Evaluation of two 99mTc-DTPA radioaerosols with different characteristics in lung ventilation studies

Two radioaerosol preparations, TechneScan®-DTPA (99mTc-DTPA, 40 mCi/3 ml; IPEN-CNEN, São Paulo, SP, Brazil) and TechneScan®-DTPA/AEROSOL (99mTc-DTPA/A, 15 mCi/1.5 ml with 0.5 ml ethanol; Mallinckrodt Medical, St. Louis, MO, USA), were compared in pulmonary ventilation studies in terms of total radiocounts and clearance after inhalation. An aerosol with ethanol is supposed to better distribute the radioparticles in the lungs. Twenty normal nonsmoking volunteers (10 men and 10 women), mean age of 23.2 years (range: 20 to 35 years), were studied. Images were obtained immediately and 30, 60 and 90 min after inhalation. Total and regional counts were obtained and the clearance half-lives of both lungs were determined. There was no difference in total counts between the two types of radioaerosol at any time (mean of ~188,000 cpm for male and female subjects at time zero in both aerosols). The highest count was obtained in the middle region of both lungs (P<0.001) with both preparations. The clearance half-life did not differ between aerosols (mean of ~80-88 min for male and female subjects for both aerosols). Small nonsignificant regional differences were observed. No differences between genders or between right and left lung were observed. 99mTc-DTPA/A generated the highest output of radioaerosol. 99mTc-DTPA with alcohol costs approximately five times more than the aerosol without alcohol. The present results show that either kind of aerosol may be adopted routinely for use in pulmonary examinations without affecting diagnosis. We suggest that the amount of 740 mBq (20 mCi) of 99mTc-DTPA in 1.5 ml saline can be used for routine examinations resulting in reduction of costs in pulmonary ventilation studies without diagnostic impairment.

Relation of cervical length at 22-24 weeks of gestation to demographic characteristics and obstetric history

Preterm delivery is the main cause of neonatal death and ultrasonographic cervical assessment has been shown to be more accurate than digital examination in recognizing a short cervix. This is a cross-sectional study, involving 1131 women at 22-24 weeks of pregnancy, designed to determine the distribution of cervical length and to examine which variables of demographic characteristics and obstetric history increase the risk of a short cervix (15 mm or less). The distribution of maternal demographic and obstetric history characteristics among patients with cervical length £15 mm was analyzed and compared to the findings for the general population. Risk ratios (RR) between subgroups were generated from this comparison. Median cervical length was 37 mm and in 1.5% of cases it was 15 mm or less. The proportion of women with a short cervix (<=15 mm) was significantly higher among patients with a low body mass index (RR = 3.5) and in those with previous fetal losses between 16-23 weeks (RR = 33.1) or spontaneous preterm deliveries between 24-32 weeks (RR = 14.1). We suggest that transvaginal sonographic measurement of cervical length be performed as part of a routine midtrimester ultrasound evaluation. There are specific variables of demographic characteristics and obstetric history which increase the risk of detecting a short cervix at 22-24 weeks.

Towards sustainable transport: A comparison of demographic and behavioural characteristics of Finnish and international car sharing users

SStrong evidence suggests that the climate is changing and that these changes are largely caused by human activities. A consensus exists among researchers that human activity is causing global warming and that actions to mitigate global warming need to be taken swiftly. The transportation sector, which relies heavily on fossil fuel burning and primarily oil, is one of the big contributors to air pollution problems at local, regional and global levels. It is the fastest growing source of greenhouse gas emissions and is estimated to be responsible for nearly a quarter of global energyrelated carbon dioxide emissions. Car sharing is a mobility solution encouraging its users to decrease private car usage in favour of communal transit and environmental goals. The idea of car sharing originates from the aspiration to decrease personal car ownership and to reduce vehicle distance travelled. This thesis seeks to complement the understanding of Finnish car sharing users and their usage through better categorization. Through better categorization and segmentation of Finnish car sharing users the thesis seeks to provide information for improved marketing insight. Research is done on the demographic and behavioural characteristics of Finnish car sharing users and they are compared with international findings about the characteristics of International car sharing users. The main research problem is Are Finnish car sharing users similar to international ones? A theoretical research framework on the determinants of individual car sharing usage is built based on international research about demographic and behaviouristic characteristics. After this a quantitative survey is performed to the customers of a Finnish car sharing organization. The data analysed in the thesis consist out of 532 answers received from the car sharing organizations customers. The data is analysed with descriptive and other exploratory methods, which create an understanding of Finnish car sharing users. At the end of the analysis the demographic and behavioural characteristics of Finnish car sharing users are compared with international ones. The research findings of the thesis indicate that the demographic and behavioural characteristics of Finnish car sharing usage largely follow those of their international counterparts. Thanks to the thesis results the car sharing organization is able to better target their customers through improved marketing insight.

