Planning and Management of Mobility in Natural Protected Areas

The paper describes some relevant results of an on-going research aiming to elaborate a methodology to help the mobility management in natural parks, compatible with their protection missions: it has been developed a procedure to reproduce the mobility-environment relationships in various operational conditions. The final purpose is the identification of: a) the effects of various choices in transport planning, both at long term and strategic level; b) the most effective policies of mobility management. The work is articulated in the following steps: 1) definition of protected area on the basis of ecological and socio-economic criteria and legislative constraints; 2) analysis of mobility needs in the protected areas; 3) reconstruction of the state of the art of mobility management in natural parks at European level; 4) analysis of used traffic flows measurement methods; 5) analysis of environmental impacts due to transport systems modelling (air pollution and noise only); 6) identification of mitigation measures to be potentially applied. The whole methodology has been tested and validated on Italian case studies: i) the concerned area has been zoned according to the land-use peculiarities; ii) the local situations of transport infrastructure (roads and parking), services (public transport systems) and rules (traffic regulations) have been mapped with references to physical and functional attributes; iii) the mobility, both systematic and touristic, has been represented in an origin-destination matrix. By means of an assignment model the flows have been distributed and the corresponding average speeds to quantify gaseous and noise emissions was calculated, the criticalities in the reference scenario have been highlighted, as well as some alternative scenarios, including both operational and infrastructural measures have been identified. The comparison between projects and reference scenario allowed the quantification of effects (variation of emissions) for each scenario and a selection of the most effective management actions to be taken.

ITIL in Small to Medium-Sized Enterprises: toward a proposal based on an ITIL processes implementation sequence and a pofile scheme strategy for implementing the first process in the sequence

The backdrop of actual problematic about the implementation of Information Technology (IT) services management in Small and Medium Enterprises (SMEs) will be described. It will be exposed the reasons why reaching a maturity/capability level through well-known standards or the implementation of good software engineering practices by means of IT infrastructure Library are really difficult to achieve by SMEs. Also, the solutions to the exposed problems will be explained. Also master thesis goals are presented in terms of: purpose, research questions, research goals, objectives and scope. Finally, thesis structure is described.

An interactive web-based learning assistant for structural analysis of continuous beams

There are significant levels of concern about the relevance and the difficulty of learning some issues on Strength of Materials and Structural Analysis. Most students of Continuum Mechanics and Structural Analysis in Civil Engineering usually point out some key learning aspects as especially difficult for acquiring specific skills. These key concepts entail comprehension difficulties but ease access and applicability to structural analysis in more advanced subjects. Likewise, some elusive but basic structural concepts, such as flexibility, stiffness or influence lines, are paramount for developing further skills required for advanced structural design: tall buildings, arch-type structures as well as bridges. As new curricular itineraries are currently being implemented, it appears appropriate to devise a repository of interactive web-based applications for training in those basic concepts. That will hopefully train the student to understand the complexity of such concepts, to develop intuitive knowledge on actual structural response and to improve their preparation for exams. In this work, a web-based learning assistant system for influence lines on continuous beams is presented. It consists of a collection of interactive user-friendly applications accessible via Web. It is performed in both Spanish and English languages. Rather than a “black box” system, the procedure involves open interaction with the student, who can simulate and virtually envisage the structural response. Thus, the student is enabled to set the geometric, topologic and mechanic layout of a continuous beam and to change or shift the loading and the support conditions. Simultaneously, the changes in the beam response prompt on the screen, so that the effects of the several issues involved in structural analysis become apparent. The system is performed through a set of web pages which encompasses interactive exercises and problems, written in JavaScript under JQuery and DyGraphs frameworks, given that their efficiency and graphic capabilities are renowned. Students can freely boost their self-study on this subject in order to face their exams more confidently. Besides, this collection is expected to be added to the "Virtual Lab of Continuum Mechanics" of the UPM, launched in 2013 (http://serviciosgate.upm.es/laboratoriosvirtuales/laboratorios/medios-continuos-en-construcci%C3%B3n)

Análisis de registros de aceleraciones verticales en caja de grasa y correlación con la infraestructura

