Development of a toolbox for the reduction of hordeins in barley malt beers

Gluten sensitive consumers and people suffering from coeliac disease account for up to 6% of the general population (Catassi et al., 2013). These consumers must avoid foods which contain gluten and related proteins found in wheat, rye or barley. Beer is produced from barley malt and therefore contains hordeins, (gluten like proteins). Beers labelled as gluten-free must contain below 10 mg/kg hordeins (10 mg/kg hordeins = 20 mg/kg gluten under current regulations) to be considered safe for gluten sensitive consumers. Currently there are a limited number of methods available for reducing beer hordeins, the studies outlined in this thesis provide a range of tools for the beverage industry to reduce the hordein content of beer It is well known, that during malting and brewing hordeins are reduced, but they still remain in beer at levels above 10 mg/kg. During malting, hordeins are broken down to form new proteins in the growing plant. Model malting and brewing systems were developed and used to test, how the modification of the malting process could be used to reduce beer hordeins. It was shown, that by using a controlled malting and brewing regime, a range of barley cultivars produced beer with significant differences in levels of hordeins. Beer hordeins ranged from 10 mg/kg to 60 mg/kg. Another study revealed that when malting was prolonged, to maximise breakdown of proteins, beer hordeins can be reduced by up to 44%. The natural breakdown of hordein during malting enhanced in a further study, when a protease was added to support the hordein degradation during steeping and germination. The enzyme addition resulted in a 46% reduction in beer hordeins 2 when compared to the control. All of the malt treatments had little or no impact on malt quality. The hordein levels can also be reduced during the beer stabilisation process. Levels of beer hordein were tested after stabilisation using two different concentrations of silica gel and tannic acid. Silica gel was very effective in reducing beer hordeins, 90% of beer hordeins were removed compared to the control beer. Beer hordeins could be reduced to below 10 mg/kg and the beer qualities such as foam, colour and flavour were not affected. Tannic acid also reduced beer hordein by up to 90%, but it reduced foam stability and affected beer flavours. A further study described treatment of beer with microbial transglutaminase (mTG), to create bonds between hordein proteins, which increased particle size and allowed removal during filtration. The addition of the mTG led to a reduction of the beer hordein by up to 96% in beer, and the impact on the resulting beer quality was minimal. These studies provide the industry with a toolbox of methods leading to the reduction of hordein in the final beer without negatively affecting beer quality.

Encapsulation of ascorbic acid promotes the reduction of Maillard reaction products in UHT milk

The presence of amino groups and carbonyls renders fortified milk with ascorbic acid particularly susceptible to the reduction of available lysine and to the formation of Maillard reaction products (MRPs), as Nε-(Carboxyethyl)-L-lysine (CEL), Nε-(Carboxymethyl)-L-lysine (CML), Amadori products (APs) and off-flavors. A novel approach was proposed to control the Maillard reaction (MR) in fortified milk: ascorbic acid was encapsulated in a lipid coating and the effects were tested after a lab scale UHT treatment. Encapsulation promoted a delayed release of ascorbic acid and a reduction in the formation of MRPs. Total lysine increased up to 45% in milk with encapsulated ascorbic acid, while reductions in CML, CEL and furosine ranged from 10% to 53% compared with control samples. The effects were also investigated towards the formation of amide-AGEs (advanced glycation end products) by high resolution mass spectrometry (HRMS) revealing that several mechanisms coincide with the MR in the presence of ascorbic acid (AA).

Implications of the reduction of cutting fluid in drilling AISI P20 steel with carbide tools

The machining of hardened steel is becoming increasingly important in manufacturing processes. Machined parts made with hardened steel are often subjected to high service demands, which require great resistance and quality. The machining of this material submits the tools to high mechanical and thermal loads, which increases the tool wear and affects the surface integrity of the part. In that context, this work presents a study of drilling of AISI P20 steel with carbide tools, analyzing the effects on the process caused by the reduction of cutting fluid supply and its relation with the tool wear and the surface integrity of the piece. The major problem observed in the tests was a difficulty for chips to flow through the drill flute, compromising their expulsion from the hole. After a careful analysis, a different machining strategy was adopted to solve the problem

Reduction of the “ngege”, Oreochromis esculentus (Teleostei: Cichlidae) populations, and resultant population genetic status in the Lake Victoria region

