Determine Initial Cause for Current Premature Portland Cement Concrete Pavement Deterioration Final Report, 2000

A detailed investigation has been conducted on core samples taken from 17 portland cement concrete pavements located in Iowa. The goal of the investigation was to help to clarify the root cause of the premature deterioration problem that has become evident since the early 1990s. Laboratory experiments were also conducted to evaluate how cement composition, mixing time, and admixtures could have influenced the occurrence of premature deterioration. The cements used in this study were selected in an attempt to cover the main compositional parameters pertinent to the construction industry in Iowa. The hardened air content determinations conducted during this study indicated that the pavements that exhibited premature deterioration often contained poor to marginal entrained-air void systems. In addition, petrographic studies indicated that sometimes the entrained-air void system had been marginal after mixing and placement of the pavement slab, while in other instances a marginal to adequate entrained-air void system had been filled with ettringite. The filling was most probably accelerated because of shrinkage cracking at the surface of the concrete pavements. The results of this study suggest that the durability—more sciecifically, the frost resistance—of the concrete pavements should be less than anticipated during the design stage of the pavements. Construction practices played a significant role in the premature deterioration problem. The pavements that exhibited premature distress also exhibited features that suggested poor mixing and poor control of aggregate grading. Segregation was very common in the cores extracted from the pavements that exhibited premature distress. This suggests that the vibrators on the paver were used to overcome a workability problem. Entrained-air voids formed in concrete mixtures experiencing these types of problems normally tend to be extremely coarse, and hence they can easily be lost during the paving process. This tends to leave the pavement with a low air content and a poor distribution of air voids. All of these features were consistent with a premature stiffening problem that drastically influenced the ability of the contractor to place the concrete mixture. Laboratory studies conducted during this project indicated that most premature stiffening problems can be directly attributed to the portland cement used on the project. The admixtures (class C fly ash and water reducer) tended to have only a minor influence on the premature stiffening problem when they were used at the dosage rates described in this study.

Sustainable Development and Concrete Technology, May 2004

For a variety of reasons, the concrete construction industry is not sustainable. First, it consumes huge quantities of virgin materials. Second, the principal binder in concrete is portland cement, the production of which is a major contributor to greenhouse gas emissions that are implicated in global warming and climate change. Third, many concrete structures suffer from lack of durability which has an adverse effect on the resource productivity of the industry. Because the high-volume fly ash concrete system addresses all three sustainability issues, its adoption will enable the concrete construction industry to become more sustainable. In this paper, a brief review is presented of the theory and construction practice with concrete mixtures containing more than 50% fly ash by mass of the cementitious material. Mechanisms are discussed by which the incorporation of high volume of fly ash in concrete reduces the water demand, improves the workability, minimizes cracking due to thermal and drying shrinkage, and enhances durability to reinforcement corrosion, sulfate attack, and alkali-silica expansion. For countries like China and India, this technology can play an important role in meeting the huge demand for infrastructure in a sustainable manner.

Material and Construction Optimization for Prevention of Premature Pavement Distress in PCC Pavements, September 2004

The chemistry of today’s concrete mixture designs is complicated by many variables, including multiple sources of aggregate and cements and a plethora of sometimes incompatible mineral and chemical admixtures. Concrete paving has undergone significant changes in recent years as new materials have been introduced into concrete mixtures. Supplementary cementitious materials such as fly ash and ground granulated blast furnace slag are now regularly used. In addition, many new admixtures that were not even available a few years ago now have widespread usage. Adding to the complexity are construction variables such as weather, mix delivery times, finishing practices, and pavement opening schedules. Mixture materials, mix design, and pavement construction are not isolated steps in the concrete paving process. Each affects and is affected by the other in ways that determine overall pavement quality and long-term performance. Equipment and procedures commonly used to test concrete materials and concrete pavements have not changed in decades, leaving serious gaps in our ability to understand and control the factors that determine concrete durability. The concrete paving community needs tests that will adequately characterize the materials, predict interactions, and monitor the properties of the concrete.

