The tectonically controlled emplacement of a vertically sheeted gabbro-pyroxenite intrusion: Feeder-zone of an ocean-island volcano (Fuerteventura, Canary Islands)

The Miocene PX1 gabbro-pyroxenite pluton, Fuerteventura, Canary Islands, is a 3.5 x 5.5 km shallow-level intrusion (0.15-0.2 GPa and 1100-1120 degrees C), interpreted as the feeder-zone to an ocean-island volcano. It displays a vertical magmatic banding expressed in five 50 to 100 metre-wide NNE-SSW trending alkaline gabbro sequences alternating with pyroxenites. This emplacement geometry was controlled by brittle to ductile shear zones, generated by a regional E-W extensional tectonic setting that affected Fuerteventura during the Miocene. At a smaller scale, the PX1 gabbro and pyroxenite bands consist of metre-thick differentiation units, which suggest emplacement by periodic injection of magma pulses as vertical dykes that amalgamated, similarly to a sub-volcanic sheeted dyke complex. Individual dykes underwent internal differentiation following a solidification front parallel to the dyke edges. This solidification front may have been favoured by a significant lateral/horizontal thermal gradient, expressed by the vertical banding in the gabbros, the fractionation asymmetry within individual dykes and the migmatisation of the wall rocks. Pyroxenitic layers result from the fractionation and accumulation of clinopyroxene +/- olivine +/- plagioclase crystals from a mildly alkaline basaltic liquid. They are interpreted as truncated differentiation sequences, from which residual melts were extracted at various stages of their chemical evolution by subsequent dyke intrusions, either next to or within the crystallising unit. Compaction and squeezing of the crystal mush is ascribed to the incoming and inflating magma pulses. The expelled interstitial liquid was likely collected and erupted along with the magma flowing through the newly injected dykes. Clinopyroxene mineral orientation - as evidenced by EBSD and micro X-ray tomography investigations - displays a marked pure-shear component, supporting the interpretation of the role of compaction in the generation of the pyroxenites. Conversely, gabbro sequences underwent minor melt extraction and are believed to represent crystallised coalesced magma batches emplaced at lower rates at the end of eruptive cycles. Clinopyroxene orientations in gabbros record a simple shear component suggesting syn-magmatic deformation parallel to observed NNE-SSW trending shear zones induced by the regional tensional stress field. This emplacement model implies a crystallisation time of 1 to 5 years for individual dykes, consistent with PX1 emplacement over less than 0.5 My. A minimum amount of approximately 150 km(3) of magma is needed to generate the pluton, part of it having been erupted through the Central Volcanic Centre of Fuerteventura. If the regional extensional tectonic regime controls the PX1 feeder-zone initiation and overall geometry, rates and volumes of magma depend on other, source-related factors. High injection rates are likely to induce intrusion growth rates larger than could be accommodated by the regional extension. In this case, dyke intrusion by propagation of a weak tip, combined with the inability of magma to circulate through previously emplaced and crystallised dykes could result in an increase of non-lithostatic pressure on previously emplaced mushy dyke walls; thus generating strong pure-shear compaction within the pluton feeder-zone and interstitial melt expulsion. These compaction-dominated processes are recorded by the cumulitic pyroxenite bands. (C) 2010 Elsevier B.V. All rights reserved.

Neurolysis using a carbohydrate polymer gel for the treatment of postoperative neuropathic pain.

Perineural and intraneural fibrosis is thought to be the main cause of failure of the many surgical treatments of neuropathic pain. We have used Adcon-T/N carbohydrate polymer gel for prevention of perineural fibrosis in several parts of the body. In this retrospective study, 54 patients who presented with postoperative neuropathic pain had microsurgical epineural neurolysis and relocation of a terminal neuroma. In 19 of them, the carbohydrate gel was applied at the same time. The mean follow-up was four years and the nerve distribution varied. Postoperative improvement in pain scores (visual analogue scale (VAS) and neuropathic pain scale inventory (NPSI)), sensitivity, overall improvement and satisfaction were equivalent in the two groups, with pain relief in about 80% of the patients. There was no significant beneficial effect in the carbohydrate gel group. Patients treated with this device had a higher infection rate (21 compared with 0, p = 0.01) and delayed wound healing (31.6 compared with 11.8, p = 0.2). We conclude that good long-term pain relief is obtained postoperatively independently of the addition of carbohydrate gel. There was a slight but not significant trend towards profound pain relief with the gel.

