A problemática do controlo interno na área das vendas

Contabilidade em Auditoria

Arbitrage en ligne et les litiges du commerce électronique

"Mémoire présenté à la Faculté des études supérieures en vue de l'obtention du grade de Maîtrise en droit (LLM)"

Quand l’action surpasse la perception : rôle de la vision et de la proprioception dans la perception et le contrôle en temps réel de l’orientation spatiale de la main

Cette recherche a pour but d’évaluer le rôle de la vision et de la proprioception pour la perception et le contrôle de l’orientation spatiale de la main chez l’humain. L’orientation spatiale de la main est une composante importante des mouvements d’atteinte et de saisie. Toutefois, peu d’attention a été portée à l’étude de l’orientation spatiale de la main dans la littérature. À notre connaissance, cette étude est la première à évaluer spécifiquement l’influence des informations sensorielles et de l’expérience visuelle pour la perception et le contrôle en temps réel de l'orientation spatiale de la main pendant le mouvement d’atteinte naturel vers une cible stationnaire. Le premier objectif était d’étudier la contribution de la vision et de la proprioception dans des tâches de perception et de mouvement d’orientation de la main. Dans la tâche de perception (orientation-matching task), les sujets devaient passivement ou activement aligner une poignée de forme rectangulaire avec une cible fixée dans différentes orientations. Les rotations de l’avant-bras et du poignet étaient soit imposées par l’expérimentateur, soit effectuées par les sujets. Dans la tâche de mouvement d’orientation et d’atteinte simultanées (letter posting task 1), les sujets ont réalisé des mouvements d’atteinte et de rotation simultanées de la main afin d’insérer la poignée rectangulaire dans une fente fixée dans les mêmes orientations. Les tâches ont été réalisées dans différentes conditions sensorielles où l’information visuelle de la cible et de la main était manipulée. Dans la tâche perceptive, une augmentation des erreurs d’orientation de la main a été observée avec le retrait des informations visuelles concernant la cible et/ou ou la main. Lorsque la vision de la main n’était pas permise, il a généralement été observé que les erreurs d’orientation de la main augmentaient avec le degré de rotation nécessaire pour aligner la main et la cible. Dans la tâche de mouvement d’orientation et d’atteinte simultanées, les erreurs ont également augmenté avec le retrait des informations visuelles. Toutefois, les patrons d’erreurs étaient différents de ceux observés dans la tâche de perception, et les erreurs d’orientation n’ont pas augmenté avec le degré de rotation nécessaire pour insérer la poignée dans la fente. En absence de vision de la main, il a été observé que les erreurs d’orientation étaient plus petites dans la tâche de mouvement que de perception, suggérant l’implication de la proprioception pour le contrôle de l’orientation spatiale de la main lors des mouvements d’orientation et d’atteinte simultanées. Le deuxième objectif de cette recherche était d’étudier l’influence de la vision et de la proprioception dans le contrôle en temps réel de l’orientation spatiale de la main. Dans une tâche d’orientation de la main suivie d’une atteinte manuelle (letter posting task 2), les sujets devaient d’abord aligner l’orientation de la même poignée avec la fente fixée dans les mêmes orientations, puis réaliser un mouvement d’atteinte sans modifier l’orientation initiale de la main. Une augmentation des erreurs initiales et finales a été observée avec le retrait des informations visuelles. Malgré la consigne de ne pas changer l’orientation initiale de la main, une diminution des erreurs d’orientation a généralement été observée suite au mouvement d’atteinte, dans toutes les conditions sensorielles testées. Cette tendance n’a pas été observée lorsqu’aucune cible explicite n’était présentée et que les sujets devaient conserver l’orientation de départ de la main pendant le mouvement d’atteinte (mouvement intransitif; letter-posting task 3). La diminution des erreurs pendant l’atteinte manuelle transitive vers une cible explicite (letter-posting task 2), malgré la consigne de ne pas changer l’orientation de la main pendant le mouvement, suggère un mécanisme de corrections automatiques pour le contrôle en temps réel de l’orientation spatiale de la main pendant le mouvement d’atteinte naturel vers une cible stationnaire. Le troisième objectif de cette recherche était d’évaluer la contribution de l’expérience visuelle pour la perception et le contrôle de l’orientation spatiale de la main. Des sujets aveugles ont été testés dans les mêmes tâches de perception et de mouvement. De manière générale, les sujets aveugles ont présenté les mêmes tendances que les sujets voyants testés dans la condition proprioceptive (sans vision), suggérant que l’expérience visuelle n’est pas nécessaire pour le développement d’un mécanisme de correction en temps réel de l’orientation spatiale de la main basé sur la proprioception.