Indicator displacement assays as molecular timers

Dynamic mixtures of Rh-dye complexes can be used to determine the history of chemical events such as the addition of ATP and ADP by UV-vis spectroscopy.

Evalution of Hot Mix Asphalt Moisture Sensitivity Using the Nottingham Asphalt Test Equipment, July 2005

Moisture sensitivity of Hot Mix Asphalt (HMA) mixtures, generally called stripping, is a major form of distress in asphalt concrete pavement. It is characterized by the loss of adhesive bond between the asphalt binder and the aggregate (a failure of the bonding of the binder to the aggregate) or by a softening of the cohesive bonds within the asphalt binder (a failure within the binder itself), both of which are due to the action of loading under traffic in the presence of moisture. The evaluation of HMA moisture sensitivity has been divided into two categories: visual inspection test and mechanical test. However, most of them have been developed in pre-Superpave mix design. This research was undertaken to develop a protocol for evaluating the moisture sensitivity potential of HMA mixtures using the Nottingham Asphalt Tester (NAT). The mechanisms of HMA moisture sensitivity were reviewed and the test protocols using the NAT were developed. Different types of blends as moisture-sensitive groups and non-moisture-sensitive groups were used to evaluate the potential of the proposed test. The test results were analyzed with three parameters based on performance character: the retained flow number depending on critical permanent deformation failure (RFNP), the retained flow number depending on cohesion failure (RFNC), and energy ratio (ER). Analysis based on energy ratio of elastic strain (EREE ) at flow number of cohesion failure (FNC) has higher potential to evaluate the HMA moisture sensitivity than other parameters. If the measurement error in data-acquisition process is removed, analyses based on RFNP and RFNC would also have high potential to evaluate the HMA moisture sensitivity. The vacuum pressure saturation used in AASHTO T 283 and proposed test has a risk to damage specimen before the load applying.

Materials and Mix Optimization Procedures for PCC Pavements, March 2006

Severe environmental conditions, coupled with the routine use of deicing chemicals and increasing traffic volume, tend to place extreme demands on portland cement concrete (PCC) pavements. In most instances, engineers have been able to specify and build PCC pavements that met these challenges. However, there have also been reports of premature deterioration that could not be specifically attributed to a single cause. Modern concrete mixtures have evolved to become very complex chemical systems. The complexity can be attributed to both the number of ingredients used in any given mixture and the various types and sources of the ingredients supplied to any given project. Local environmental conditions can also influence the outcome of paving projects. This research project investigated important variables that impact the homogeneity and rheology of concrete mixtures. The project consisted of a field study and a laboratory study. The field study collected information from six different projects in Iowa. The information that was collected during the field study documented cementitious material properties, plastic concrete properties, and hardened concrete properties. The laboratory study was used to develop baseline mixture variability information for the field study. It also investigated plastic concrete properties using various new devices to evaluate rheology and mixing efficiency. In addition, the lab study evaluated a strategy for the optimization of mortar and concrete mixtures containing supplementary cementitious materials. The results of the field studies indicated that the quality management concrete (QMC) mixtures being placed in the state generally exhibited good uniformity and good to excellent workability. Hardened concrete properties (compressive strength and hardened air content) were also satisfactory. The uniformity of the raw cementitious materials that were used on the projects could not be monitored as closely as was desired by the investigators; however, the information that was gathered indicated that the bulk chemical composition of most materials streams was reasonably uniform. Specific minerals phases in the cementitious materials were less uniform than the bulk chemical composition. The results of the laboratory study indicated that ternary mixtures show significant promise for improving the performance of concrete mixtures. The lab study also verified the results from prior projects that have indicated that bassanite is typically the major sulfate phase that is present in Iowa cements. This causes the cements to exhibit premature stiffening problems (false set) in laboratory testing. Fly ash helps to reduce the impact of premature stiffening because it behaves like a low-range water reducer in most instances. The premature stiffening problem can also be alleviated by increasing the water–cement ratio of the mixture and providing a remix cycle for the mixture.

