Mechanical fatigue performance of PCL-chondroprogenitor constructs after cell culture under bioreactor mechanical stimulus

In tissue engineering of cartilage, polymeric scaffolds are implanted in the damaged tissue and subjected to repeated compression loading cycles. The possibility of failure due to mechanical fatigue has not been properly addressed in these scaffolds. Nevertheless, the macroporous scaffold is susceptible to failure after repeated loading-unloading cycles. This is related to inherent discontinuities in the material due to the micropore structure of the macro-pore walls that act as stress concentration points. In this work, chondrogenic precursor cells have been seeded in Poly-ε-caprolactone (PCL) scaffolds with fibrin and some were submitted to free swelling culture and others to cyclic loading in a bioreactor. After cell culture, all the samples were analyzed for fatigue behavior under repeated loading-unloading cycles. Moreover, some components of the extracellular matrix (ECM) were identified. No differences were observed between samples undergoing free swelling or bioreactor loading conditions, neither respect to matrix components nor to mechanical performance to fatigue. The ECM did not achieve the desired preponderance of collagen type II over collagen type I which is considered the main characteristic of hyaline cartilage ECM. However, prediction in PCL with ECM constructs was possible up to 600 cycles, an enhanced performance when compared to previous works. PCL after cell culture presents an improved fatigue resistance, despite the fact that the measured elastic modulus at the first cycle was similar to PCL with poly(vinyl alcohol) samples. This finding suggests that fatigue analysis in tissue engineering constructs can provide additional information missed with traditional mechanical measurements.

Thin films composed of gold nanoparticles dispersed in a dielectric matrix: the influence of the host matrix on the optical and mechanical responses

Gold nanoparticles were dispersed in two different dielectric matrices, TiO2 and Al2O3, using magnetron sputtering and a post-deposition annealing treatment. The main goal of the present work was to study how the two different host dielectric matrices, and the resulting microstructure evolution (including both the nanoparticles and the host matrix itself) promoted by thermal annealing, influenced the physical properties of the films. In particular, the structure and morphology of the nanocomposites were correlated with the optical response of the thin films, namely their localized surface plasmon resonance (LSPR) characteristics. Furthermore, and in order to scan the future application of the two thin film system in different types of sensors (namely biological ones), their functional behaviour (hardness and Young's modulus change) was also evaluated. Despite the similar Au concentrations in both matrices (~ 11 at.%), very different microstructural features were observed, which were found to depend strongly on the annealing temperature. The main structural differences included: (i) the early crystallization of the TiO2 host matrix, while the Al2O3 one remained amorphous up to 800 °C; (ii) different grain size evolution behaviours with the annealing temperature, namely an almost linear increase for the Au:TiO2 system (from 3 to 11 nm), and the approximately constant values observed in the Au:Al2O3 system (4–5 nm). The results from the nanoparticle size distributions were also found to be quite sensitive to the surrounding matrix, suggesting different mechanisms for the nanoparticle growth (particle migration and coalescence dominating in TiO2 and Ostwald ripening in Al2O3). These different clustering behaviours induced different transmittance-LSPR responses and a good mechanical stability, which opens the possibility for future use of these nanocomposite thin film systems in some envisaged applications (e.g. LSPR-biosensors).

Evolution of the functional properties of titanium–silver thin films for biomedical applications: Influence of in-vacuum annealing