Development of a method fon non-destructive testing of fruits using scanning laser vibrometry (SLV)

Quality control on fruits requires reliable methods, able to assess with reasonable accuracy and possibly in a non-destructive way their physical and chemical characteristics. More specifically, a decreased firmness indicates the presence of damage or defects in the fruit or else that the fruit has exceeded its “best before date”, becoming unsuitable for consumption. In high-value exotic fruits, such as mangoes, where firmness cannot be easily measured from a simple observation of texture, colour changes and unevenness of fruits surface, the use of non-destructive techniques is highly recommendable. In particular, the application of Laser vibrometry, based on the Doppler effect, a non-contact technique sensitive to differences in displacements inferior to the nanometre, appears ideal for a possible on-line control on food. Previous results indicated that a phase shift can be in a repeatable way associated with the presence of damage on the fruit, whilst a decreased firmness results in significant differences in the displacement of the fruits under the same excitation signal. In this work, frequency ranges for quality control via the application of a sound chirp are suggested, based on the measurement of the signal coherence. The variations of the average vibration spectrum of a grid of points, or of point-by-point signal velocity allows the go-no go recognition of “firm” and “over-ripe” fruits, with notable success in the particular case of mangoes. The future exploitation of this work will include the application of this method to allow on-line control during conveyor belt distribution of fruits.

Shaking hands: Priming by social action effects

In a semi-naturalistic response-effect compatibility paradigm, participants were given the opportunity to learn that hand-shaking actions would be followed by social effects (human hand-shaking stimuli from a third-person perspective) or inanimate effects (block arrow stimuli). Relative to the actions, these effects appeared on the same or the opposite side of the screen (positional compatibility), and pointed towards or away from the response hand (directional compatibility). After learning, response times indicated a positional compatibility effect for both social and inanimate effects, but a directional compatibility effect occurred only for social action effects. These findings indicate that actions can be represented, not only by their effects on the inanimate world, but also by their effects on the actions of others. They are consistent with ideomotor theory, and with the view that actions are represented by bidirectional response-effect associations. They also have implications with respect to the origins and on-line control of imitation and the systems supporting imitation.

HCI issues in power systems

With the advance of information technology capabilities, and the importance of human computer interfaces within society there has been a significant increase in research activity within the field of human computer interaction (HCI). This paper summarizes some of the work undertaken to date, paying particular attention to methods applicable to on-line control and monitoring systems such as those employed by The National Grid Company plc.

Pervasive Business Intelligence

In the last few years, a new generation of Business Intelligence (BI) tools called BI 2.0 has emerged to meet the new and ambitious requirements of business users. BI 2.0 not only introduces brand new topics, but in some cases it re-examines past challenges according to new perspectives depending on the market changes and needs. In this context, the term pervasive BI has gained increasing interest as an innovative and forward-looking perspective. This thesis investigates three different aspects of pervasive BI: personalization, timeliness, and integration. Personalization refers to the capacity of BI tools to customize the query result according to the user who takes advantage of it, facilitating the fruition of BI information by different type of users (e.g., front-line employees, suppliers, customers, or business partners). In this direction, the thesis proposes a model for On-Line Analytical Process (OLAP) query personalization to reduce the query result to the most relevant information for the specific user. Timeliness refers to the timely provision of business information for decision-making. In this direction, this thesis defines a new Data Warehuose (DW) methodology, Four-Wheel-Drive (4WD), that combines traditional development approaches with agile methods; the aim is to accelerate the project development and reduce the software costs, so as to decrease the number of DW project failures and favour the BI tool penetration even in small and medium companies. Integration refers to the ability of BI tools to allow users to access information anywhere it can be found, by using the device they prefer. To this end, this thesis proposes Business Intelligence Network (BIN), a peer-to-peer data warehousing architecture, where a user can formulate an OLAP query on its own system and retrieve relevant information from both its local system and the DWs of the net, preserving its autonomy and independency.