An investigation of the potential of DIP-STR markers for DNA mixture analyses

The genetic characterization of unbalanced mixed stains remains an important area where improvement is imperative. In fact, using the standard tools of forensic DNA profiling (i.e., STR markers), the profile of the minor contributor in mixed DNA stains cannot be successfully detected if its quantitative share of DNA is less than 10% of the mixed trace. This is due to the fact that the major contributor's profile "masks" that of the minor contributor. Besides known remedies to this problem, such as Y-STR analysis, a new compound genetic marker that consists of a Deletion/Insertion Polymorphism (DIP) linked to a Short Tandem Repeat (STR) polymorphism, has recently been developed and proposed [1]. These novel markers are called DIP-STR markers. This paper compares, from a statistical and forensic perspective, the potential usefulness of these novel DIP-STR markers (i) with traditional STR markers in cases of moderately unbalanced mixtures, and (ii) with Y-STR markers in cases of female-male mixtures. This is done through a comparison of the distribution of 100,000 likelihood ratio values obtained using each method on simulated mixtures. This procedure is performed assuming, in turn, the prosecution's and the defence's point of view.

Experimental design on the simplex

Optimum experimental designs depend on the design criterion, the model andthe design region. The talk will consider the design of experiments for regressionmodels in which there is a single response with the explanatory variables lying ina simplex. One example is experiments on various compositions of glass such asthose considered by Martin, Bursnall, and Stillman (2001).Because of the highly symmetric nature of the simplex, the class of models thatare of interest, typically Scheff´e polynomials (Scheff´e 1958) are rather differentfrom those of standard regression analysis. The optimum designs are also ratherdifferent, inheriting a high degree of symmetry from the models.In the talk I will hope to discuss a variety of modes for such experiments. ThenI will discuss constrained mixture experiments, when not all the simplex is availablefor experimentation. Other important aspects include mixture experimentswith extra non-mixture factors and the blocking of mixture experiments.Much of the material is in Chapter 16 of Atkinson, Donev, and Tobias (2007).If time and my research allows, I would hope to finish with a few comments ondesign when the responses, rather than the explanatory variables, lie in a simplex.ReferencesAtkinson, A. C., A. N. Donev, and R. D. Tobias (2007). Optimum ExperimentalDesigns, with SAS. Oxford: Oxford University Press.Martin, R. J., M. C. Bursnall, and E. C. Stillman (2001). Further results onoptimal and efficient designs for constrained mixture experiments. In A. C.Atkinson, B. Bogacka, and A. Zhigljavsky (Eds.), Optimal Design 2000,pp. 225–239. Dordrecht: Kluwer.Scheff´e, H. (1958). Experiments with mixtures. Journal of the Royal StatisticalSociety, Ser. B 20, 344–360.1

Érosion des sols au Cap Vert : étude des processus et quantification à l’échelle de trois bassins versants de l’île de Santiago