Ngege, Oreochromis esculentus, originally formed the mainstay of the Lake Victoria Region (LVR) fisheries. Together with its indigenous congener O. variabilis, it was displaced from Lakes Victoria and Kyoga of LVR and was found to survive as isolated small populations within the peripheral minor lakes and reservoirs around the two lakes. Displacement of the two LVR indigenous tilapiines was thought to be principally driven by changed lake environment and predation by the introduced Nile perch, but also competition and genetic swamping by the closely related introduced and comparatively more ecologically versatile tilapine species. In a study carried out in the LVR between 1993 and 2003, micro satellites and RAPD markers were used to analyse the remnant populations so as to establish the population structure and extant genetic diversity of O. esculentus. Analyses indicated that the surviving O. esculentus retained a high proportion of genetic diversity with high differentiation between units an indication of genetic exchange between indigenous and introduced Nile tilapia where the two forms co-existed. While this heightened concern for genetic swamping of the remnant population units by the introduced tilapiines it was noteworthy that in a few of the satellite lakes where the O. esculentus was dominant evidence for introgression was weak.

Multi-Scale Dynamic Study of Secondary Impact During Drop Testing of Surface Mount Packages

This dissertation focuses on design challenges caused by secondary impacts to printed wiring assemblies (PWAs) within hand-held electronics due to accidental drop or impact loading. The continuing increase of functionality, miniaturization and affordability has resulted in a decrease in the size and weight of handheld electronic products. As a result, PWAs have become thinner and the clearances between surrounding structures have decreased. The resulting increase in flexibility of the PWAs in combination with the reduced clearances requires new design rules to minimize and survive possible internal collisions impacts between PWAs and surrounding structures. Such collisions are being termed ‘secondary impact’ in this study. The effect of secondary impact on board-level drop reliability of printed wiring boards (PWBs) assembled with MEMS microphone components, is investigated using a combination of testing, response and stress analysis, and damage modeling. The response analysis is conducted using a combination of numerical finite element modeling and simplified analytic models for additional parametric sensitivity studies.

Biological activities (antibacterial, antifungal and cytotoxic) of secondary metabolites of Ircinia spp.

Sponges are the most primitive of the multicellular, These organisms don’t have any mechanical defense system, so their early appearance in evolution has given them a lot of time for the development of advanced secondary metabolites as chemical defense system. Sponges have the potential to provide drugs from chemical components against diseases. In this investigation the sponge samples, which it is Ircina spp., were collected at depth of 15- 24 meter, from locations on the coastline of Island Kish in Persian Gulf of Iran. For identifying natural components, methanolic and diethyletter were used as extraction solvents, after removal of the solvents, the GC/MS spectra of the fraction were obtained. Then in vitro cytotoxic, antimicrobial and antifungal were identified. In vitro cytotoxity screening, by XTT assay, against KB/ C359 and HUT-56/ C365 cell line, was conducted in this study in 1 - 544 μg/ml. IC54 for winter diethyletter extract was 325 μg/ml, winter methanolic extract was 364 μg/ml, IC54 for summer diethyletter extract was 544 μg/ml, and summer methanolic extract was 454 μg/ml in HUT-56. IC54 for winter diethyletter extract was 454 μg/ml, winter methanolic extract was 444 μg/ml, IC54 for summer diethyletter extract was 344 μg/ml, and summer methanolic extract was 424 μg/ml in KB. In vitro antimicrobial activity by Broth Dilution Methods against clinical gram-positives and gram negatives (Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus and Bacillus subtilis). The results conducted that the MIC values of winter diethyletter extract for Escherichia coli 24mg/ml, the MIC values of winter diethyletter extract for Escherichia coli 24mg/ml, the MIC and MBC values of winter diethyletter extract for Staphylococcus aureus was 2mg/ml and 24mg/ml. The MIC and MBC values of winter diethyletter extract for Bacillus subtilis was 1.5 mg/ml and 2mg/ml. In vitro antifungal activity by Broth Dilution Methods against clinical pathogens; Candida albicans and Aspergillus fumigatus. The results conducted that the aqueous extracts didn’t have any antifungal activities on pathogens, the MFC of the summer and winter diethyletter extract was 30 mg/ml and 2 mg/ml A. fumigates, the summer and winter methanolic extract was 0722 mg/ml and 2 mg/ml A. fumigates, the summer and winter methanolic was 4/75mg/ml, MFC 5 mg/ml on C. albicans.

