A Study of the Physical Properties of Low Tin Solders

In 1947, out of the 100,000 long tons of tin con­sumed in the United States, 25,000 tons went into solder. Tin plate took 39,000 tons while babbit, bronze and coll­apsible tubes accounted for approximately 17,000 tons. Solder ranked second to tin plate and required more than the next three major uses combined.

Flotation Concentration of a Montana Lead-Zinc-Silver-Ore

The Mike Horse mine, in the Huddelston mining district, is fifty-two miles northwest of Helena, Montana. The mine was discovered in 1898 by Joseph Heitmiller. There was only minor production from the date of discovery until 1915; the main drawback being lack of good road.

A Preliminary Study of the Benefication of Montana Kyanite

This investigation is a preliminary study of the beneficiation of Montana kyanite, and while preliminary in degree the information gained may serve as a guide for the eventual exploitation of this Montana resource.

Foraminifera from Pleistocene beds near San Pedro, California

The age of rocks found in drill cores, and consequently the depths to possible oil-bearing formations has in many localities been determined by micro-paleontologic studies during the past three decades. Of the different micro-fossils used in this work, foraminifera have been studied most, are the best described, and hence, by far the most helpful.

The Electrodeposition of Iron-Manganese Alloys

Although the alteration of properties resulting from the alloying of metals in their usual commercial forms has been extensively investigated, the field of electrodeposition of alloys is believed generally not to have received the atten­tion that it merits.

An Investigation of the Anodic Oxidation of Aluminum in a Sulfuric Acid Electrolyte

When aluminum is allowed to stand in air or is heated in air, a thin oxide film is produced on the metal. If aluminum is made the anode in a suitable electrolyte and a current applied, a coating is obtained which is similar to that produced in air, but may be effected much quicker. This film is thicker, harder, more resistant to corrosion and abrasion, and more adhesive than the natural oxide. The film is porous and makes an excellent adsorptive for dyes and pigments.

The Continuous Electrodeposition of Manganese

The object of this research was to produce a workable electrolytic cell for the continuous deposition of manganese from aqueous sulphate solutions and determine the critical factors in its oper­ation.

A Mineral Dressing Study of the U.S. Grant Ore

This investigation concerns the development of a satis­factory method or extracting or concentrating gold and silver from the ores of the U. S. Grant Mine. The choice between applying an extractive process and one by which the valuable mineral constituents are concentrated depends on more than one factor.

Sulfatizing Roasting of a Copper Sulfide Ore

At present copper sulfide ores are recovered by pyrometallurgical processes. While the recovery of cop­per from sulfide ores by hydrometallurgical means has long been considered attractive, the impurities, low re­covery and mechanical difficulties have kept this process from becoming commercial.

Oxygen Enriched Atmosphere Roasting

The possible benefits of oxygen enriched atmosphere roasting have been known to metallurgists for many years, but only since the development of equipment and processes to produce cheap oxygen in very large amounts has much ser­ious consideration been given this matter.

Karst Kamp Asbestos Deposits Gallatin County, Montana

Karst Kamp, a southwestern Montana recreation re­sort, is 32 road miles south of Bozeman on the east bank of the Gallatin River in a narrow V-shaped valley flanked on the west by the rugged Madison mountain range and on the east by the equally rough Gallatin range. The asbestos deposit itself lies approximate­ly one-half mile northwest of the ranch on a heavily timbered "Al­pine-like" slope nearly 1200 feet above the floor of the valley.

Geology 63: Geological Report of Senior Field Trip

The field work was conducted in areas adjacent to White­hall, Montana, as has been the custom for the past several years. Instruction in the proper use of the telescopic and open sight alidades, and the Brunton compass for surveying geologic features was given. Advantages of pacing and speed­ometer mapping were pointed out and used.

Geology of the Lost Creek-Modesty Creek Area Deerlodge County, Montana

In 1915 the United States Geological Survey published a folio by Calkins and Emmons on the geology of the Philipsburg Quadrangle, which ad­joins the area now under study to the west. Geology of this portion of Montana had not been mapped previously; consequently the purpose of this thesis is to make a geological reconnais­sance of the stratigraphy and structure of the area.

Geology of Montana

A vast amount of information has been published by many workers on particular features of the geology of the state of Montana, as well as on local geology of many smaller divi­sions. However, a satisfactory summary of the geology in general, which would include all phases of geology as they apply to the greater area of the entire state, has not been published.

A Study of the Action of Various Energizers in the Carburization of Steel

The object of casehardening is to produce articles of steel having a tough or ductile interior and a hard sur­face. Quenching produces a surface somewhat harder than the interior, but in order to obtain a high surface hard­ness, the percentage of alloying elements in the steel must be raised to such an extent that the core or central por­tion becomes hard and brittle also.