Impact of N on the atomic-scale Sb distribution in quaternary GaAsSbN-capped InAs quantum dots

The use of GaAsSbN capping layers on InAs/GaAs quantum dots (QDs) has recently been proposed for micro- and optoelectronic applications for their ability to independently tailor electron and hole confinement potentials. However, there is a lack of knowledge about the structural and compositional changes associated with the process of simultaneous Sb and N incorporation. In the present work, we have characterized using transmission electron microscopy techniques the effects of adding N in the GaAsSb/InAs/GaAs QD system. Firstly, strain maps of the regions away from the InAs QDs had revealed a huge reduction of the strain fields with the N incorporation but a higher inhomogeneity, which points to a composition modulation enhancement with the presence of Sb-rich and Sb-poor regions in the range of a few nanometers. On the other hand, the average strain in the QDs and surroundings is also similar in both cases. It could be explained by the accumulation of Sb above the QDs, compensating the tensile strain induced by the N incorporation together with an In-Ga intermixing inhibition. Indeed, compositional maps of column resolution from aberration-corrected Z-contrast images confirmed that the addition of N enhances the preferential deposition of Sb above the InAs QD, giving rise to an undulation of the growth front. As an outcome, the strong redshift in the photoluminescence spectrum of the GaAsSbN sample cannot be attributed only to the N-related reduction of the conduction band offset but also to an enhancement of the effect of Sb on the QD band structure.

Optical absorption analysis of quaternary molybdate- and tungstate-ordered double perovskites

Quaternary-ordered double perovskite A2MM’O6 (M=Mo,W) semiconductors are a group of materials with a variety of photocatalytic and optoelectronic applications. An analysis focused on the optoelectronic properties is carried out using first-principles density-functional theory with several U orbital-dependent one-electron potentials applied to different orbital subspaces. The structural non-equivalence of the atoms resulting from the symmetry has been taken in account. In order to analyze optical absorption in these materials deeply, the absorption coefficients have been split into inter- and intra-non-equivalent species contributions. The results indicate that the effect of the A and M’ atoms on the optical properties are minimal whereas the largest contribution comes from the non-equivalent O atoms to M transitions.

A taxonomic tool for identifying needle remains of south-western European Pinus species of the Late Quaternary

Primer trabajo a nivel mundial sobre la diferenciación de especies de Pinus con clave dicotómica a través de la estructura cuticular

A taxonomic tool for identifying needle remains of south-western European Pinus species of the Late Quaternary

This work provides a tool whereby the needle remains of native, south-western European Pinus spp. can be easily identified from species-specific epidermal features. To construct this tool, the needles of P. uncinata, P. sylvestris, P. nigra, P. pinaster, P. pinea and P. halepensis were gathered across the Northern Hemisphere range of each taxon and compared with non-indigenous trees growing in two South Australian Botanic Gardens. Three needles from each of these species were taken from three adult trees growing at three different localities. Light microscopy was used to observe the key epidermal and stomatal features of the needles. To improve interpretation, additional scanning electron microscopy samples were prepared. Epidermal features, including variation in the diameter of the epistomatal chamber aperture (pore), are described. A taxonomic key based on the size, shape and arrangement of the subsidiary cells of the stomatal complexes was constructed. This key enables the identification of pine needle fragments at the species level (except those belonging to the group P. gr. nigra-uncinata). Despite their overlapping range, pore size was helpful in distinguishing between P. nigra and P. uncinata and between three groups of species. Isolated stomata were also observed. Cluster and discriminant analyses of stomatal variables described in earlier studies were performed. Overlap in guard cell variables hampers species-level identification of isolated stomata. Species discrimination is improved if groups of ecological affinity are considered.

