Avaliação do perfil urinário de biomarcadores do stress oxidativo e a sua correlação com as doenças cardiovasculares

Com a realização deste trabalho pretendeu-se estabelecer o perfil urinário de níveis de biomarcadores do stress oxidativo (5-HMU; UAc; MDA; 8-OHdG) em indivíduos saudáveis (grupo controlo) comparando com o de doenças cardiovasculares (grupo CVD) de modo a avaliar o seu potencial como possíveis biomarcadores da possibilidade de ocorrência de CVD. A extração dos compostos alvos foi realizada por recurso a uma nova técnica extrativa - microextração com adsorvente empacotado em seringa (MEPS) controlada digitalmente (eVol). A análise dos biomarcadores foi efetuada por cromatografia líquida de ultra eficiência (UHPLC) utilizando como coluna analítica a HSS T3 (100 mm × 2,1 mm, 1,7 μm de tamanho da partícula) e com um sistema deteção de fotodiodos (PDA). Otimizaram-se os parâmetros experimentais com influência no processo extrativo, nomeadamente no que se refere ao tipo de adsorvente, á influência do pH, ao volume de amostra, ao número de ciclos extrativos, lavagem e ao volume de eluição. Foram ensaiadas diferentes condições experimentais e selecionadas as que corresponderam a uma maior eficiência extrativa, expressa pela área total relativa dos analitos e reprodutibilidade. Os melhores resultados foram obtidos usando como adsorvente C8, o pH da amostra ajustado a 6, o adsorvente foi carregado com 5x50 μL de amostra e a eluição com 1x50 μL de 0,01% ácido formico e 3x50 μL de 20% metanol. Para a separação cromatográfica dos analitos usou-se uma fase móvel binária (0,01% ácido fórmico:20% metanol), em modo isocrático e um fluxo de 250 μL min-1. O método analítico foi validado em termos de seletividade, linearidade, limite de deteção (LOD), limite de quantificação (LOQ), efeito matriz, exatidão e precisão (intra e interdias) e aplicada a determinação de biomarcadores alvo nos dois grupos estudados, obtiveram-se bons resultados em termos seletividade e linearidade (R2>0,9906), os valores de LOD e LOQ obtidos foram baixos, variando entre 0,00005 - 0,72 μg mL-1 e 0,00023 – 2,31 μg mL-1 respetivamente. Os resultados da percentagem de recuperação (91,06 – 123,02 %), precisão intra-dia (0,95 – 8,34 %), precisão inter-dia (4,58 -6,33 %) e o efeito de matriz (60,11 – 110,29 %) deste método foram satisfatórios. A aplicação da metodologia validada aos dois grupos em estudo permitiu concluir que as concentrações de UAc e MDA entre os dois grupos, contrariamente ao 5-HMU e ao 8- OhdG cujas concentrações são estatisticamente diferentes entre o grupo controlam e o grupo CVD.

Deteção e caracterização molecular das estirpes de Wolbachia nos afídeos

A Wolbachiapertence a um grupo de bactérias intracelulares, transmitidas maternalmente, que se encontram amplamente distribuídas nos artrópodes. Estes endossimbiontes encontram-se normalmente nos tecidos do sistema reprodutor dos artrópodes e têm a capacidade manipular a sua reproduçãode modo a garantir a sua transmissão à descendência e rápida dispersão na população.A capacidade de manipulação reprodutiva da Wolbachia tornou-a o alvo de diversos estudos para uma maior e melhor perceção da sua implicação em processos biológicos e evolutivos e por acreditar-se que esta bactéria é uma promissora ferramenta no controlo de populações de insetos que são pragas agrícolas. Os afídeos são um grupo de insetos associados às plantas que podem ter um efeito devastador nas culturas agrícolas e hortícolas pois não só retiram nutrientes às plantas como podem ser vetores de doenças. Embora durante muito tempo se pensasse que estes insetos não albergavam a Wolbachia estudos recentes mostram que são várias as espécies de afídeos infetados com esta bactéria. O principal objetivo deste trabalho é estudar a prevalência de infeção por Wolbachia assim como a caracterização das suas estirpes em amostras de afídeos dos Arquipélagos da Madeira e dos Açores. Neste estudo foram analisadas 545 amostras de afídeos, 361 provenientes do Arquipélago da Madeira e 184 dos Açores. Utilizando a técnica da “Polymerase Chain Reaction” (reação em cadeia da polimerase) amplificou-se o gene 16S rRNA (RNA ribossomal) e verificou-se que 32 destas amostras encontravam-se infetadas com Wolbachia sendo a maior parte das amostras infetadas provenientes dos Açores. Para determinar a estirpe que infeta estes afídeos utilizou-se a tipagem sequencial multilocus (MLST) com os genesglutamil-tRNA amidotransferase, subunidade B (gatB), citocromo c oxidase, subunidade I (coxA), proteína hipotética conservativa (hcpA) e proteína da divisão celular (ftsZ). A análise filogenética realizada para os diferentes genes mostrou que grande parte das amostras analisadas estão incluídas em dois dos novos supergrupos descobertos para Wolbachia, supergrupo M e N.Foi detetada a presença da mesma estirpe de Wolbachia, supergrupo N, em duas espécies diferentes de afídeos, Neophyllaphis podocarpi e Aphis spiraecola da mesma planta hospedeira, Podocarpus macrophyllus. Esta infeção reforça a ideia de que a Wolbachia não recorre só a transmissão vertical para se difundir na população mas utiliza também a transmissão horizontal. A deteção e caracterização das estirpes de Wolbachia é essencial para um maior entendimento sobre a sua origem e forma de disseminação. Esta informação é importante para desenvolvimento de estratégias de controlo de pestes recorrendo a estes endossimbiontes.