In this work, the thermal stability of TiAgx thin films, deposited by magnetron sputtering, was evaluated, envisaging their application in biomedical devices, namely as electrodes for biosignal acquisition. Based on the composition and microstructural characterization, a set of four representative TiAgx thin films was selected in order to infer whether they are thermally stable in terms of functional properties. In order to achieve this purpose, the structural and morphological evolution of the films with annealing temperature was correlated with their electrical, mechanical and thermal properties. Two distinct zones were identified and two samples from each zone were extensively analysed. In the first zone (zone I), Ti was the main component (Ti-rich zone) while in the second, zone II, the Ag content was more significant. The selected samples were annealed in vacuum at four different temperatures up to 500 oC. For the samples produced within zone I, small microstructural changes were observed due to the recrystallization of the Ti structure and grain size increment. Also, no significant changes were observed with annealing temperature regarding the f l ’ functional properties, being thermally stable up to 500 oC. For higher Ag contents (zone II) the energy supplied by thermal treatments was sufficient to activate the crystallization of Ti-Ag intermetallic phases. A strong increase of the grain size of these phases was also reported. The structural and morphological organization proved to be determinant for the physical responses of the TiAgx system. The hardness and Y g’s modulus were significantly improved with the formation of the intermetallic phases. The silver addition and annealing treatments also played an important role in the electrical conductivity of the films, which was once again improved by the formation of Ti-Ag phases. The thermal diffusivity of the films was practically unchanged with the heat-treatment. This set of results shows that this intermetallic-like thin film system has good thermal stability up to high temperatures (as high as 500 oC), which in case of the highest Ag content zone is particularly evident for electrical and mechanical properties, showing an important improvement. Hardness increases about three times, while resistivity values become half of those from the lowest Ag contents zone. These set of characteristics are consistent with the targeted applications, namely in terms of biomedical sensing devices.

Production of elastic Chitosan/Chondroitin sulphate multilayer films for tissue regeneration

Membrane-like scaffolds are suitable to induce regeneration in many and different anatomic sites, such as periodontal membrane, skin, liver and cardiac tissues. In some circumstances, the films should adapt to geometrical changes of the attached tissues, such as in cardiac or blood vessel tissue engineering applications. In this context, we developed stretchable two-dimensional multilayer constructs through the assembling of two natural-based polyelectrolytes, chitosan (CHT) and chondroitin sulphate (CS), using the layer-by-layer methodology. The morphology, topography and the transparency of the films were evaluated. The in- fluence of genipin, a natural-derived cross-linker agent, was also investigated in the control of the mechanical properties of the CHT/CS films. The water uptake ability can be tailored by changing the cross-linker concentration, which influenced the young modulus and ultimate tensile strength. The maximum extension tends to decrease with the increase of genipin concentration, compromising the elastic properties of CHT/CS films: nevertheless using lower cross-linker contents, the ultimate tensile stress is similar to the films not cross-linked but exhibiting a significant higher modulus. The in vitro biological assays showed better L929 cell adhesion and proliferation when using the crosslinked membranes and confirmed the non-cytotoxicity of the CHT/CS films. The developed free-standing biomimetic multilayer could be designed to fulfill specific therapeutic requirements by tuning properties such as swelling, mechanical and biological performances.

Great amount of C.pneumoniae in ruptured plaque vessel segments at autopsy. A comparative study with stable plaques

A possible relationship between C.pneumoniae (CP) infection, atherosclerosis and acute myocardial infarction is a debated matter. Now we performed the search of CP in histological segments of fatal ruptured plaques and of stable plaques by histochemistry (Macchiavello stain), immunohistochemistry and in situ hybridization techniques. Electron microscopy and confocal laser microscopy techniques were used in two additional cases. The semi-quantitification of CP + cells (0-4+) and quantification of lymphocytes demonstrated greater amount of CP + cells and more inflammation in the adventitia of vulnerable plaque vessel segments than of stable ones, larger amount of CP + cells in adventitia than in the plaque and high frequency of CP + cells in all groups studied. This preliminary study strongly suggests a direct pathogenetic involvement of adventitial CP in the rupture of the atheromatous plaque, development of acute myocardial infarction and also in the development of atherosclerosis.