Pizgrischite, (Cu,Fe)Cu14PbBi17S35, a new sulfosalt from the Swiss Alps: Description, crystal structure and occurrence

Pizgrischite, (Cu,Fe)Cu14PbBi17S35, is a new mineral species named after the type locality, Piz Grisch Mountain, Val Ferrera, Graubunden, Switzerland. This sulfosalt occurs as thin, striated, metallic lead-grey blades measuring up to I cm in length, embedded in quartz and associated with tetrahedrite, chalcopyrite, pyrite, sphalerite, emplectite and derivatives of the aikinite-bismuthinite series. In plane-polarized light, the new species is brownish grey with no perceptible pleochroism; under crossed nicols in oil immersion, it presents a weak anisotropy with dark brown tints. Minimum and maximum reflectance values (in %) in air are: 40.7-42.15 (470 nm), 41.2-43.1 (546 nm), 41.2-43.35 (589 nm) and 40.7-43.3 (650 nm). Cleavage is perfect along 001 I and well developed on {010}. Abundant polysynthetic twinning is observed on (010). The mean micro-indentation hardness is 190 kg/mm(2) (Mohs hardness 3.3), and the calculated density is 6.58 g/cm(3). Electron-microprobe analyses yield (wt%; mean result of seven analyses): Cu 16.48, Pb 2.10, Fe 0.77, Bi 60.70, Sb 0.35, S 19.16, Se 0.04, total 99.60. The resulting empirical chemical formula is (Cu15.24Fe0.80Pb0.60)(Sigma 16.64)(Bi17.07Sb0.17)(Sigma 17.24)(S35.09Se0.03)(Sigma 35.12), in accordance with the formula derived from the single-crystal refinement of the structure, (Cu,Fe)Cu14PbBi17S35. Pizgrischite is monoclinic, space group C2/m, with the following unit-cell parameters: a 35.054(2), b3.91123(I), c43.192(2) angstrom, beta 96.713(4)degrees, V5881.24 angstrom(3), Z=4. The strongest seven X-ray powder-diffraction lines [d in angstrom (I)(hkl)] are: 5.364(40)((6) over bar 04), 4.080(50)((8) over bar 05), 3.120(40)(118), 3.104(68)((3) over bar 18), 2.759(53) ((9) over bar 11),2.752(44)(910) and 1.956(100)(020). The crystal structure is an expanded monoclinic derivative of kupcikite. Pizgrischite belongs to the cuprobismutite series of bismuth sulfosalts but, sensu stricto, it is not a homologue of cuprobismutite. At the type locality. pizarischite is the result of the Alpine metamorphism under greenschist-facies conditions of pre-Tertiary hydrothermal Cu-Bi mineralization.

Quantification of clenbuterol at trace level in human urine by ultra-high pressure liquid chromatography-tandem mass spectrometry.

Clenbuterol is a β2 agonist agent with anabolic properties given by the increase in the muscular mass in parallel to the decrease of the body fat. For this reason, the use of clenbuterol is forbidden by the World Anti-Doping Agency (WADA) in the practice of sport. This compound is of particular interest for anti-doping authorities and WADA-accredited laboratories due to the recent reporting of risk of unintentional doping following the eating of meat contaminated with traces of clenbuterol in some countries. In this work, the development and the validation of an ultra-high pressure liquid chromatography coupled to electrospray ionization tandem mass spectrometry (UHPLC-ESI-MS/MS) method for the quantification of clenbuterol in human urine is described. The analyte was extracted from urine samples by liquid-liquid extraction (LLE) in basic conditions using tert butyl-methyl ether (TBME) and analyzed by UHPLC-MS/MS with a linear gradient of acetonitrile in 9min only. The simple and rapid method presented here was validated in compliance with authority guidelines and showed a limit of quantification at 5pg/mL and a linearity range from 5pg/mL to 300pg/mL. Good trueness (85.8-105%), repeatability (5.7-10.6% RSD) and intermediate precision (5.9-14.9% RSD) results were obtained. The method was then applied to real samples from eighteen volunteers collecting urines after single oral doses administration (1, 5 and 10μg) of clenbuterol-enriched yogurts.

Rapid high-performance liquid chromatographic determination with fluorescence detection of furosemide in human body fluids and its confirmation by gas chromatography-mass spectrometry.

