A Modular and digitally programmable interface based on band-pass sigma-delta modulator for mixed-signal systems-on-chip

The focus of this thesis is to discuss the development and modeling of an interface architecture to be employed for interfacing analog signals in mixed-signal SOC. We claim that the approach that is going to be presented is able to achieve wide frequency range, and covers a large range of applications with constant performance, allied to digital configuration compatibility. Our primary assumptions are to use a fixed analog block and to promote application configurability in the digital domain, which leads to a mixed-signal interface. The use of a fixed analog block avoids the performance loss common to configurable analog blocks. The usage of configurability on the digital domain makes possible the use of all existing tools for high level design, simulation and synthesis to implement the target application, with very good performance prediction. The proposed approach utilizes the concept of frequency translation (mixing) of the input signal followed by its conversion to the ΣΔ domain, which makes possible the use of a fairly constant analog block, and also, a uniform treatment of input signal from DC to high frequencies. The programmability is performed in the ΣΔ digital domain where performance can be closely achieved according to application specification. The interface performance theoretical and simulation model are developed for design space exploration and for physical design support. Two prototypes are built and characterized to validate the proposed model and to implement some application examples. The usage of this interface as a multi-band parametric ADC and as a two channels analog multiplier and adder are shown. The multi-channel analog interface architecture is also presented. The characterization measurements support the main advantages of the approach proposed.

Sinergias nas fusões e aquisições do setor de educação superior no Brasil

Fusões e aquisições são um fenômeno relevante na economia e estão se tornando cada vez mais presentes no Brasil também. Entre os diferentes setores econômicos nos quais a estratégia de crescimento aquisitivo tem sido implementadas, a educação superior privada merece destaque, não apenas pela frequência de transações, mas também pelo porte de algumas delas, colocando as empresas líderes do mercado brasileiro entre as maiores instituições do mundo. O presente trabalho objetiva entender por que essas empresa têm adotado tal estratégia, ao invés de simplesmente se basearem no crescimento orgânico. A tentativa de responder a essa questão levou à proposta de uma hipótese que sugere que existem motivações econômicas para a ocorrência deste fato. Em outras palavras, a hipótese que o trabalho busca testar é que existem sinergias nas transações realizadas no setor de educação superior no Brasil, bem como que estas sinergias têm sido convertidas em ganhos econômicos para as empresas adquirentes e para os seus acionistas. Para tanto, o presente trabalho primeiramente apresenta uma revisão da literatura do tema de fusões e aquisição e também uma visão sobre o setor brasileiro de educação superior, incluindo sua evolução, regulamentação e outras informações relevantes para apoiar um entendimento mais profundo sobre o fenômeno estudado. Em seguida, baseando-se na metodologia proposta, o trabalho foca no teste de sua hipótese, através da identificação das sinergias específicas presentes no setor e nas empresas selecionadas (Anhanguera, Estácio e Kroton) e da análise de como estas sinergias estão sendo traduzidas em seus resultados econômicos. Finalmente, com base nas evidências geradas por tais discussões, são providas conclusões relativas à veracidade da hipótese.

Propaganda enganosa e persuasão : reação do consumidor e proposta de políticas públicas

