Diversity, culture, leadership, performance:a performance-oriented model to leading across differences and managing internationalization processes

DUE TO COPYRIGHT RESTRICTIONS ONLY AVAILABLE FOR CONSULTATION AT ASTON UNIVERSITY LIBRARY AND INFORMATION SERVICES WITH PRIOR ARRANGEMENT

Development of a risk-oriented strategic sourcing (ROSS) framework for the construction and electronics manufacturing industries

Strategic sourcing has increased in importance in recent years, and now plays an important role in companies’ planning. The current volatility in supply markets means companies face multiple challenges involving lock-in situations, supplier bankruptcies or supply security issues. In addition, their exposure can increase due to natural disasters, as witnessed recently in the form of bird flu, volcanic ash and tsunamis. Therefore, the primary focus of this study is risk management in the context of strategic sourcing. The study presents a literature review on sourcing based on the 15 years from 1998–2012, and considers 131 academic articles. The literature describes strategic sourcing as a strategic, holistic process in managing supplier relationships, with a long-term focus on adding value to the company and realising competitive advantage. Few studies discovered the real risk impact and status of risk management in strategic sourcing, and evaluation across countries and industries was limited, with the construction sector particularly under-researched. This methodology is founded on a qualitative study of twenty cases across Ger-many and the United Kingdom from the construction sector and electronics manufacturing industries. While considering risk management in the context of strategic sourcing, the thesis takes into account six dimensions that cover trends in strategic sourcing, theoretical and practical sourcing models, risk management, supply and demand management, critical success factors and the strategic supplier evaluation. The study contributes in several ways. First, recent trends are traced and future needs identified across the research dimensions of countries, industries and companies. Second, it evaluates critical success factors in contemporary strategic sourcing. Third, it explores the application of theoretical and practical sourcing models in terms of effectiveness and sustainability. Fourth, based on the case study findings, a risk-oriented strategic sourcing framework and a model for strategic sourcing are developed. These are based on the validation of contemporary requirements and a critical evaluation of the existing situation. It contemplates the empirical findings and leads to a structured process to manage risk in strategic sourcing. The risk-oriented framework considers areas such as trends, corporate and sourcing strategy, critical success factors, strategic supplier selection criteria, risk assessment, reporting, strategy alignment and reporting. The proposed model highlights the essential dimensions in strategic sourcing and guides us to a new definition of strategic sourcing supported by this empirical study.

Investigation of two-wave mixing in arbitrary oriented sillenite crystals

A generalized systematic description of the Two-Wave Mixing (TWM) process in sillenite crystals allowing for arbitrary orientation of the grating vector is presented. An analytical expression for the TWM gain is obtained for the special case of plane waves in a thin crystal (|g|d«1) with large optical activity (|g|/?«1, g is the coupling constant, ? the rotatory power, d the crystal thickness). Using a two-dimensional formulation the scope of the nonlinear equations describing TWM can be extended to finite beams in arbitrary geometries and to any crystal parameters. Two promising applications of this formulation are proposed. The polarization dependence of the TWM gain is used for the flattening of Gaussian beam profiles without expanding them. The dependence of the TWM gain on the interaction length is used for the determination of the crystal orientation. Experiments carried out on Bi12GeO20 crystals of a non-standard cut are in good agreement with the results of modelling.

A modified semi-oriented radial measure for target setting with negative data

Over the last few years Data Envelopment Analysis (DEA) has been gaining increasing popularity as a tool for measuring efficiency and productivity of Decision Making Units (DMUs). Conventional DEA models assume non-negative inputs and outputs. However, in many real applications, some inputs and/or outputs can take negative values. Recently, Emrouznejad et al. [6] introduced a Semi-Oriented Radial Measure (SORM) for modelling DEA with negative data. This paper points out some issues in target setting with SORM models and introduces a modified SORM approach. An empirical study in bank sector demonstrates the applicability of the proposed model. © 2014 Elsevier Ltd. All rights reserved.

An aspect oriented performance analysis environment

AOSD'03 Practitioner Report Performance analysis is motivated as an ideal domain for benefiting from the application of Aspect Oriented (AO) technology. The experience of a ten week project to apply AO to the performance analysis domain is described. We show how all phases of a performance analysts’ activities – initial profiling, problem identification, problem analysis and solution exploration – were candidates for AO technology assistance – some being addressed with more success than others. A Profiling Workbench is described that leverages the capabilities of AspectJ, and delivers unique capabilities into the hands of developers exploring caching opportunities.