Furosemide (FD: Lasix) is a loop diuretic which strongly increases both urine flow and electrolyte urinary excretion. Healthy volunteers were administered 40 mg orally (dissolved in water) and concentrations of FD were determined in serum and urine for up to 6 h for eight subjects, who absorbed water at a rate of 400 ml/h. Quantification was performed by HPLC with fluorescence detection (excitation at 233 nm, emission at 389 nm) with a limit of detection of 5 ng/ml for a 300-microliters sample. The elution of FD was completed within 4 min using a gradient of acetonitrile concentration rising from 30 to 50% in 0.08 M phosphoric acid. The delay to the peak serum concentration ranged from 60 to 120 min. FD was still easily measurable in the sera from all subjects 6 h after administration. In urine, the excretion rates reached their maximum between 1 and 3 h. The total amount of FD excreted in the urine averaged 11.2 mg (range 7.6-14.0 mg), with a mean urine volume of 3024 ml (range 2620-3596 ml). Moreover, the urine density was lower than 1.010 (recommended as an upper limit in doping analysis to screen diuretics) only for 2 h. An additional volunteer was administered 40 mg of FD and his urine was collected over a longer period. FD was still detectable 48 h after intake. Gas chromatography-mass spectrometry with different types of ionization was used to confirm the occurrence of FD after permethylation of the extract. Negative-ion chemical ionization, with ammonia as reactant gas, was found to be the most sensitive method of detection.

Rhinitis due to acrylates : case report

Background: Acrylates and methacrylates (salts and esters of acrylic and metacrylic acid respectively), are monomers commonly found in polymer plastics, resins and glues, and are widely used in many industry sectors. The first adverse health effects described were skin reactions and asthma. Exposure to acrylates, for instance when using multicomponent glues, is now a well known cause of occupational asthma. Methods: We report the case of a rhinitis - and possible asthma - to acrylates, in a 38-year-old woman, working in a nail beauty salon. She was currently treated for hypertension, and otherwise known for obesity and seasonal rhinoconjunctivitis, but did not have any respiratory problem. Two years after starting this activity, she progressively started to complain of anosmia, rhinitis, and intermittent dyspnea. Her job consisted in decorating nails with a mixture of a polymer powder and a liquid monomer, after removing the previous artificial nail with a small sander. We assessed exposure to acrylates at her working place, both as dust (from sanded nails) and volatile compound (from the mixture described above), and she was asked to measure her peak flow values twice a day for ten days, in order to detect a possible relationship between her occupational activities, the symptoms and the peak flow values. Results: Measures made during the visit of the patient's place of work showed that the existing aspiration system was efficient for eliminating the dust produced by nail sanding, but not for eliminating the volatile components. Thus, occupational exposure to acrylates was demonstrated. Moreover, the peak flow measures showed an average decrease of almost 10 percent when the patient was at work, compared to when she stayed home. We concluded that she actually suffered from professional rhinitis and, possibly, professional asthma (not certain because of the limited number of peak flow measures per day). Conclusion: Although exposure to acrylates is a well known cause of occupational asthma, it should be emphasized that the exact mechanisms of action remain unknown, despite the abundant literature about it. Some professions, which tend to be more frequent nowadays (such as working in a nail beauty salon), can expose the worker to particular risks. This highlights the need of always inquiring not only about the profession, but also the related activities, when facing a case of suspected asthma.

Multiplex ultra-performance liquid chromatography-tandem mass spectrometry method for simultaneous quantification in human plasma of fluconazole, itraconazole, hydroxyitraconazole, posaconazole, voriconazole, voriconazole-N-oxide, anidulafungin, and caspofungin.

Therapeutic drug monitoring (TDM) may contribute to optimizing the efficacy and safety of antifungal therapy because of the large variability in drug pharmacokinetics. Rapid, sensitive, and selective laboratory methods are needed for efficient TDM. Quantification of several antifungals in a single analytical run may best fulfill these requirements. We therefore developed a multiplex ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) method requiring 100 μl of plasma for simultaneous quantification within 7 min of fluconazole, itraconazole, hydroxyitraconazole, posaconazole, voriconazole, voriconazole-N-oxide, caspofungin, and anidulafungin. Protein precipitation with acetonitrile was used in a single extraction procedure for eight analytes. After reverse-phase chromatographic separation, antifungals were quantified by electrospray ionization-triple-quadrupole mass spectrometry by selected reaction monitoring detection using the positive mode. Deuterated isotopic compounds of azole antifungals were used as internal standards. The method was validated based on FDA recommendations, including assessment of extraction yields, matrix effect variability (<9.2%), and analytical recovery (80.1 to 107%). The method is sensitive (lower limits of azole quantification, 0.01 to 0.1 μg/ml; those of echinocandin quantification, 0.06 to 0.1 μg/ml), accurate (intra- and interassay biases of -9.9 to +5% and -4.0 to +8.8%, respectively), and precise (intra- and interassay coefficients of variation of 1.2 to 11.1% and 1.2 to 8.9%, respectively) over clinical concentration ranges (upper limits of quantification, 5 to 50 μg/ml). Thus, we developed a simple, rapid, and robust multiplex UPLC-MS/MS assay for simultaneous quantification of plasma concentrations of six antifungals and two metabolites. This offers, by optimized and cost-effective lab resource utilization, an efficient tool for daily routine TDM aimed at maximizing the real-time efficacy and safety of different recommended single-drug antifungal regimens and combination salvage therapies, as well as a tool for clinical research.