Histopathological characteristics of a novel knock-in mouse prostate cancer model

Prostate cancer is relatively unique to man. There is no naturally occurring prostate cancer in the mouse. Pre-clinical studies involve the establishment of a genetically engineered mouse prostate cancer model with features close to those of the human situation. A new knock-in mouse adenocarcinoma prostate (KIMAP) model was established, which showed close-to-human kinetics of tumor development. In order to determine if the similar kinetics is associated with heterogeneous tumor architecture similar to the human situation, we utilized a new mouse histological grading system (Gleason analogous grading system) similar to the Gleason human grading system and flow cytometry DNA analysis to measure and compare the adenocarcinoma of the KIMAP model with human prostate cancer. Sixty KIMAP prostate cancer samples from 60 mice were measured and compared with human prostate cancer. Flow cytometry DNA analysis was performed on malignant prostate tissues obtained from KIMAP models. Mice with prostate cancer from KIMAP models showed a 53.3% compound histological score rate, which was close to the human clinical average (50%) and showed a significant correlation with age (P = 0.001). Flow cytometry analyses demonstrated that most KIMAP tumor tissues were diploid, analogous to the human situation. The similarities of the KIMAP mouse model with tumors of the human prostate suggest the use of this experimental model to complement studies of human prostate cancer.

Weld joint characteristics by nano-materials addition

The need for industries to remain competitive in the welding business, has created necessity to develop innovative processes that can exceed customer’s demand. Significant development in improving weld efficiency, during the past decades, still have their drawbacks, specifically in the weld strength properties. The recent innovative technologies have created smallest possible solid material known as nanomaterial and their introduction in welding production has improved the weld strength properties and to overcome unstable microstructures in the weld. This study utilizes a qualitative research method, to elaborate the methods of introducing nanomaterial to the weldments and the characteristic of the welds produced by different welding processes. The study mainly focuses on changes in the microstructural formation and strength properties on the welded joint and also discusses those factors influencing such improvements, due to the addition of nanomaterials. The effect of nanomaterial addition in welding process modifies the physics of joining region, thereby, resulting in significant improvement in the strength properties, with stable microstructure in the weld. The addition of nanomaterials in the welding processes are, through coating on base metal, addition in filler metal and utilizing nanostructured base metal. However, due to its insignificant size, the addition of nanomaterials directly to the weld, would poses complications. The factors having major influence on the joint integrity are dispersion of nanomaterials, characteristics of the nanomaterials, quantity of nanomaterials and selection of nanomaterials. The addition of nanomaterials does not affect the fundamental properties and characteristics of base metals and the filler metal. However, in some cases, the addition of nanomaterials lead to the deterioration of the joint properties by unstable microstructural formations. Still research are ongoing to achieve high joint integrity, in various materials through different welding processes and also on other factors that influence the joint strength.

Identification of characteristics for successful university-company partnership development

The importance of university-company collaboration has increased during the last decades. The drivers for that are, on the one hand, changes in business logic of companies and on the other hand the decreased state funding of universities. Many companies emphasize joint research with universities as an enabling input to their development processes, which aim at creating new innovations, products and wealth. These factors have changed universities’ operations and they have adopted several practices of dynamic business organizations, such as strategic planning, monitoring and controlling methods of internal processes etc. The objective of this thesis is to combine different characteristics of successful university-company partnership and its development. The development process starts with identifying potential partners in the university’s interest group, which requires understanding the role of different partners in the innovation system. Next, in order to find a common development basis, matching the policy and strategy between partners is needed. The third phase is to combine the academic and industrial objectives of a joint project, which is a typical form of university-company collaboration. The optimum is a win-win situation where both partners, universities and companies, can get addedvalue. For the companies added value typically means access to new research results before their competitors. For the universities added value offers a possibility to carry on high level scientific work. The research output in the form of published scientific articles is evaluated by the international science community. Because the university-company partnership is often executed by joint projects, the different forms of this kind of projects is discussed in this study. The most challenging form of collaboration is a semi-open project model, which is not based on bilateral activities between universities and companies but on a consortium of several universities, research institutes and companies. The universities and companies are core actors in the innovation system. Thus the discussion of their roles and relations to public operators like publicly funded financiers is important. In the Finnish innovation system there are at least the following doers executing strategies and policies: EU, Academy of Finland and TEKES. In addition to these, Strategic Centres for Science, Technology and Innovation which are owned jointly by companies, universities and research organizations have a very important role in their fields of business. They transfer research results into commercial actions to generate wealth. The thesis comprises two parts. The first part consists of an overview of the study including introduction, literature review, research design, synthesis of findings and conclusions. The second part introduces four original research publications.

