Heavy-light mesons scattering from nucleons: Quark-gluon and meson exchanges

We investigate the scattering of heavy-light K and D mesons by nucleons at low energies. The short-distance part of the interaction is described by quark-gluon interchange and the longdistance part is described by a one-meson-exchange model that includes the contributions of vector (ρ, ω) and scalar (σ) mesons. The microscopic quark model incorporates a confining Coulomb potential extracted from lattice QCD simulations and a transverse hyperfine interaction consistent with a finite gluon propagator in the infrared. The derived effective meson-nucleon potential is used in a Lippmann-Schwinger equation to obtain s-wave phase shifts. Our final aim is to set up a theoretical framework that can be extended to finite temperatures and baryon densities. © 2010 American Institute of Physics.

Structural refinement, growth mechanism, infrared/Raman spectroscopies and photoluminescence properties of PbMoO4 crystals

Lead molybdate (PbMoO4) crystals were synthesized by the co-precipitation method at room temperature and then processed in a conventional hydrothermal (CH) system at low temperature (70 °C for different times). These crystals were structurally characterized by X-ray diffraction (XRD), Rietveld refinement, micro-Raman (MR) and Fourier transformed infrared (FT-IR) spectroscopies. Field emission scanning electron microscopy images were employed to observe the shape and monitor the crystal growth process. The optical properties were investigated by ultraviolet-visible (UV-Vis) absorption and photoluminescence (PL) measurements. XRD patterns and MR spectra indicate that these crystals have a scheelite-type tetragonal structure. Rietveld refinement data possibilities the evaluation of distortions in the tetrahedral [MoO 4] clusters. MR and FT-IR spectra exhibited a high mode ν1(Ag) ascribed to symmetric stretching vibrations as well as a large absorption band with two modes ν3(Eu and Au) related to anti-symmetric stretching vibrations in [MoO 4] clusters. Growth mechanisms were proposed to explain the stages involved for the formation of octahedron-like PbMoO4 crystals. UV-Vis absorption spectra indicate a reduction in optical band gap with an increase in the CH processing time. PL properties of PbMoO4 crystals have been elucidated using a model based on distortions of tetrahedral [MoO4] clusters due to medium-range intrinsic defects and intermediary energy levels (deep and shallow holes) within the band gap. © 2012 Elsevier Ltd. All rights reserved.

Micro-raman spectroscopic characterization of a CR-39 detector

Characterization by micro-Raman spectroscopy of polymeric materials used as nuclear track detectors reveals physico-chemical and morphological information on the material's molecular structure. In this work, the nuclear track detector poly(allyl diglycol carbonate), or Columbia Resin 39 (CR-39), was characterized according to the fluence of alpha particles produced by a 226Ra source and chemical etching time. Therefore, damage of the CR-39 chemical structure due to the alpha-particle interaction with the detector was analyzed at the molecular level. It was observed that the ionization and molecular excitation of the CR-39 after the irradiation process entail cleavage of chemical bonds and formation of latent track. In addition, after the chemical etching, there is also loss of polymer structure, leading to the decrease of the group density C-O-C (∼888 cm-1), CH=CH (∼960 cm -1), C-O (∼1110 cm-1), C-O-C (∼1240 cm -1), C-O (∼1290 cm-1), C-O (∼1741 cm -1), -CH2- (∼2910 cm-1), and the main band -CH2- (∼2950 cm-1). The analyses performed after irradiation and chemical etching led to a better understanding of the CR-39 molecular structure and better comprehension of the process of the formation of the track, which is related to chemical etching kinetics. Copyright © 2013 Society for Applied Spectroscopy.

Small-angle X-ray scattering and structural modeling of full-length: Cellobiohydrolase I from Trichoderma harzianum

Cellobiohydrolases hydrolyze cellulose releasing cellobiose units. They are very important for a number of biotechnological applications, such as, for example, production of cellulosic ethanol and cotton fiber processing. The Trichoderma cellobiohydrolase I (CBH1 or Cel7A) is an industrially important exocellulase. It exhibits a typical two domain architecture, with a small C-terminal cellulose-binding domain and a large N-terminal catalytic core domain, connected by an O-glycosylated linker peptide. The mechanism by which the linker mediates the concerted action of the two domains remains a conundrum. Here, we probe the protein shape and domain organization of the CBH1 of Trichoderma harzianum (ThCel7A) by small angle X-ray scattering (SAXS) and structural modeling. Our SAXS data shows that ThCel7A linker is partially-extended in solution. Structural modeling suggests that this linker conformation is stabilized by inter- and intra-molecular interactions involving the linker peptide and its O-glycosylations. © 2013 Springer Science+Business Media Dordrecht.