Erosão dos solos em Cabo Verde: estudo dos processos e quantificação à escala de três bacias hidrográficas O arquipélago de Cabo Verde é constituído por 10 ilhas vulcânicas pertence à zona do Sahel que se estende do Atlântico ao Mar Vermelho. Desde então, várias décadas, Cabo Verde é afectado pela desertificação causada principalmente pela recessão climatica e a erosão do solo. Esses fatores, aliados à alta pressão humana sobre os recursos, a topografia acidentada e chuvas tropicais por vezes torrenciais, causam sérios danos aos solos. No entanto, desde sua independência em 1975, o Governo realizou um amplo programa de arborização, recuperação de áreas degradadas e a correcção dos leitos das ribeiras. No entanto, a investigação, muito pouco foi realizada para avaliar as acções de protecção e conservação do solo e da água. Portanto, não há dados sobre o problema da degradação das terras nem balanços. Como parte deste trabalho, foram estudados vários factores que controlam a erosão do solo pela água. Especificamente, buscou-se diferenciar os efeitos das actividades humanas, incluindo a agricultura, os factores climáticos, como chuva e geração de escoamento. Também estabeleceu os primeiros balanços das exportações de matérias em suspensão e em solução no contexto do arquipélago de Cabo Verde. O estudo foi realizado em três bacias hidrográficas da ilha de Santiago, Cabo Verde. Estas três bacias hidrográficas (Longueira, Grande e Godim) estão localizadas na parte central da ilha de Santiago e representam os diversos tipos de uso da terra e as diferentes zonas bioclimaticas da ilha. Existe um gradiente climático entre as três bacias hidrográficas. Na verdade, Longueira que abrange uma área de 4,18 km2, tem um declive médio de 47 %, uma zona florestada de 69% e uma área agrícola de 17 %. Grande com uma área de 1,87 km2, é localizada numa zona sub humida com um declive médio de 50%, é essencialmente agrícola. Godim, com uma área de 2,0 km2, é localizado numa zona semi-árida com um declive médio de 32%, é particularmente uma zona agricola. Para estes três bacias hidrográficas, as cheias foram medidas e amostradas de 2004 a 2009. A bacia de Longueira teve um maior acompanhamento, nomeadamente em termos de amostragem e monitoramento dos escoamentos. Em cada amostra foram feitas a determinação da concentração de matérias em suspensão e a análise dos principais elementos quimicos. Os resultados mostram que a erosão mecânica nas três bacias hidrográficas é caracterizada por uma forte variabilidade espacial e temporal. Durante o período de 2005-2009, o balanço anual média para as bacias hidrográficas de Longueira, Grande e Godim é: 4266, 157 e 10,1 t.km2.an-1, respectivamente. A estação das chuvas de 2006 foi a mais erosiva para as três bacias, particularmente em Longueira, com 2 cheias excepcionais, que têm gerado uma concentração média de sólidos em suspensão superior a 100 g / l. Porém, as estações do ano de 2005 e 2008 foram de uma forma geral menos erosivas porque as concentrações médias não inferiores a 20 g / l. Além disso, não houve cheias para as temporadas 2005 e 2007 para a bacia do Godim. Na bacia de Longueira, o estudo dos fenómenos de histerese na caracterização das cheias mostrou que a evolução temporal das exportações de sólidos em suspensão durante a temporada é fortemente influenciada pelas atividades agrícolas. Na verdade, a primeira cheia causou uma exportação maciça de sedimento disponível e localizado no leito da ribeira. Assim, a segunda cheia exportou menos sedimentos. Um mês após as primeiras chuvas, a prática da monda que reduz a densidade da cobertura vegetal e destructura a camada superficial do solo, gerou uma grande quantidade de sedimento que novamente permitiu uma exportação muito forte de sedimentos durante a terceira forte cheia. Os resultados da erosão química na bacia de Longueira indicam que a taxa de erosão é de 45 t.km2.an-1 com uma forte variabilidade temporal. Na verdade, as temporadas de 2006 e 2007 são as mais erosivas, enquanto 2005 teve uma exportação de matérias disolvidas baixa. A utilização do modelo EMMA (End- Members Mixing Analysis) mostra que os escoamentos hipodermico e profundo, alimentandos os fluxos de elementos dissolvidos são os principais factores da erosão química. É mostrado que esses fluxos causam mais de 90% dos fluxos de erosão química. O escoamento superficial, que contribui com cerca de 70% na formação das cheias, é o maior factor da erosão mecânica do solo.