Estabelecimento da composição volátil do nutriente FNI 210 usado pela Ceratitis capitata (Wiedemann, 1824) e dos extratos de diferentes espécies de plantas avaliação do potencial atrativo e repelente das plantas: avaliação do potencial atrativo e repelente das plantas

A mosca da fruta é uma das principais pragas agrícolas. Neste trabalho determinou-se a composição volátil do nutriente FNI 210 (proteína alimentar) e dos extratos de cinco plantas: Cedronella canariensis, Eucalyptus globulus, Laurus novocanariensis, Myrtus communis e Ruta chalepensis e avaliou-se o seu potencial atrativo e repelente em moscas adultas num olfatómetro em Y. A composição volátil do nutriente e dos extratos foi semelhante à encontrada por outros autores e apresentou compostos atrativos para a mosca da fruta. Nos bioensaios com o olfatómetro as moscas foram atraídas à proteína mas a percentagem média de respostas variou de acordo com o sexo, estado sexual, idade e número de indivíduos por grupo sendo mais alta aos 8 dias em grupos de 5. No geral, as fêmeas virgens responderam mais do que as não virgens e mais do que os machos virgens. O número de insetos que se dirigiram à proteína foi superior na primeira repetição nos primeiros 10 e 20 minutos. Contudo, em todos os bioensaios houve um número elevado de indivíduos não responderam. Nos bioensaios das plantas a resposta do mesmo grupo de 5 indivíduos com 8 dias foi testada três vezes no olfatómetro pela ordem seguinte: sem amostra, com proteína e com extrato de planta. Nos três casos as respostas dos adultos variaram de acordo com o sexo e estado sexual. As percentagens médias de respostas aos extratos foram superiores às obtidas nos ensaios sem amostra e menores que à proteína, á exceção do extrato de L. novocanariensis que apresentou um potencial atrativo superior ao da proteína nos machos virgens. Nos testes com o extrato, as respostas ao braço com amostra foram superiores ao braço sem amostra, à exceção das respostas das fêmeas não virgens ao extrato de R. chalepensis, o que sugere ser esta a única planta com potencial repelente.

Índices de obesidade central e fatores de risco cardiovascular na síndrome dos ovários policísticos