El sector ferroviario ha experimentado en los últimos años un empuje espectacular acaparando las mayores inversiones en construcción de nuevas líneas de alta velocidad. Junto a esta inversión inicial no se debe perder de vista el coste de mantenimiento y gestión de las mismas y para ello es necesario avanzar en el conocimiento de los fenómenos de interacción de la vía y el material móvil. En los nuevos trazados ferroviarios, que hacen del ferrocarril un modo de transporte competitivo, se produce un notable aumento en la velocidad directamente relacionado con la disminución de los tiempos de viaje, provocando por ello elevados esfuerzos dinámicos, lo que exige una elevada calidad de vía para evitar el rápido deterioro de la infraestructura. Resulta primordial controlar y minimizar los costes de mantenimiento que vienen generados por las operaciones de conservación de los parámetros de calidad y seguridad de la vía férrea. Para reducir las cargas dinámicas que actúan sobre la vía deteriorando el estado de la misma, debido a este aumento progresivo de las velocidades, es necesario reducir la rigidez vertical de la vía, pero igualmente este aumento de velocidades hace necesarias elevadas resistecias del emparrillado de vía y mejoras en las plataformas, por lo que es necesario buscar este punto de equilibrio en la elasticidad de la vía y sus componentes. Se analizan las aceleraciones verticales medidas en caja de grasa, identificando la rigidez vertical de la vía a partir de las frecuencias de vibración vertical de las masas no suspendidas, correlacionándola con la infraestructura. Estas aceleraciones verticales se desprenden de dos campañas de medidas llevadas a cabo en la zona de estudio. En estas campañas se colocaron varios acelerómetros en caja de grasa obteniendo un registro de aceleraciones verticales a partir de las cuales se ha obteniendo la variación de la rigidez de vía de unas zonas a otras. Se analiza la rigidez de la vía correlacionándola con las distintas tipologías de vía y viendo la variación del valor de la rigidez a lo largo del trazado ferroviario. Estos cambios se manifiestan cuando se producen cambios en la infraestructura, de obras de tierra a obras de fábrica, ya sean viaductos o túneles. El objeto principal de este trabajo es profundizar en estos cambios de rigidez vertical que se producen, analizando su origen y las causas que los provocan, modelizando el comportamiento de los mismos, para desarrollar metodologías de análisis en cuanto al diseño de la infraestructura. Igualmente se analizan los elementos integrantes de la misma, ahondando en las características intrínsecas de la rigidez vertical global y la rigidez de cada uno de los elementos constituyentes de la sección tipo ferroviaria, en cada una de las secciones características del tramo en estudio. Se determina en este trabajo si se produce y en qué medida, variación longitudinal de la rigidez de vía en el tramo estudiado, en cada una de las secciones características de obra de tierra y obra de fábrica seleccionadas analizando las tendencias de estos cambios y su homogeneidad a lo largo del trazado. Se establece así una nueva metodología para la determinación de la rigidez vertical de la vía a partir de las mediciones de aceleraciones verticales en caja de grasa así como el desarrollo de una aplicación en el entorno de Labview para el análisis de los registros obtenidos. During the last years the railway sector has experienced a spectacular growth, focusing investments in the construction of new high-speed lines. Apart from the first investment the cost of maintaining and managing them has to be considered and this requires more knowledge of the process of interaction between track and rolling stock vehicles. In the new high-speed lines, that make of the railway a competitive mode of transport, there is a significant increase in speed directly related to the shorten in travel time, and that produces high dynamic forces. So, this requires a high quality of the track to avoid quickly deterioration of infrastructure. It is essential to control and minimize maintenance costs generated by maintenance operations to keep the quality and safety parameters of the railway track. Due to this gradual increase of speed, and to reduce the dynamic loads acting on the railway track causing its deterioration, it is necessary to reduce the vertical stiffness of the track, but on the other hand this speed increase requires high resistance of the railway track and improvements of the railway platform, so we must find the balance between the elasticity of the track and its components. Vertical accelerations in axle box are measured and analyzed, identifying the vertical stiffness of the railway track obtained from the vertical vibration frequency of the unsprung masses, correlating with the infrastructure. These vertical accelerations are the result of two measurement campaigns carried out in the study area with the placement of several accelerometers located in the axle box. From these vertical accelerations the variation of the vertical stiffness from one area to another is obtained. The track stiffness is analysed relating with the different types of infrastructure and the change in the value of the stiffness along the railway line. These changes are revealed when changes in infrastructure occurs, for instance; earthworks to bridges or tunnels. The main purpose of this paper is to examine these vertical stiffness changes, analysing its origins and causes, modelling their behaviour, developing analytical methodologies for the design of infrastructure. In this thesis it is also reviewed the different elements of the superstructure, paying special attention to the vertical stiffness of each one. In this study is determined, if it happens and to what extent, the longitudinal variation in the stiffness of track along the railway line studied in every selected section; earthwork, bridges and tunnels. They are also analyzed trends of these changes and homogeneity along the path. This establishes a new method for determining the vertical stiffness of the railway track from the vertical accelerations measured on axle box as well as an application developed in LabView to analyze the recordings obtained.