Photoluminescence properties of praseodymium doped cerium oxide nanoparticles

The structural and photoluminescent properties at room temperature of CeO2 nanoparticles synthesized by a Microwave-Assisted Hydrothermal Method (MAH) under different praseodymium contents was undertaken. X-ray Diffraction (XRD), Transmission Electron Microscopy (TEM), UV-vis Spectroscopy (UV-vis), Fourier Transform Raman (FT-Raman) and Photoluminescence (PL) measurements were employed. XRD revealed that the nanoparticles are free of secondary phases and crystallize in the cubic structure while FT-Raman revealed a typical scattering mode of fluorite type. The UV/vis absorption spectroscopy suggested the presence of intermediate energy levels in the band gap of structurally ordered powders. The most intense PL emission was obtained for nanoparticles which represent a lower particle size. © 2013 Elsevier Ltd and Techna Group S.r.l.

Sodium dodecyl sulfate (SDS) effect on the thermal stability of oxy-HbGp: Dynamic light scattering (DLS) and small angle X-ray scattering (SAXS) studies

Glossoscolex paulistus (HbGp) hemoglobin is an oligomeric protein, presenting a quaternary structure constituted by 144 globin and 36 non-globin chains (named linkers) with a total molecular mass of 3.6MDa. SDS effects on the oxy-HbGp thermal stability were studied, by DLS and SAXS, at pH 5.0, 7.0 and 9.0. DLS and SAXS data show that the SDS-oxy-HbGp interactions induce a significant decrease of the protein thermal stability, with the formation of larger aggregates, at pH 5.0. At pH 7.0, oxy-HbGp undergoes complete oligomeric dissociation, with increase of temperature, in the presence of SDS. Besides, oxy-HbGp 3.0mg/mL, pH 7.0, in the presence of SDS, has the oligomeric dissociation process reduced as compared to 0.5mg/mL of protein. At pH 9.0, oxy-HbGp starts to dissociate at 20°C, and the protein is totally dissociated at 50°C. The thermal dissociation kinetic data show that oxy-HbGp oligomeric dissociation at pH 7.0, in the presence of SDS, is strongly dependent on the protein concentration. At 0.5mg/mL of protein, the oligomeric dissociation is complete and fast at 40 and 42°C, with kinetic constants of (2.1±0.2)×10-4 and (5.5±0.4)×10-4s-1, respectively, at 0.6mmol/L SDS. However, at 3.0mg/mL, the oligomeric dissociation process starts at 46°C, and only partial dissociation, accompanied by aggregates formation is observed. Moreover, our data show, for the first time, that, for 3.0mg/mL of protein, the oligomeric dissociation, denaturation and aggregation phenomena occur simultaneously, in the presence of SDS. Our present results on the surfactant-HbGp interactions and the protein thermal unfolding process correspond to a step forward in the understanding of SDS effects. © 2013 Elsevier B.V.

Local order of Pb1-xLaxZr0.40Ti 0.60O3 ferroelectric ceramic materials probed by X-ray absorption and Raman spectroscopies

This paper reports on the structural characterization of Pb 1-xLaxZr0.40Ti0.60O3 (PLZT) ferroelectric ceramic compositions prepared by the conventional solid state reaction method. X-ray absorption spectroscopy (XAS) and Raman spectroscopy were used to probe the local structure of PLZT samples that exhibits a normal and relaxor ferroelectric behavior. From the Zr K-edge and Pb LIII-edge EXAFS spectra, a considerable dissymmetry of Zr and Pb sites was observed in all samples, including those showing a long-range order cubic symmetry and a relaxor behavior. The Raman spectroscopy results confirmed the existence of a local disorder in all PLZT samples through the observation of Raman active vibrational modes. The variation in the intensity of the E(TO 3) mode in the PLZT relaxor samples indicates that the process of correlation between nanodomains stabilizes at temperatures lower than T m. © 2013 Elsevier B.V. All rights reserved.