Magnetic susceptibility measurement applied to the minerals industry

The efficiency of numerous mineral processing operations can be determined by measuring the magnetic properties of the process streams. This measurement, if done at all, is currently performed by laboratory testing of spot samples. This is an inherently slow process and, where feed grades are variable, optimum performance is generally not achieved. This paper describes the rapid measurement of the magnetic properties of minerals. AC measurement techniques, including the analysis of the phase component of the magnetic vector; frequency dependent magnetic susceptibility and the effect of applied magnetic field strength will be discussed. Industrial applications in mineral sands, copper smelting, ferrosilicon testing and drill core scanning will be reported. (C) 2006 Elsevier Ltd. All rights reserved.

Novel developments in process optimisation using predictive control

In industrial practice, constrained steady state optimisation and predictive control are separate, albeit closely related functions within the control hierarchy. This paper presents a method which integrates predictive control with on-line optimisation with economic objectives. A receding horizon optimal control problem is formulated using linear state space models. This optimal control problem is very similar to the one presented in many predictive control formulations, but the main difference is that it includes in its formulation a general steady state objective depending on the magnitudes of manipulated and measured output variables. This steady state objective may include the standard quadratic regulatory objective, together with economic objectives which are often linear. Assuming that the system settles to a steady state operating point under receding horizon control, conditions are given for the satisfaction of the necessary optimality conditions of the steady-state optimisation problem. The method is based on adaptive linear state space models, which are obtained by using on-line identification techniques. The use of model adaptation is justified from a theoretical standpoint and its beneficial effects are shown in simulations. The method is tested with simulations of an industrial distillation column and a system of chemical reactors.

Hierarchical control and optimisation of the Tennessee Eastman process

Based on integrated system optimisation and parameter estimation a method is described for on-line steady state optimisation which compensates for model-plant mismatch and solves a non-linear optimisation problem by iterating on a linear - quadratic representation. The method requires real process derivatives which are estimated using a dynamic identification technique. The utility of the method is demonstrated using a simulation of the Tennessee Eastman benchmark chemical process.

Soil attributes and efficiency of sulfentrazone on control of purple nutsedge (Cyperus rotundus L.)

Herbicidas aplicados ao solo são submetidos à adsorção, lixiviação e degradação por processos físicos, químicos e biológicos, além da absorção pelas plantas. Todos esses processos são afetados pela classe dos solos onde foram aplicados e das condições climáticas reinantes logo após a aplicação, que afetarão a eficiência dos produtos no controle de plantas daninhas. Investigaram-se as influências dos atributos de solos e condições de cultivo na eficiência do herbicida sulfentrazone no controle da planta daninha tiririca (Cyperus rotundus L.). O Latossolo Vermelho-Amarelo Distrófico (LVAd), o Latossolo Vermelho (LVd - Distrófico; LVdf - Distroférrico; LVef - Eutroférrico) e o Nitossolo Vermelho Eutrófico (NVe) foram coletados sob duas condições de cultivo, visando obter solos com teores diferenciados de argila, óxido de ferro e matéria orgânica. As amostras dos solos foram submetidas à caracterização granulométrica, química e mineralógica e, em seguida, utilizadas no bioensaio de avaliação da eficiência do sulfentrazone (1,6 L p.c. ha-1) no controle da tiririca em condições de pré-emergência. O sulfentrazone apresentou comportamento diferenciado entre as classes de solos estudados e a sua eficiência diminuiu com o aumento do teor de óxido de ferro nos solos, na seguinte ordem: LVAd, LVd, NVe, LVef e LVdf, sendo que as variações nos teores de argila (240 a 640 g kg-1) e da matéria orgânica (12 a 78 g kg-1) dos solos não interferiram na eficiência do sulfentrazone.

Computer control of chemical process plants with special reference to distillation

A sieve plate distillation column has been constructed and interfaced to a minicomputer with the necessary instrumentation for dynamic, estimation and control studies with special bearing on low-cost and noise-free instrumentation. A dynamic simulation of the column with a binary liquid system has been compiled using deterministic models that include fluid dynamics via Brambilla's equation for tray liquid holdup calculations. The simulation predictions have been tested experimentally under steady-state and transient conditions. The simulator's predictions of the tray temperatures have shown reasonably close agreement with the measured values under steady-state conditions and in the face of a step change in the feed rate. A method of extending linear filtering theory to highly nonlinear systems with very nonlinear measurement functional relationships has been proposed and tested by simulation on binary distillation. The simulation results have proved that the proposed methodology can overcome the typical instability problems associated with the Kalman filters. Three extended Kalman filters have been formulated and tested by simulation. The filters have been used to refine a much simplified model sequentially and to estimate parameters such as the unmeasured feed composition using information from the column simulation. It is first assumed that corrupted tray composition measurements are made available to the filter and then corrupted tray temperature measurements are accessed instead. The simulation results have demonstrated the powerful capability of the Kalman filters to overcome the typical hardware problems associated with the operation of on-line analyzers in relation to distillation dynamics and control by, in effect, replacirig them. A method of implementing estimator-aided feedforward (EAFF) control schemes has been proposed and tested by simulation on binary distillation. The results have shown that the EAFF scheme provides much better control and energy conservation than the conventional feedback temperature control in the face of a sustained step change in the feed rate or multiple changes in the feed rate, composition and temperature. Further extensions of this work are recommended as regards simulation, estimation and EAFF control.