Flooding through the lens of mobile phone activity

Natural disasters affect hundreds of millions of people worldwide every year. Emergency response efforts depend upon the availability of timely information, such as information concerning the movements of affected populations. The analysis of aggregated and anonymized Call Detail Records (CDR) captured from the mobile phone infrastructure provides new possibilities to characterize human behavior during critical events. In this work, we investigate the viability of using CDR data combined with other sources of information to characterize the floods that occurred in Tabasco, Mexico in 2009. An impact map has been reconstructed using Landsat-7 images to identify the floods. Within this frame, the underlying communication activity signals in the CDR data have been analyzed and compared against rainfall levels extracted from data of the NASA-TRMM project. The variations in the number of active phones connected to each cell tower reveal abnormal activity patterns in the most affected locations during and after the floods that could be used as signatures of the floods - both in terms of infrastructure impact assessment and population information awareness. The epresentativeness of the analysis has been assessed using census data and civil protection records. While a more extensive validation is required, these early results suggest high potential in using cell tower activity information to improve early warning and emergency management mechanisms.

Planning and management of mobility in natural protected areas

The final purpose is the identification of: a) the effects of various choices in transport planning, both at long term and strategic level; b) the most effective policies of mobility management. The preliminary work was articulated in the following steps: 1) definition of protected area on the basis of ecological and socio-economic criteria and legislative constraints; 2) analysis of mobility needs in the protected areas; 3) reconstruction of the state of the art of mobility management in natural parks at European level; 4) analysis of used traffic flows measurement methods; 5) analysis of environmental impacts due to transport systems modelling (limited to air pollution and noise); 6) identification of mitigation measures to the potentially applied. The whole methodology has been firstly tested on the case study of the National Park of ?Gran Sasso and Monti della Laga? and further validated on the National Park of ?Gargano?, both located Italy: i) the concerned area has been zoned according to the land-use peculiarities; ii) the local situations of transport infrastructure (roads and parking), services (public transport systems) and rules (traffic regulations) have been mapped with references to physical and functional attributes; iii) the mobility, both systematic and touristic, has been synthetically represented in an origin-destination matrix. By means of an assignment model it has been determined the distribution of flows and the corresponding average speeds to quantify gaseous and noise emissions. On this basis the environmental criticalities in the reference scenario have been highlighted, as well as some alternative scenarios including both operational and infrastructural measures have been identified. The comparison between the projects and the reference scenario allowed the quantification of the effects (variation of emissions) for each scenario and a selection of the most effective management actions to be taken.

Research challenges for cross-cloud application

Federated clouds can expose the Internet as a homogeneous compute fabric. There is an opportunity for developing cross-cloud applications that can be deployed pervasively over the Internet, dynamically adapting their internal topology to their needs. In this paper we explore the main challenges for fully realizing the potential of cross-cloud applications. First, we focus on the networking dimension of these applications. We evaluate what support is needed from the infrastructure, and what are the further implications of opening the networking side. On a second part, we examine the impact of a distributed deployment for applications, assessing the implications from a management perspective, and how it affects the delivery of quality of service and non-functional requirements.