MSight: an image analysis software for liquid chromatography-mass spectrometry.

Images obtained from high-throughput mass spectrometry (MS) contain information that remains hidden when looking at a single spectrum at a time. Image processing of liquid chromatography-MS datasets can be extremely useful for quality control, experimental monitoring and knowledge extraction. The importance of imaging in differential analysis of proteomic experiments has already been established through two-dimensional gels and can now be foreseen with MS images. We present MSight, a new software designed to construct and manipulate MS images, as well as to facilitate their analysis and comparison.

On the use of reporter bacteria for measuring availability of organic contaminants

Natural environments are constantly challenged by the release of hydrophobic organic contaminants, which represent a threat for both the ecosystem and human health. Despite a substantial degradation by naturally occurring micro-organisms, a non negligible fraction of these pollutants tend to persist in soil and sediments due to their reduced accessibility to microbial degraders. This lack of 'bioavailability' is acknowledged as a key parameter for the natural and stimulated clean-up (bioremediation) of contaminated sites. We developed a bacterial bioreporter that responds to the presence of polyaromatic hydrocarbons (PAHs) by the production of the green fluorescent protein (GFP), based on the PAH-degrading bacterium Burkholderia sartisoli. We showed in this study that the bacterial biosensor B. sartisoli strain RP037 was faithfully reporting the degradation of naphthalene and phenanthrene (two PAHs of low molecular weight) via the production of GFP. What is more, the magnitude of GFP induction was influenced by change in the PAH flux triggered by a variety of physico-chemical parameters, such as the contact surface between the pollutant and the aqueous suspension. Further experiments permitted to test the influence of dissolved organic matter, which is an important component of natural habitats and can interact with organic pollutants. In addition, we tested the influence of two types of biosurfactants (tensio-active agents produced by living organisms) on phenanthrene's degradation by RP037. Interestingly, the surfactant's effects on the biodegradation rate appeared to depend on the type of biosurfactant and probably on the type of bacterial strain. Finally, we tagged B. sartisoli strain RP037 with a constitutively expressed mCherry fluorescent protein. The presence of mCherry allowed us to visualize the bacteria in complex samples even when GFP production was not induced. The new strain RP037-mChe embedded in a gel patch was used to detect PAH fluxes from a point source, such as a non-aqueous liquid or particles of contaminated soil. In parallel, we also developed and tested a so-called multiwell bacterial biosensor platform, which permitted the simultaneous use of four different reporter strains for the detection of major crude oil components (e.g., saturated hydrocarbons, mono- and polyaromatics) in aqueous samples. We specifically constructed the strain B. sartisoli RP007 (pPROBE-phn-luxAB) for the detection of naphthalene and phenanthrene. It was equipped with a reporter plasmid similar to the one in strain RP037, except that the gfp gene was replaced by the genes luxAB, which encoded the bacterial luciferase. The strain was implemented in the biosensor platform and detected an equivalent naphthalene concentration in oil spilled-sea water. We also cloned the gene for the transcriptional activator AlkS and the operator/promoter region of the operon alkSB1GHJ from the alkane-degrader bacterium Alcanivorax borkumensis strain SK2 in order to construct a new bacterial biosensor with higher sensitivity towards long-chain alkanes. However, the resulting strain showed no increased light emission in presence of tetradecane (C14), while it still efficiently reported low concentrations of octane (C8). RÉSUMÉ : Les écosystèmes naturels sont constamment exposés à nombre de contaminants organiques hydrophobes (COHs) d'origine industrielle, agricole ou même naturelle. Les COHs menacent à la fois l'environnement, le bien-être des espèces animales et végétales et la santé humaine, mais ils peuvent être dégradés par des micro-organismes tels que les bactéries et les champignons, qui peuvent être capables des les transformer en produits inoffensifs comme le gaz carbonique et l'eau. La biodégradation des COHs est cependant fréquemment limitée par leur pauvre disponibilité envers les organismes qui les dégradent. Ainsi, bien que la biodégradation opère partiellement, les COHs persistent dans l'environnement à de faibles concentrations qui potentiellement peuvent encore causer des effets toxiques chroniques. Puisque la plupart des COHs peuvent être métabolisés par l'activité microbienne, leur persistance a généralement pour origine des contraintes physico-chimiques plutôt que biologiques. Par exemple, leur solubilité dans l'eau très limitée réduit leur prise par des consommateurs potentiels. De plus, l'adsorption à la matière organique et la séquestration dans les micropores du sol participent à réduire leur disponibilité envers les microbes. Les processus de biodisponibilité, c'est-à-dire les processus qui gouvernent la dissolution et la prise de polluants par les organismes vivants, sont généralement perçus comme des paramètres clés pour la dépollution (bioremédiation) naturelle et stimulée des sites contaminés. Les hydrocarbures aromatiques polycycliques (HAPs) sont un modèle de COH produits par les activités aussi bien humaines que naturelles, et listés comme des contaminants chroniques de l'air, des sols et des sédiments. Ils peuvent être dégradés par un vaste nombre d'espèces bactériennes mais leur taux de biodégradation est souvent limité par les contraintes mentionnées ci-dessus. Afin de comprendre les processus de biodisponibilité pour les cellules