A propaganda vem se difundindo de formas as mais variadas há muito tempo. Não é incomum, entretanto, que em vez de ser usada para transmitir informações e características do que é anunciado, haja empresas que fazem uso de ludíbrio e engodo em suas peças publicitárias a fim de persuadir os potenciais consumidores de uma maneira condenável em termos éticos. Esta tese analisa a reação dos consumidores quando expostos a propagandas enganosas, comparando-a à daqueles que foram expostos a propagandas sem engodo, por meio de experimentos em que 359 indivíduos foram pesquisados e hipóteses testadas, com testes de média entre duas populações e o uso da Escala de Wells, analisando ainda os argumentos de publicitários e de um representante do CONAR a respeito da atuação dos profissionais desta área. Os resultados indicam que os publicitários não se baseiam em um código de conduta para a criação de propagandas visando ao respeito ao cliente; eles indicam que se algo lesivo ou enganoso tiver sido divulgado, isto é devido ao fato de seu cliente ter fornecido um briefing inadequado. Não há, aparentemente, questionamentos dos publicitários sobre a veracidade daquilo que o cliente lhes transmite ao solicitar a concepção de uma propaganda. Com relação aos consumidores, percebe-se que a maioria não conhece as obrigações do CONAR nem leu o Código de Defesa do Consumidor. Eles creem que empresas com maior reputação apresentam mais credibilidade em relação ao que transmitem em suas propagandas, e confundem artifícios legais com enganosos. A maioria dos consumidores que já foi enganada por uma propaganda nunca agiu contra a empresa responsável após ter percebido o que ocorrera. Os principais artifícios usados em propagandas foram testados, tendo sido possível perceber que, ainda que não interfiram em grande magnitude na intenção de compra, são responsáveis por confundir em diversas situações os consumidores, como observado nos casos do uso das expressões “apenas”, “a partir de” e no uso de letras miúdas para “fornecer” informações. As políticas públicas propostas servem para organizar os achados desta tese e o que já foi publicado na literatura sobre o tema, visando a recomendar formas de se educar os consumidores, de se agir em prol de uma sociedade em que propagandas enganosas não sejam algo tão corriqueiro e de punir e controlar aquilo que é divulgado em mensagens que a cada momento atingem uma enorme quantidade de indivíduos, influenciando suas decisões de compra.

A produção orgânica de citros no Vale do Rio Caí/RS

Há uma preocupação crescente sobre a necessidade de produção e consumo de alimentos mais saudáveis, sem uso de agrotóxicos nem fertilizantes químicos. Neste contexto se insere a prática da agricultura orgânica que, contudo, apresenta resultados ainda pouco avaliados. Assim, pretendeu-se, nesta pesquisa diagnosticar a produção orgânica na região citrícola do Vale do Rio Caí, no Rio Grande do Sul. Inicialmente foram selecionadas propriedades de oito agricultores, todas já convertidas ao sistema orgânico de produção há pelo menos cinco anos. Para tanto foram aplicadas entrevistas semi-estruturadas junto às unidades familiares, visando diagnosticar os aspectos sociais, econômicos e técnicoambientais. Os agricultores orgânicos mostram-se satisfeitos com o sistema orgânico de produção, que de maneira geral proporciona boas produtividades com custos de produção menores do que no sistema convencional de cultivo. Os agricultores que se dedicam ao sistema orgânico de produção revelam bom conhecimento sobre o meio ambiente, plantas, solos e processos agroecológicos, aspectos políticos, econômicos e sociais, adquiridos através da participação em cursos, palestras, congressos, dias de campo, treinamentos, e através das reuniões e assembléias da Cooperativa ECOCITRUS. A constante troca de experiências entre os agricultores orgânicos tem contribuído na melhoria da qualificação técnica dos produtores, além de melhor conscientizá-los nos aspectos políticos, econômicos e sociais. A participação dos produtores na ECOCITRUS tem proporcionado melhor organização dos mesmos, contribuindo na viabilização da produção orgânica, inclusive com vantagens econômicocomerciais, pela obtenção de insumos orgânicos, venda da produção e estímulo ao beneficiamento da produção, visando agregar renda à propriedade.

Diagnóstico ecotoxicológico dos efluentes lançados no complexo estuarino do Jundiaí/Potengi, Natal/RN