Flooding through the lens of mobile phone activity

Natural disasters affect hundreds of millions of people worldwide every year. Emergency response efforts depend upon the availability of timely information, such as information concerning the movements of affected populations. The analysis of aggregated and anonymized Call Detail Records (CDR) captured from the mobile phone infrastructure provides new possibilities to characterize human behavior during critical events. In this work, we investigate the viability of using CDR data combined with other sources of information to characterize the floods that occurred in Tabasco, Mexico in 2009. An impact map has been reconstructed using Landsat-7 images to identify the floods. Within this frame, the underlying communication activity signals in the CDR data have been analyzed and compared against rainfall levels extracted from data of the NASA-TRMM project. The variations in the number of active phones connected to each cell tower reveal abnormal activity patterns in the most affected locations during and after the floods that could be used as signatures of the floods - both in terms of infrastructure impact assessment and population information awareness. The representativeness of the analysis has been assessed using census data and civil protection records. While a more extensive validation is required, these early results suggest high potential in using cell tower activity information to improve early warning and emergency management mechanisms.

Vacíos urbanos en la ciudad de Zaragoza (1975-2010). Oportunidades para la estructuración y continuidad urbana

La expansión de las ciudades hacia la periferia en las últimas décadas ha generado una serie de tejidos en colisión, donde los intersticios y los espacios residuales muestran la realidad de una ciudad dispersa. A esta serie de espacios intermedios los denominaremos “vacíos urbanos” y determinaremos una serie de factores que hagan posible su identificación Los vacíos urbanos son el objeto de la Tesis. El concepto “vacío urbano” adquiere un determinado significado para la investigación y se acota formulando una serie de parámetros para su definición. Definiremos los “vacíos urbanos” como espacios que han aparecido en el extrarradio de las ciudades, fruto de una expansión sin precedentes de las áreas urbanas. Han surgido como lugares residuales condicionados por elementos naturales o por infraestructuras, ligados a una temporalidad incierta, no inmersos en la dinámicas urbanas o habiendo perdido su funcionalidad. El objetivo de esta investigación es localizar y clasificar los vacíos existentes en la ciudad partiendo de la hipótesis de que es posible establecer una metodología para su reconocimiento y comprobación de los parámetros que los definen. La investigación centra su estudio en la ciudad de Zaragoza, como un ejemplo paradigmático, confirmando que la nueva fenomenología territorial, no sólo se manifiesta en dicha ciudad y en las áreas en concreto donde se ha estudiado, sino que más bien se trata de observarla como una serie de modelos tipológicos que respondan a un proceso de análisis. La propuesta metodológica de loa tesis pasa por reconocerlos, mostrarlos y darles una visibilidad que permita su clasificación, el desarrollo de un estudio de Áreas de la ciudad donde se localizan y un análisis de cada tipología de vacío urbano. Como instrumento metodológico se ha elaborado una detallada cartografía a diferentes escalas. La realización de los planos ha sido el medio de análisis que ha permitido localizar e interpretar los vacíos, complementado con unas escogidas fotografías de estos entornos. La metodología se convierte en un modo de descubrir y analizar los vacíos, el proceso conlleva la comprobación y la clasificación en una tipología. Según se han ido analizando nuevas áreas, se confirma como un hecho repetitivo exitoso y se observa que es aplicable a otras áreas urbanas de similares características, donde se den las condiciones principales de cada tipo. En general, deberán ser espacios localizados en la periferia de núcleos urbanos donde aparezcan fenómenos ligados a una expansión discontinua. Parece probable que el futuro de la ciudad se tenga que resolver en