997 resultados para Medical Agricultural GMOs
Resumo:
In Portugal, there is an old tradition in using clayey materials for therapeutic purposes. They are applied in pelotherapy, at several beaches of the Atlantic coast in the form of clay-sea water mixtures (peloids) to treat skin and rheumatic diseases. During many generations, peloids have been applied without scienti c studies that prove their therapeutic validity. In the last decade, the Portuguese scienti c community has become increasingly more interested in assessing the properties that make clayey materials suitable for therapeutic purposes. The abundance of clayey formations and the established practices of medical hydrology in our country turned this interest into a new perspective of application. The studied materials include di erent clays (in age and origin) mainly collected from well-known Mesozoic-Cenozoic formations, in some cases outcropping at beaches where empirical applications occur. This thesis focus in the study of silt-clay fraction (< 63 m).To determine their suitability for therapy, compositional, physicochemical, technological, thermal and rheological properties were assessed. Conventional techniques (XRD, XRF and Sedigraph) were used to assess compositional features of silt-clay fraction. Electron microscopy (SEM, VPSEM, HREM) was used to study the micromorphology and composition of clay fraction (< 2 m). Physicochemical properties (cation exchange and speci c surface) were assessed using the Ammonium Acetate and BET methods. Technological properties (plasticity and abrasivity indices) were assessed using the Atterberg limits and Einlehner abrasion tests. Thermal properties (speci c heat and cooling kinetics) were estimated by DSC analysis and cooling tests. Pharmacotechnical tests (compressibility index, sediment volume and Brook eld viscosity) were used to assess the powder owability as well as the physical stability and viscosity of clay-water dispersions. We selected as suitable Portuguese clays for health applications the samples A-Pe, A-Be2, A-Sd, J-Fr , M-To, C-Lu1, C-Lu2, Pl-Ba, M-Ga and J-Ab because they represent safe materials, with an adequate composition, good technological, physicochemical and thermal properties for application, also presenting an adequate rheology when dispersed in water. Their most relevant characteristics are the high clay minerals content, abundant smectite, illite and kaolinite, and safe hazardous concentrations. They also showed moderate capacity to exchange Ca 2+, high plasticity, low abrasivity, high speci c heat and slow cooling kinetics. They evidenced fair powder owability and good potential to formulate viscous dispersions when stabilized. Because the majority of the assessed characteristics are in accordance with those presented by clays applied in European spas for pelotherapy, we considered this group of clays also suitable for medical hydrology treatments in Portuguese spas.
Resumo:
This work presents the results on the development of a high pressure Xe gaseous detector envisaging medical imaging. The detector uses two VUV photosensors operating face-to-face, based on the CsI-MHSP with position discrimination capability. The known effect of the charge gain decrease with the gas pressure is compensated with a light gain using the electroluminescence process. Studies of signal amplitude, energy and position resolution are presented. On the second part, gaseous detectors based on THGEM where studied in order to fulfill the requirements of present and future high energy physics experiments. The work is focused on the application of THGEM in RICH detectors elements: a triple THGEM detector using CsI photocathodes in Ne mixtures was suggested. The ion backflow to the photocathode remains a concern and a limitation; to minimize it, the application of a new hole-structure, THCOBRA, was suggested. Preliminary results foresee good perspectives for the successful application of THCOBRA in ion back-flow suppression. This work contains several methods and measurements of the CsI photocathodes behaviour in radiation gaseous detectors. A long discussion on its issues and possible solutions are presented.
Resumo:
Apesar do recente aumento no número de estudos, os lagartos persistem como um dos grupos menos estudados em ecotoxicologia e o desconhecimento em relação à sua resposta à contaminação ambiental é enorme. A nível europeu, os lacertídeos têm sido identificados como potenciais espécies modelo para a ecotoxicologia com répteis. O principal objectivo deste projecto era determinar se um lacertídeo abundante pertencente ao género Podarcis, podia ser utilizado como bioindicador de exposição e toxicidade em zonas agrícolas. Para atingir este objectivo, utilizámos uma estratégia integrada com três fases. Numa primeira fase realizou-se um estudo de campo para documentar o tipo de exposição e parâmetros populacionais de populações de lacertídeos que ocorrem em zonas de uso intenso de pesticidas e zonas de agricultura orgânica. A segunda fase consistiu num estudo de mesocosmo em que se expuseram juvenis a um conjunto de pesticidas em condições controladas durante um período de um ano. Finalmente, a terceira fase incluiu um estudo laboratorial sobre os efeitos do clorpirifos, um dos insecticidas mais utilizado a nível global, em lagartixas. No término de cada um dos estudos, analisaram-se diversos biomarcadores e parâmetros de exposição e toxicidade a pesticidas nos diferentes indivíduos. Este conjunto abrangente de parâmetros foi analisado em diferentes níveis de organização biológica, incluindo parâmetros populacionais, bem como comportamentais, fisiológicos, bioquímicos e histológicos. Em geral, detectaram-se poucas diferenças estatísticas significativas entre as populações dos campos expostos a pesticidas e populações referência. Confirmando a dificuldade que existe em isolar os efeitos de diferentes contaminantes sobre as populações de outros factores locais, ciclos sazonais ou eventos estocásticos. As populações de P. bocagei parecem ser capazes de lidar com o nível observado de exposição a pesticidas. No entanto, indivíduos que vivem em locais expostos a pesticidas parecem estar menos adaptados ecologicamente do que aqueles que vivem em locais referência, apresentando um estado de depleção nutricional e sinais de stress metabólico. Os resultados obtidos com os animais da experiência de mesocosmo parecem reforçar estes resultados. Os animais prosperaram relativamente bem em todos os mesocosmos, independentemente do tratamento ou não com pesticidas, apresentando uma ampla gama de comportamentos naturais. A abordagem laboratorial confirmou P. bocagei como um valioso indicador de exposição sub-letal a doses ambientalmente realistas de clorpirifos. De acordo, com o conjunto d resultados obtidos, P. bocagei parece ser um bioindicador adequado de exposição a pesticidas.