In vitro compatibility of remifentanil hydrochloride and sufentanil citrate with selected drugs

: Objectives Physicochemical incompatibilities between intravenous drugs are a recurrent problem in intensive care units. The present study was aimed at investigating the physical compatibility of remifentanil and sufentanil with other drugs (insulin, midazolam, propofol, potassium chloride, magnesium sulfate, furosemide, heparin, monobasic potassium phosphate) that are frequently administered together intravenously. In addition, the physicochemical compatibility of three common associations of drugs was evaluated in glass tube tests and during dynamic simulated Y site administrations (remifentanil-insulin-midazolam; remifentanil-insulin-propofol; sufentanil-insulin-midazolam). Methods Physical compatibility was verified by visual inspection of the various mixtures (two, three or four drugs) in glass tubes and by pH determination of the mixtures collected during simulated Y site administrations. Solutions were considered as compatible in the absence of any visual change in the solution and of any significant variation in pH value. In addition, chemical stability was checked during in vitro dynamic simulations. The solutions were prepared in 50 ml syringes, placed on syringe pumps and connected to a Swan-Ganz catheter; the liquid collected at the tip was assayed by high performance liquid chromatography. Results In the visual examinations, only the associations of remifentanil and furosemide were incompatible. The three assayed associations were compatible in the tested proportion range over 24 h. Conclusions Remifentanil was physically compatible with the tested drugs, except for furosemide (Lasix; Sanofi-Aventis, 250 mg/25 ml) and physicochemically compatible with insulin and midazolam and insulin and propofol. Sufentanil was physically compatible with all tested drugs and physicochemically compatible with insulin and midazolam

Current approaches and challenges for the metabolite profiling of complex natural extracts.

Metabolite profiling is critical in many aspects of the life sciences, particularly natural product research. Obtaining precise information on the chemical composition of complex natural extracts (metabolomes) that are primarily obtained from plants or microorganisms is a challenging task that requires sophisticated, advanced analytical methods. In this respect, significant advances in hyphenated chromatographic techniques (LC-MS, GC-MS and LC-NMR in particular), as well as data mining and processing methods, have occurred over the last decade. Together, these tools, in combination with bioassay profiling methods, serve an important role in metabolomics for the purposes of both peak annotation and dereplication in natural product research. In this review, a survey of the techniques that are used for generic and comprehensive profiling of secondary metabolites in natural extracts is provided. The various approaches (chromatographic methods: LC-MS, GC-MS, and LC-NMR and direct spectroscopic methods: NMR and DIMS) are discussed with respect to their resolution and sensitivity for extract profiling. In addition the structural information that can be generated through these techniques or in combination, is compared in relation to the identification of metabolites in complex mixtures. Analytical strategies with applications to natural extracts and novel methods that have strong potential, regardless of how often they are used, are discussed with respect to their potential applications and future trends.

Survey on batch-to-batch variation in spray paints: a collaborative study

This study represents the most extensive analysis of batch-to-batch variations in spray paint samples to date. The survey was performed as a collaborative project of the ENFSI (European Network of Forensic Science Institutes) Paint and Glass Working Group (EPG) and involved 11 laboratories. Several studies have already shown that paint samples of similar color but from different manufacturers can usually be differentiated using an appropriate analytical sequence. The discrimination of paints from the same manufacturer and color (batch-to-batch variations) is of great interest and these data are seldom found in the literature. This survey concerns the analysis of batches from different color groups (white, papaya (special shade of orange), red and black) with a wide range of analytical techniques and leads to the following conclusions. Colored batch samples are more likely to be differentiated since their pigment composition is more complex (pigment mixtures, added pigments) and therefore subject to variations. These variations may occur during the paint production but may also occur when checking the paint shade in quality control processes. For these samples, techniques aimed at color/pigment(s) characterization (optical microscopy, microspectrophotometry (MSP), Raman spectroscopy) provide better discrimination than techniques aimed at the organic (binder) or inorganic composition (fourier transform infrared spectroscopy (FTIR) or elemental analysis (SEM - scanning electron microscopy and XRF - X-ray fluorescence)). White samples contain mainly titanium dioxide as a pigment and the main differentiation is based on the binder composition (Csingle bondH stretches) detected either by FTIR or Raman. The inorganic composition (elemental analysis) also provides some discrimination. Black samples contain mainly carbon black as a pigment and are problematic with most of the spectroscopic techniques. In this case, pyrolysis-GC/MS represents the best technique to detect differences. Globally, Py-GC/MS may show a high potential of discrimination on all samples but the results are highly dependent on the specific instrumental conditions used. Finally, the discrimination of samples when data was interpreted visually as compared to statistically using principal component analysis (PCA) yielded very similar results. PCA increases sensitivity and could perform better on specific samples, but one first has to ensure that all non-informative variation (baseline deviation) is eliminated by applying correct pre-treatments. Statistical treatments can be used on a large data set and, when combined with an expert's opinion, will provide more objective criteria for decision making.

