Utilization of waste waters in fish production: preliminary results from fish culture studies in floating cages in a sewage pond, New Bussa, Nigeria

The utilization of waste waters in aquaculture were briefly reviewed. At the National Institute for Freshwater Fisheries Research (NIFFR), stocking density (20 to 160 fish/m super(3)) experiments using Sarotherodon galilaeus (without supplementary feeding) in floating cages were carried out in a sewage pond (0.4ha surface area). Cage culture of S. galilaeus was observed to have potentials in waste waters aquaculture. Recommendations were made on the execution of an intergrated waste water management and utilization.

Workshop on climate change and salmon production, Vancouver, March 26-27, 1998: technical report

The Workshop on Climate Change and Salmon Production was held in Vancouver, Canada, 26-27 March 1998. The Workshop was organized and sponsored by the North Pacific Anadromous Fish Commission (NPAFC). Each Party to the Commission designated one scientist to the Workshop Steering Committee. Each member of the Steering Committee chaired one half-day session of the Workshop. All necessary arrangements were made by the NPAFC Secretariat in cooperation with the Steering Committee and the Canadian Party to the Commission. (PDF contains 60 pages) Over 70 scientists, industry representatives and fisheries officials attended the Workshop. There were 20 presentations of scientific papers followed by the discussion sessions. Extended abstracts are included in this Technical Report, which also contains opening address by the Chairman of the Steering Committee and short review of the Workshop by the Coordinator. The material presented in the Technical Report has not been peer reviewed and does not necessarily reflect the views of either the NPAFC or the Parties. The material has been edited by the technical editor for clarity and publication purposes only. Items in this Report should not be cited except as personal communication and with the author's permission.

Potentials for fisheries in the Niger Delta: Another green light for self sufficiency in regional food production

A discussion is presented on the potential for fishery development in the Niger Delta region, considering engineering activities and food production potentials of the freshwater zone and immediate hinterland, the brackishwater mangrove swamps and the estuaries. An examination of current trends in the environment indicates that a possible solution to improved exploitation of the region lies in hydraulic engineering, the manipulation of environmental conditions through varying freshwater and seawater inputs so as to increase aquatic and wetland productivity

The use of locally available materials in fish feed production

In Nigeria, the culture of fish is gaining importance, but local fish farmers face a set back because of the stoppage on importation of fish feed. Locally available raw materials such as yam, plantain, banana, cowpeas, macuna, maize, cassava, millet, sorghum, groundnut, sunnhemp seed and brewery wastes are considered as potential materials for fish feed. These have been examined on their minimum protein contributions since this is the most expensive part of the fish feed. Alternative sources to animal proteins are also examined. Plant protein from groundnut, melon, mucuna and others compare favourably with bloodmeal mixture and thus can be used to replace the more expensive animal proteins. Pellet feed can be produced on a small scale or commercial basis from the locally available raw materials and the fish farmer is advised to seek assistance from qualified fisheries personnel

Small scale commercial production of tilapia fingerlings in floating bamboo net-hapas

The inadequate supply of tilapia seed is considered as one of the major present constraints to the development of the culture industry in Nigeria. The floating bamboo net-hapa hatchery/nursery system was observed to be very efficient in the mass production of tilapia (Oreochromis niloticus) fry and fingerlings at Kainji Lake Research Institute. This system was therefore, recommended for small-scale (artisanal) commercial operators consisting of fishermen families in order to increase their productivity and hasten development of rural communities. The economic analysis of this system showed that loan obtained for the recommended scale of operation can be amortized within 2 years of the project. It was emphasized that the operational and managerial skills of the fish farm operators account largely to the production cost and profitability of the enterprise

Fish production from aquatic weeds

Irrigation in the eleven River Basin Authorities and in particular in the South Chad Irrigation Project and the Baga Polder Project is increasing and demands high yearly investments for aquatic weed control in canals and drains. If the weeds are biologically controlled by the grass carp (Ctenopharyngodon idella Val.), the costs will be turned into profit, particularly when the fish production (resident fish plus grass carp) is harvested and sold for food. The use of irrigation canals and drains for aquaculture in the form of fish polyculture may be a wise step towards increased fish production. This paper highlights the concept of fish production from aquatic weed control and concludes that it is a proven profitable venture in several countries

Modern aquaculture practices for increased fish production in Nigeria

Various modern aquaculture practices applied in fish production especially in Asia are reviewed. The vast Nigerian aquatic medium of numerous water bodies like rivers, streams, lakes reservoirs, flood plains, irrigation canals, coastal swamps offer great potentials for aquaculture production, if optimally utilized. Constraints to modernization of aquaculture in Nigeria among other factors are: 1) a serious shortage of trained manpower; 2) lack of knowledge on profitability of aquaculture as an industry; 3) limited availability of fund (or capital); 4) non-recognition of indigenous trained aquaculture personnel; 5) inadequate data base on the biology and ecological requirements of endemic fish species with aquaculture potentials; 6) insufficient data on production and management techniques; and 7) lack of rational aquaculture development planning. Recommendations are made towards combating these constraints