Resumo:
Thermal degradation and gaseous products evolving from the pyrolysis of sewage sludge, aimed at agricultural soil amendment, were investigated using Thermogravimetric Analysis in conjunction with Fourier Transform Infrared Analysis (TG-FTIR). The materials were studied in temperatures ranging from 30 to 800 ºC. Furthermore infrared spectra of sewage sludge samples were performed as a complementary technique. In parallel the sewage sludge was spiked with ibuprofen in order to test whether the mentioned techniques are able to detect the drug. Thermal analysis showed the range of 200-400ºC as the most characteristic for weight loss, corresponding with the organic matter volatilization, while the range of 500-800ºC was also characteristic and due to the volatilization of carbonates. On the other hand, ibuprofen-spiking tests identified at temperature range (150-250ºC) where the compound totally volatilizes, therefore, in this work, the detection of ibuprofen by TGA was established for concentrations higher than 0.5 g/kg sludge, concentration 102 times higher than the concentrations measured by other authors in regular sewage sludge (Martín, et al., 2010). A correlation has been found between the ibuprofen concentrations in the sludge and the intensity of the absorption bands, both for FT-IR spectra at the maximum emission temperature for ibuprofen (232ºC) as for the FT-IR spectra of the non-pyrolyzed samples.
Resumo:
The decoupling of CAP payments leads production decisions and resources allocation to be more dependent on market prices and competitive advantages. The objective of this paper is to assess the effects of CAP trends on the montado/dehesa traditional ecosystem of Mediterranean regions in terms of farm income, land, labour and capital. A positive mathematical supply model disaggregated by the montado agro-forestry production systems of the Alentejo region in southern Portugal is developed. The results show that decoupling payments of CAP have negative economic effects on agricultural activities and resource use. Agricultural income increases with single farm payments but the foreseen increases in prices do not compensate the loss of the Agenda 2000 area payments in terms of competitiveness. These results reinforce the need to promote alternative agricultural and non-agricultural activities and policies in Mediterranean rural European areas and regions. (C) 2011 Society for Policy Modeling. Published by Elsevier Inc. All rights reserved.
Resumo:
European Agenda 2000 considers the integration of environment in CAP and the role farmers can play on natural resources management. Alternative tillage technologies to seed cereals play an important economic and environmental role on the development of a sustainable agriculture and its adoption may depend on the agricultural policy, particularly policies on income support. The results obtained clearly show that the use of alternative soil tillage technologies would be promoted by the change of supports from the first to the second pillar of CAP and we can conclude that, in general, this change will encourage a faster technological adoption. (c) 2006 Society for Policy Modeling. Published by Elsevier Inc. All rights reserved.
Resumo:
This paper presents several combined agricultural data disaggregation models in order to recover the farms' land uses, the livestock numbers and main crops' productions. The proposed approach estimates incomplete information at disaggregated level through entropy, using an information prior, and generating information for a combined calculation use of data in the estimation of other variables. The models were applied to the region of Algarve, to some rural pilot areas (Salir-Ameixial-Cachopo and Alcoutim) for livestock data, since this data in some Algarve's inland areas is needed for a European forest fire prevention project, and to the agrarian zones in a more complex framework. The results are promising. They were validated, in cross reference to real data, having proven to be valid and reliable. The total error was small and a considerable level of information heterogeneity was recovered. The total error was about 27,9% for the counties' land uses and 21% for the agrarian zones, and for the livestock it was also acceptable. The level of heterogeneity recovered was always higher than 50%, revealing some improvements regarding previous studies.