Mio-Pliocene crustaceans from the Canary Islands, Spain

There are few previous references to fossil crustaceans for the Neogene marine layers of the Canary Islands (Spain). The Mio-Pliocene marine sedimentary layers in the eastern islands (Gran Canaria, Fuerteventura and Lanzarote) were previously characterised by the presence of numerous fossil fauna, mainly anthozoans and molluscs, which correspond to an equatorial-typepalaeoclimate, warmer than the present climate. This Mio-Pliocene transition dated between 9.3 and 4.1 Ma. In this paper, 12 fossil crustacean taxa are identified and classified, including decapods and barnacles: Balanus concavus Bronn, 1831, Balanus spongicola Brown, 1827, Balanus perforatus Bruguière, 1789, Chenolobia testudinaria Linnè, 1767, Tetraclita cf. rubescens Darwin, 1854, Callianassa matsoni Rathbun, 1935, Callianassa sp., Upogebia sp, Eriphia aff. verrucosa (Forskal, 1775) , Maja sp., Scylla michelini Milne-Edwards, 1861 and Ocypode sp. Some of these taxa mean new references for the Atlantic islands and the North African Atlantic and definitely enlarge the palaeographic distribution of Neogene crustaceans beyond the Mediterranean region, extending it to the North Atlantic. Particularly significant are the presence of Tetraclita cf. rubescens ,this being the first reported fossil occurrence of this barnacle outside the North America Pacific coasts, and Chenolobia testudinaria , indicating for the first time the existence of marine turtles in these islands during the Neogene. These results are coherent with previous research hypothesising the existence of a flow of surface water between the Pacific and Atlantic in the Mio-Pliocene transition (Central American Seaway, CAS) which explains the arrival of organisms, in larval stage, from Central America to the Canary Islands

More macrofossils are needed to successfully model late-quaternary vegetation

The need of more macrofossils to model late-quaternary vegetation is emphasized in the light of Iberian palaeobotanical data

Late Quaternary extinction of a tree species in eastern North America

Widespread species- and genus-level extinctions of mammals in North America and Europe occurred during the last deglaciation [16,000–9,000 yr B.P. (by 14C)], a period of rapid and often abrupt climatic and vegetational change. These extinctions are variously ascribed to environmental change and overkill by human hunters. By contrast, plant extinctions since the Middle Pleistocene are undocumented, suggesting that plant species have been able to respond to environmental changes of the past several glacial/interglacial cycles by migration. We provide evidence from morphological studies of fossil cones and anatomical studies of fossil needles that a now-extinct species of spruce (Picea critchfieldii sp. nov.) was widespread in eastern North America during the Last Glacial Maximum. P. critchfieldii was dominant in vegetation of the Lower Mississippi Valley, and extended at least as far east as western Georgia. P. critchfieldii disappeared during the last deglaciation, and its extinction is not directly attributable to human activities. Similarly widespread plant species may be at risk of extinction in the face of future climate change.

Contributions of distinct quaternary contacts to cooperative operator binding by Mnt repressor

Mnt, a tetrameric repressor encoded by bacteriophage P22, uses N-domain dimers to contact each half of its operator site. Experiments with a double mutant and structural homology with the P22 Arc repressor suggest that contacts made by Arg-28 and stabilized by Glu-33 are largely responsible for dimer–dimer cooperativity in Mnt. These dimer–dimer contacts are energetically more important for operator binding than solution tetramerization, which is mediated by an independent C-terminal coiled-coil domain. Indeed, once one dimer of the Mnt tetramer contacts an operator half site, binding of the second dimer occurs with an effective concentration much lower than that expected if both dimers were flexibly tethered. These results suggest that binding of the second dimer introduces some strain into the protein–DNA complex, a mechanism that could serve to limit the affinity of operator binding and to prevent strong binding of the Mnt tetramer to nonoperator sites.

High-resolution mapping of nucleoprotein complexes by site-specific protein-DNA photocrosslinking: organization of the human TBP-TFIIA-TFIIB-DNA quaternary complex.

We have used a novel site-specific protein-DNA photocrosslinking procedure to define the positions of polypeptide chains relative to promoter DNA in binary, ternary, and quaternary complexes containing human TATA-binding protein, human or yeast transcription factor IIA (TFIIA), human transcription factor IIB (TFIIB), and promoter DNA. The results indicate that TFIIA and TFIIB make more extensive interactions with promoter DNA than previously anticipated. TATA-binding protein, TFIIA, and TFIIB surround promoter DNA for two turns of DNA helix and thus may form a "cylindrical clamp" effectively topologically linked to promoter DNA. Our results have implications for the energetics, DNA-sequence-specificity, and pathway of assembly of eukaryotic transcription complexes.

