Relationships between secchi disk visibility, water temperature and dissolved oxygen in freshwater fishpond

A study was conducted to determine the relationships between secchi disk variability, water temperature and dissolved oxygen in fish ponds. Multiple regression correlation analysis was done to evaluate the relationships between the variables. Results indicated that the ranges of secchi disk visibility, water temperature and dissolved oxygen in the study ponds were just within the ranges of the variables for tilapia culture. Multiple regression correlation showed no (or insignificant) relationships with dissolved oxygen and water temperature, dissolved oxygen with secchi disk visibility and water temperature with secchi disk visibility.

Supply of Astaxanthin and its combinations through live feed (Moina micrura) enrichment affects the growth, survival and fatty acid profile of Macrobrachium rosenbergii larvae

A study was carried out with three replicates to determine the effects of feeding Moina micrura enriched with astaxanthin alone (M1) or astaxanthin in combination with either vitamin E (M2), vitamin D (M3) or Cod Liver oil (M4) on the growth, survival and fatty acid composition of giant fresh water prawn Macrobrachium rosenbergii (de Man) larvae. Growth rate was expressed as the time taken to the settlement of 95% post larvae. Maximum growth, the lowest time taken to the 95% PL settlement (38.5±0.50 days), was observed in larvae fed with M3 Moina. The highest survival rate (66.0±1.00%) was observed in those fed with M4 Moina and the second highest survival (61.0±1.00%) and growth rates (40.0±0.00 days) were shown with M2 Moina. The minimum values for both growth (42.5±0.50 days) and survival (33.0±1.50%) were observed in the group fed un-enriched Moina. Results also showed that the survival of prawn larvae increased as the quantities of eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA) increased in the dietary Moina. The highest levels of EPA (5.57±0.21%), DHA (3.50±0.21%) and highest total Highly Unsaturated Fatty Acids (HUFA) (13.87±0.68%) were seen in the Moina fed on astaxanthin and Cod Liver Oil (CLO). The results of the study showed that the nutritive quality of Moina, with respect to important fatty acids, can be increased by enrichment and will influence the growth, survival and the fatty acid composition of fresh water prawn larvae fed on them.

Enhancement of GABAA Receptor-Mediated Inhibitory Postsynaptic Currents Induced by "Partial Oxygen-Glucose Deprivation

下载PDF阅读器"氧糖剥夺"模型作为研究脑缺血的离体模型被广泛使用,该模型模拟了局灶性脑缺血的主要病理变化.然而在缺血病灶核心区与正常脑组织之间称为缺血半暗带的区域,脑血流也有程度不一的降低.为了模拟这种病理变化,发展了一种"不完全氧糖剥夺"的离体脑片模型,该模型满足两个条件,灌流液里氧气部分剥夺而葡萄糖含量降低;"氧糖剥夺"可以导致谷氨酸介导的兴奋性毒性,从而引起神经细胞的坏死.而A型γ-氨基丁酸受体(GABAAR)介导的神经元抑制性活动可以对抗谷氨酸引起的兴奋性毒性,因此近年来引起广泛的研究兴趣.而谷氨酸受体和γ-氨基丁酸受体功能在缺血半暗带是否有改变尚不得而知.因此本文采用海马脑片全细胞膜片钳的记录方法,研究"不完全氧糖剥夺"对海马CA1区神经元的A型γ-氨基丁酸受体介导的抑制性突触后膜电流(IPSCs)的影响.研究发现"不完全氧糖剥夺"使GABAAR介导的IPSCs的峰值增加而衰减时程延长.进一步研究发现该电流的峰值增加是由于GABAAR-氯离子通道的电导增加所致,而与氯离子的反转电位变化无关.这些发现提示在脑缺血的缺血半暗带区域GABAAR介导的神经元抑制性活动可能是增强的,这可能是神经元面对缺血状态产生自我保护的一种内稳态机制.