Beeswax organogels: Influence of gelator concentration and oil type in the gelation process

This work focused on how different types of oil phase, MCT (medium chain triglycerides) and LCT (long chain triglycerides), exert influence on the gelation process of beeswax and thus properties of the organogel produced thereof. Organogels were produced at different temperatures and qualitative phase diagrams were constructed to identify and classify the type of structure formed at various compositions. The microstructure of gelator crystals was studied by polarized light microscopy. Melting and crystallization were characterized by differential scanning calorimetry and rheology (flow and small amplitude oscillatory measurements) to understand organogels' behaviour under different mechanical and thermal conditions. FTIR analysis was employed for a further understanding of oil-gelator chemical interactions. Results showed that the increase of beeswax concentration led to higher values of storage and loss moduli (G, G) and complex modulus (G*) of organogels, which is associated to the strong network formed between the crystalline gelator structure and the oil phase. Crystallization occurred in two steps (well evidenced for higher concentrations of gelator) during temperature decreasing. Thermal analysis showed the occurrence of hysteresis between melting and crystallization. Small angle X-ray scattering (SAXS) analysis allowed a better understanding in terms of how crystal conformations were disposed for each type of organogel. The structuring process supported by medium or long-chain triglycerides oils was an important exploit to apprehend the impact of different carbon chain-size on the gelation process and on gels' properties.

Experimental procedures for the identification of material properties of intervertebal disc - a contribution for the development of biomimetic substitutes for the nucleus pulposus

Tese de Doutoramento em Engenharia Mecânica.

Neonate Aortic Stenosis: Importance of Myocardial Perfusion in Prognosis

OBJECTIVE: To analyze our experience with percutaneous aortic balloon valvuloplasty in newborn infants with aortic stenosis, emphasizing the extraordinary importance of myocardial perfusion.METHODS: Over a 10-year-period, 21 neonates underwent percutaneous aortic balloon valvuloplasty. Age ranged from 2 to 27 days, weight ranged from 2.2 to 4.1 kg and 19 were males. All patients presented with congestive heart failure that could not be treated clinically. The onset of symptoms in the first week of life occurred in 9 patients considered as having critical aortic stenosis. Severe aortic stenosis occurred in 12 patients with the onset of symptoms in the second week of life.RESULTS: Mortality reached 100% in the patients with critical aortic stenosis. The procedure was considered effective in the 12 patients with severe aortic stenosis. Vascular complications included the loss of pulse in 12 patients and rupture of the femoral artery in 2 patients. Cardiac complications included acute aortic regurgitation in 2 patients and myocardial perforation in one. In an 8.2±1.3-year follow-up, 5 of the 12 patients died (2 patients due to septicemia and 3 patients due to congestive heart failure). Five of the other 7 patients underwent a new procedure and 2 required surgery.CONCLUSION: Percutaneous aortic valvuloplasty in neonates is not an effective procedure in the 1st week of life, because at this age the common presentation is cardiogenic shock. It is possible that, in those patients with critical aortic stenosis, dilation of the aortic valve during fetal life may change the prognosis of its clinical outcome.

Insights on the mechanical behavior of keratin fibrils

Supplementary data associated with this article can be found,in the online version, at http://dx.doi.org/10.1016/j.ijbiomac.2016.05.018.

Estudio de la muerte celular por Apoptosis en el ovario de Columba maculosa y Columbina picui (Aves:Columbidae) durante el Ciclo Reproductivo Anual. Study of cell death by apoptosis in the ovary of Columba maculosa and Columbina picui (Aves: Columbidae) during the reproductive annual cycle.