Fundamento: A obesidade abdominal apresenta elevada prevalência em mulheres com síndrome dos ovários policísticos (SOP) e está associada a um aumento do risco cardiovascular. Objetivo: Verificar a acurácia da circunferência da cintura (CC), da relação cintura-quadril (RCQ), da relação cinturaestatura (RCEST) e do índice de conicidade (índice C), no que se refere à detecção de fatores de risco cardiovascular (FRCV) em mulheres com SOP. Métodos: Por meio de estudo transversal, foram alocadas 102 mulheres (26,5 ± 5 anos) com diagnóstico de SOP, de acordo com o consenso de Rotterdam. O colesterol total (CT), os triglicerídeos (TG), o LDL-colesterol (LDL-C), o HDLcolesterol (HDL-C), a glicemia de jejum, a glicemia após teste oral de tolerância à glicose (TOTG) e a pressão arterial (PA) foram avaliados em todas as pacientes, além das variáveis antropométricas. Resultados: A relação cintura-estatura foi o marcador que apresentou correlações positivas significativas com o maior número de FRCV (PA, TG e glicemia após TOTG), destacando-se ainda a correlação negativa com HDL-C. Todos os marcadores antropométricos avaliados se correlacionaram positivamente com PA, enquanto CC e RCQ apresentaram correlação positiva também com TG. No tocante à acurácia para detecção de FRCV, os indicadores antropométricos considerados apresentaram taxas de sensibilidade superiores a 60%, com destaque para a RCEST, que apresentou sensibilidade superior a 70%. Conclusão: A RCEST demonstrou ser o indicador antropométrico com a melhor acurácia para a predição de FRCV. Nesse sentido, propõe-se a inclusão desse parâmetro de fácil mensuração na avaliação clínica para o rastreamento de mulheres com SOP e FRCV----------------------ABSTRACT Background: Women with polycystic ovary syndrome (PCOS) present a high prevalence of abdominal obesity, which is associated with an increased cardiovascular risk. Objective: To verify the accuracy of the waist circumference (WC), waist-to-hip ratio (WHR), waist-to-height ratio (WHtR) and the conicity index (CI) in the detection of cardiovascular risk factors (CVRF) in women with PCOS. Methods: The present transversal study allocated 102 women (26.5 ± 5 years) with a diagnosis of PCOS, according to the Rotterdam criteria. Total cholesterol (TC), triglycerides (TG), LDL-cholesterol (LDL-C), HDL-cholesterol (HDL-C), fasting glucose, glucose after the oral glucose tolerance test (OGTT) and blood pressure (BP) were evaluated in all patients, in addition to the anthropometric variables. Results: The WHtR was the marker that presented significant positive correlations with the highest number of CVRF (BP, TG and post-OGTT glucose), whereas there was a negative correlation with HDL-C. All the evaluated anthropometric markers were positively correlated with BP, whereas WC and WHR also presented a positive correlation with TG. Regarding the accuracy for the detection of CVRF, the anthropometric markers presented a sensibility > 60%, especially the WHtR, which had a sensibility > 70%. Conclusion: The WHtR showed to be the most accurate anthropometric indicator for the prediction of CVRF. In this sense, we propose the inclusion of this easily-measured parameter in the clinical assessment for the screening of women with PCOS and CVRF

Infiltração de sal de alumínio em fibras de sisal para obtenção de fibras de alumina

ANDRADE JR., T. E. et al. Infiltração de sal de alumínio em fibras de sisal para obtenção de fibras de alumina. Cerâmica, v.51, n.317, p.37-41.ISSN 0366-6913. Disponível em:-69132005000100008&script=sci_abstract&tlng=pt>. Acesso em: 06 out. 2010.

Modulação da expressão da proteína XPA em resposta ao tratamento com azul de metileno fotossensibilizado

Reactive oxygen species (ROS) are produced by aerobic metabolism and react with biomolecules, such as lipids, proteins and DNA. In high concentration, they lead to oxidative stress. Among ROS, singlet oxygen (1O2) is one of the main ROS involved in oxidative stress and is one of the most reactive forms of molecular oxygen. The exposure of some dyes, such as methylene blue (MB) to light (MB+VL), is able to generate 1O2 and it is the principle involved in photodynamic therapy (PDT). 1O2 e other ROS have caused toxic and carcinogenic effects and have been associated with ageing, neurodegenerative diseases and cancer. Oxidative DNA damage is mainly repaired by base excision repair (BER) pathway. However, recent studies have observed the involvement of nucleotide excision repair (NER) factors in the repair of this type of injury. One of these factors is the Xeroderma Pigmentosum Complementation Group A (XPA) protein, which acts with other proteins in DNA damage recognition and in the recruitment of other repair factors. Moreover, oxidative agents such as 1O2 can induce gene expression. In this context, this study aimed at evaluating the response of XPA-deficient cells after treatment with photosensitized MB. For this purpose, we analyzed the cell viability and occurrence of oxidative DNA damage in cells lines proficient and deficient in XPA after treatment with MB+VL, and evaluated the expression of this enzyme in proficient and complemented cells. Our results indicate an increased resistance to treatment of complemented cells and a higher level of oxidative damage in the deficient cell lines. Furthermore, the treatment was able to modulate the XPA expression up to 24 hours later. These results indicate a direct evidence for the involvement of NER enzymes in the repair of oxidative damage. Besides, a better understanding of the effects of PDT on the induction of gene expression could be provided