bactériennes, nous avons décidé d'utiliser les bactéries elles-mêmes pour détecter et rapporter les flux de COH. Ceci a été réalisé par l'application d'une stratégie de conception visant à produire des bactéries `biocapteurs-rapporteurs', qui littéralement s'allument lorsqu'elles détectent un composé cible pour lequel elles ont été conçues. En premier lieu, nous nous sommes concentrés sur Burkholderia sartisoli (souche RP007), une bactérie isolée du sol et consommatrice de HAP .Cette souche a servi de base à la construction d'un circuit génétique permettant la formation de la protéine autofluorescente GFP dès que les cellules détectent le naphtalène ou le phénanthrène, deux HAP de faible masse moléculaire. En effet, nous avons pu montrer que la bactérie obtenue, la souche RP037 de B. sartisoli, produit une fluorescence GFP grandissante lors d'une exposition en culture liquide à du phénanthrène sous forme cristalline (0.5 mg par ml de milieu de culture). Nous avons découvert que pour une induction optimale il était nécessaire de fournir aux cellules une source additionnelle de carbone sous la forme d'acétate, ou sinon seul un nombre limité de cellules deviennent induites. Malgré cela, le phénanthrène a induit une réponse très hétérogène au sein de la population de cellules, avec quelques cellules pauvrement induites tandis que d'autres l'étaient très fortement. La raison de cette hétérogénéité extrême, même dans des cultures liquides mélangées, reste pour le moment incertaine. Plus important, nous avons pu montrer que l'amplitude de l'induction de GFP dépendait de paramètres physiques affectant le flux de phénanthrène aux cellules, tels que : la surface de contact entre le phénanthrène solide et la phase aqueuse ; l'ajout de surfactant ; le scellement de phénanthrène à l'intérieur de billes de polymères (Model Polymer Release System) ; la dissolution du phénanthrène dans un fluide gras immiscible à l'eau. Nous en avons conclu que la souche RP037 détecte convenablement des flux de phénantrène et nous avons proposé une relation entre le transfert de masse de phénanthrène et la production de GFP. Nous avons par la suite utilisé la souche afin d'examiner l'effet de plusieurs paramètres chimiques connus dans la littérature pour influencer la biodisponibilité des HAP. Premièrement, les acides humiques. Quelques rapports font état que la disponibilité des HAP pourrait être augmentée par la présence de matière organique dissoute. Nous avons mesuré l'induction de GFP comme fonction de l'exposition des cellules RP037 au phénanthrène ou au naphtalène en présence ou absence d'acides humiques dans la culture. Nous avons testé des concentrations d'acides humiques de 0.1 et 10 mg/L, tandis que le phénanthrène était ajouté via l'heptamethylnonane (HMN), un liquide non aqueux, ce qui au préalable avait produit le plus haut flux constant de phénanthrène aux cellules. De plus, nous avons utilisé des tests en phase gazeuse avec des concentrations d'acides humiques de 0.1, 10 et 1000 mg/L mais avec du naphtalène. Contrairement à ce que décrit la littérature, nos résultats ont indiqué que dans ces conditions l'expression de GFP en fonction de l'exposition au phénanthrène dans des cultures en croissance de la souche RP037 n'était pas modifiée par la présence d'acides humiques. D'un autre côté, le test en phase gazeuse avec du naphtalène a montré que 1000 mg/L d'acides humiques abaissent légèrement mais significativement la production de GFP dans les cellules de RP037. Nous avons conclu qu'il n'y a pas d'effet général des acides humiques sur la disponibilité des HAP pour les bactéries. Par la suite, nous nous sommes demandé si des biosurfactants modifieraient la disponibilité du phénanthrène pour les bactéries. Les surfactants sont souvent décrits dans la littérature comme des moyens d'accroître la biodisponibilité des COHs. Les surfactants sont des agents tensio-actifs qui augmentent la solubilité apparente de COH en les dissolvant à l'intérieur de micelles. Nous avons ainsi testé si des biosurfactants (des surfactants produits par des organismes vivants) peuvent être utilisé pour augmenter la biodisponibilité du phénanthrène pour la souche B. sartisoli RP037. Premièrement, nous avons tenté d'obtenir des biosurfactants produits par une autre bactérie vivant en co-culture avec les biocapteurs bactériens. Deuxièmement, nous avons utilisé des biosurfactants purifiés. La co-cultivation en présence de la bactérie productrice de lipopeptide Pseudomonas putida souche PCL1445 a augmenté l'expression de GFP induite par le phénanthrène chez B. sartisoli en comparaison des cultures simples, mais cet effet n'était pas significativement différent lorsque la souche RP037 était co-cultivée avec un mutant de P. putida ne produisant pas de lipopeptides. L'ajout de lipopeptides partiellement purifiés dans la culture de RP037 a résulté en une réduction de la tension de surface, mais n'a pas provoqué de changement dans l'expression de GFP. D'un autre côté, l'ajout d'une solution commerciale de rhamnolipides (un autre type de biosurfactants produits par Pseudomonas spp.) a facilité la dégradation du phénanthrène par la souche RP037 et induit une expression de GFP élevée dans une plus grande proportion de cellules. Nous avons ainsi conclu que les effets des biosurfactants sont mesurables à l'aide de la souche biocapteur, mais que ceux-ci sont dépendants du type de surfactant utilisé conjointement avec le phénanthrène. La question suivante que nous avons abordée était si les tests utilisant des biocapteurs peuvent être améliorés de manière à ce que les flux de HAP provenant de matériel contaminé soient détectés. Les tests en milieu liquide avec des échantillons de sol ne fournissant pas de mesures, et sachant que les concentrations de HAP dans l'eau sont en général extrêmement basses, nous avons conçu des tests de diffusion dans lesquels nous pouvons étudier l'induction par les HAPs en fonction de la distance aux cellules. Le biocapteur