Three quaternary structures for a single protein.

The structure of a multisubunit protein (immunoglobulin light chain) was solved in three crystal forms, differing only in the solvent of crystallization. The three structures were obtained at high ionic strength and low pH, high ionic strength and high pH, and low ionic strength and neutral pH. The three resulting "snapshots" of possible structures show that their variable-domain interactions differ, reflecting their stabilities under specific solvent conditions. In the three crystal forms, the variable domains had different rotational and translational relationships, whereas no alteration of the constant domains was found. The critical residues involved in the observed effect of the solvent are tryptophans and histidines located between the two variable domains in the dimeric structure. Tryptophan residues are commonly found in interfaces between proteins and their subunits, and histidines have been implicated in pH-dependent conformation changes. The quaternary structure observed for a multisubunit protein or protein complex in a crystal may be influenced by the interactions of the constituents within the molecule or complex and/or by crystal packing interactions. The comparison of buried surface areas and hydrogen bonds between the domains forming the molecule and between the molecules forming the crystals suggest that, for this system, the interactions within the molecule are most likely the determining factors.

Paleoenvironmental changes during the late Miocene (Messinian)–Pliocene transition (Bajo Segura Basin, southeastern Spain): sedimentological and ichnological evidence

A detailed sedimentological and paleontological analysis of the uppermost Miocene (Messinian)–Pliocene boundary at the northern border of the Bajo Segura Basin, southeastern Spain, was carried out in order to describe the evolution of the regional paleocoastline during the Pliocene reflooding of the Mediterranean immediately after the sea-level fall related to the Messinian Salinity Crisis. Multiple trace fossils typical of firm- and hardgrounds were recognized, allowing identification of Glossifungites (two different types), Entobia, and Gnathichnus ichnofacies. Trace-fossil analysis showed that lithology and media consistency exerted considerable control on the development of the different ichnocoenoses and that there was a clear decrease in hydrodynamic energy from a coastal to a shallow-water shelf environment related to progressive sea-level rise. Ichnological and sedimentological data provide evidence that the definitive flooding of the Mediterranean was rapid and synchronous throughout the northern margin of the Bajo Segura Basin. The following model for the Pliocene transgression in the study area is therefore proposed: (1) the marine ingression penetrated along the incised paleovalleys carved as a consequence of the fall in sea level, where the first two Pliocene systems were deposited (P0–P1); (2) during the maximum flooding surface of the transgression, the sea overflowed the margins of the paleovalleys and extended throughout the entire northern margin of the basin; and (3) the third Pliocene system was deposited, forming the lower part of a highstand systems tract (P2).

Quaternary ammonium-functionalized silica sorbents for the solid-phase extraction of aromatic amines under normal phase conditions

Quaternary ammonium-functionalized silica materials were synthesized and applied for solid-phase extraction (SPE) of aromatic amines, which are classified as priority pollutants by US Environmental Protection Agency. Hexamethylenetetramine used for silica surface modification for the first time was employed as SPE sorbent under normal phase conditions. Hexaminium-functionalized silica demonstrated excellent extraction efficiencies for o-toluidine, 4-ethylaniline and quinoline (recoveries 101–107%), while for N,N-dimethylaniline and N-isopropylaniline recoveries were from low to moderate (14–46%). In addition, the suitability of 1-alkyl-3-(propyl-3-sulfonate) imidazolium-functionalized silica as SPE sorbent was tested under normal phase conditions. The recoveries achieved for the five aromatic amines ranged from 89 to 99%. The stability of the sorbent was evaluated during and after 150 extractions. Coefficients of variation between 4.5 and 10.2% proved a high stability of the synthesized sorbent. Elution was carried out using acetonitrile in the case of hexaminium-functionalized silica and water for 1-alkyl-3-(propyl-3-sulfonate) imidazolium-functionalized silica sorbent. After the extraction the analytes were separated and detected by liquid chromatography ultraviolet detection (LC-UV). The retention mechanism of the materials was primarily based on polar hydrogen bonding and π–π interactions. Comparison made with activated silica proved the quaternary ammonium-functionalized materials to offer different selectivity and better extraction efficiencies for aromatic amines. Finally, 1-alkyl-3-(propyl-3-sulfonate) imidazolium-functionalized silica sorbent was successfully tested for the extraction of wastewater and soil samples.