Atividade antioxidante e antiproliferativa de extratos de folhas de Plukenetia volubilis L. (EUPHORBIACEAE)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Avaliação das atividades antioxidantes e citotóxicas de extratos ricos em polissacarídeos extraídos das hastes de mandacaru (Cereus Jamacaru de Candolle, Cactaceae)

The use of medicinal plants to cure and treat various diseases is a common practice in the world and in Brazil. In several regions of the Brazil´s Northeast, the cactus Cereus jamacaru, known as mandacaru, is used popularly as a treatment to many diseases, including those related to heart respiratory diseases, gastric ulcers, scurvy, and kidney diseases. However, there is a scarcity in the scientific literature that proves scientifically the popular application of this cactus. Like other plants, Cereus jamacaru synthesizes several potentially bioactive molecules, like as polysaccharides. In this work, three polysaccharides-rich aqueous extracts, MCA80, MPM and MCP60, were obtained from this plant and analyzed chemically, as well as their cytotoxic and antioxidant potential. The data showed that all extracts consist mainly of polysaccharides (89.42 to 95.76%), but also protein (> 2%) and phenolic (3 to 8.87%) contaminants were detected. All extracts are rich in galactose, glucose and mannose. In addition, glucuronic acid was found in MCA80 and MCP60. The extracts showed total antioxidant capacity ranged from 55.21 to 68.13 of ascorbic acid equivalents (AAE). Besides, they exhibited reducer power and cupric chelation in a dose-dependent manner. None of the extracts inhibited the MTT reduction in the presence of prostate tumor cells (PC-3). However, MCP60 was the most effective extract by preventing the reduction of MTT by about 80% in the presence of cells 786. Nuclear fragmentation tests showed that this extract induces cell death. The data indicated that mandacaru synthesizes bioactive polysaccharides with potential as antioxidant and antitumor agents. For future studies, it is intended to purify and characterize these polysaccharides and its antioxidant and antitumor mechanisms

Influência da vermiculita expandida na resistência à compressão e reologia de pastas cimentantes de poços de petróleo

Several problems related to the loss of hydraulic seal in oilwells, causing gas migration and/or contamination of the production zone by water, have been reported. The loss of the hydraulic seal is a consequence of cracks which can be occasioned either by the invasion of gas during the wait on cement or by the expansion of the casing causing the fracture of the cement sheath. In case of the pressure of the formation is higher than the pressure in the annulus, gas can migrate into the slurry and form microannulus, which are channels where gas migrates after the cement is set. Cracks can be also occasioned by the fracture of the cement sheath when it does not withstand the thermal and dynamic loads. In reservoirs where the oil is heavy, steam water injection operation is required in order to get the oil flowing. This operation increases the temperature of the casing, and then it expands and causes the fracture of the cement sheath in the annulus. When the failures on the cement are detected, remedial cementing is required, which raise costs caused by the interventions. Once the use of cement in the construction civil sector is older than its use in the petroleum sector, it is common to bring technologies and solutions from the civil construction and apply them on the petroleum area. In this context, vermiculite, a mineral-clay widely encountered in Brazil, has been used, on its exfoliated form, in the civil construction, especially on the manufacture of lights and fireproof concretes with excellent thermal and acoustical properties. It has already been reported in scientific journals, studies of the addition of exfoliated vermiculite in Portland cements revealing good properties related to oilwell cementing operations. Thus, this study aimed to study the rheological behavior, thickening time, stability and compressive strength of the slurries made of Portland cement and exfoliated vermiculite in 5 different compositions, at room temperature and heated. The results showed that the compressive strength decreased with the addition of exfoliated vermiculite, however the values are still allowed for oiwell cementing operations. The thickening time of the slurry with no exfoliated vermiculite was 120 min and the thickening time of the slurry with 12 % of exfoliated vermiculite was 98 min. The stability and the rheological behavior of the slurries revealed that the exfoliated vermiculite absorbed water and therefore increased the viscosity of the slurries, even though increasing the factor cement-water. The stability experiment carried out at 133 ºF showed that, there was neither sedimentation nor reduction of the volume of the cement for the slurry with 12 % of exfoliated vermiculite. Thus, the addition of exfoliated vermiculite accelerates the set time of the cement and gives it a small shrinkage during the wait on cement, which are important to prevent gas migration

