Evaluation via multivariate techniques of scale factor variability in the rietveld method applied to quantitative phase analysis with X ray powder diffraction

ABSTRACT: The present work uses multivariate statistical analysis as a form of establishing the main sources of error in the Quantitative Phase Analysis (QPA) using the Rietveld method. The quantitative determination of crystalline phases using x ray powder diffraction is a complex measurement process whose results are influenced by several factors. Ternary mixtures of Al2O3, MgO and NiO were prepared under controlled conditions and the diffractions were obtained using the Bragg-Brentano geometric arrangement. It was possible to establish four sources of critical variations: the experimental absorption and the scale factor of NiO, which is the phase with the greatest linear absorption coefficient of the ternary mixture; the instrumental characteristics represented by mechanical errors of the goniometer and sample displacement; the other two phases (Al2O3 and MgO); and the temperature and relative humidity of the air in the laboratory. The error sources excessively impair the QPA with the Rietveld method. Therefore it becomes necessary to control them during the measurement procedure.

Contrast sensitivity of pattern transient VEP components: contribution from M and P pathways

The purpose of this study was to compare contrast sensitivity estimated from transient visual evoked potentials (VEPs) elicited by achromatic pattern-reversal and pattern-onset/offset modes. The stimuli were 2-cpd, achromatic horizontal gratings presented either as a 1 Hz pattern reversal or a 300 ms onset/700 ms offset stimulus. Contrast thresholds were estimated by linear regression to amplitudes of VEP components vs. the logarithm of the stimulus contrasts, and these regressions were extrapolated to the zero amplitude level. Contrast sensitivity was defined as the inverse of contrast threshold. For pattern reversal, the relation between the P100 amplitude and log of the stimulus contrast was best described by two separate linear regressions. For the N135 component, a single straight line was sufficient. In the case of pattern onset/offset for both the C1 and C2 components, single straight lines described their amplitude vs. log contrast relations in the medium-to-low contrast range. Some saturation was observed for C2 components. The contrast sensitivity estimated from the low-contrast limb of the P100, from the N135, and from the C2 were all similar but higher than those obtained from the high-contrast limb of the P100 and C1 data, which were also similar to each other. With 2 cpd stimuli, a mechanism possibly driven by the M pathway appeared to contribute to the P100 component at medium-to-low contrasts and to the N135 and C2 components at all contrast levels, whereas another mechanism, possibly driven by the P and M pathways, appeared to contribute to the P100 component at high contrast and C1 component at all contrast levels.

Lateral interactions in visual perception of temporal signals: cortical and subcortical components

The aim of this work was to isolate and investigate subcortical and cortical lateral interactions involved in flicker perception. We quantified the perceived flicker strength (PFS) in the center of a test stimulus which was simultaneously modulated with a surround stimulus (50% Michelson contrast in both stimuli). Subjects were requested to adjust the modulation depth of a separate matching stimulus that was physically identical to the center of the test stimulus but without the surround. Using LCD goggles, synchronized to the frame rate of a CRT screen, the center and surround could be presented monoptically or dichoptically. In the monoptic condition, center-surround interactions can have both subcortical and cortical origins. In the dichoptic condition, center-surround interactions cannot occur in the retina and the LGN, therefore isolating a cortical mechanism. Results revealed both a strong monoptic (subcortical plus cortical) lateral interaction and a weaker dichoptic (cortical) lateral interaction. Subtraction of the dichoptic from the monoptic data revealed a subcortical mechanism of the lateral interaction. While the modulation of the cortical PFS component showed a low-pass temporal-frequency tuning, the modulation of the subcortical PFS component was maximal at 6 Hz. These findings are consistent with two separate temporal channels influencing the monoptic PFS, each with distinct lateral interactions strength and frequency tuning characteristics. We conclude that both subcortical and cortical lateral interactions modulate flicker perception.

Efeito sinérgico do estresse hídrico e da toxidez de alumínio no acúmulo de prolina em Cajanus cajan (L.) Millsp. cultivado em hidroponia

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Morphologic characterization of spiked pepper's germplasm

Pimenta-de-macaco é uma espécie que possui propriedades que permitem o desenvolvimento de defensivos agrícolas naturais e medicamentos, apresentando, portanto, grande potencial de uso pela humanidade. Com o objetivo de determinar a variabilidade fenotípica, foram estudadas 41 matrizes amostradas nos Estados do Pará e Amazonas. Utilizou-se análises de componentes principais e critério de Jolliffe para descarte de variáveis, subsidiado pela correlação de Pearson. Foram necessários sete componentes para explicar 80% da variação. O rendimento de óleo essencial e o número de folhas por ramo foram sugeridos para descarte por serem as características que menos contribuíram para a variação total. A dispersão gráfica 3D formou um grupo relativamente homogêneo e contínuo, permitindo identificar um par divergente: PA-020 (Marabá-PA) e PA-035 (Santa Isabel-PA). Concluiu-se que os caracteres analisados possuem variabilidade potencialmente capaz de discriminar as matrizes, com 83,3% de tais caracteres podendo ser utilizados para este objetivo. Os genótipos divergentes, identificados na análise gráfica 3D, podem ser usados em programas de melhoramento para obtenção de genótipos superiores. A comparação com os dados moleculares, previamente existentes, de alguns desses genótipos permite concluir, também, que a caracterização molecular, apesar de apresentar certo grau de concordância com a caracterização morfológica, teve maior poder discriminatório, utilizando um menor número de genótipos e procedências, identificando grupos dissimilares e genótipos divergentes, embora analisado por método estatístico multivariado diferente.