Evolución tectónica del borde norte de la cuenca del Bajo Segura. Implicaciones en la evolución de la falla de Crevillente (sector Abanilla-Alicante)

En este estudio presentamos los resultados del análisis estructural del borde norte de la cuenca del Bajo Segura, en la cordillera Bética oriental. En este borde se desarrolla el sinclinal de Crevillente; se trata de un pliegue de propagación de falla con geometría de crecimiento y vergente al sur asociado a la falla de Crevillente (sector Abanilla-Alicante). El estudio cuantitativo de la discordancia progresiva asociada a dicho pliegue ha puesto de manifiesto que la actividad de esta falla se inició en el Tortoniense, aumentó durante el Messiniense y, a partir de ese momento se ha mantenido constante o ha disminuido durante el Plioceno y el Cuaternario. La escasez de depósitos cuaternarios deformados no implica que no exista actividad cuaternaria de la falla de Crevillente (sector Abanilla-Alicante), ya que la mayoría de los depósitos más recientes son discontinuos o se localizan al sur, alejados de la zona de máxima deformación. Por otro lado, el hecho de que la actividad de la falla del Bajo Segura, situada en el borde meridional de la cuenca, se iniciara durante el Plioceno, parece indicar una migración de la deformación hacia el sur.

Shear wave velocity estimation in the metropolitan area of Málaga (S Spain)

We carry out a seismic noise study based on array measurements at three sites in the Málaga basin, South Spain, for the further estimation of shear wave velocity profiles. For this purpose, we use both the H/V method and the f–k technique in order to characterize the different materials present in the zone, i.e., Quaternary sediments and Pliocene sedimentary rocks above the bedrock. The H/V analysis shows frequency peaks going from 1 Hz, in areas close to the border of the basin, to 0.3 Hz in places located toward the center of the formation. The f–k analysis allows obtaining the dispersion curves associated with each site and subsequently, estimating the Vs profiles by inversion of the respective group velocities. In this way, the basin basement can be characterized by S-wave velocities greater than 2000 m/s. Regarding the basin fill, it is divided into three layers defined by different wave velocity intervals. The shallowest one is featured by velocities ranging from 150 to 400 m/s and comprises the Quaternary sediments, while velocities going from 550–700 to1200–1600 m/s characterize the two underlying layers composed by Pliocene sediments. Finally, the information provided by the three Vs profiles is integrated in a 2D cross-section of the basin to have a spatial view of its sedimentary structure. The results obtained here, in addition to providing useful information about the infill of the basin near the metropolitan area of Málaga, will be very helpful for future seismic zonation studies in the region.

The Pliocene Mediterranean infilling of the Messinian Erosional Surface: New biostratigraphic data based on calcareous nannofossils (Bajo Segura Basin, SE Spain)

The Bajo Segura Basin (eastern Betic Cordillera) is a Mediterranean marginal basin where the Messinian Erosional Surface (MES), formed during the Messinian Salinity Crisis sea-level fall, is well developed. Overlying this major discontinuity the lower Pliocene transgressive sediments record the reflooding of the Mediterranean and the return to an open marine environment, the continental shelf being rebuilt after the Messinian erosion. The stratigraphic and biostratigraphic study of six sections allows two transgressive-regressive sequences filling the MES to be distinguished, correlated with the previously distinguished Mediterranean offshore seismic units. Ten calcareous nannofossil bioevents have been identified. The lower sequence can be dated according to nannofossil biozones NN12 to NN14 and the upper sequence by NN15 to NN16. The boundary between both lower Pliocene sedimentary sequences occur after the first common occurrence (FCO) of Discoaster asymmetricus found in the uppermost sediments of the lower sequence and before the first occurrence (FO) of Discoaster tamalis in the lowermost part of the upper sequence. Thus this sequence boundary can be estimated at between 4.1 and 4.0Ma ago.