Exploring geographical dispersion in Thailand-based food supply chain (FSC)

Purpose: The purpose of this paper is to explore the key influential factors and their implications on food supply chain (FSC) location decisions from a Thailand-based manufacturer's view. Design/methodology/approach: In total, 21 case studies were conducted with eight Thailand-based food manufacturers. In each case, key influential factors were observed along with their implications on upstream and downstream FSC location decisions. Data were collected through semi-structured interviews and documentations. Data reduction and data display in tables were used to help data analysis of the case studies. Findings: This exploratory research found that, in the food industry, FSC geographical dispersion pattern could be determined by four factors: perishability, value density, economic-political forces, and technological forces. Technological forces were found as an enabler for FSC geographical dispersion whereas the other three factors could be both barriers and enablers. The implications of these four influential factors drive FSC towards four key patterns of FSC geographical dispersion: local supply chain (SC), supply-proximity SC, market-proximity SC, and international SC. Additionally, the strategy of the firm was found to also be an influential factor in determining FSC geographical dispersion. Research limitations/implications: Despite conducting 21 cases, the findings in this research are based on a relatively small sample, given the large size of the industry. More case evidence from a broader range of food product market and supply items, particularly ones that have significantly different patterns of FSC geographical dispersions would have been insightful. The consideration of additional influential factors such as labour movement between developing countries, currency fluctuations and labour costs, would also enrich the framework as well as improve the quality and validity of the research findings. The different strategies employed by the case companies and their implications on FSC location decisions should also be further investigated along with cases outside Thailand, to provide a more comprehensive view of FSC geographical location decisions. Practical implications: This paper provides insights how FSC is geographically located in both supply-side and demand-side from a manufacturing firm's view. The findings can also provide SC managers and researchers a better understanding of their FSCs. Originality/value: This research bridges the existing gap in the literature, explaining the geographical dispersion of SC particularly in the food industry where the characteristics are very specific, by exploring the internationalization ability of Thailand-based FSC and generalizing the key influential factors - perishability (lead time), value density, economic-political forces, market opportunities, and technological advancements. Four key patterns of FSC internationalization emerged from the case studies. © Emerald Group Publishing Limited.

Low temperature (< 100 °c) deposited P-type cuprous oxide thin films: Importance of controlled oxygen and deposition energy

With the emergence of transparent electronics, there has been considerable advancement in n-type transparent semiconducting oxide (TSO) materials, such as ZnO, InGaZnO, and InSnO. Comparatively, the availability of p-type TSO materials is more scarce and the available materials are less mature. The development of p-type semiconductors is one of the key technologies needed to push transparent electronics and systems to the next frontier, particularly for implementing p-n junctions for solar cells and p-type transistors for complementary logic/circuits applications. Cuprous oxide (Cu2O) is one of the most promising candidates for p-type TSO materials. This paper reports the deposition of Cu2O thin films without substrate heating using a high deposition rate reactive sputtering technique, called high target utilisation sputtering (HiTUS). This technique allows independent control of the remote plasma density and the ion energy, thus providing finer control of the film properties and microstructure as well as reducing film stress. The effect of deposition parameters, including oxygen flow rate, plasma power and target power, on the properties of Cu2O films are reported. It is known from previously published work that the formation of pure Cu2O film is often difficult, due to the more ready formation or co-formation of cupric oxide (CuO). From our investigation, we established two key concurrent criteria needed for attaining Cu2O thin films (as opposed to CuO or mixed phase CuO/Cu2O films). First, the oxygen flow rate must be kept low to avoid over-oxidation of Cu2O to CuO and to ensure a non-oxidised/non-poisoned metallic copper target in the reactive sputtering environment. Secondly, the energy of the sputtered copper species must be kept low as higher reaction energy tends to favour the formation of CuO. The unique design of the HiTUS system enables the provision of a high density of low energy sputtered copper radicals/ions, and when combined with a controlled amount of oxygen, can produce good quality p-type transparent Cu2O films with electrical resistivity ranging from 102 to 104 Ω-cm, hole mobility of 1-10 cm2/V-s, and optical band-gap of 2.0-2.6 eV. These material properties make this low temperature deposited HiTUS Cu 2O film suitable for fabrication of p-type metal oxide thin film transistors. Furthermore, the capability to deposit Cu2O films with low film stress at low temperatures on plastic substrates renders this approach favourable for fabrication of flexible p-n junction solar cells. © 2011 Elsevier B.V. All rights reserved.