En este trabajo se analizarán las características estructurales, cuantitativas y el proceso de muerte celular por apoptosis en el ovario de C. maculosa y C.picui con el objetivo de aportar conocimientos básicos a la biología reproductiva de estas aves. Cincuenta hembras adultas de cada especie se capturarán en el Dpto. Río Primero (Pcia. de Cba), R. Argentina, durante el ciclo reproductivo 2011-2012. Las muestras de ovarios se fijaran en Formalina Neutra pH 7.0, procesarán con la técnica de inclusión en parafina y colorearan con Hematoxilina /Eosina y Reacción Nuclear de Feulgen. Cinco muestras serán utilizadas para la determinación de muerte celular por apoptosis con la técnica de TUNEL. Se estudiarán las características morfohistológicas del ovario de C.maculosa y C. picui e identificarán, categorizarán y cuantificarán los folículos atrésicos no bursting (folículos atrésicos previtelogénicos y vcitelogénicos pequeños que conservan la integridad de la pared folicular) y bursting (folículos vitelogénicos mayores de 2 mm que liberar el contenido folicular por ruptura de la pared folicular) durante el ciclo reproductivo anual. Mediante la marcación de ADN fragmentado, se revelará la muerte celular por apoptosis en las células granulosas de los folículos atrésicos. Se compararán las semejanzas y diferencias estructurales y cuantitativas y el proceso de muerte celular en los folículos regresivos entre las dos especies. Los resultados de este trabajo representarán un importante aporte al conocimiento de la atresia folicular como así también a la muerte celular, un proceso estrechamente asociado a la misma, aún poco estudiado en el ovario de las aves. In this work we analyse the structural, quantitative and the process of the cell death by apoptosis in the ovary of Columba maculosa and Columbina picui in order of providing basic knowledge of reproductive biology of these birds. Fifty adult female of each species will be caught in the Río Primero (Pcia. Cba) R.Argentina, during 2011 - 2012. The ovarian samples will be fixed en neutral buffered Formalin (pH 7.0), processed with the technique of inclusion in paraffin and stained with Haematoxylin - Eosin, and nuclear Reaction of Feulgen. Five samples will be used to reveal cell death by apoptosis with the technique of TUNEL. Will be studied the morphohistological characteristics of ovary of both species, and identify, categorize and quantify the atretic follicles over the cycle, the non-bursting (pre-vitellogenic follicles and vitellogenic small < 2 mm, involution an without follicular rupture) and bursting (vitellogenic follicle > 2 mm in the which the yolk falls into the peritoneum due to rupture of with out put of the wall follicular). Will be revealed DNA fragmentation in the granulosa cells of the atretic follicles. Will compared the similaritues and differences in structure and quantitative and the cell death process by apoptosis in the regresive follicles, between the two species. The results of this study represent an important contribution to the knowledge of follicular atresia as well cell death a process closely associated with it and still poorly studied in the ovary of birds.

Design of a bifurcated stent graft, with its accompanying delivery system.

Abdominal Aortic Aneurysms (AAA) haemorhaging is a life-threatening disease. An aneurysm is a permanent swelling of an artery due to a weakness in its wall. Current surgical repair involves opening the chest or abdomen, gaining temporary vascular control of the aorta and suturing a prosthetic graft to the healthy aorta within the aneurysm itself The outcome of this surgical approach is not perfect, and the quality of life after this repair is impaired by postoperative pain, sexual dysfunction, and a lengthy hospital stay resulting in high health costs. All these negative effects are related to the large incision and extensive tissue dissection. Endovascular grafting is an alternative to the standard surgical method. This treatment is a less invasive method of treating aortic aneurysms. It involves a surgical exposure of the common femoral arteries where the stent graft can be inserted through by an over-the-wire technique. All manipulations are controlled from a remote place by the use of a catheter and this technique avoids the need to directly expose the diseased artery through a large incision or an extensive dissection. The proposed design method outlined in this project is to develop the endovascular approach. The main aim is to design an unitary bifurcated stent graft (1 e- bifurcated graft as a single component) to treat these Abdominal Aortic Aneurysms. This includes the delivery system and deployment mechanism necessary to first accurately position the stent graft across the aneurysm sac and also across the iliac bifurcation, and secondly fix the stent graft in position by using expandable metal stents. Thus, excluding the aneurysm from the circulation and therefore preventing rupture. Miniaturisation is a critical aspect of this design, as the smaller the crimped stent graft the easier to guide through the vascular system to the desired location. Biocompatibility is an important aspect. The preferred materials for this prosthesis are to use Shape Memory Alloys for the stent and a multifilament fabric for the graft. A taper design is applied for the geometry as this gives a favourable flow characteristic and reduced wave reflections. Adequate testing of the stent graft to prove its durability and the ease of the method of deployment is a prerequisite. A bench test facility has being designed and build to replicate the cardiovascular system and the disease in question aortic aneurysms at the iliac bifurcation. The testing here shows the feasibility of the proposed delivery system and the durability of the stent graft across the aneurysm sac. Finally, these endovascular treatments offer the economic advantage of short hospital stays or even treatment as an outpatient, as well as elimination of the need for postoperative intensive care The risk of developing an aneurysm increases with age, that is one of the mam reasons to look for less invasive ways of treating aneurysms. Consequently, there is enormous pressure to develop and use these devices rapidly.