Erosão dos solos em Cabo Verde - Estudos dos Processos e Quantificação de Três Bacias na Ilha de Santiago

L’archipel du Cap Vert constitué de 10 îles volcaniques appartient à la zone sahélienne qui s’étend de l’atlantique jusqu’à la mer rouge. Depuis, plusieurs décennies le Cap Vert est affecté par la désertification causée en grande partie par la récession climatique et l’érosion des sols. Ces facteurs, associés à la forte pression anthropique sur les ressources, à l’orographie accidentée et à des pluies tropicales parfois diluviennes, provoquent de sérieuses pertes du patrimoine foncier. Cependant, depuis son Indépendance en 1975, le Gouvernement a mené un vaste programme d’arborisation, de restauration des terres et d’aménagement des cours d’eau. Pourtant, très peu de recherches ont été menées pour évaluer les actions de protection et de conservation des sols et des eaux. Par conséquent, il n’existe quasiment pas de données sur la problématique de la dégradation des terres ni de bilans. Dans le cadre de ce travail, nous avons étudié les différents facteurs qui contrôlent l’érosion hydrique des sols. Nous avons plus particulièrement cherché à différencier les effets des activités humaines, notamment agricoles, de ceux des facteurs climatiques comme les précipitations et la génération des écoulements. Nous avons également établi les premiers bilans d’exportations de matières en suspension et en solution dans le contexte de l’archipel du Cap Vert. L’étude a été menée à l’échelle de trois bassins versants de l’ile de Santiago Cap-Vert. Ces trois bassins versant (Longueira, Grande et Godim) sont localisés dans la partie centrale de l’île de Santiago et représentatifs des divers modes d’occupation du sol et des différents climats de l’île. Il existe un gradient climatique entre les trois bassins versants. En effet, Longueira qui présente une superficie de 4,18 km2, une pente moyenne de 47 %, se localise dans une zone humide couverte à 69 % par une forêt et une surface agricole de 17 %. Grande avec une superficie de 1,87 km2, se localise en zone sub humide pour une pente moyenne de 50 %, il est essentiellement agricole. Godim, avec une superficie de 2,0 km2, se localise en zone semi aride, il est particulièrement agricole et sa pente moyenne est de 32 %. Pour ces trois bassins versants, les écoulements de crue à l’exutoire ont été mesurés et échantillonnés de 2004 à 2009. Le bassin versant de Longueira a fait l’objet d’un suivi plus poussé, notamment en termes de fréquence d’échantillonnage et de suivi des écoulements hors crue. Sur chaque échantillon nous avons procédé à la détermination de la concentration des matières en suspension ainsi qu’à l’analyse des éléments majeurs. Les résultats obtenus montrent que l’érosion mécanique dans les 3 bassins versants est caractérisée par une forte variabilité spatiale et temporelle. Sur la période 2005-2009, le bilan moyen annuel pour les bassins versants de Longueira, Grande et Godim est de : 4266, 157 et 10,1 t.km2.an-1 respectivement. La saison humide 2006 a été la plus érosive pour l’ensemble des trois bassins versants et particulièrement dans Longueira avec 2 crues exceptionnelles qui ont généré une concentration moyenne de matières en suspension supérieure à 100 g/l. En revanche, les saisons 2005 et 2008 ont été dans l’ensemble peu érosives car les concentrations moyennes ne dépassèrent pas 20 g/l. Par ailleurs, il n’y a pas eu de lames d’eau écoulées pour les saisons 2005 et 2007 pour le bassin de Godim. Sur le bassin de Longueira, l’étude des phénomènes d’hystérésis permet de caractériser chaque crue et de montrer que l’évolution temporelle des exportations de matières en suspension au cours de la saison est fortement influencée par les activités agricoles. En effet, la première crue provoque l’exportation massive des sédiments disponibles et localisés dans le lit du cours d’eau. En conséquence, la seconde est moins exportatrice de sédiments. Un mois après les premières pluies, les activités de sarclage diminuent la densité du couvert végétal et destructurent la partie superficielle des sols, ce qui provoque à nouveau une très forte exportation de sédiments lors de la troisième crue. Les résultats de l’érosion chimique sur le bassin de Longueira indiquent que le taux d’érosion chimique moyen s’élève à 45 t.km2.an-1 avec une forte variabilité temporelle. En effet, les saisons les plus humides de 2006 et 2007 sont les plus exportatrices de matières en solution, alors que 2005 a eu une faible exportation. L’utilisation du modèle de mélanges EMMA (End-Members Mixing Analysis) montre que les écoulements hypodermique et profond, qui alimentent le cours d’eau en éléments dissous, sont les principaux facteurs de l’érosion chimique. On montre ainsi que les écoulements hors crue sont à l’origine de plus de 90% des flux d’érosion chimique. L’écoulement superficiel, qui contribue à environ 70 % du débit du cours d’eau en crue, constitue un facteur de premier plan de l’érosion mécanique des sols.