las próximas décadas sobre su actual extensión; bajo este supuesto, es trascendente la función que los vacíos puedan desempeñar en el futuro desarrollo urbano. Toda posibilidad de intervención precisará de una necesaria reinterpretación, puestas las miras en su potencial como elementos capaces de generar una rehabilitación urbana. A su vez se hace conveniente plantear una reflexión sobre estos espacios cargados de una dimensión social y cultural, como lugares capaces de articular y dotar de identidad al medio urbano. Los vacíos deberían protagonizar un papel relevante en la estructuración urbana, abriendo posibilidades para el tramado de la ciudad desde nuevas perspectivas. Una apuesta para que estos espacios libres pasen de ser el objetivo de procesos urbanizadores tradicionales, a ser considerados como oportunos elementos vertebradores de los entornos periurbanos, colaborando en el objetivo de una ciudad contemporánea sostenible. ABSTRACT In the last decades the city periphary expansion has provoked a series of matters to collide, where interstices and waste lands show the reality of a divided city. We shall determine a number of factors allowing us to treat these “in between” spaces, also called "urban voids" as identifiable elements. We will consider them the subject of the thesis and establish them as a "concept", delimiting the meaning of the research specifically acquired, defining, and formulating a set of parameters. "Urban voids" are defined as spaces that have appeared on the outskirts of cities, the result of an unprecedented expansion of urban areas. They have emerged as waste lands, conditioned by natural elements or infrastructure, related to uncertain temporality, not immersed in the urban dynamics, or having lost their functionality. It seems likely that in the upcoming decades, the future of the city will have to resolve its current way of expanding . It is under this assumption that urban voids, as intermediate spaces, will play an important role in future urban developments. Any possible intervention will require a necessary reinterpretation, closely watching their potential as elements capable of generating an urban rehabilitation. At the same time, we wish to reflect on these spaces, in many cases loaded with a social and cultural dimension, as places able to articulate and give identity to the urban environment. Based on the hypothesis that it is possible to establish a methodology for recognition and verification, the purpose of this research is to locate and classify the existing urban voids in the city. The research focuses its study on the city of Saragossa which can be seen as a paradigmatic example. The objective is to confirm that this new territorial phenomenology, not only manifests itself in Saragossa and specific areas under study, but also, can be observed as a series of typological models that respond to a review process. The methodological proposal will recognize, demonstrate, and exhibit these urban voids, in a light that will allow us to classify them, examine the different areas where they can be found, and develop a tipology analysis of each type of urban void found. The technical tool used in this research is a detailed mapping at different scales. A realization of plans, as a mean of analysis, supplemented with a few selected pictures of these environments, will facilitate the location and interpretation of these voids. This scholarly approach to discover and analyze urban voids will involve checking and classifying them in a typology. It has been confirmed as a successful constant regulator while exploring new areas. It will be apply to other urban areas with similar characteristics, that is, spaces located on the periphery of urban areas where expansion is linked to the appearence of discontinuous phenomena. The urban voids play a fundamental role within the urban structure, providing the city a weaving scheme with opportunities of fresh perspectives. The challenge for these free spaces is to move from being the consequence of traditional urban development processes, to being considered opportune backbone elements of peri-urban environments, and to finally contribute to the objectives of a sustainable contemporary city.