Análise ex vivo de hiperplasia fibrosa inflamatória de mucosa jugal por espectroscopia FT-Raman

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Caracterização do mineral zircão através do método de traços de fissão, espectroscopia micro-raman e MEV: geocronologia do grupo Bauru

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Projeto e construção de um espectrômetro de fotoacústica: aplicação para determinação da energia de laser pulsado

Pós-graduação em Física - IGCE

Avaliação das alterações de cor e análise da composição mineral do esmalte dental bovino após clareamento com peróxido de hidrogênio utilizando fotorreflectância e espectroscopia FT-raman

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Espectroscopia FT-Raman no diagnóstico do carcinoma espinocelular de mucosa bucal: estudo ex vivo em humanos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Some mathematical aspects and scattering amplitudes in the pure spinor formalism

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Medidas de espectroscopia Raman em cristais KDP e Nanotubos de Carbono: implementação da técnica

Atualmente, os físicos vêm desenvolvendo novas técnicas de caracterização de materiais, principalmente os novos materiais que os cientistas (de todas as áreas) estão produzindo a partir de outros já existentes como vidros, cerâmicas, polímeros, materiais semicondutores e supercondutores, materiais magnéticos, dentre outros. Seguindo esta linha, o Grupo de Física de Materiais da Amazônia vem adquirindo novas técnicas para caracterização de materiais e este trabalho marca o início da incorporação de mais uma técnica de caracterização junto ao laboratório de física da UFPA, a Espectroscopia Raman. Neste trabalho, utilizamos como amostras para realizar e testar a técnica implantada, cristais KH2PO4 (KDP) e nanotubos de carbono de parede simples (SWNT). O KDP foi escolhido devido ao fato de ter os espectros Raman muito conhecidos e ser um material de simples produção. O KDP puro ou dopado continua sendo alvo de pesquisa (teórica e/ou experimental) atual, principalmente por apresentar uma transição de fase ferroelétrica e ser um material que tem muitas aplicações nas indústrias que utilizam tecnologia de lasers, sensores, gerador de segundo e terceiro harmônico. Já os nanotubos de carbono também foram utilizados como amostras por ser um material de grande interesse científico, tecnológico e de grande aplicação no mundo moderno, pois podem ser empregados em nanotecnologia na produção de transistores e diodos, além disso, podem ser incorporados a certos materiais aumentando, assim, a resistência mecânica dos mesmos.Para as amostras de KDP foram realizadas medidas em temperatura ambiente, pressão uniaxial e temperatura. Nas medidas com a temperatura conseguimos observar o inicio da decomposição e de uma possível transição de fase em alta temperatura no KDP. As medidas com pressão uniaxial mostram que embora não se observe uma transição de fase bem definida é possível se identificar alteração que podem indicar o inicio de uma quebra de simetria devido aos efeitos de pressão. Nas amostras de nanotubos (nanotubos de paredes simples-SWNT) foram realizadas medidas de Raman em temperatura ambiente. Nessas medidas identificamos as bandas D e G bastante conhecidas as quais são reportadas em quase todos os artigos sobre esse tema. O mais importante foi a implantação da nova técnica que é uma técnica forte que pode ser aplicada em diferentes campos do conhecimento científico fortalecendo o Grupo de Física de Materiais da Amazônia.

Espectrometria Raman, UV, DOS e Circular Dicroísmo de alcalóides do cigarro

Esta dissertação aborda a análise espectroscópica de algumas estruturas moleculares presentes no tabaco (Nicotiana glauca), matéria-prima do cigarro, e suas interações com a molécula de DNA. De acordo com sua importância, dentre a grande variedade presentes no cigarro, às moléculas estudadas foram as derivadas do ácido nicotínico: ácido nicotínico (niacina/vitamina B3), nicotinamida, trigonelina, nicotina, nornicotina e anabasina. As otimizações dessas estruturas foram inicialmente obtidas no software computacional Hyperchem 8.0, baseadas na teoria da mecânica molecular. Em seguida, elas foram otimizadas, utilizando-se o método de Teoria do Funcional da Densidade, na base B3LYP/ 6-311++G(d,p), simulado no software Gaussian 03. Uma vez as estruturas otimizadas, obtivemos os espectros de absorção UV, Raman, Infravermelho, Dicroísmo Circular e Densidade de Estados para caracterizar as mesmas utilizando método de Teoria do Funcional da Densidade Dependente do Tempo, também simulados no mesmo software. Ao final desse processo, foi também simulado via mecânica molecular, as interações dessas estruturas com a molécula de DNA com o intuito de verificar a potencialidade cancerígena, ou não, dessas substâncias.