Small-scale commercial production of tilapia fry and fingerlings in concrete raceways

This paper discusses the investment prospects in Tilapia fry and fingerling production in raceways created from the concrete drainage channel of a reservoir or pond of an existing fish farm in Nigeria. With an initial capital of 1,300 and an annual operating cost of 310 spent on procurement of fish feed and brood stock for a 10 m super(2) raceway per se, a net profit of 4,100 and 5,090 would be realized from Sarotherodon galilaeus in the first year and subsequent years of production respectively, assuming that the fingerling production rate has been maintained through the production period. It is concluded that the application of this approach of optimizing the use of available resources in the fish farm for the productive breeding of Tilapia fry and fingerlings will apart from alleviating the problem of scarcity of stocking materials in the country, increase the profit margin accruing to the fish farmer

Commercial production of Clarias fry and fingerlings in indoor and outdoor concrete tank systems

Induced breeding technique by hypophysation is being applied at the Kainji Lake Research Institute Fisheries Division Hatchery complex in New Bussa, Nigeria, for the production of Clarias fry and fingerlings in indoor and outdoor concrete tank systems. The hatchlings are fed on livefood (zooplankton) and artificial feed. Source of zooplankton is from cultured stock which is maintained throughout the breeding season by fertilization. Production values show that an average of over 4,000 hatchlings (larvae) can be produced by a female breeder (over-700g wt) and percentage survival after two months ranges between 70 to 75%. With the proposed modification and expansion project, an estimated production of over 0.5 million fingerlings per breeding season is projected

Investment prospects in the production of the common carp (Cyprinus carpio) fingerlings in freshwater ponds

Since the introduction of Common carp Cyprinus carpio in Oyo State (Nigeria) from Israel in 1964, various local breeding methods have been employed in carp rearing to improve the survival rate at all stages of development during breeding. The physico-chemical parameters of the ponds which were simultaneously investigated for carp rearing in this study includes temperature (t), dissolved oxygen (DO) and hydrogen-ion concentration (pH). However, high rates of water displacement in the breeding ponds were unfavourable to the development of zooplankton which play important role in the food web of C. carpio. The survival rates of 15.88-69.50% and 19.60-33.83% obtained for the egg-hatchling and hatchling-fingerling stages respectively were encouraging. A breeding performance of this magnitude was found to be viable, breaking even in the fourth year. However, an increase in size of this trial project would be more profitable and increase fingerling supply as well as provide employment opportunities. This study thereby provides some baseline information on some local techniques and progress in the propagation of C. carpio and scope for further improvement

The potentials for commercial production of fish feeds in Nigeria

Studies in fish feed technology revealed that there is a potential for big time investment into fish feed production and marketing in view of the growing awareness of fish farming in Nigeria. Intensification of aquaculture is one of the primary methods of food (finfish) production which requires technical knowledge and expertise in the formulation and manufacture of adequate feeds for the cultured species. Studies also revealed that all sort of food items were used by fish farmers ranging from animal dung, groundnut cake etc, to culture fish to table size because of non-availability of rightly prepared feeds. Inadequate knowledge of detailed requirements of tropical cultured species was found to pose a hindrance to formulation despite the fact that a lot has been accumulated in terms of biochemical and nutritive values of food sources in Nigeria. The investigation further revealed the challenges posed to researchers in aquaculture, fish nutritionists and fisheries biologists among others to elucidate the complete requirements of local fish species in terms of their protein, lipid and carbohydrate requirements such that their patents could be made available to companies like PFIZER, IBRU etc, and individuals alike to make commercialization of fish feeds a reality

Commercial production of natural freshwater fish food

A review is made of some of the methods that can be used for mass cultivation of natural fish food and the types of organisms that are cultured, which include various algae and zooplankton. Some examples are given of successful case histories in the mass cultivation of natural fish food in order to stimulate the interest of Nigerian scientists on research activities of live fish food for use by fish farmers in the country

Commercial production of fish meal from fish waste

The importance of fish meal production as a means of reducing fish waste currently being experienced in the fisheries subsector is discussed. Cost estimate for Nigeria establishing a fish meal manufacturing plant and suggestions on rational execution of the project are presented. If properly located and well managed, the project will serve to convert fish waste to cash in the industrial fishery

The economic impact of diseases and parasitic problems in freshwater fish production

Diseases and parasitic problems could constitute significant economic losses in fish production if not controlled, thus the need to continue monitoring its prevalence. Based on field studies on feral and intensively raised fish at the Kainji Lake Research Institute Nigeria, some diseases and parasitic problems have been identified. These include; helminthiasis; fungal disease; protozoa which include Myxosoma sp., Myxobolus spp., Henneguya sp., Trichodina sp., Ichthopthrius sp. bacterial mainly Aeromonas sp., Pseudomonas sp., mechanical injuries; death due to unknown causes and economic assessment of myxosporidian infection. Suggestion for disease control in fish production are recommended