Development of an in vitro model for studying aneurysms

The aims of this project was to develop an arterial aneurysm using either enzymatic or laser degradation of the arterial wall without affecting the viability of the tissue and to cultivate the arteries under pulsatile flow conditions in a vascular bioreactor with a view to investigate the progress of the disease. Characteristics of aneurysms are the degradation of smooth muscle cells, collagen and elastin. Detached smooth muscle cells and degradation of the collagen matrix and elastin fibres were observed in arteries degraded with enzymes elastase and collagenase. Only remnants of the arterial wall were detected after cultivation. This might be a suitable model for late stage aneurysms. Arteries treated with the laser system showed no charring or heat damage of the not dissected area. Collagen matrix, smooth muscle cells and elastin fibres were intact. A clear defined cut was made in a depth of 200 μm and tissue was removed. Following cultivation of these arteries a dilation of the laser-eroded area was observed. This model can mimic atherosclerotic aneurysms, when plaques weaken the tunica media of the blood vessel wall and rupture. Limitations of this study were contamination of the bioreactor system and a low number of cultivations. The aim to generate a living arterial aneurysm in vitro was not achieved. Tissue viability decreased to the level of negative controls after cultivation.

Population and reproductive features of the western Atlantic hermit crab Pagurus criniticornis (Anomura, Paguridae) from Anchieta Island, southeastern Brazil

The population of the hermit crab Pagurus criniticornis (Dana, 1852) was studied based on seasonal abundance, size frequency distribution, sex ratio, reproductive period, fecundity and shell relationship. Specimens were collected monthly by SCUBA diving in the infralittoral area of Anchieta Island, Ubatuba. A total of 1,017 individuals was analyzed. Animal size (minimum and maximum shield length, respectively) was 0.7 and 2.9 mm for males, 0.6 and 2.8 mm for non-ovigerous females, and 1.0 and 2.5 mm for ovigerous females. The sex ratio was 1:1.29. Sexual dimorphism was recorded by the presence of males in the largest size classes. Ovigerous females were captured during all months along the year, with percentages varying from 8% (July) to 84.3% (February) in relation to the total females collected. Mean ± SD fecundity was 168 ± 125 eggs and tended to increase with increasing hermit size. Shells of four gastropod species [Cerithium atratum (Born, 1778), Morula nodulosa (Adams, 1845), Anachis lyrata (Sowerby, 1832) and Modulus modulus (Linnaeus, 1758)] were occupied by ovigerous females of P. criniticornis but fecundity was not significantly different in relation to the different shell types. The profile showed continuous and intense reproduction of P. criniticornis probably related to strategies developed to compensate for interspecific competition in the studied insular area.