Untreated effluents that reach surface water affect the aquatic life and humans. This study aimed to evaluate the wastewater s toxicity (municipal, industrial and shrimp pond effluents) released in the Estuarine Complex of Jundiaí- Potengi, Natal/RN, through chronic quantitative e qualitative toxicity tests using the test organism Mysidopsis Juniae, CRUSTACEA, MYSIDACEA (Silva, 1979). For this, a new methodology for viewing chronic effects on organisms of M. juniae was used (only renewal), based on another existing methodology to another testorganism very similar to M. Juniae, the M. Bahia (daily renewal).Toxicity tests 7 days duration were used for detecting effects on the survival and fecundity in M. juniae. Lethal Concentration 50% (LC50%) was determined by the Trimmed Spearman-Karber; Inhibition Concentration 50% (IC50%) in fecundity was determined by Linear Interpolation. ANOVA (One Way) tests (p = 0.05) were used to determinate the No Observed Effect Concentration (NOEC) and Low Observed Effect Concentration (LOEC). Effluents flows were measured and the toxic load of the effluents was estimated. Multivariate analysis - Principal Component Analysis (PCA) and Correspondence Analysis (CA) - identified the physic-chemical parameters better explain the patterns of toxicity found in survival and fecundity of M. juniae. We verified the feasibility of applying the only renewal system in chronic tests with M. Juniae. Most efluentes proved toxic on the survival and fecundity of M. Juniae, except for some shrimp pond effluents. The most toxic effluent was ETE Lagoa Aerada (LC50, 6.24%; IC50, 4.82%), ETE Quintas (LC50, 5.85%), Giselda Trigueiro Hospital (LC50, 2.05%), CLAN (LC50, 2.14%) and COTEMINAS (LC50, IC50 and 38.51%, 6.94%). The greatest toxic load was originated from ETE inefficient high flow effluents, textile effluents and CLAN. The organic load was related to the toxic effects of wastewater and hospital effluents in survival of M. Juniae, as well as heavy metals, total residual chlorine and phenols. In industrial effluents was found relationship between toxicity and organic load, phenols, oils and greases and benzene. The effects on fertility were related, in turn, with chlorine and heavy metals. Toxicity tests using other organisms of different trophic levels, as well as analysis of sediment toxicity are recommended to confirm the patterns found with M. Juniae. However, the results indicate the necessity for implementation and improvement of sewage treatment systems affluent to the Potengi s estuary

Determinação de motivos de ligação à quitina em vicilinas de Canavalia ensiformis e Vigna unguiculata através de métodos in silico e relação com suas toxicidades para o bruquídeo Callosobruchus maculatus (Coleoptera:Bruchidae)

Chitin is an important structural component of the cellular wall of fungi and exoskeleton of many invertebrate plagues, such as insects and nematodes. In digestory systems of insects it forms a named matrix of peritrophic membrane. One of the most studied interaction models protein-carbohydrate is the model that involves chitin-binding proteins. Among the involved characterized domains already in this interaction if they detach the hevein domain (HD), from of Hevea brasiliensis (Rubber tree), the R&R consensus domain (R&R), found in cuticular proteins of insects, and the motif called in this study as conglicinin motif (CD), found in the cristallography structure of the β-conglicinin bounded with GlcNac. These three chitin-binding domains had been used to determine which of them could be involved in silico in the interaction of Canavalia ensiformis and Vigna unguiculata vicilins with chitin, as well as associate these results with the WD50 of these vicilins for Callosobruchus maculatus larvae. The technique of comparative modeling was used for construction of the model 3D of the vicilin of V. unguiculata, that was not found in the data bases. Using the ClustalW program it was gotten localization of these domains in the vicilins primary structure. The domains R&R and CD had been found with bigger homology in the vicilins primary sequences and had been target of interaction studies. Through program GRAMM models of interaction ( dockings ) of the vicilins with GlcNac had been gotten. The results had shown that, through analysis in silico, HD is not part of the vicilins structures, proving the result gotten with the alignment of the primary sequences; the R&R domain, although not to have structural similarity in the vicilins, probably it has a participation in the activity of interaction of these with GlcNac; whereas the CD domain participates directly in the interaction of the vicilins with GlcNac. These results in silico show that the amino acid number, the types and the amount of binding made for the CD motif with GlcNac seem to be directly associates to the deleterious power that these vicilins show for C. maculatus larvae. This can give an initial step in the briefing of as the vicilins interact with alive chitin in and exert its toxic power for insects that possess peritrophic membrane