Ray-theoretical modeling of secondary microseism P-waves

Secondary microseism sources are pressure fluctuations close to the ocean surface. They generate acoustic P-waves that propagate in water down to the ocean bottom where they are partly reflected, and partly transmitted into the crust to continue their propagation through the Earth. We present the theory for computing the displacement power spectral density of secondary microseism P-waves recorded by receivers in the far field. In the frequency domain, the P-wave displacement can be modeled as the product of (1) the pressure source, (2) the source site effect that accounts for the constructive interference of multiply reflected P-waves in the ocean, (3) the propagation from the ocean bottom to the stations, (4) the receiver site effect. Secondary microseism P-waves have weak amplitudes, but they can be investigated by beamforming analysis. We validate our approach by analyzing the seismic signals generated by Typhoon Ioke (2006) and recorded by the Southern California Seismic Network. Back projecting the beam onto the ocean surface enables to follow the source motion. The observed beam centroid is in the vicinity of the pressure source derived from the ocean wave model WAVEWATCH IIIR. The pressure source is then used for modeling the beam and a good agreement is obtained between measured and modeled beam amplitude variation over time. This modeling approach can be used to invert P-wave noise data and retrieve the source intensity and lateral extent.

Risk Factors for Neonatal Sepsis and Method for Reduction of Blood Culture Contamination

Background False-positive blood cultures findings may lead to a falsely increased morbidity and increased hospital costs. Method The survey was conducted as retrospective - prospective study and included 239 preterm infants (born before 37 weeks of gestation) who were treated in Neonatal Intensive Care Unit (NICU) in Institute for Child and Youth Health Care of Vojvodina during one year (January 1st, 2012 to December 31st, 2012). The retrospective part of the study focused on examination of incidence of neonatal sepsis and determination of risk factors. In the prospective part of the study infants were sub-divided into two groups: Group 1- infants hospitalized in NICU during the first 6 months of the study; blood cultures were taken by the ‘’clean technique’’ and checklists for this procedure were not taken. Group 2- neonates hospitalized in NICU during last 6 months of the study; blood cultures were taken by ‘’sterile technique’’ and checklists for this procedure were taken. Results The main risk factors for sepsis were prelabor rupture of membranes, low gestational age, low birth weight, mechanical ventilation, umbilical venous catheter placement, and abdominal drainage. Staphylococcus aureus and coagulase negative Staphylococcus were the most frequently isolated microorganisms in false-positive blood samples. Conclusions Education of employees, use of checklists and sterile sets for blood sampling, permanent control of false positive blood cultures, as well as regular and routine monthly reports are crucial for successful reduction of contamination rates.

The Effects of Instrumental Touching on Infant Pain Perception and the Effects of Eutectic Mixture of Local Anesthetics (EMLA) on the Reduction of Pain

Background: Premature infants, who have to spend the first week of their lives in neonatal intensive care units (NICUs), experience pain and stress in numerous cases, and they are exposed to many invasive interventions. The studies have shown that uncontrolled pain experienced during early life has negative and long-term side effects, such as distress, and such experiences negatively affect the development of the central nervous system Objectives: The purpose of the study was to examine the effects of touching on infant pain perception and the effects of eutectic mixture of local anesthetic (EMLA) on the reduction of pain. Patients and Methods: Data for the study were collected between March and August 2012 from the neonatal clinic of a university hospital located in eastern Turkey. The population of the study consisted of premature infants who were undergoing treatment, completed the first month and who were approved for Hepatitis B vaccine. The study consisted of two experimental groups and one control group. Information forms, intervention follow-up forms, and Premature Infant Pain Profile (PIPP) were used to collect the data. EMLA cream was applied on the vastus lateralis muscles of the first experimental group before the vaccination. The second experimental group was vaccinated by imitation (placebo), without a needle tip or medicine. Vaccination was carried out using instrumental touch in this group. A routine vaccination was applied in the control group. Results: Mean pain scores of the group to which EMLA was applied were lower in a statistically significant way (P < 0.05) compared to the pain scores of the other groups. Moreover, it was determined that even though invasive intervention was not applied to the newborns, the touching caused them to feel pain just as in the placebo group (P < 0.005). Conclusions: The results demonstrated that EMLA was an effective method for reducing pain in premature newborns, and the use of instrumental touch for invasive intervention stimulated the pain perception in the newborns.