Chronic murine myocarditis due to Trypanosoma cruzi: an ultrastructural study and immunochemical characterization of cardiac interstitial matrix

In an attempt to define the mouse-model for chronic Chagas' disease, a serological, histopathological and ultrastructural study as well as immunotyping of myocardium collagenic matrix were performed on Swiss mice, chronically infected with Trypanosoma cruzi strains: 21 SF and mambaí (Type II); PMN and Bolivia (Type III), spontaneously surviving after 154 to 468 days of infection. Haemagglutination and indirect immunofluorescence tests showed high titres of specific antibodies. The ultrastructural study disclosed the cellular constitution of the inflammatory infiltrate showing the predominance of monocytes, macrophages with intense phagocytic activity, fibroblasts, myofibroblasts and abundant collagen matrix suggesting the association of the inflammatory process with fibrogenesis in chronic chagasic cardiomyopathy. Artertolar and blood capillary alterations together with dissociation of cardiac cells from the capillary wall by edema and inflammation were related to ultrastructural lesions of myocardial cells. Rupture of parasitized cardiac myocells contribute to intensify the inflammatory process in focal areas. Collagen immunotyping showed the predominance of Types III and IV collagen. Collagen degradation and phagocytosis were present suggesting a reversibility of the fibrous process. The mouse model seems to be valuable in the study of the pathogenetic mechanisms in Chagas cardiomyopathy, providing that T. cruzi strains of low virulence and high pathogenecity are used.

Contribution to the geology of Thailand and implications for the geodynamic evolution of Southeast Asia