Estudo da sinterização do aço inox 316L reforçado com 3% Carbeto de Tântalo - TaC

The present work shows a contribution to the studies of development and solid sinterization of a metallic matrix composite MMC that has as starter materials 316L stainless steel atomized with water, and two different Tantalum Carbide TaC powders, with averages crystallite sizes of 13.78 nm and 40.66 nm. Aiming the metallic matrix s density and hardness increase was added different nanometric sizes of TaC by dispersion. The 316L stainless steel is an alloy largely used because it s high resistance to corrosion property. Although, its application is limited by the low wear resistance, consequence of its low hardness. Besides this, it shows low sinterability and it cannot be hardened by thermal treatments traditional methods because of the austenitic structure, face centered cubic, stabilized mainly in nickel presence. Steel samples added with TaC 3% wt (each sample with different type of carbide), following a mechanical milling route using conventional mill for 24 hours. Each one of the resulted samples, as well as the pure steel sample, were compacted at 700 MPa, room temperature, without any addictive, uniaxial tension, using a 5 mm diameter cylindrical mold, and quantity calculated to obtain compacted final average height of 5 mm. Subsequently, were sintered in vacuum atmosphere, temperature of 1290ºC, heating rate of 20ºC/min, using different soaking times of 30 and 60 min and cooled at room temperature. The sintered samples were submitted to density and micro-hardness analysis. The TaC reforced samples showed higher density values and an expressive hardness increase. The complementary analysis in optical microscope, scanning electronic microscope and X ray diffractometer, showed that the TaC, processed form, contributed with the hardness increase, by densification, itself hardness and grains growth control at the metallic matrix, segregating itself to the grain boarders

Sinterização de aço inoxidável reforçado com partículas nanométricas dispersas de carbeto de nióbio - NbC

Metal powder sintering appears to be promising option to achieve new physical and mechanical properties combining raw material with new processing improvements. It interest over many years and continue to gain wide industrial application. Stainless steel is a widely accepted material because high corrosion resistance. However stainless steels have poor sinterability and poor wear resistance due to their low hardness. Metal matrix composite (MMC) combining soft metallic matrix reinforced with carbides or oxides has attracted considerable attention for researchers to improve density and hardness in the bulk material. This thesis focuses on processing 316L stainless steel by addition of 3% wt niobium carbide to control grain growth and improve densification and hardness. The starting powder were water atomized stainless steel manufactured for Höganäs (D 50 = 95.0 μm) and NbC produced in the UFRN and supplied by Aesar Alpha Johnson Matthey Company with medium crystallite size 16.39 nm and 80.35 nm respectively. Samples with addition up to 3% of each NbC were mixed and mechanically milled by 3 routes. The route1 (R1) milled in planetary by 2 hours. The routes 2 (R2) and 3 (R3) milled in a conventional mill by 24 and 48 hours. Each milled samples and pure sample were cold compacted uniaxially in a cylindrical steel die (Ø 5 .0 mm) at 700 MPa, carried out in a vacuum furnace, heated at 1290°C, heating rate 20°C stand by 30 and 60 minutes. The samples containing NbC present higher densities and hardness than those without reinforcement. The results show that nanosized NbC particles precipitate on grain boundary. Thus, promote densification eliminating pores, control grain growth and increase the hardness values

Influência do uso de combustíveis alternativos na síntese por combustão via microondas para a produção de materiais cerâmicos com estrutura espinélio