Effects of a PPARG gene variant on obesity characteristics in Brazil

The contribution of genetic factors to the development of obesity has been widely recognized, but the identity of the genes involved has not yet been fully clarified. Variation in genes involved in adipocyte differentiation and energy metabolism is expected to have a role in the etiology of obesity. We assessed the potential association of a polymorphism in one candidate gene, peroxisome proliferator-activated receptor-gamma (PPARGg), involved in these pathways and obesity-related phenotypes in 335 Brazilians of European descent. All individuals included in the sample were adults. Pregnant women, as well as those individuals with secondary hyperlipidemia due to renal, liver or thyroid disease, and diabetes, were not invited to participate in the study; all other individuals were included. The gene variant PPARG Pro12Ala was studied by a PCR-based method and the association between this genetic polymorphism and obesity-related phenotypes was evaluated by analysis of covariance. Variant allele frequency was PPARG Ala12 = 0.09 which is in the same range as described for European and European-derived populations. No statistically significant differences were observed for mean total cholesterol, LDL cholesterol, HDL cholesterol, or triglyceride levels among PPARG genotypes in either gender. In the male sample, an association between the PPARG Pro12Ala variant and body mass index was detected, with male carriers of the Ala variant presenting a higher mean body mass index than wild-type homozygotes (28.3 vs 26.2 kg/m², P = 0.037). No effect of this polymorphism was detected in women. This finding suggests that the PPARG gene has a gender-specific effect and contributes to the susceptibility to obesity in this population.

Clinical, epidemiological, and microbiological characteristics of bacteremia caused by high-level gentamicin-resistant Enterococcus faecalis

Enterococcus spp bacteremia is associated with high mortality and the appearance of high-level gentamicin resistance (HLGR) created additional challenges for the treatment of these infections. We evaluated the epidemiological and clinical characteristics of patients with bacteremias caused by HLGR and non_HLGR Enterococcus faecalis isolates at a teaching hospital in the State of São Paulo, Brazil. Patients with bacteremia due to E. faecalis diagnosed between January 1999 and December 2003 were included in the study. We collected clinical, epidemiological, and microbiological data from medical records. Banked isolates were typed using pulsed-field gel electrophoresis. We identified 145 cases of E. faecalis bacteremia: 66 (45.5%) were caused by HLGR isolates and 79 (54.5%) by non_HLGR. In the univariate analysis, patients with HLGR infection were older, had higher rates of bladder catheterization, and more often had treatment with cephalosporin, quinolone, and/or carbapenem compared with patients with non_HLGR infection (P < 0.05). Multivariate analysis indicated that older age, hematological malignancy, and previous use of vancomycin were independently associated with HLGR (P < 0.05). Mortality rates were not significantly different among patients with HLGR (50%) and non_HLGR (43%) infections (P = 0.40). Of the 32 genotyped isolates, 16 were distributed into 6 main electrophoresis patterns and 16 others had distinct patterns. E. faecalis bacteremia is associated with high mortality and is frequently caused by HLGR isolates at this teaching hospital. The variability among genotyped isolates suggests that endogenous infections, rather than patient-to-patient transmission of E. faecalis, are more common at this institution.