Electrografting of poly (carbazole-co-acrylamide) onto highly oriented pyroltic graphite. A cyclovoltammetric, atomic force microscopic and ellipsometric study

The electrocopolymerization of carbazole and acrylamide on highly oriented pyrolytic graphite (HOPG) from ACN solutions via cyclovoltammetry (CV) was studied in order to evaluate the possibility to deposit uniform and thin but pinhole-free and still reactive coatings onto graphite-like substrates. The morphology of the coatings was investigated using atomic force microscopy and the coating thicknesses and optical parameters were measured using ellipsometry. It was found that under the chosen conditions thin (coating thickness hf>180 nm) and relatively smooth (root mean square surface roughness RMS<150 nm) P(Cz-co-AAm)-coatings exhibiting a uniform globuoidal morphology can be deposited onto graphite. From a certain coating thickness (hf>50 nm) no pinholes could be detected. It was found that the thickness of the deposited coatings increases almost linearly with increasing number of CV-cycles while keeping all other experimental parameters (scan rate and comonomer concentration ratio) constant. No influence of the comonomer concentration ratio on the film thickness and coating appearance could be observed, however, at quite low initial concentrations. However, the CV-scanning rate has quite a significant influence on the thickness of the deposited coatings. Higher scan rates (100 mV/s) result in thin (hf≈22 nm) coatings whereas at lower scan rates (<50 mV/s) coatings with thicknesses of approximately 50 nm were obtained. The optical coating parameters (the refractive index n and extinction coefficient k) seem to be independent of the deposition parameters and therefore averaged values of n̄=1.54±0.03 and k̄=0.08±0.03 were obtained.

Adaptation of a Task-oriented Training Environment to its Users

The problem of adapting teaching systems to the teacher has not been extensively covered in the specialised literature. The authors present the server-client architecture of a Task-Oriented Environment for Design of Virtual Labs (TOEDVL). The paper focuses on the computational models supporting its base of tasks (BT) and on two groups of behavioural tutor’s models for planning training sessions. Detailed examples are presented.

A stage-oriented model (SOM) for e-commerce adoption:a study of Saudi Arabian organisations

Purpose - The purpose of this paper is to construct a new e-commerce innovation and adoption model that takes into account various stages of e-commerce adoption (interactive, non-interactive and stabilised) and covers technological, organisational and environmental factors. This was tested using data collected from manufacturing and service companies in Saudi Arabia (SA) to reveal inhibitors and catalysts for e-commerce adoption. Design/methodology/approach - This study uses new data from surveys from 202 companies and then uses exploratory factor analysis and structural equation modelling for analyses. Findings - This study shows that the new stage-oriented model (SOM) is valid and can reveal specific detailed nuances of e-commerce adoption within a particular setting. Surprising results show that SA is not so very different to developed western countries in respect to e-commerce adoption. However there are some important differences which are discussed in detail. Research limitations/implications - A new SOM for e-commerce adoption is provided which may be used by other IS adoption researchers. Practical implications - Managers responsible for the adoption of e-commerce in SA, the Middle East and beyond can learn from these findings to speed up adoption rates and make e-commerce more effective. Social implications - This work may help spread e-commerce use throughout SA, the Middle East and to other developing nations. Originality/value - The results add to the extremely limited number of empirical studies that has been conducted to investigate e-commerce adoption in the context of Arabic countries.

A Semantic-Oriented Architecture of a Functional Module for Personalized and Adaptive Access to the Knowledge in a Multimedia Digital Library

This article presents the principal results of the doctoral thesis “Semantic-oriented Architecture and Models for Personalized and Adaptive Access to the Knowledge in Multimedia Digital Library” by Desislava Ivanova Paneva-Marinova (Institute of Mathematics and Informatics), successfully defended before the Specialised Academic Council for Informatics and Mathematical Modelling on 27 October, 2008.

Bridging the Gap Between Human Language and Computer-Oriented Representations

Information can be expressed in many ways according to the different capacities of humans to perceive it. Current systems deals with multimedia, multiformat and multiplatform systems but another « multi » is still pending to guarantee global access to information, that is, multilinguality. Different languages imply different replications of the systems according to the language in question. No solutions appear to represent the bridge between the human representation (natural language) and a system-oriented representation. The United Nations University defined in 1997 a language to be the support of effective multilinguism in Internet. In this paper, we describe this language and its possible applications beyond multilingual services as the possible future standard for different language independent applications.

XML Editors Overview and the Challenge to Build XML-Oriented Editor for Mediaeval Manuscript Descriptions

* The research presented here is partially supported by the project KT-DigiCult-Bg (FP6) and by the ICT Agency in Bulgaria.

From an Ontology-Oriented Approach Conception to User Interface Development

* The presented work has discussed on the KDS-2003. It has corrected in compliance with remarks and requests of participants.

A Knowledge-Oriented Technology of System-Objective Analysis and Modelling of Business-Systems

A new original method and CASE-tool of system analysis and modelling are represented. They are for the first time consistent with the requirements of object-oriented technology of informational systems design. They essentially facilitate the construction of organisational systems models and increase the quality of the organisational designing and basic technological processes of object application developing.

Case-Based Reasoning Tools from Shells to Object-Oriented Frameworks

A Case-Based Reasoning (CBR) tool is software that can be used to develop several applications that require cased-based reasoning methodology. CBR shells are kind of application generators with graphical user interface. They can be used by non-programmer users but the extension or integration of new components in these tools is not possible. In this paper we analyzed three CBR object-oriented framework development environments CBR*Tools, CAT-CBR, and JColibri. These frameworks work as open software development environment and facilitate the reuse of their design as well as implementations.

An UML Project of a Task-Oriented Environment for Teaching Algorithms

This paper continues the author’s team research on development, implementation, and experimentation of a task-oriented environment for teaching and learning algorithms. This environment is a part of a large-scale environment for course teaching in different domains. The paper deals only with the UML project of the teaching team’s side of the environment.. The implementation of the project ideas is demonstrated on a WINDOWS-based environment’s prototype.