The development and study of detectors sensitive to flammable combustible and toxic gases at low cost is a crucial technology challenge to enable marketable versions to the market in general. Solid state sensors are attractive for commercial purposes by the strength and lifetime, because it isn t consumed in the reaction with the gas. In parallel, the use of synthesis techniques more viable for the applicability on an industrial scale are more attractive to produce commercial products. In this context ceramics with spinel structure were obtained by microwave-assisted combustion for application to flammable fuel gas detectors. Additionally, alternatives organic-reducers were employed to study the influence of those in the synthesis process and the differences in performance and properties of the powders obtained. The organic- reducers were characterized by Thermogravimetry (TG) and Derivative Thermogravimetry (DTG). After synthesis, the samples were heat treated and characterized by Fourier Transform Infrared Spectroscopy (FTIR), X-ray Diffraction (XRD), analysis by specific area by BET Method and Scanning Electron Microscopy (SEM). Quantification of phases and structural parameters were carried through Rietveld method. The methodology was effective to obtain Ni-Mn mixed oxides. The fuels influenced in obtaining spinel phase and morphology of the samples, however samples calcined at 950 °C there is just the spinel phase in the material regardless of the organic-reducer. Therefore, differences in performance are expected in technological applications when sample equal in phase but with different morphologies are tested

Quantificação de Fases Cristalinas de Incrustações em Colunas de Produção de Petróleo pelo Método Rietveld

The scale is defined as chemical compounds from inorganic nature, initially soluble in salt solutions, which may precipitate accumulate in columns of production and surface equipment. This work aimd to quantify the crystalline phases of scale through the Rietveld method. The study was conducted in scale derived from columns production wells in development and recipients of pigs. After collecting samples of scale were performed the procedure for separations of inorganic and organic phase and preparation to be analyzed at the X-ray Laboratory. The XRD and XRF techniques were used to monitor whether identifying and quantifying crystalline phases present in the deposits. The SEM technique was used to visualize the morphology of the scales and assess their homogeneity after the milling process. XRD measurements were performed with and without milling and with or without the accessory spinner. For quantify crystalline phases the program DBWStools was used. The procedure for conducting the first refinement was instrumental in setting parameters, then the structural parameters of the phases in the sample and finally the parameters of the function profile used. In the diffraction patterns of samples of scale observed that the best measures were those that passed through the mill and used the accessory spinner. Through the results, it was noted that the quantitative analysis for samples of scale is feasible when need to monitor a particular crystalline phase in a well, pipeline or oil field. Routinely, the quantification of phases by the Rietveld method is hardwork because in many scale was very difficult to identify the crystalline phases present

Pirólise de borras oleosas de petroleo utilizando nanomateriais

The oily sludge is a complex mix of hydrocarbons, organic impurities, inorganic and water. One of the major problems currently found in petroleum industry is management (packaging, storage, transport and fate) of waste. The nanomaterials (catalysts) mesoporous and microporous are considered promising for refining and adsorbents process for environment protection. The aim of this work was to study the oily sludge from primary processing (raw and treated) and vacuum residue, with application of thermal analyses technique (pyrolysis), thermal and catalytic pyrolysis with nanomaterials, aiming at production petroleum derived. The sludge and vacuum residue were analyzed using a soxhlet extraction system, elemental analysis, thin layer chromatography, thermogravimetry and pyrolysis coupled in gas chromatography/mass spectrometry (Py GC MS). The catalysts AlMCM-41, AlSBA-15.1 e AlSBA-15.2 were synthesized with molar ratio silicon aluminum of 50 (Si/Al = 50), using tetraethylorthosilicante as source of silicon and pseudobuhemita (AlOOH) as source of aluminum. The analyzes of the catalysts indicate that materials showed hexagonal structure and surface area (783,6 m2/g for AlMCM-41, 600 m2/g for AlSBA-15.1, 377 m2/g for AlSBA-15.2). The extracted oily sludge showed a range 65 to 95% for organic components (oil), 5 to 35% for inorganic components (salts and oxides) and compositions different of derivatives. The AlSBA-15 catalysts showed better performance in analyzes for production petroleum derived, 20% increase in production of kerosene and light gas oil. The energy potential of sludge was high and it can be used as fuel in other cargo processed in refinery

Períodos de matocompetição na cultura da soja (Glycine max (L.) Merril), cultivares Santa Rosa e IAC-2. I- efeitos sobre os parâmetros de produção