Demographic and metabolic characteristics of individuals with progressive glucose tolerance

We evaluated changes in glucose tolerance of 17 progressors and 62 non-progressors for 9 years to improve our understanding of the pathogenesis of type 2 diabetes mellitus. Changes in anthropometric measurements and responses to an oral glucose tolerance test (OGTT) were analyzed. We identified 14 pairs of individuals, one from each group, who were initially normal glucose tolerant and were matched for gender, age, weight, and girth. We compared initial plasma glucose and insulin curves (from OGTT), insulin secretion (first and second phases) and insulin sensitivity indices (from hyperglycemic clamp assay) for both groups. In the normal glucose tolerant phase, progressors presented: 1) a higher OGTT blood glucose response with hyperglycemia in the second hour and a similar insulin response vs non-progressors; 2) a reduced first-phase insulin secretion (2.0 ± 0.3 vs 2.3 ± 0.3 pmol/L; P < 0.02) with a similar insulin sensitivity index and a lower disposition index (3.9 ± 0.2 vs 4.1 ± 0.2 µmol·kg-1·min-1 ; P < 0.05) vs non-progressors. After 9 years, both groups presented similar increases in weight and fasting blood glucose levels and progressors had an increased glycemic response at 120 min (P < 0.05) and reduced early insulin response to OGTT (progressors, 1st: 2.10 ± 0.34 vs 2nd: 1.87 ± 0.25 pmol/mmol; non-progressors, 1st: 2.15 ± 0.28 vs 2nd: 2.03 ± 0.39 pmol/mmol; P < 0.05). Theses data suggest that β-cell dysfunction might be a risk factor for type 2 diabetes mellitus.

Heparan sulphate, its derivatives and analogues share structural characteristics that can be exploited, particularly in inhibiting microbial attachment

Heparan sulphate (HS) and the related polysaccharide, heparin, exhibit conformational and charge arrangement properties, which provide a degree of redundancy allowing several seemingly distinct sequences to exhibit the same activity. This can also be mimicked by other sulphated polysaccharides, both in overall effect and in the details of interactions and structural consequences of interactions with proteins. Together, these provide a source of active compounds suitable for further development as potential drugs. These polysaccharides also possess considerable size, which bestows upon them an additional useful property: the capability of disrupting processes comprising many individual interactions, such as those characterising the attachment of microbial pathogens to host cells. The range of involvement of HS in microbial attachment is reviewed and examples, which include viral, bacterial and parasitic infections and which, in many cases, are now being investigated as potential targets for intervention, are identified.

Influence of population and exercise protocol characteristics on hemodynamic determinants of post-aerobic exercise hypotension

Due to differences in study populations and protocols, the hemodynamic determinants of post-aerobic exercise hypotension (PAEH) are controversial. This review analyzed the factors that might influence PAEH hemodynamic determinants, through a search on PubMed using the following key words: “postexercise” or “post-exercise” combined with “hypotension”, “blood pressure”, “cardiac output”, and “peripheral vascular resistance”, and “aerobic exercise” combined only with “blood pressure”. Forty-seven studies were selected, and the following characteristics were analyzed: age, gender, training status, body mass index status, blood pressure status, exercise intensity, duration and mode (continuous or interval), time of day, and recovery position. Data analysis showed that 1) most postexercise hypotension cases are due to a reduction in systemic vascular resistance; 2) age, body mass index, and blood pressure status influence postexercise hemodynamics, favoring cardiac output decrease in elderly, overweight, and hypertensive subjects; 3) gender and training status do not have an isolated influence; 4) exercise duration, intensity, and mode also do not affect postexercise hemodynamics; 5) time of day might have an influence, but more data are needed; and 6) recovery in the supine position facilitates systemic vascular resistance decrease. In conclusion, many factors may influence postexercise hypotension hemodynamics, and future studies should directly address these specific influences because different combinations may explain the observed variability in postexercise hemodynamic studies.

Personality traits and psychiatric comorbidities in alcohol dependence

Non-adaptive personality traits may constitute risk factors for development of psychiatric disorders such as depression and anxiety. We aim to evaluate associations and the predictive value of personality traits among alcohol-dependent individuals, with or without psychiatric comorbidities. The convenience sample comprised two groups of males over 18 years of age: one with subjects who had an alcohol dependence diagnosis (AG, n=110), and a control group without abuse and/or alcohol dependence diagnosis (CG, n=110). The groups were assessed by means of the Structured Clinical Interview DSM-IV (SCID-IV). AG participants were recruited among outpatients from the university hospital, whereas CG participants were recruited from a primary healthcare program. Data collection was done individually with self-assessment instruments. Parametric statistics were performed, and a significance level of P=0.05 was adopted. A positive correlation was observed between openness and the length of time that alcohol has been consumed, as were significant and negative correlations between conscientiousness and both the length of time alcohol has been consumed and the number of doses. For alcoholics, extraversion emerged as a protective factor against depression development (P=0.008) and tobacco abuse (P=0.007), whereas openness worked as a protective factor against anxiety (P=0.02). The findings point to specific deficits presented by alcoholics in relation to personality traits with or without psychiatric comorbidities and to the understanding that therapeutic approaches should favor procedures and/or preventive measures that allow more refined awareness about the disorder.

