高分子溶液中物理凝胶化的Monte Carlo模拟和小角中子散射研究

高分子凝胶广泛地存在于自然界以及日常生活中，按其形成作用力不同分为化学凝胶和物理凝胶两大类。由于高分子物理凝胶具有凝胶化的可逆性及其对环境条件强烈的响应性，因此，在近半个世纪的研究与应用中受到极大的关注。高分子溶液中的物理凝胶因其结构及形成机制复杂，在实验方面，除了散射技术及流变技术能够有效地揭示它的部分信息外，其它的实验手段很难用于这个领域的研究；在理论方面，化学凝胶的理论已经比较成熟，而物理凝胶的粘弹性质以及凝胶化是一个远离平衡态的松弛过程，除了一些特征的标度指数外，人们还没有得到适用于高分子物理凝胶的普适规律。当前，由于计算机模拟理论及模拟方法的发展，使得计算机模拟成为除了实验和理论研究方法之外的第三个重要的研究方法。但是，由于物理凝胶化行为的复杂性，用实验和理论获得的信息很难较好地描述凝胶化过程，而计算机模拟的高度透明性及反映信息的完整性，有助于理解这一复杂过程中所涉及的物理本质。因此，利用计算机模拟结合实验及理论方法深入研究高分子物理凝胶的形成机制、结构与性能关系已成为目前最有效的手段之一。 本论文主要运用Monte Carlo模拟方法，并结合小角中子散射（Small-Angle Neutron Scattering, SANS）和流变（Rheology）等实验手段从多个角度探讨了以下几类典型的高分子溶液物理凝胶化行为。 1. 温度对遥爪型三嵌段共聚物在选择性溶剂中的自组装及凝胶化行为影响的研究：采用二维简单方格子Monte Carlo模拟方法，结合逾渗（Percolation）理论，建立了溶胶－凝胶转变相图在统计热力学中的确定方法；甄别了具有特征构象的链，讨论了链及胶束的聚集，明晰了相互作用（体现为约化温度）、构象转变、聚集与凝胶化的一致的关联关系；提出了构象转变模型，进而明确了此体系的凝胶化过程，在微观尺度上表现为桥型链和环型链之间的竞争。 2. 模拟模型改进及其应用到持续长度对稀溶液中高分子链构象影响的研究：考虑到原始八位置键涨落模型效率低，实现复杂且不能应用到复杂的高分子体系，对该模型进行了改进，使其实现简单、效率高，并拓宽了该模型的应用范围。然后，以刚性对均聚物构象的影响为例，发现随着刚性增加，均聚物构象从球形椭球到棒状椭球的转变，并对比了自由连接链（Free Joint Chain, FJC）模型和蠕虫链（Wormlike Chain, WLC）模型在不同刚性范围内对高分子链末端距预测的偏差，首次给出了这两个经典模型的半定量的适用边界。 3. 溶剂尺寸对遥爪型三嵌段共聚物在选择性溶剂中的自组装及凝胶化行为影响的研究：用改进后的八位置键涨落Monte Carlo模型，研究了遥爪型三嵌段共聚物在选择性溶剂条件下的聚集和凝胶化对溶剂尺寸的依赖性，发现溶剂尺寸效应对凝胶化的作用是非单调的。由一个均聚物体系的对比模拟证明这种作用主要是由熵驱动的，并给出了中分子溶剂的半定量定义。在均聚物和嵌段共聚物溶液中，不同尺寸的溶剂分子可以使溶液由于高分子聚集不同而具有不同的微结构，并影响高分子链构象和溶液的性质。从多个角度研究了三嵌段共聚物在不同尺寸溶剂的溶液中所遵循的三种不同的凝胶化机理。 4. 聚氧化乙烯－氧化丙稀－氧化乙烯三嵌段共聚物（poly(ethylene oxide)-poly (propylene oxide)-poly-(ethylene oxide), PEO-PPO-PEO）重水溶液凝胶化的小角中子散射（SANS）和Monte Carlo研究：结合Pluronic F127（EO65PO99EO65）/D2O三嵌段共聚物溶液的特征，对照SANS数据，用改进后的八位置键涨落模型成功地从模拟中获得了F127/D2O的溶胶－凝胶转变相图。详细地考察了体系的微观结构，提出此类高分子溶液中形成的物理凝胶包含高分子逾渗网络的生成，以及被束缚溶剂（Bound Solvent）必须超过离散组分体系逾渗的临界体积分数的机理。着重研究了一定浓度的F127水溶液随温度升高引起的溶胶－凝胶转变以及凝胶－溶胶转变的Reentrant相行为，发现体系在低温区域的溶胶－凝胶转变遵循相同的机理，而在中等温度和较高温度以及不同浓度区域中的凝胶－溶胶转变遵循不同的机理。 5. 极性基团饱和度和溶剂条件对两亲性聚合物在溶液中的聚集行为和凝胶化影响的研究：用改进后的八位置键涨落模型，针对两亲性聚合物在不同溶剂条件的溶液建立了粗粒化模型，以两亲性聚合物中极性基团的饱和度，溶剂条件和高分子浓度为变量，考察了其对链构象、聚集及其凝胶化的影响。 6. 多糖水溶液凝胶化的流变和小角中子散射研究：用流变和SANS考察了两个多糖水溶液中物理凝胶化过程，针对由氢键主导的水基凝胶体系的典型特征进行了讨论，从分子链构象，聚集体结构及其关联以及流变特征等方面对聚强电解质角叉胶（Carrageenan）水溶液和聚弱电解质明胶（Pectin）水溶液进行了详细的讨论。考察了不同多糖的种类（聚合物链的电荷密度），盐的种类和浓度，溶液温度等对凝胶化和凝胶结构的影响，分析了不同多糖溶液的凝胶化机理。

Magnetospectroscopy of bound phonons in high purity GaAs

Far infrared magnetophotoconductivity performed on high purity GaAs reveals the existence of fine structures in the resonant magnetopolaron regions. The fine structures are attributed to the presence of bound phonons due to multiphonon processes. We demonstrate that the magnetopolaron energy spectrum consists of bound phonon branches and magnetopolaron branches. Our results also indicate that different phonons are bound to a single impurity, and that the bound phonon in Si-doped GaAs is a quasilocalized mode.