El convenio europeo del paisaje. Una propuesta metodológica para su implementación en el ámbito urbano

En la actualidad, existe la necesidad de vincular la práctica urbana y arquitectónica al pensamiento ecológico. Eso sucede porque el paisaje es el ámbito disciplinario que registra una mayor identidad contemporánea del lugar y el medio a través del cual asociar las estructuras urbanas a los procesos ecológicos. La amplitud conceptual del término paisaje, le otorga la capacidad para teorizar y proyectar sitios, territorios, ecosistemas, redes organizacionales complejas, infraestructuras, amplias superficies urbanas, y ser visto a la vez como una herramienta de negociación entre conflictos territoriales, diferentes escalas, cruces de fronteras administrativas y enfoques sectoriales. En esta tesis se presenta una propuesta metodológica para la implementación del Convenio Europeo del Paisaje (Consejo de Europa, 2000) en contextos urbanos y periurbanos. Para ello, la tesis aborda, desde una perspectiva aplicada a la planificación territorial, las relaciones espaciales de los diferentes elementos del sistema territorial que componen el mosaico paisajístico de una ciudad de rango medio, Segovia, y su entorno inmediato. El enfoque aplicado de la tesis se materializa a partir de una serie de propuestas de diseño, planificación, ordenación, gestión y protección del paisaje enfocadas a resolver problemas concretos detectados en la zona de estudio seleccionada. Para definir dichas propuestas,, la tesis adopta las bases teóricas o conceptuales de la Arquitectura del Paisaje, una disciplina de diseño aplicada, basada en significados sociales, ecológicos, económicos, culturales e históricos y en los valores visuales y estéticos. El resultado es la propuesta de una herramienta, el Plan de Paisaje de Segovia, cuyo objetivo es el de ofrecer una estrategia para el desarrollo a escala local basado en los procesos ecológicos y las estructuras del paisaje. La identificación y caracterización del paisaje, la definición de objetivos de calidad paisajística de protección, conservación, restauración y creación de nuevos paisajes, así como la propuesta de una estrategia de infraestructura verde para el municipio que promueva la conexión ecológica a escala regional, pretenden enriquecer y mejorar el proceso de planificación urbana y logran una ordenación territorial más integrada, más armónica y equilibrada. Los beneficios de incorporar un enfoque basado en el carácter del paisaje para asesorar en la toma de decisiones sobre el crecimiento urbano y los futuros desarrollos están cada vez mas demostrados y reconocidos. En el contexto europeo, los Planes de Paisaje están siendo incorporados como una nueva herramienta para hacer más efectivo el cumplimiento de los objetivos de desarrollo sostenible. ABSTRACT Nowadays, there is a need to link urban and architectural practice to ecological thinking, being landscape the disciplinary field which has the highest contemporary identity of the place, as well as the capacity to associate urban structures with ecological processes. The conceptual scope of the term landscape offers the ability to theorize and project sites, territories, ecosystems, complex organizational networks, infrastructures, large urban areas, and be seen as a tool to negotiate between territorial conflicts, different scales, administrative boundaries and sectoral approaches. A methodology for the implementation of the European Landscape Convention (Council of Europe, 2000) in urban and peri-urban contexts is presented in this thesis. To do this, the thesis examines, from an applied perspective to spatial planning, the spatial relationships of the different elements of the territorial system that make up the landscape mosaic of Segovia, a middle size city, and its immediate surroundings. The applied approach results in a series of proposals for design, planning, development, management and protection of the landscape focused on solving specific problems identified in the study area selected. To define these proposals, the thesis adopts the theoretical and conceptual foundations of Landscape Architecture, an applied design discipline, based on social, ecological, economic, cultural and historical meanings and visual and aesthetic values. The result is the proposal of a tool, the Landscape Plan of Segovia, whose aim is to provide a strategy for development at the local level, based on ecological processes and landscape structures. The identification and characterization of the landscape, the definition of landscape quality objectives for protection, conservation, restoration and creation of new landscapes as well as a proposed green infrastructure strategy for the town to promote ecological connectivity regionally, intend to enrich and improve the urban planning process and ensure a more integrated, harmonious and balanced territorial development. The benefits of incorporating an approach based on the character of the landscape to assist in the decision making processes on urban growth and future developments are increasingly recognized and proven. In the European context, Landscape Plans are being incorporated as a new tool for a more effective compliance with the objectives of sustainable development.

Implications of data-intensive applications for next generation mobile networks

Lately, the mobile data market has moved into a growth stage triggered by two facts: affordability of mobile broadband, and availability of data-friendly devices. At this stage, market growth is no longer dependent on push strategies from suppliers; on the contrary, demand is now driving the market. However, it will not be easy for mobile operating companies to cope up with the demand to come in the near future. The infrastructure that is needed to support corresponding demand is far from completion. Operators are forced to make heavy investments to upgrade and expand their networks. To decide how to handle the present and upcoming demand, they need to identify and understand the characteristics of the scenarios they face. This is precisely the aim of this article, which provides figures on the consequences for mobile infrastructures of a generalised mobile media uptake. Data from the Spanish mobile deployment case have been used to arrive at practical figures and illustration of results, but the conclusions are easily extended to other countries and regions

Option contracts for allocating water in inter-basin transfers: the case of the Tagus-Segura Basin in Spain