bactérien B. sartisoli souche RP037 a été marqué avec une seconde protéine fluorescente (mCherry), qui est constitutivement exprimée dans les cellules et leur confère une fluorescence rouge/rose. La souche résultante RP037-mChe témoigne d'une fluorescence rouge constitutive mais n'induit la fluorescence verte qu'en présence de naphtalène ou de phénanthrène. La présence d'un marqueur fluorescent constitutif nous permet de visualiser les biocapteurs bactériens plus facilement parmi des particules de sol. Un test de diffusion a été conçu en préparant un gel fait d'une suspension de cellules mélangées à 0.5 % d'agarose. Des bandes de gel de dimensions 0.5 x 2 cm x 1 mm ont été montées dans des chambres d'incubation et exposées à des sources de HAP (soit dissouts dans du HMN ou en tant que matériel solide, puis appliqués à une extrémité de la bande). En utilisant ce montage expérimental, le naphtalène ou le phénanthrène (dissouts dans du HMN à une concentration de 2.5 µg/µl) ont induit un gradient d'intensité de fluorescence GFP après 24 heures d'incubation, tandis que la fluorescence mCherry demeurait comparable. Un sol contaminé par des HAPs (provenant d'un ancien site de production de gaz) a induit la production de GFP à un niveau comparable à celui du naphtalène. Des biocapteurs bactériens individuels ont également détecté un flux de phénanthrène dans un gel contenant des particules de sol amendées avec 1 et 10 mg/g de phénanthrène. Ceci a montré que le test de diffusion peut être utilisé pour mesurer des flux de HAP provenant de matériel contaminé. D'un autre côté, la sensibilité est encore très basse pour plusieurs sols contaminés, et l'autofluorescence de certains échantillons rend difficile l'identification de la réponse de la GFP chez les cellules. Pour terminer, un des points majeurs de ce travail a été la production et la validation d'une plateforme multi-puits de biocapteurs bactériens, qui a permis l'emploi simultané de plusieurs souches différentes de biocapteurs pour la détection des constituants principaux du pétrole. Pour cela nous avons choisi les alcanes linéaires, les composés mono-aromatiques, les biphényls et les composés poly-aromatiques. De plus, nous avons utilisé un capteur pour la génotoxicité afin de détecter la `toxicité globale' dans des échantillons aqueux. Plusieurs efforts d'ingénierie ont été investis de manière à compléter ce set. En premier lieu, chaque souche a été équipée avec soit gfp, soit luxAB en tant que signal rapporteur. Deuxièmement, puisqu'aucune souche de biocapteur n'était disponible pour les HAP ou pour les alcanes à longues chaînes, nous avons spécifiquement construit deux nouveaux biocapteurs. L'un d'eux est également basé sur B. sartisoli RP007, que nous avons équipé avec le plasmide pPROBE-phn-luxAB pour la détection du naphtalène et du phénanthrène mais avec production de luciférase bactérienne. Un autre est un nouveau biocapteur bactérien pour les alcanes. Bien que nous possédions une souche Escherichia coli DHS α (pGEc74, pJAMA7) détectant les alcanes courts de manière satisfaisante, la présence des alcanes à longues chaînes n'était pas rapportée efficacement. Nous avons cloné le gène de l'activateur transcriptionnel A1kS ainsi que la région opérateur/promoteur de l'opéron alkSB1GHJ chez la bactérie dégradant les alcanes Alcanivorax borkumensis souche SK2, afin de construire un nouveau biocapteur bactérien bénéficiant d'une sensibilité accrue envers les alcanes à longues chaînes. Cependant, la souche résultante E. coli DHSα (pAlk3} n'a pas montré d'émission de lumière augmentée en présence de tétradécane (C14), tandis qu'elle rapportait toujours efficacement de basses concentrations d'octane (C8). De manière surprenante, l'utilisation de A. borkumensis en tant que souche hôte pour le nouveau plasmide rapporteur basé sur la GFP a totalement supprimé la sensibilité pour l'octane, tandis que la détection de tétradécane n'était pas accrue. Cet aspect devra être résolu dans de futurs travaux. Pour calibrer la plateforme de biocapteurs, nous avons simulé une fuite de pétrole en mer dans une bouteille en verre ouverte de 5L contenant 2L d'eau de mer contaminée avec 20 ml (1%) de pétrole brut. La phase aqueuse a été échantillonée à intervalles réguliers après la fuite durant une période allant jusqu'à une semaine tandis que les principaux contaminants pétroliers étaient mesurés via les biocapteurs. L'émission de bioluminescence a été mesurée de manière à déterminer la réponse des biocapteurs et une calibration intégrée faite avec des inducteurs types a servi à calculer des concentrations d'équivalents inducteurs dans l'échantillon. E. coli a été utilisée en tant que souche hôte pour la plupart des spécificités des biocapteurs, à l'exception de la détection du naphtalène et du phénanthrène pour lesquels nous avons utilisé B. sartisoli. Cette souche, cependant, peut être employée plus ou moins selon la même procédure. Il est intéressant de noter que le pétrole répandu a produit une apparition séquentielle de composés dissouts dans la phase aqueuse, ceux-ci .étant détectables par les biocapteurs. Ce profil contenait d'abord les alcanes à courtes chaînes et les BTEX (c'est-à dire benzène, toluène, éthylbenzène et xylènes), apparaissant entre des minutes et des heures après que le pétrole a été versé. Leurs concentrations aqueuses ont par la suite fortement décru dans l'eau échantillonnée après 24 heures, à cause de la volatilisation ou de la biodégradation. Après quelques jours d'incubation, ces composés sont devenus indétectables. Les HAPs, en revanche, sont apparus plus tard que les alcanes et les BTEX, et leur concentration a augmenté de pair avec un temps d'incubation prolongé. Aucun signal significatif n'a été mis en évidence avec le biocapteur pour le biphényl ou pour la génotoxicité. Ceci démontre l'utilité de ces biocapteurs, spécifiquement pour la détection des composés pétroliers, comprenant les alcanes à courtes chaînes, les BTEX et les HAPs légers.