Surface structured platinum electrodes for the electrochemical reduction of carbon dioxide in imidazolium based ionic liquids

The direct CO2 electrochemical reduction on model platinum single crystal electrodes Pt(hkl) is studied in [C2mim+][NTf2−], a suitable room temperature ionic liquid (RTIL) medium due to its moderate viscosity, high CO2 solubility and conductivity. Single crystal electrodes represent the most convenient type of surface structured electrodes for studying the impact of RTIL ion adsorption on relevant electrocatalytic reactions, such as surface sensitive electrochemical CO2 reduction. We propose here based on cyclic voltammetry and in situ electrolysis measurements, for the first time, the formation of a stable adduct [C2mimH–CO2−] by a radical–radical coupling after the simultaneous reduction of CO2 and [C2mim+]. It means between the CO2 radical anion and the radical formed from the reduction of the cation [C2mim+] before forming the corresponding electrogenerated carbene. This is confirmed by the voltammetric study of a model imidazolium-2-carboxylate compound formed following the carbene pathway. The formation of that stable adduct [C2mimH–CO2−] blocks CO2 reduction after a single electron transfer and inhibits CO2 and imidazolium dimerization reactions. However, the electrochemical reduction of CO2 under those conditions provokes the electrochemical cathodic degradation of the imidazolium based RTIL. This important limitation in CO2 recycling by direct electrochemical reduction is overcome by adding a strong acid, [H+][NTf2−], into solution. Then, protons become preferentially adsorbed on the electrode surface by displacing the imidazolium cations and inhibiting their electrochemical reduction. This fact allows the surface sensitive electro-synthesis of HCOOH from CO2 reduction in [C2mim+][NTf2−], with Pt(110) being the most active electrode studied.

Reduction of 1,2-dicarbonyl compounds and of their N-phenylimine derivatives by sodium cyanide under aprotic conditions

Some aromatic 1,2-dicarbonyl compounds, i.e. 9,10-phenanthrenequinone, acenaphthenequinone and benzil, and their corresponding N-phenyl monoimines, have been reduced, using dry acetonitrile as the solvent, in the presence of sodium cyanide as a reducing agent. Comparative potentiostatic preparative-scale electrolysis is described.

Modeling the Effect of Vapor Wall Deposition on the Formation of Secondary Organic Aerosol in Chamber Studies

Laboratory chamber experiments are used to investigate formation of secondary organic aerosol (SOA) from biogenic and anthropogenic precursors under a variety of environmental conditions. Simulations of these experiments test our understanding of the prevailing chemistry of SOA formation as well as the dynamic processes occurring in the chamber itself. One dynamic process occurring in the chamber that was only recently recognized is the deposition of vapor species to the Teflon walls of the chamber. Low-volatility products formed from the oxidation of volatile organic compounds (VOCs) deposit on the walls rather than forming SOA, decreasing the amount of SOA formed (quantified as the SOA yield: mass of SOA formed per mass of VOC reacted). In this work, several modeling studies are presented that address the effect of vapor wall deposition on SOA formation in chambers.

A coupled vapor-particle dynamics model is used to examine the competition among the rates of gas-phase oxidation to low volatility products, wall deposition of these products, and mass transfer to the particle phase. The relative time scales of these rates control the amount of SOA formed by affecting the influence of vapor wall deposition. Simulations show that an effect on SOA yield of changing the vapor-particle mass transfer rate is only observed when SOA formation is kinetically limited. For systems with kinetically limited SOA formation, increasing the rate of vapor-particle mass transfer by increasing the concentration of seed particles is an effective way to minimize the effect of vapor wall deposition.

This coupled vapor-particle dynamics model is then applied to α-pinene ozonolysis SOA experiments. Experiments show that the SOA yield is affected when changing the oxidation rate but not when changing the rate of gas-particle mass transfer by changing the concentration of seed particles. Model simulations show that the absence of an effect of changing the seed particle concentration is consistent with SOA formation being governed by quasi-equilibrium growth, in which gas-particle equilibrium is established much faster than the rate of change of the gas-phase concentration. The observed effect of oxidation rate on SOA yield arises due to the presence of vapor wall deposition: gas-phase oxidation products are produced more quickly and condense preferentially onto seed particles before being lost to the walls. Therefore, for α-pinene ozonolysis, increasing the oxidation rate is the most effective way to mitigate the influence of vapor wall deposition.