Users in the Mediterranean region face significant water supply risks. Water markets mechanisms can provide flexibility to water systems run in tight situations. The largest water infrastructure in the Iberian Peninsula connects the Segura and Tagus Basins. Stakeholders and politicians in the Tagus Basin have asked that water transfers between the two basins be eventually phased out. The need to increase the statutory minimum environmental flow in the middle Tagus and to meet new urban demands is going to result in a redefinition of the Transfer?s management rules, leading to a reduction in the transferable volumes. To minimise the consequences of such restrictions to irrigators in the Segura Basin who depend on the transferred volumes, we propose the establishment of water option contracts between both basins that represents an institutional innovation with respect to previous inter-basin spot market experiences. Based on the draft of the new Tagus Basin Plan, we propose both a modification of the Transfer?s management rule and an innovative inter-basin option contract. The main goal of the paper is to define this contract and evaluate it with respect to non-market scenarios. We also assess the resulting impact on environmental flows in the Tagus River and water availability for users in the Segura Basin, together with the economic impacts of such contract on both basins. Our results show that the proposed option contract would reduce the impact of a change in the transfer?s management rule, and reduce the supply risks of the recipient area.

Towards workflow ecosystems through standard representations

Workflows are increasingly used to manage and share scientific computations and methods. Workflow tools can be used to design, validate, execute and visualize scientific workflows and their execution results. Other tools manage workflow libraries or mine their contents. There has been a lot of recent work on workflow system integration as well as common workflow interlinguas, but the interoperability among workflow systems remains a challenge. Ideally, these tools would form a workflow ecosystem such that it should be possible to create a workflow with a tool, execute it with another, visualize it with another, and use yet another tool to mine a repository of such workflows or their executions. In this paper, we describe our approach to create a workflow ecosystem through the use of standard models for provenance (OPM and W3C PROV) and extensions (P-PLAN and OPMW) to represent workflows. The ecosystem integrates different workflow tools with diverse functions (workflow generation, execution, browsing, mining, and visualization) created by a variety of research groups. This is, to our knowledge, the first time that such a variety of workflow systems and functions are integrated.

Evaluating the spatial and social equity effects of road pricing in the European urban context: the Madrid Metropolitan Area.

The paper explores the spatial and social impacts arising from implementation of a road-pricing scheme in the Madrid Metropolitan Area (MMA). Our analytical focus is on understanding the effects of the scheme on the transport accessibility of different social groups within the MMA. We define an evaluation framework to appraise the accessibility of different districts within the MMA in terms of the actual and perceived cost of using the road infrastructure "before" and "after" the implementation of the scheme. The framework was developed using quantitative survey data and qualitative data from focus group discussions with residents. We then simulated user behaviors (mode and route choice) based on the empirical evidence from a travel demand model for the MMA. The results from our simulation model demonstrated that implementation of the toll on the orbital metropolitan motorways (M40, M30, for example) decreases accessibility, mostly in the districts where there are no viable public transport alternatives. Our key finding is that the economic burden of the road-pricing scheme particularly affects unskilled and lower income individuals living in the south of the MMA. Consequently lower income people reduce their use of tolled roads and have to find new arrangements for these trips: i.e. switch to the public transport, spend double the time for their commuter trips or stay at home. The results of our research could be applicable more widely for anyone wishing to better understand the important relationship between increased transport cost and social equity, especially where there is an intention to introduce similar road-pricing schemes within the urban context.

A proposal for a modular and application-aware autonomic manager of private cloud infrastructures