Capsule permeability via polymer and protein ingress/egress.

Static incubation tests, where microcapsules and beads are contacted with polymer and protein solutions, have been developed for the characterization of permselective materials applied for bioartificial organs and drug delivery. A combination of polymer ingress, detected by size-exclusion chromatography, and protein ingress/ egress, assessed by gel electrophoresis, provides information regarding the diffusion kinetics, molar mass cutoff(MMCO) and permeability. This represents an improvement over existing permeability measurements that are based on the diffusion of a single type of solute. Specifically, the permeability of capsules based on alginate, cellulose sulfate, polymethylene-co-guanidine were characterized as a function of membrane thickness. Solid alginate beads were also evaluated. The MMCO of these capsules was estimated to be between 80 and 90 kDa using polymers, and between 116-150 kDa with proteins. Apparently, the globular shape of the proteins (radius of gyration (Rg) of 4.2-4.6 nm) facilitates their passage through the membrane, comparatively to the polysaccharide coil conformation (Rg of 6.5-8.3 nm). An increase of the capsule membrane thickness reduced these values. The MMCO of the beads, which do not have a membrane limiting their permselective properties, was higher, between 110 and 200 kDa with dextrans, and between 150 and 220 kDa with proteins. Therefore, although the permeability estimated with biologically relevant molecules is generally higher due to their lower radius of gyration, both the MMCO of synthetic and natural watersoluble polymers correlate well, and can be used as in vitro metrics for the immune protection ability of microcapsules and microbeads. This article shows, to the authors' knowledge, the first reported concordance between permeability measures based on model natural and biological macromolecules.