The role of satellite lakes in conservation of fish species diversity in the Lake Kyoga basin

Lakes Victoria and Kyoga had, a diverse fish fauna, which was important as food for local population and valuable in scientific studies. Over the past twenty years, the diversity of fish in these lakes had declined due to over-exploitation, introduction of new fish species including the piscivorous Nile perch and degradation of fish habitat. Studies of satellite lakes in the Victoria and Kyoga lake basins suggested that some of these lakes harboured species which had been lost from the main lakes. In order to better understand the extent, to which these satellite lakes may serve as refugia, a faunal survey was undertaken to determine the distribution and nature of the taxa found. Seven satellite lakes and the eastern end of the main Lake Kyoga adjacent to these minor lakes were surveyed over a two-year period for fish species diversity. A total of 68 fish species were recorded of which 41 were haplochromines. Almost all the native non cichlids which occurred in the main lakes (Victoria and Kyoga) before the Nile perch upsurge recorded. Lakes Nawampasa, Gigati, Kawi, Agu and Nyaguo had the highest fish species and trophic diversity. The trophic diversity of haplochromines (based on Shannon Weaver Index) was highest in Lake Nawampasa (1.28), followed by Gigati (1.25), Kawi (1.18), Agu (0.8), Lemwa (0.81), Nyaguo (0.35) and was lowest in the main Lake Kyoga. Potential threats to these lakes were from collectors of ornamental fish species, especially the haplochromines, the spread of the predatory Nile perch and the water hyacinth, which are already in Lake Kyoga, and the destruction of macrophytes through harvesting of papyrus and reclamation for agriculture. The human population around these lakes harvested the fishes for food but the levels of exploitation were still low because the lakes were adjacent to main Lake Kyoga, the major supply of fish. Ornamental fish dealers were encouraged to start captive breeding of the fish for export to reduce pressure on the lakes and demonstrations for breeding were set up at FIRI in Jinja. Meetings and seminars were held with some of the communities living around the lakes sampled and the importance of fish species found in these lakes and the dangers of destructive practices discussed. Representatives of all taxa of fish caught from the lakes were preserved, catalogued and stored in the FIRI Museum. Results from this survey support the motion that these satellite lakes are important refugia for endemic diversity. Based on survey, we recommend that SaIne of these lakes like Nawampasa, Gigati, Kawi, Agu and Nyaguo could be designated as conservation areas of species threatened in the main lakes. One of the factors that seem to have prevented the spread of Nile perch into Kyoga Minor lakes seems to have been the presence of extensive swamps around these lakes and the low oxygen levels that exist in these habitats. Clearing of swamps and vegetation that separate Kyoga minor lakes from the main lake should be avoided to prevent Nile perch from spreading into these lakes.

Product Service Systems and supply network relationships: An exploratory case study

Purpose - In recent years there has been increasing interest in Product Service Systems (PSSs) as a business model for selling integrated product and service offerings. To date, there has been extensive research into the benefits of PSS to manufacturers and their customers, but there has been limited research into the effect of PSS on the upstream supply chain. This paper seeks to address this gap in the research. Design/methodology/approach - The research uses case-based research which is appropriate for exploratory research of this type. In-depth interviews were conducted with key personnel in a focal firm and two members of its supply chain, and the results were analysed to identify emergent themes.b Findings - The research has identified differences in supplier behaviour dependent on their role in PSS delivery and their relationship with the PSS provider. In particular, it suggests that for a successful partnership it is important to align the objectives between PSS provider and suppliers. Originality/value - This research provides a detailed investigation into a PSS supply chain and highlights the complexity of roles and relationships among the organizations within it. It will be of value to other PSS researchers and organizations transitioning to the delivery of PSS. © Emerald Group Publishing Limited.