Abstract The purpose of this study is to unravel the geodynamic evolution of Thailand and, from that, to extend the interpretation to the rest of Southeast Asia. The methodology was based in a first time on fieldwork in Northern Thailand and Southernmost Myanmar, using a multidisciplinary approach, and then on the compilation and re-interpretation, in a plate tectonics point of view, of existing data about the whole Southeast Asia. The main results concern the Nan-Uttaradit suture, the Chiang Mai Volcanic Belt and the proposition of a new location for the Palaeotethys suture. This led to the establishment of a new plate tectonic model for the geodynamic evolution of Southeast Asia, implying the existence new terranes (Orang Laut and the redefinition of Shan-Thai) and the role of the Palaeopacific Ocean in the tectonic development of the area. The model proposed here considers the Palaeotethys suture as located along the Tertiary Mae Yuam Fault, which represents the divide between the Cimmerian Sibumasu terrane and the Indochina-derived Shan-Thai block. The term Shan-Thai, previously used to define the Cimmerian area (when the Palaeotethys suture was thought to represented by the Nan-Uttaradit suture), was redefined here by keeping its geographical location within the Shan States of Myanmar and Central-Northern Thailand, but attributing it an East Asian Origin. Its detachment from Indochina was the result of the Early Permian opening of the Nan basin. The Nan basin closed during the Middle Triassic, before the deposition of Carnian-Norian molasse. The modalities of the closure of the basin imply a first phase of Middle Permian obduction, followed by final eastwards subduction. The Chiang Mai Volcanic Belt consists of scattered basaltic rocks erupted at least during the Viséan in an extensional continental intraplate setting, on the Shan-Thai part of the Indochina block. The Viséan age was established by the dating of limestone stratigraphically overlying the basalts. In several localities of the East Asian Continent, coeval extensional features occur, possibly implying one or more Early Carboniferous extensional events at a regional scale. These events occurred either due to the presence of a mantle plume or to the roll-back of the Palaeopacific Ocean, subducting beneath Indochina and South China, or both. The Palaeopacific Ocean is responsible, during the Early Permian, for the opening of the Song Ma and Poko back-arcs (Vietnam) with the consequent detachment of the Orang Laut Terranes (Eastern Vietnam, West Sumatra, Kalimantan, Palawan, Taiwan). The Late Triassic/Early Jurassic closure of the Eastern Palaeotethys is considered as having taken place by subduction beneath its southern margin (Gondwana), due to the absence of Late Palaeozoic arc magmatism on its northern (Indochinese) margin and the presence of volcanism on the Cimmerian blocks (Mergui, Lhasa). Résumé Le but de cette étude est d'éclaircir l'évolution géodynamique de la Thaïlande et, à partir de cela, d'étendre l'interprétation au reste de l'Asie du Sud-Est. La méthodologie utilisée est basée dans un premier temps sur du travail de terrain en Thaïlande du nord et dans l'extrême sud du Myanmar, en se basant sur une approche pluridisciplinaire. Dans un deuxième temps, la compilation et la réinterprétation de données préexistantes sur l'Asie du Sud-est la été faite, dans une optique basée sur la tectonique des plaques. Les principaux résultats de ce travail concernent la suture de Nan-Uttaradit, la « Chiang Mai Volcanic Belt» et la proposition d'une nouvelle localité pour la suture de la Paléotethys. Ceci a conduit à l'établissement d'un nouveau modèle pour l'évolution géodynamique de l'Asie du Sud-est, impliquant l'existence de nouveaux terranes (Orang Laut et Shan-Thai redéfini) et le rôle joué par le Paléopacifique dans le développement tectonique de la région. Le modèle présenté ici considère que la suture de la Paléotethys est située le long de la faille Tertiaire de Mae Yuam, qui représente la séparation entre le terrain Cimmérien de Sibumasu et le bloc de Shan-Thai, d'origine Indochinoise. Le terme Shan-Thai, anciennement utilise pour définir le bloc Cimmérien (quand la suture de la Paléotethys était considérée être représentée par la suture de Nan-Uttaradit), a été redéfini ici en maintenant sa localisation géographique dans les états Shan du Myanmar et la Thaïlande nord-centrale, mais en lui attribuant une origine Est Asiatique. Son détachement de l'Indochine est le résultat de l'ouverture du basin de Nan au Permien Inférieur. Le basin de Nan s'est fermé pendant le Trias Moyen, avant le dépôt de molasse Carnienne-Norienne. Les modalités de fermeture du basin invoquent une première phase d'obduction au Permien Moyen, suivie par une subduction finale vers l'est. La "Chiang Mai Volcanic Belt" consiste en des basaltes éparpillés qui ont mis en place au moins pendant le Viséen dans un contexte extensif intraplaque continental sur la partie de l'Indochine correspondant au bloc de Shan-Thai. L'âge Viséen a été établi sur la base de la datation de calcaires qui surmontent stratigraphiquement les basaltes. Dans plusieurs localités du continent Est Asiatique, des preuves