Avaliação dos marcadores clínicos e inflamatórios da doença hepática gordurosa não alcoólica em mulheres na pós-menopausa com síndrome metabólica

Pós-graduação em Ginecologia, Obstetrícia e Mastologia - FMB

Indicador multivariado policórico: proposta de indicador para o diagnóstico da aprendizagem organizacional

Pós-graduação em Engenharia Mecânica - FEG

Gráficos de controle para monitoramento de processos multivariados

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Análise e extração de características de imagens termográficas utilizando componentes principais

Pós-graduação em Engenharia Mecânica - FEIS

Divergência genética entre acessos de cártamo (Carthamus tinctorius L.)

Pós-graduação em Agronomia (Agricultura) - FCA

Seleção de características morfofuncionais de cavalos da raça Mangalarga Marchador por meio da análise de componentes principais

Records from 14,288 animals of the Mangalarga Marchador breed, born from 1990 to 2005, were used to discard morphofunctional traits in a principal component analysis. The following traits were used: height at withers, height at croup, lengths of head, neck, back, croup, hip length and body, widths of head, hip width, thorax perimeter, cannon bone circumference and gait score. For the traits considered it was observed that 7 principal components showed variation lower than 0.7; suggesting that seven variables could be discarded. The reason is that when variable are highly correlated with the principal components of smaller variance, their variation is practically insignificant. Based on those results the recommendation is to maintain the following traits for future research with this database: gait score, height at croup, length of back, length of croup, width of head and cannon bone circumference.

Discrimination of soybean seed lots by multivariate exploratory techniques

Physiological potential characterization of seed lots is usually performed by germination and vigor tests; however, the choice of a single test does not reflect such potential, once each test assesses seeds of differentiated mode. Multivariate techniques allow understanding structural dependence contained in each variable, as well as characterize groups of seed lots according to specific standards. The study aimed at evaluating variability among soybean seed lots and discriminate these lots by multivariate exploratory techniques as function of seed vigor. Experiment was performed with 20 soybean seed lots (10 lots cv. BRS Valiosa RR and 10 lots cv. M-SOY 7908 RR). Seed physiological potential was assessed by testing for: germination (standard, and under different water availability); vigor (accelerated aging and electrical conductivity); and field seedling emergence. Cluster analysis of seed lots, as well as Principal Component Analysis was performed using data obtained on all tests. Multivariate techniques allowed stratifying seed lots into two distinct groups. Principal Component Analysis showed that values obtained for variables: field seedling emergence, accelerated aging, and germination under different water availability were linked to BRS Valiosa RR; while to variables germination and electrical conductivity, were linked to M-SOY 7908 RR.

Multivariate approach in the selection of superior soybean progeny which carry the RR gene

Efficiency in the use of genetic variability, whether existing or created, increases when properly explored and analysed. Incorporation of biotechnology into breeding programs has been the general practice. The challenge for the researcher is the constant development of new and improved cultivars. The aim of this experiment was to select progenies with superior characteristics, whether or not carriers of the RR gene, derived from bi-parental crosses in the soybean, with the help of multivariate techniques. The experiment was carried out in a family-type experimental design, including controls, during the agricultural year 2010/2011 and 2011/2012 in Jaboticabal in the Brazilian State of São Paulo. From the F3 generation, phenotypically superior plants were selected, which were evaluated for the following traits: number of days to flowering; number of days to maturity; height of first pod insertion; plant height at maturity; lodging; agronomic value; number of branches; number of pods per plant; 100-seed weight; number of seeds per plant; grain yield per plant. Given the results, it appears possible to select superior progeny by principal component analysis. Cluster analysis using the K-means method links progeny according to the most important characteristics in each group and identifies, by the Ward method and by means of a dendrogram, the structure of similarity and divergence between selected progeny. Both methods are effective in aiding progeny selection.

Análise da relação entre manufatura enxuta e desempenho operacional de empresas do setor automotivo no Brasil

Arguments that lean manufacturing can positively relate with the operational performance of companies have been spreading the literature since the 1990s. However, there is a theoretical and empirical gap on this issue that needs further empirical evidence to validate or refute these arguments to the Brazilian reality. Hence, this research aims to, empirically, verify if the lean manufacturing positively influences the performance of the operations of companies in the Brazilian automotive industry, focusing on the segment of automotive parts and components. Methodologically, we carried out a survey of 75 companies in the mentioned sector. The data were analyzed using Structural Equation Modeling, a second-generation multivariate analysis. The main results of this research are: in fact, lean manufacturing positively affects the operational performance of the studied companies, validating the main hypothesis stated in this article, but this relation is just considered weak, although positive; all lean manufacturing practices analyzed were encountered in the reality, especially for the variable continuous improvement, with the highest average and the correlation between the adoption of Kanban and Just in Time; the operational performance construct has some practices/measures identified by the literature, which have not been validated by the studied sector, as innovation (new products) and quality.

Caracterização de um latossolo em sistemas agroflorestais e mata com o uso de análise estatística multivariada

Pós-graduação em Agronomia (Ciência do Solo) - FCAV