Visando estudar a influência do período de competição das plantas daninhas sobre alguns parâmetros de produção da cultura da soja, foram instalados experimentos de campo com os cultivares Santa Rosa e IAC-2 em dois tipos de solos, Latossol Roxo e Latossol Vermelho Escuro - fase arenosa, no município de Jaboticabal, Estado de São Paulo, Brasil. O delineamento experimental utilizado foi o de blocos ao acaso , sendo os cultivares mantidos sem e com competição das plantas daninhas por períodos cujas extensões foram 0, 10, 20, 30, 40, 50 e 60 dias após a emergência. Com base nos resultados obtidos, pode-se concluir que: o período mínimo do início do ciclo que deve ser mantido livre de competição é de 30 a 40 dias após a emergência para o cultivar Santa Rosa e de 50 dias para o 'IAC-2'; para os dois cultivares, a produção de grãos foi efetivamente aumentada após o 20.° dia sem competição no solo Latossol Roxo e 30.° dia no solo Latossol Vermelho Escuro - fase arenosa, atingindo um valor máximo no 50.° dia para o 'Santa Rosa' e ao redor do 60.° dia para o 'IAC-2'; no ano agrícola de 1977/78 (solo Latosso l Roxo), a competição durante os primeiros 20 dias após a emergência causou perdas de produção em ambos os cultivares, entretanto, no de 1978/79 (solo Latossol Vermelho Escuro - fase arenosa) este período foi de 40 dias, mostrando a importância das interferências e da foclimáticas e das diferentes espécies daninhas, no processo de competição; e, dentre todos os parâmetros relacionados à produção de grãos, o número de vagens por planta foi o mais afetado pela competição das plantas daninhas.

Efeito de genótipos de caupi, Vigna unguiculata (L.) Walp., sobre o desenvolvimento de Callosobruchus maculatus (Fabricius) (Coleoptera: Bruchidae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Ácidos orgânicos em rações de poedeiras comerciais

Desenvolveu-se este trabalho com o objetivo de avaliar o efeito de ácidos orgânicos adicionados à dieta de aves de postura. Foram utilizadas 75 frangas Isa Brown de 4 meses de idade, divididas em três grupos experimentais (I, II e III) de 25 aves cada e avaliadas por um período de 8 semanas. O grupo I recebeu ração tratada com ácidos orgânicos por quatro semanas, enquanto que o grupo II recebeu ração com ácidos orgânicos por oito semanas, permanecendo o grupo III sem a suplementação de ácidos orgânicos durante todo o período experimental, sendo definido como grupo controle. Ao final do experimento, foram observados dados de produção de ovos, peso das aves, qualidade e peso de ovos. Os resultados demonstraram que a produção de ovos foi melhor nas aves tratadas com o aditivo acidificante (grupos I e II), sendo que os acidificantes também proporcionaram um melhor peso corporal nas aves (P<0,05). A qualidade e o peso dos ovos não foram afetados pela suplementação desses aditivos.

Adubação nitrogenada de cobertura no feijoeiro de invernoprimavera em três sistemas de cultivo

The aim of this study was to evaluate the nitrogen topdressing influence in common bean irrigated (winter-spring), in the first year of no tillage implementation. The experimental design was split-plot with three replications in randomized blocks. The plots were formed by three types of ground cover, corn-grain, corn-grain intercropped with Brachiaria ruziziensis and only B. ruziziensis. The subplots were formed by five doses of nitrogen topdressing (0, 40, 80, 120 and 160 kg ha(-1)), using urea as nitrogen source. It was determined the dry mass of residue present as ground cover, the full flowering time, the leaf nitrogen content, the 100 grains mass, the grain yield, the processing income, the chemical soil properties and economic analysis of common bean grain yield. It was found the common bean grain productivity in succession to corn-grain was positively influenced by nitrogen fertilization, showing it is economically viable only when given 160 kg ha(-1) of nitrogen and the intercropping corn-grain and B. ruziziensis use is the best option when the common bean is sown in succession.