Hazardous substances in frequently used professional cleaning products.

A growing number of studies have identified cleaners as a group at risk for adverse health effects of the skin and the respiratory tract. Chemical substances present in cleaning products could be responsible for these effects. Currently, only limited information is available about irritant and health hazardous chemical substances found in cleaning products. We hypothesized that chemical substances present in cleaning products are known health hazardous substances that might be involved in adverse health effects of the skin and the respiratory tract. We performed a systematic review of cleaning products used in the Swiss cleaning sector. We surveyed Swiss professional cleaning companies (n = 1476) to identify the most used products (n = 105) for inclusion. Safety data sheets (SDSs) were reviewed and hazardous substances present in cleaning products were tabulated with current European and global harmonized system hazard labels. Professional cleaning products are mixtures of substances (arithmetic mean 3.5 +/- 2.8), and more than 132 different chemical substances were identified in 105 products. The main groups of chemicals were fragrances, glycol ethers, surfactants, solvents; and to a lesser extent, phosphates, salts, detergents, pH-stabilizers, acids, and bases. Up to 75% of products contained irritant (Xi), 64% harmful (Xn) and 28% corrosive (C) labeled substances. Hazards for eyes (59%) and skin (50%), and hazards by ingestion (60%) were the most reported. Cleaning products potentially give rise to simultaneous exposures to different chemical substances. As professional cleaners represent a large workforce, and cleaning products are widely used, it is a major public health issue to better understand these exposures. The list of substances provided in this study contains important information for future occupational exposure assessment studies.

Indirect hydrogen monitoring by chemi-ionisation following an associative ionisation pathway after metastable helium atoms production by electron impact ionisation: Protonation and deuteration of carrier gas

Gas chromatography (GC) is an analytical tool very useful to investigate the composition of gaseous mixtures. However, hydrogen (H2) detection after a GC separation is only possible with a Thermal Conductivity Detector (TCD), a Helium Ionisation Detector (HID) or expensive Atomic Emission Detector (AED). Recently, indirect H2 detection by GC coupled to mass spectrometry (MS) was demonstrated but the mechanism of carrier gas protonation remained unclear. With electron impact as ionisation source of MS and helium (He) as GC carrier gas, H2 is not ionised according the expected Penning ionisation neither according to the Associative ionisation. Rearrangement ionisation (RI) was found to be the main channel for H2 and D2 ionisation under GC-MS conditions used in most of laboratories using GC-MS, leading to the formation of [He−H]+ and [He−D]+ ions.