Recientemente, el paradigma de la computación en la nube ha recibido mucho interés por parte tanto de la industria como del mundo académico. Las infraestructuras cloud públicas están posibilitando nuevos modelos de negocio y ayudando a reducir costes. Sin embargo, una compañía podría desear ubicar sus datos y servicios en sus propias instalaciones, o tener que atenerse a leyes de protección de datos. Estas circunstancias hacen a las infraestructuras cloud privadas ciertamente deseables, ya sea para complementar a las públicas o para sustituirlas por completo. Por desgracia, las carencias en materia de estándares han impedido que las soluciones para la gestión de infraestructuras privadas se hayan desarrollado adecuadamente. Además, la multitud de opciones disponibles ha creado en los clientes el miedo a depender de una tecnología concreta (technology lock-in). Una de las causas de este problema es la falta de alineación entre la investigación académica y los productos comerciales, ya que aquella está centrada en el estudio de escenarios idealizados sin correspondencia con el mundo real, mientras que éstos consisten en soluciones desarrolladas sin tener en cuenta cómo van a encajar con los estándares más comunes o sin preocuparse de hacer públicos sus resultados. Con objeto de resolver este problema, propongo un sistema de gestión modular para infraestructuras cloud privadas enfocado en tratar con las aplicaciones en lugar de centrarse únicamente en los recursos hardware. Este sistema de gestión sigue el paradigma de la computación autónoma y está diseñado en torno a un modelo de información sencillo, desarrollado para ser compatible con los estándares más comunes. Este modelo divide el entorno en dos vistas, que sirven para separar aquello que debe preocupar a cada actor involucrado del resto de información, pero al mismo tiempo permitiendo relacionar el entorno físico con las máquinas virtuales que se despliegan encima de él. En dicho modelo, las aplicaciones cloud están divididas en tres tipos genéricos (Servicios, Trabajos de Big Data y Reservas de Instancias), para que así el sistema de gestión pueda sacar partido de las características propias de cada tipo. El modelo de información está complementado por un conjunto de acciones de gestión atómicas, reversibles e independientes, que determinan las operaciones que se pueden llevar a cabo sobre el entorno y que es usado para hacer posible la escalabilidad en el entorno. También describo un motor de gestión encargado de, a partir del estado del entorno y usando el ya mencionado conjunto de acciones, la colocación de recursos. Está dividido en dos niveles: la capa de Gestores de Aplicación, encargada de tratar sólo con las aplicaciones; y la capa del Gestor de Infraestructura, responsable de los recursos físicos. Dicho motor de gestión obedece un ciclo de vida con dos fases, para así modelar mejor el comportamiento de una infraestructura real. El problema de la colocación de recursos es atacado durante una de las fases (la de consolidación) por un resolutor de programación entera, y durante la otra (la online) por un heurístico hecho ex-profeso. Varias pruebas han demostrado que este acercamiento combinado es superior a otras estrategias. Para terminar, el sistema de gestión está acoplado a arquitecturas de monitorización y de actuadores. Aquella estando encargada de recolectar información del entorno, y ésta siendo modular en su diseño y capaz de conectarse con varias tecnologías y ofrecer varios modos de acceso. ABSTRACT The cloud computing paradigm has raised in popularity within the industry and the academia. Public cloud infrastructures are enabling new business models and helping to reduce costs. However, the desire to host company’s data and services on premises, and the need to abide to data protection laws, make private cloud infrastructures desirable, either to complement or even fully substitute public oferings. Unfortunately, a lack of standardization has precluded private infrastructure management solutions to be developed to a certain level, and a myriad of diferent options have induced the fear of lock-in in customers. One of the causes of this problem is the misalignment between academic research and industry ofering, with the former focusing in studying idealized scenarios dissimilar from real-world situations, and the latter developing solutions without taking care about how they f t with common standards, or even not disseminating their results. With the aim to solve this problem I propose a modular management system for private cloud infrastructures that is focused on the applications instead of just the hardware resources. This management system follows the autonomic system paradigm, and is designed around a simple information model developed to be compatible with common standards. This model splits the environment in two views that serve to separate the concerns of the stakeholders while at the same time enabling the traceability between the physical environment and the virtual machines deployed onto it. In it, cloud applications are classifed in three broad types (Services, Big Data Jobs and Instance Reservations), in order for the management system to take advantage of each type’s features. The information model is paired with a set of atomic, reversible and independent management actions which determine the operations that can be performed over the environment and is used to realize the cloud environment’s scalability. From the environment’s state and using the aforementioned set of actions, I also describe a management engine tasked with the resource placement. It is divided in two tiers: the Application Managers layer, concerned just with applications; and the Infrastructure Manager layer, responsible of the actual physical resources. This management engine follows a lifecycle with two phases, to better model the behavior of a real infrastructure. The placement problem is tackled during one phase (consolidation) by using an integer programming solver, and during the other (online) with a custom heuristic. Tests have demonstrated that this combined approach is superior to other strategies. Finally, the management system is paired with monitoring and actuators architectures. The former able to collect the necessary information from the environment, and the later modular in design and capable of interfacing with several technologies and ofering several access interfaces.