Produção de fibras de alumina biomórfica a partir do sisal

Sisal is a renewable agricultural resource adapted to the hostile climatic and soil conditions particularly encountered in the semi-arid areas of the state of Rio Grande do Norte. Consequently, sisal has played a strategic role in the economy of the region, as one of few options of income available in the semi-arid. Find new options and adding value to products manufactured from sisal are goals that contribute not only to the scientific and technological development of the Northeastern region, but also to the increase of the family income for people that live in the semi-arid areas where sisal is grown. Lignocellulosic fibers are extracted from sisal and commonly used to produce both handcrafted and industrial goods including ropes, mats and carpets. Alternatively, addedvalue products can be made using sisal to produce alumina fibers (Al2O3) by biotemplating, which consists in the reproduction of the natural fiber-like structure of the starting material. The objective of this study was to evaluate the conditions necessary to convert sisal into alumina fibers by biotemplating. Alumina fibers were obtaining after pretreating sisal fibers and infiltrating them with a Al2Cl6 saturated solution, alumina sol from aluminum isopropoxide or aluminum gas. Heat-treating temperatures varied from 1200 ºC to 1650 °C. The resulting fibers were then characterized by X-ray diffraction and scanning electronic microscopy. Fibers obtained by liquid infiltration revealed conversion only of the surface of the fiber into α-Al2O3, which yielded limited resistance to handling. Gas infiltration resulted in stronger fibers with better reproduction of the inner structure of the original fiber. All converted fibers consisted of 100% α-Al2O3 suggesting a wide range of technological applications especially those that require thermal isolation

Incorporação de resíduo cerâmico para prevenção da retrogressão da resistência de cimentos de poços de petróleo submetidos à injeção de vapor

Steam injection is the most used thermal recovery method of oil nowadays because of the high degree of development of the technique that allows high recovery factors. However, injection of superheated steam into the reservoir affects the entire structure of the well, including the cemented layer that presents a retrogression of compressive strength and increases the permeability due to formation of more crystalline and denser phases at temperatures above 110 °C. These changes result in failures in the cement that favor the entrance of formation fluids into the annulus space resulting in unsafe operations and restrictions in the economic life of the well. But the strength retrogression can be prevented by partial replacement of cement by silica-based materials that reduce the CaO/SiO2 ratio of cement slurries changing the trajectory of the reactions, converting those deleterious phases in phases with satisfactory mechanical strength and permeability. The aim of this study was to evaluate the behavior of a ceramic waste material rich in silica in partial and total substitution of a mineral additive used to fight the strength retrogression of cement slurries subjected to high temperatures. The evaluation was made by compression, X-ray diffraction (XRD) and thermogravimetry (TG/DTG). The samples were submitted to a cycle of low temperature (38 °C) for 28 days and a cycle of low temperature followed by exposure to 280 ºC and 1000 psi by 3 days. The results showed that slurries with additions of up to 30% of the waste material are not enough to prevent the strength retrogression, while slurries with additions of the waste material combined with silica flour in various proportions produced hydrated products of low Ca/Si ratios that maintained the compressive strength at satisfactory levels

Contribuição ao desenvolvimento de ontologias para processos petroquímicos : estudo de caso em uma planta DEA

In the last decades, the oil, gas and petrochemical industries have registered a series of huge accidents. Influenced by this context, companies have felt the necessity of engaging themselves in processes to protect the external environment, which can be understood as an ecological concern. In the particular case of the nuclear industry, sustainable education and training, which depend too much on the quality and applicability of the knowledge base, have been considered key points on the safely application of this energy source. As a consequence, this research was motivated by the use of the ontology concept as a tool to improve the knowledge management in a refinery, through the representation of a fuel gas sweetening plant, mixing many pieces of information associated with its normal operation mode. In terms of methodology, this research can be classified as an applied and descriptive research, where many pieces of information were analysed, classified and interpreted to create the ontology of a real plant. The DEA plant modeling was performed according to its process flow diagram, piping and instrumentation diagrams, descriptive documents of its normal operation mode, and the list of all the alarms associated to the instruments, which were complemented by a non-structured interview with a specialist in that plant operation. The ontology was verified by comparing its descriptive diagrams with the original plant documents and discussing with other members of the researchers group. All the concepts applied in this research can be expanded to represent other plants in the same refinery or even in other kind of industry. An ontology can be considered a knowledge base that, because of its formal representation nature, can be applied as one of the elements to develop tools to navigate through the plant, simulate its behavior, diagnose faults, among other possibilities

Avaliação da corrosão em dutos por técnica gravimétrica e de resistência elétrica