d'extension plus ou moins contemporaines ont été retrouvées, ce qui implique l'existence d'une ou plusieurs phases d'extension au Carbonifère Inférieur a une échelle régionale. Ces événements sont attribués soit à la présence d'un plume mantellique, ou au rollback du Paléopacifique, qui subductait sous l'Indochine et la Chine Sud, soit les deux. Pendant le Permien inférieur, le Paléopacifique est responsable pour l'ouverture des basins d'arrière arc de Song Ma et Poko (Vietnam), induisant le détachement des Orang Laut Terranes (Est Vietnam, Ouest Sumatra, Kalimantan, Palawan, Taiwan). La fermeture de la Paléotethys Orientale au Trias Supérieur/Jurassique Inférieur est considérée avoir eu lieu par subduction sous sa marge méridionale (Gondwana), à cause de l'absence de magmatisme d'arc sur sa marge nord (Indochinoise) et de la présence de volcanisme sur les blocs Cimmériens de Lhassa et Sibumasu (Mergui). Résumé large public L'histoire géologique de l'Asie du Sud-est depuis environ 430 millions d'années a été déterminée par les collisions successives de plusieurs continents les uns avec les autres. Il y a environ 430 millions d'années, au Silurien, un grand continent appelé Gondwana, a commencé à se «déchirer» sous l'effet des contraintes tectoniques qui le tiraient. Cette extension a provoqué la rupture du continent et l'ouverture d'un grand océan, appelé Paléotethys, éloignant les deux parties désormais séparées. C'est ainsi que le continent Est Asiatique, composé d'une partie de la Chine actuelle, de la Thaïlande, du Myanmar, de Sumatra, du Vietnam et de Bornéo a été entraîné avec le bord (marge) nord de la Paléotethys, qui s'ouvrait petit à petit. Durant le Carbonifère Supérieur, il y a environ 300 millions d'années, le sud du Gondwana subissait une glaciation, comme en témoigne le dépôt de sédiments glaciaires dans les couches de cet âge. Au même moment le continent Est Asiatique se trouvait à des latitudes tropicales ou équatoriales, ce qui permettait le dépôt de calcaires contenant différents fossiles de foraminifères d'eau chaude et de coraux. Durant le Permien Inférieur, il y a environ 295 millions d'années, la Paléotethys Orientale, qui était un relativement vieil océan avec une croûte froide et lourde, se refermait. La croûte océanique a commencé à s'enfoncer, au sud, sous le Gondwana. C'est ce que l'on appelle la subduction. Ainsi, le Gondwana s'est retrouvé en position de plaque supérieure, par rapport à la Paléotethys qui, elle, était en plaque inférieure. La plaque inférieure en subductant a commencé à reculer. Comme elle ne pouvait pas se désolidariser de la plaque supérieure, en reculant elle l'a tirée. C'est le phénomène du «roll-back ». Cette traction a eu pour effet de déchirer une nouvelle fois le Gondwana, ce qui a résulté en la création d'un nouvel Océan, la Neotethys. Cet Océan en s'ouvrant a déplacé une longue bande continentale que l'on appelle les blocs Cimmériens. La Paléotethys était donc en train de se fermer, la Neotethys de s'ouvrir, et entre deux les blocs Cimmériens se rapprochaient du Continent Est Asiatique. Pendant ce temps, le continent Est Asiatique était aussi soumis à des tensions tectoniques. L'Océan Paléopacifique, à l'est de celui-ci, était aussi en train de subducter. Cette subduction, par roll-back, a déchiré le continent en détachant une ligne de microcontinents appelés ici « Orang Laut Terranes », séparés du continent par deux océans d'arrière arc : Song Ma et Poko. Ceux-ci sont composés de Taiwan, Palawan, Bornéo ouest, Vietnam oriental, et la partie occidentale de Sumatra. Un autre Océan s'est ouvert pratiquement au même moment dans le continent Est Asiatique : l'Océan de Nan qui, en s'ouvrant, a détaché un microcontinent appelé Shan-Thai. La fermeture de l'Océan de Nan, il y a environ 230 millions d'années a resolidarisé Shan-Thai et le continent Est Asiatique et la trace de cet événement est aujourd'hui enregistrée dans la suture (la cicatrice de l'Océan) de Nan-Uttaradit. La cause de l'ouverture de l'Océan de Nan peut soit être due à la subduction du Paléopacifique, soit aux fait que la subduction de la Paléotethys tirait le continent Est Asiatique par le phénomène du « slab-pull », soit aux deux. La subduction du Paléopacifique avait déjà crée de l'extension dans le continent Est Asiatique durant le Carbonifère Inférieur (il y a environ 340-350 millions d'années) en créant des bassins et du volcanisme, aujourd'hui enregistré en différents endroits du continent, dont la ceinture volcanique de Chiang Mai, étudiée ici. A la fin du Trias, la Paléotethys se refermait complètement, et le bloc Cimmérien de Sibumasu entrait en collision avec le continent Est Asiatique. Comme c'est souvent le cas avec les grands océans, il n'y a pas de suture proprement dite, avec des fragments de croûte océanique, pour témoigner de cet évènement. Celui-ci est visible grâce à la différence entre les sédiments du Carbonifère Supérieur et du Permieñ Inférieur de chaque domaine : dans le domaine Cimmérien ils sont de type glaciaire alors que dans le continent Est Asiatique ils témoignent d'un climat tropical. Les océans de Song Ma et Poko se sont aussi refermés au Trias, mais eux ont laissé des sutures visibles