth and weaning weights of lambs (P<0.05). In Trial 3, two male sheep were used to determine the degradability of dry matter (DM), crude protein (CP) and neutral detergent fiber (NDF) of five forages selected by sheep in Trial 1: M. caesalpiniaefolia, A. brasiliana, P. maximum cv. Massai, jurema-preta (Mimosa tenuiflora) and C. lepreosum, at zero, 6, 24, 48, 72 and 96 hours of incubation. For each forage, were determined equations for the disappearance of DM, CP and NDF. It was also realized the protein fractions in their degradable and non-degradable in the rumen parts. Was detected a higher disappearance of DM, CP and NDF, as also better proportion of the rumen degradable protein to A. brasiliana, followed by P. maximum cv. Massai and M. caesalpiniaefolia. With the information obtained, it is concluded that the fecal micro histological technique presents as a viable technique to evaluate the selected diet by sheep in caatinga's pasture. On this pasture, the sheep are skilled to select the diet, changing during the phenological phases, trying to form a diet of better nutritive value. Forages as A. brasiliana, P. maximum cv. Massai and M. caesalpiniaefolia, can be considered an interesting food source to ewes kept in the caatinga.

Advanced voxel-based CAD modelling for FSI simulations for automotive structures design

Additive Manufacturing (AM) is nowadays considered an important alternative to traditional manufacturing processes. AM technology shows several advantages in literature as design flexibility, and its use increases in automotive, aerospace and biomedical applications. As a systematic literature review suggests, AM is sometimes coupled with voxelization, mainly for representation and simulation purposes. Voxelization can be defined as a volumetric representation technique based on the model’s discretization with hexahedral elements, as occurs with pixels in the 2D image. Voxels are used to simplify geometric representation, store intricated details of the interior and speed-up geometric and algebraic manipulation. Compared to boundary representation used in common CAD software, voxel’s inherent advantages are magnified in specific applications such as lattice or topologically structures for visualization or simulation purposes. Those structures can only be manufactured with AM employment due to their complex topology. After an accurate review of the existent literature, this project aims to exploit the potential of the voxelization algorithm to develop optimized Design for Additive Manufacturing (DfAM) tools. The final aim is to manipulate and support mechanical simulations of lightweight and optimized structures that should be ready to be manufactured with AM with particular attention to automotive applications. A voxel-based methodology is developed for efficient structural simulation of lattice structures. Moreover, thanks to an optimized smoothing algorithm specific for voxel-based geometries, a topological optimized and voxelized structure can be transformed into a surface triangulated mesh file ready for the AM process. Moreover, a modified panel code is developed for simple CFD simulations using the voxels as a discretization unit to understand the fluid-dynamics performances of industrial components for preliminary aerodynamic performance evaluation. The developed design tools and methodologies perfectly fit the automotive industry’s needs to accelerate and increase the efficiency of the design workflow from the conceptual idea to the final product.

An approach to digitalise activities of combine harvesters through CANBUS

The increase in the efficiency of agricultural machinery is a theme that attracted the attention and investments of the industrial and research community. In addition, in a global market, where the prices of agricultural commodities are so volatile and the prices of the inputs increase, farmers and agricultural contractors struggle to obtain at the end of the agricultural season a consolidated profit. For these reasons, it is important to carefully plan the usage of combine harvesters, to reduce the unproductive time and the input usage such as the fuel, that at the end of the harvesting season could increase costs. This study aims to develop an algorithm able to automatically identify and evaluate the time spent by the combines in each of the identified activities, identify the field boundaries of the harvested fields and perform a performance evaluation. To be able to develop the algorithm, during the harvesting seasons of 2020 and 2022, two combine harvesters operating in real-world conditions in Bologna’s Province were monitored. The data necessary to perform the analysis were acquired as CANBUS data and processed by using the MATLAB ® suite. The results obtained from this analysis show that the monitored combines have spent over 60% of the time performing harvesting activities, 13% of the time idling at the field, 10% performing headland turn, the 3% and 4% of the time respectively in transport on the field and road and 2% of the time in unloading. In addition, the performance of the monitored combines resulted similarly to the performance reported in other studies.

Compliance verification of virtual Phasor Measuring Unit using Ip-DFT algorithm according to the IEEE-60255-118-1(2018).

With the increase in load demand for various sectors, protection and safety of the network are key factors that have to be taken into consideration over the electric grid and distribution network. A phasor Measuring unit is an Intelligent electronics device that collects the data in the form of a real-time synchrophasor with a precise time tag using GPS (Global positioning system) and transfers the data to the grid command to monitor and assess the data. The measurements made by PMU have to be very precise to protect the relays and measuring equipment according to the IEEE 60255-118-1(2018). As a device PMU is very expensive to research and develop new functionalities there is a need to find an alternative to working with. Hence many open source virtual libraries are available to replicate the exact function of PMU in the virtual environment(Software) to continue the research on multiple objectives, providing the very least error results when verified. In this thesis, I executed performance and compliance verification of the virtual PMU which was developed using the I-DFT (Interpolated Discrete Fourier transforms) C-class algorithm in MATLAB. In this thesis, a test environment has been developed in MATLAB and tested the virtually developed PMU on both steady state and dynamic state for verifying the latest standard compliance(IEEE-60255-118-1).

Evaluation of the performance of steel fibre reinforced self-compacting concrete in elevated slab systems; from the material to the structure

Degree of Doctor of Philosophy of Structural/Civil Engineering

Evaluation of a multiobjective performance index for distribution systems with distributed generation

Here a multiobjective performance index for distribution systems with distributed generation based on a steady-state analysis of the network is proposed. This index quantifies the distributed generation impact on total losses, voltage profile and short circuit currents, and will be used as objective function in an evolutionary algorithm aimed at searching the best points for connecting distributed generators. Moreover, a loss allocation technique, based on the Zbus method, is applied on the original configuration of the network to obtain a good quality initial population. An IEEE medium voltage distribution network is analysed and results are presented and discussed.

Evaluation of the performance of child restraint systems. Final report.

National Highway Traffic Safety Administration, Washington, D.C.