Thermally Stable Guest-Host Polyetherketone Poled Polymer for Electro-Optical Applications

The high glass transition temperature polymer polyetherketone doped with disperse red 13 (DR13/PEK-c) has been prepared by the spin-coating method. Through in situ second-harmonic generation, the corona poling temperature was optimized by measuring the temperature dependence of the in situ second-harmonic generation signal intensity under the poling electric field. The linear electro-optic coefficients of the poled polymer films have been determined at 632.8 nm by using a simple interferometric technique. The polymer system was measured after 13 000 h, and found that it remained at 80% of its initial value.

An investigation on fiber coupled polymer waveguide for electro-optic modulator

A novel crosslinkable polyurethane is used as the core layer of the electro-optic(E-O) modulator. The refractive index and dispersion of this material have been detected by analyzing the F-P oscillation in transmission spectra. Calculated results from the effective index method are given to design the Mach-Zehnder and straight 5-layer ridge wave-guide device (including the metal electrodes). With light at 1.31 mum being fiber coupled into waveguide, the mode properties of these devices have been demonstrated in a micron control system. The guided mode is accordant with the theoretical analysis.

Fluorescence Hydrogen Peroxide Probe Based on a Microstructured Polymer Optical Fiber Modified with a Titanium Dioxide Film

A highly sensitive microstructured polymer optical fiber (MPOF) probe for hydrogen peroxide was made by forming a rhodamine 6G-doped titanium dioxide film on the side walls of array holes in an MPOF. It was found that hydrogen peroxide only has a response to the MPOF probe in a certain concentration of potassium iodide in sulfuric acid solution. The calibration graph of fluorescence intensity versus hydrogen peroxide concentration is linear in the range of 1.6 x 10(-7) mol/L to 9.6 x 10(-5) mol/L. The method, with high sensitivity and a wide linear range, has been applied to the determination of trace amounts of hydrogen peroxide in a few real samples, such as rain water and contact lens disinfectant, with satisfactory results.

Cellulose acetate polymer film modified microstructured polymer optical fiber towards a nitrite optical probe

A novel microstructured polymer optical fiber (MPOF) probe for nitrites (NO(2)(-)) detection was made by forming rhodamine 6G (Rh 6G)-doped cellulose acetate (CA) on the side wall of array holes in a MPOF It was found that the MPOF probe only have a response to nitrites in a certain concentration of sulfuric acid solution The calibration graph of fluorescence intensity versus nitrites concentration was linear in the range of 2.0 x 10(-4) g/ml-5.0 x 10(-3) g/ml. The method possesses case of chemical modification, low cost design, and potential for direct integration with existing instrumentation, and has been applied to the determination of nitrites in real samples with satisfactory results. (C) 2010 Elsevier B.V. All rights reserved

PEGylated Phospholipid Membrane on Polymer Cushion and Its Interaction with Cholesterol

By employing poly(ethylene glycol) (PEG) shielding and a polymer cushion to achieve air stability of the lipid membrane, we have analyzed PEG influence on dried membranes and the interaction with cholesterol. Small unilamellar vesicles (SUVs) formed by the mixture of 1,2-dimyristoylphosphatidylcholine (DMPC) with different molar fraction of 1,2-distearoyl-sn-glycero-3-phosphoethanolamine-N-[methoxy(poly(ethylene glycol))-2000] (DSPE-PEG(2000)) adsorb and fuse into membranes on different polymer-modified silicon dioxide surfaces, including chitosan, poly(L-lysine) (PLL), and hyaluronic acid, Dried membranes arc further examined by ellipsometer and atomic force microscopy (AFM). Only chitosan can support a visible and uniform lipid array. The thickness of dry PEGylated lipid membrane is reduced gradually as the molar fraction of PEG increases. AFM scanning confirms the lipid membrane stacking for vesicles containing low PEG, and only a proper amount of PEG can maintain a single lipid hi lover; however, the air stability of the membrane will be destroyed if overloading. PEG. Cholesterol incorporation can greatly improve the structural stability of lipid membrane, especially for those containing high molar fraction of PEG. Different amounts of cholesterol influence the thickness and surface morphology of dried membrane.

Elastic scattering angular dispersion of weakly bound nucleus F-17

The differential cross-sections for elastic scattering of F-17 and O-17 on Pb-208 have been measured at Radioactive Ion Beam Line at Lanzhou (RIBLL). The variation of the logarithms of differential cross-sections with the square of scattering angles, viz. angulax dispersion plot, shows clearly that there exists a turning point in the range of small scattering angles (6 degrees-20 degrees) for F-17 due to its exotic structure, while no turning point was observed for O-17. The experimental results have been compared with previous data of other groups. Systematical analysis on the available data seems to conclude that there is an exotic behavior of elastic scattering angular dispersion of weakly bound nuclei with halo or skin structure as compared with that of the stable nuclei. Therefore the fact that the turning point of the elastic scattering angular dispersion plot appears at small angle for weakly bound nuclei can be used as a new probe to investigate the halo and skin phenomenon.