Deep hole drilling with twist drills: aspects of the CNC process and its real time monitoring and adaptive control

Deep hole drilling is one of the most complicated metal cutting processes and one of the most difficult to perform on CNC machine-tools or machining centres under conditions of limited manpower or unmanned operation. This research work investigates aspects of the deep hole drilling process with small diameter twist drills and presents a prototype system for real time process monitoring and adaptive control; two main research objectives are fulfilled in particular : First objective is the experimental investigation of the mechanics of the deep hole drilling process, using twist drills without internal coolant supply, in the range of diarneters Ø 2.4 to Ø4.5 mm and working length up to 40 diameters. The definition of the problems associated with the low strength of these tools and the study of mechanisms of catastrophic failure which manifest themselves well before and along with the classic mechanism of tool wear. The relationships between drilling thrust and torque with the depth of penetration and the various machining conditions are also investigated and the experimental evidence suggests that the process is inherently unstable at depths beyond a few diameters. Second objective is the design and implementation of a system for intelligent CNC deep hole drilling, the main task of which is to ensure integrity of the process and the safety of the tool and the workpiece. This task is achieved by means of interfacing the CNC system of the machine tool to an external computer which performs the following functions: On-line monitoring of the drilling thrust and torque, adaptive control of feed rate, spindle speed and tool penetration (Z-axis), indirect monitoring of tool wear by pattern recognition of variations of the drilling thrust with cumulative cutting time and drilled depth, operation as a data base for tools and workpieces and finally issuing of alarms and diagnostic messages.

Supervisory control of wastewater treatment plants by combining principal component analysis and fuzzy c-means clustering

In this paper a methodology for integrated multivariate monitoring and control of biological wastewater treatment plants during extreme events is presented. To monitor the process, on-line dynamic principal component analysis (PCA) is performed on the process data to extract the principal components that represent the underlying mechanisms of the process. Fuzzy c-means (FCM) clustering is used to classify the operational state. Performing clustering on scores from PCA solves computational problems as well as increases robustness due to noise attenuation. The class-membership information from FCM is used to derive adequate control set points for the local control loops. The methodology is illustrated by a simulation study of a biological wastewater treatment plant, on which disturbances of various types are imposed. The results show that the methodology can be used to determine and co-ordinate control actions in order to shift the control objective and improve the effluent quality.

Effects of slurry rheology on industrial grinding performance

To determine the effect of slurry rheology on industrial grinding performance, 45 surveys were conducted on 16 full-scale grinding mills in five sites. Four operating variables - mill throughput, slurry density, slurry viscosity and feed fines content-were investigated. The rheology of the mill discharge slurries was measured either on-line or off-line, and the data were processed using a standard procedure to obtain a full range of flow curves. Multi-linear regression was employed as a statistical analysis tool to determine whether or not rheological effects exert an influence on industrial grinding, and to assess the influence of the four mill operating conditions on mill performance in terms of the Grinding Index, a criterion describing the overall breakage of particles across the mill. The results show that slurry rheology does influence industrial grinding. The trends of these effects on Grinding Index depend upon the rheological nature of the slurry-whether the slurries are dilatant or pseudoplastic, and whether they exhibit a high or low yield stress. The interpretation of the regression results is discussed, the observed effects are summarised, and the potential for incorporating rheological principles into process control is considered, Guidelines are established to improve industrial grinding operations based on knowledge of the rheological effects. This study confirms some trends in the effect of slurry rheology on grinding reported in the literature, and extends these to a broader understanding of the relationship between slurry properties and rheology, and their effects on industrial milling performance. (C) 2002 Elsevier Science B.V. All rights reserved.