Biochemical, immunological and toxicological characteristics of the crystal proteins of Bacillus thuringiensis subsp. medellin

Characterization of the insecticidal and hemolytic activity of solubilized crystal proteins of Bacillus thuringiensis (Bt) subsp. medellin (Btmed) was performed and compared to solubilized crystal proteins of isolates 1884 of B. thuringiensis subsp. israelensis (Bti) and isolate PG-14 of B. thuringiensis subsp. morrisoni (Btm). In general, at acid pH values solubilization of the Bt crystalline parasporal inclusions (CPI) was lower than at alkaline pH. The larvicidal activity demonstrated by the CPI of Btmed indicated that optimal solubilization of CPI takes place at a pH value of 11.3, in Bti at pH values from 5.03 to 11.3 and in Btm at pH values from 9.05 to 11.3. Hemolytic activity against sheep red blood cells was mainly found following extraction at pH 11.3 in all Bt strains tested. Polyacrylamide gel electrophoresis under denaturing conditions revealed that optimal solubilization of the CPI in all Bt strains takes place at the alkaline pH values from 9.05 to 11.3. An enriched preparation of Btmed crystals was obtained, solubilized and crystal proteins were separated on a size exclusion column (Sephacryl S-200). Three main protein peaks were observed on the chromatogram. The first peak had two main proteins that migrate between 90 to 100 kDa. These proteins are apparently not common to other Bt strains isolated to date. The second and third peaks obtained from the size exclusion column yielded polypeptides of 68 and 28-30 kDa, respectively. Each peak independently, showed toxicity against 1st instar Culex quinquefasciatus larvae. Interestingly, combinations of the fractions corresponding to the 68 and 30 kDa protein showed an increased toxicity. These results suggest that the 94 kDa protein is an important component of the Btmed toxins with the highest potency to kill mosquito larvae. When crystal proteins of Bti were probed with antisera raised independently against the three main protein fractions of Btmed, the only crystal protein that showed cross reaction was the 28 kDa protein. These data suggest that Btmed could be an alternative bacterium for mosquito control programs in case mosquito larval resistance emerges to Bti toxic proteins.

Experimental calcium oxalate crystal production and dissolution by selected wood rot fungi.

Twenty-six species of white-rotting Agaricomycotina fungi (Basidiomycota) were screened for their ability to produce calcium-oxalate (CaOx) crystals in vitro. Most were able to produce CaOx crystals in malt agar medium in the absence of additional calcium. In the same medium enriched with Ca2+, all the species produced CaOx crystals (weddellite or whewellite). Hyphae of four species (Ganoderma lucidum, Polyporus ciliatus, Pycnoporus cinnabarinus, and Trametes versicolor) were found coated with crystals (weddellite/whewellite). The production of CaOx crystals during the growth phase was confirmed by an investigation of the production kinetics for six of the species considered in the initial screening (Pleurotus citrinopileatus, Pleurotus eryngii, Pleurotus ostreatus, P. cinnabarinus, Trametes suaveolens, and T. versicolor). However, the crystals produced during the growth phase disappeared from the medium over time in four of the six species (P. citrinopileatus, P. eryngii, P. cinnabarinus, and T. suaveolens). For P. cinnabarinus, the disappearance of the crystals was correlated with a decrease in the total oxalate concentration measured in the medium from 0.65 μg mm−2 (at the maximum accumulation rate) to 0.30 μg mm−2. The decrease in the CaOx concentration was correlated with a change in mycelia morphology. The oxalate dissolution capability of all the species was also tested in a medium containing calcium oxalate as the sole source of carbon (modified Schlegel medium). Three species (Agaricus blazei, Pleurotus tuberregium, and P. ciliatus) presented a dissolution halo around the growth zone. This study shows that CaOx crystal production is a widespread phenomenon in white-rot fungi, and that an excess of Ca2+ can enhance CaOx crystal production. In addition, it shows that some white-rot fungal species are capable of dissolving CaOx crystals after growth has ceased. These results highlight a diversity of responses around the production or dissolution of calcium oxalate in white-rot fungi and reveal an unexpected potential importance of fungi on the oxalate cycle in the environment.