Finally, the detailed model GECKO-A (Generator for Explicit Chemistry and Kinetics of Organics in the Atmosphere) is used to simulate α-pinene photooxidation SOA experiments. Unexpectedly, α-pinene OH oxidation experiments show no effect when changing either the oxidation rate or the vapor-particle mass transfer rate, whereas GECKO-A predicts that changing the oxidation rate should drastically affect the SOA yield. Sensitivity studies show that the assumed magnitude of the vapor wall deposition rate can greatly affect conclusions drawn from comparisons between simulations and experiments. If vapor wall loss in the Caltech chamber is of order 10^-5 s^-1, GECKO-A greatly overpredicts SOA during high UV experiments, likely due to an overprediction of second-generation products. However, if instead vapor wall loss in the Caltech chamber is of order 10^-3 s^-1, GECKO-A greatly underpredicts SOA during low UV experiments, possibly due to missing autoxidation pathways in the α-pinene mechanism.

The effect of mobile technology as an active student response system on the acquisition of U.S. history content of secondary students with specific learning disabilities

Students with specific learning disabilities (SLD) typically learn less history content than their peers without disabilities and show fewer learning gains. Even when they are provided with the same instructional strategies, many students with SLD struggle to grasp complex historical concepts and content area vocabulary. Many strategies involving technology have been used in the past to enhance learning for students with SLD in history classrooms. However, very few studies have explored the effectiveness of emerging mobile technology in K-12 history classrooms. ^ This study investigated the effects of mobile devices (iPads) as an active student response (ASR) system on the acquisition of U.S. history content of middle school students with SLD. An alternating treatments single subject design was used to compare the effects of two interventions. There were two conditions and a series of pretest probesin this study. The conditions were: (a) direct instruction and studying from handwritten notes using the interactive notebook strategy and (b) direct instruction and studying using the Quizlet App on the iPad. There were three dependent variables in this study: (a) percent correct on tests, (b) rate of correct responses per minute, and (c) rate of errors per minute. ^ A comparative analysis suggested that both interventions (studying from interactive notes and studying using Quizlet on the iPad) had varying degrees of effectiveness in increasing the learning gains of students with SLD. In most cases, both interventions were equally effective. During both interventions, all of the participants increased their percentage correct and increased their rate of correct responses. Most of the participants decreased their rate of errors. ^ The results of this study suggest that teachers of students with SLD should consider a post lesson review in the form of mobile devices as an ASR system or studying from handwritten notes paired with existing evidence-based practices to facilitate students’ knowledge in U.S. history. Future research should focus on the use of other interactive applications on various mobile operating platforms, on other social studies subjects, and should explore various testing formats such as oral question-answer and multiple choice. ^

A Study of the Microwave Carbothermic Reduction of Chromite Ore

Microwave reduction testing using activated charcoal as a reducing agent was performed on a sample of Black Thor chromite ore from the Ring of Fire deposit in Northern Ontario. First, a thermodynamic model was constructed for the system. Activity coefficients for several species were found in the literature. The model predicted chromium grades of 61.60% and recoveries of 93.43% for a 15% carbon addition. Next, reduction testing on the chromite ore was performed. Tests were performed at increasing power levels and reduction times. Testing atmospheres used were air, argon, and vacuum. The reduced product had maximum grades of 72.89% and recoveries of 80.37%. These maximum values were obtained in the same test where an argon atmosphere was used, with a carbon addition of 15%, optimal power level of 1200 W (actual 1171 W), and a time of 400 seconds. During this test, 17.53% of the initial mass was lost as gas, a carbon grade of 1.95% was found for the sintered core product. Additional work is recommended to try and purify the sintered core product as well as reduce more of the initial sample. Changing reagent schemes or a two step reduction / separation process could be implemented.

Reduction of elasmobranch by-catch in the hake semipelagic near-bottom longline fishery in the Algarve (Southern Portugal)

Elasmobranch fish, particularly deep-sea sharks, are the most important component of the by-catch of the hake semipelagic near-bottom 'pedra-e-bola' longline fishery in the Algarve (South Portugal) and most of these fish are discarded. The effects of the removal of the lower hooks were evaluated, in terms of target and by-catch reductions, by quantifying the catches of each hook relative to the distance from the bottom. The analysis showed that most European hake (Merluccius merluccius), the target species of this fishery, were caught in the middle range of the hooks, with very few individuals caught near the bottom, whereas for sharks the situation was the opposite, with most hooked near the bottom. The removal of the lower three pairs of hooks would result in a small reduction in the catch of the target species, but a much more significant reduction in elasmobranch by-catch. In the specific case of the blackmouth catshark (Galeus melastomus), discard mortality would be further minimized due to the fact that the lower hooks capture significantly smaller animals that are always discarded compared with hooks that are more distant from the bottom.