Nutritional characteristics of amazonian fish fat (Colossoma macropomum) and its effect on lipid metabolism of rats fed hypercholesterolemic diets

The effects of fat from tambaqui (Colossoma macropomum), an Amazonian fish, on some nutritional and lipid parameters in rats were evaluated. Weaned Wistar rats were fed for 6 weeks with hypercholesterolemic diets containing 7.5% of soybean oil (SO), cod liver oil (CO), lard (LA), or tambaqui fat (TF). Food consumption, weight gain, and food conversion were measured weekly. Plasma triglycerides was determined at the beginning and on the 6th week of experiment. Plasma cholesterol was determined at 0, 2, 4 and 6 weeks. After the sacrifice, hepatic lipids (triglycerides and cholesterol) and plasma triglycerides, total cholesterol and HDL fractions were determined. Food consumption and weight gain were the same for all groups. There were no differences in plasma triglycerides among the four groups in the 1st and 6th weeks. Regarding the cholesterolemia, TF animals were similar to those fed SO diet, significantly lower than in LA group but higher compared to the CO group. The levels of very low density lipoprotein + low density lipoprotein (VLDL+LDL) were higher in the TF and LA groups compared to the CO and SO groups. However, TA fed animals had high-density lipoprotein (HDL) cholesterol levels higher than the CO group. The ratio (VLDL+LDL)/HDL was higher in the LA group when compared with the remaining groups. In the TA group, the triglycerides and cholesterol concentrations in the liver were similar to the SO group. It may be concluded that tambaqui fat is a good dietary source of lipids as a substitute for lard and similar to soybean oil, as far as atherosclerosis risks is concerned.

Effect of osmotic predehydration on drying characteristics of banana fruits

Osmotic dehydration is considered to be a suitable preprocessing step to reduce the water content of foods. Such products can be dried further by conventional drying processes to lower their water activity and thus extend their shelf life. In this work, banana (Musa sapientum) fruits were initially treated by osmosis by varying several parameters of the processing conditions which included, besides the cutting format (longitudinal and round slices) of the fruit, temperature (28 and 49 ºC), syrup concentration (50, 60 and 67 ºBrix), treatment time (2, 4, 6, 10, 14, 16 and 18 hours), fruit and syrup ratio (1:1, 1:2, 1:3 and 1:4) and agitation effects. The best quality products were obtained by the use of the 67 ºBrix syrup, for 60 minutes of osmotic treatment, at 28 ºC, having a fruit and syrup ratio of 1:1 and agitation. The experimental data obtained on reduction in moisture content during the osmotic treatment were correlated with the experimental equation of M/Mo = Ae(-Kt), where A and K are the constants which represent the geometry and effective diffusivity of the drying process. This simplified mathematical model correlated well with the experimental results.

Moisture adsorption characteristics of ginger slices

The moisture adsorption characteristics of dried ginger slices was studied to determine the effect of storage conditions on moisture adsorption for the purpose of shelf life prediction, selection of appropriate packaging materials, evaluate the goodness-of-fit of sorption models, and determine the thermodynamics of moisture adsorption for application in drying. There was a highly significant effect (p < 0.05) of water activity (a w), temperature, and pre-treatment on the equilibrium moisture content (EMC) of the dried ginger slices. At constant a w, the EMC decreased as temperature increased. The EMC of all samples increased as the a w increased at constant temperature. The sorbed moisture of the unpeeled ginger slices was higher than the peeled while those of unblanched samples were higher than the blanched. Henderson equation allows more accurate predictions about the isotherms with the lowest %RMS, and therefore, it describes best the adsorption data followed by GAB, Oswin, and Halsey models in that order. The monolayer moisture generally decreased with temperature for all samples. The isosteric heat decreased with moisture content approaching the asymptotic value or the latent heat of vaporization of pure water (∆Hst = 0) while the entropy of sorption was observed to increase with moisture content.