With the increasing of demand for natural gas and the consequent growth of the pipeline networks, besides the importance of transport and transfer of oil products by pipeline, and when it comes to product quality and integrity of the pipeline there is an important role regarding to the monitoring internal corrosion of the pipe. This study aims to assess corrosion in three pipeline that operate with different products, using gravimetric techniques and electrical resistance. Chemical analysis of residues originated in the pipeline helps to identify the mechanism corrosive process. The internal monitoring of the corrosion in the pipelines was carried out between 2009 and 2010 using coupon weight loss and electrical resistance probe. Physico-chemical techniques of diffraction and fluorescence X-rays were used to characterize the products of corrosion of the pipelines. The corrosion rate by weight loss was analyzed for every pipeline, only those ones that has revealed corrosive attack were analyzed located corrosion rate. The corrosion potential was classified as low to pipeline gas and ranged from low to severe for oil pipelines and the pipeline derivatives. Corrosion products were identified as iron carbonate, iron oxide and iron sulfide

Efeito da adição de cargas minerais leves na resistência mecânica de grautes para cimentação de poços offshore

The preparation of cement slurries for offshore well cementing involves mixing all solid components to be added to the mixing water on the platform. The aim of this work was to study the formulation of pre-prepared dry mixtures, or grouts, for offshore oilwell cementing. The addition of mineral fillers in the strength of lightweight grouts applied for depths down to 400 m under water depths of 500 m was investigated. Lightweight materials and fine aggregates were selected. For the choice of starting materials, a study of the pozzolanic activity of low-cost fillers such as porcelain tile residue, microsilica and diatomaceous earth was carried out by X-ray diffraction and mechanical strength tests. Hardened grouts containing porcelain tile residue and microsilica depicted high strength at early ages. Based on such preliminary investigation, a study of the mechanical strength of grouts with density 1.74 g/cm3 (14.5 lb/gal) cured initially at 27 °C was performed using cement, microsilica, porcelain tile residue and an anti-foaming agent. The results showed that the mixture containing 7% of porcelain tile residue and 7% of microsilica was the one with the highest compressive strength after curing for 24 hours. This composition was chosen to be studied and adapted for offshore conditions based on testes performed at 4 °C. The grout containing cement, 7% of porcelain tile residue, 7% of active silica and admixtures (CaCl2), anti-foaming and dispersant resulted satisfactory rheology and mechanical strength after curing for 24 hours of curing

Potencial larvicida de extratos de plantas regionais no controle de larvas de Aedes aegypti

Dengue, amongst the virus illnesses one can get by vectorial transmission, is the one that causes more impact in the morbidity and mortality of world s population. The resistance to the insecticides has caused difficulties to control of vector insect (Aedes aegypti) and has stimulated a search for vegetables with larvicidal activity. The biodiversity of Caatinga is barely known and it is potential of use even less. Some plants of this biome are commercialized in free fairs northeast of Brazil, because of its phytotherapics properties. The vegetables in this study had been selected by means of a questionnaire applied between grass salesmen and natives of the Serido region from Rio Grande do Norte state; culicids eggs had been acquired with traps and placed in container with water for the larva birth. Thirty larvae had been used in each group (a group control and five experimental groups), with four repetitions four times. The vegetables had been submitted to the processes of decoction, infusion and maceration in the standard concentration of 100g of the vegetable of study in 1l of H2O and analyzed after ½, 1, 2, 4, 8, 12, 24 and 48 hours for verification of the average lethal dose (LD50) from the groups with thirty larva. The LD50 was analyzed in different concentrations (50g/l, 100g/l, 150g/l, 200g/l e 300g/l) of Aspidosperma pyrifolium Mart. 48 extracts of rind, leaf and stem of the seven vegetal species: Aspidosperma pyrifolium Mart., Mimosa verrucosa Benth, Mimosa hostilis (Mart.) Benth., Myracrodruon urundeuva Allemão, Ximenia americana L, Bumelia sartorum Mart Zizyphus joazeiro Mart, had been analyzed. The extracts proceeding from the three methods were submitted to the freezedrying, to evaluate and to quantify substances extracted in each process. The results had shown that Aspidosperma pyrifolium Mart. and Myracrodruon urundeuva Allemão are the species that are more distinguished as larvicidal after 24 hours of experiment, in all used processes of extraction in the assays. The Zizyphus joazeiro Mart species has not shown larvicidal activity in none of the assays. In relation to the extraction method, the decoction was the most efficient method in the mortality tax of the A. aegypti larvae