Resumo:
Dissertação de mestrado, Engenharia Informática, Faculdade de Ciências e Tecnologia, Universidade do Algarve, 2015
Resumo:
This speech is about the Agricultural Appropriation Bill, which is a bill making appropriations for the Agricultural Department of the Government for the fiscal year ending in June 30,1883. Mr. Aiken is approved by the chairman to speak and he goes on to explain that he agrees with the majority of the bill with the exception of two or three clauses. He gives the reasoning behind his objections in the rest of the speech.
Resumo:
We propose here the hypothesis that all of United Kingdom (UK) is likely to be affected by Ganoderma sp. spores, an important plant pathogen. We suggest that the main sources of this pathogen, which acts as a bioaerosol, are the widely scattered woodlands in the country, although remote sources must not be neglected. The hypothesis is based on related studies on bioaerosols and supported by new observations from a non-forest site and model calculations to support our hypothesis. Hourly concentrations of Ganoderma sp. spores were measured from 2006 to 2010 using a 7-day volumetric spore trap at the city of Worcester. The concentrations peak during the night and early in the morning. This suggests that the main spore sources are located a few hours away with respect to air masses transport and reach urban areas thanks to air masses transport. The back-trajectory analysis was applied to determine the location of Ganoderma sp. spore sources. The analysis of back-trajectories demonstrated that 78% of the air masses reached Worcester from a 180° arc direction from the East to West. Three episodes were selected for detailed investigation and they revealed that during the episodes air masses always passed main UK woodlands before the arrival in Worcester, independently of their origin, but the long distance transport under certain conditions might be possible. Our studies suggest that the sources of UK Ganoderma sp. spores are mainly to be found in UK. Hence our studies suggest that research and mitigation strategies in UK should give their main attention to national sources, without neglecting the contribution from long distance transport.
Resumo:
In this study, we utilise a novel approach to segment out the ventricular system in a series of high resolution T1-weighted MR images. We present a brain ventricles fast reconstruction method. The method is based on the processing of brain sections and establishing a fixed number of landmarks onto those sections to reconstruct the ventricles 3D surface. Automated landmark extraction is accomplished through the use of the self-organising network, the growing neural gas (GNG), which is able to topographically map the low dimensionality of the network to the high dimensionality of the contour manifold without requiring a priori knowledge of the input space structure. Moreover, our GNG landmark method is tolerant to noise and eliminates outliers. Our method accelerates the classical surface reconstruction and filtering processes. The proposed method offers higher accuracy compared to methods with similar efficiency as Voxel Grid.
Resumo:
Researchers want to analyse Health Care data which may requires large pools of compute and data resources. To have them they need access to Distributed Computing Infrastructures (DCI). To use them it requires expertise which researchers may not have. Workflows can hide infrastructures. There are many workflow systems but they are not interoperable. To learn a workflow system and create workflows in a workflow system may require significant effort. Considering these efforts it is not reasonable to expect that researchers will learn new workflow systems if they want to run workflows of other workflow systems. As a result, the lack of interoperability prevents workflow sharing and a vast amount of research efforts is wasted. The FP7 Sharing Interoperable Workflow for Large-Scale Scientific Simulation on Available DCIs (SHIWA) project developed the Coarse-Grained Interoperability (CGI) to enable workflow sharing. The project created the SHIWA Simulation Platform (SSP) to support CGI as a production-level service. The paper describes how the CGI approach can be used for analysis and simulation in Health Care.
Resumo:
Data registration refers to a series of techniques for matching or bringing similar objects or datasets together into alignment. These techniques enjoy widespread use in a diverse variety of applications, such as video coding, tracking, object and face detection and recognition, surveillance and satellite imaging, medical image analysis and structure from motion. Registration methods are as numerous as their manifold uses, from pixel level and block or feature based methods to Fourier domain methods. This book is focused on providing algorithms and image and video techniques for registration and quality performance metrics. The authors provide various assessment metrics for measuring registration quality alongside analyses of registration techniques, introducing and explaining both familiar and state–of–the–art registration methodologies used in a variety of targeted applications.
Resumo:
This paper presents work in progress, to develop an efficient and economic way to directly produce Technetium 99metastable (99mTc) using low-energy cyclotrons. Its importance is well established and relates with the increased global trouble in delivering 99mTc to Nuclear Medicine Departments relying on this radioisotope. Since the present delivery strategy has clearly demonstrated its intrinsic limits, our group decided to follow a distinct approach that uses the broad distribution of the low energy cyclotrons and the accessibility of Molybdenum 100 (100Mo) as the Target material. This is indeed an important issue to consider, since the system here presented, named CYCLOTECH, it is not based on the use of Highly Enriched (or even Low Enriched) Uranium 235 (235U), so entirely complying with the actual international trends and directives concerning the use of this potential highly critical material. The production technique is based on the nuclear reaction 100Mo (p,2n) 99mTc whose production yields have already been documented. Until this moment two Patent requests have already been submitted (the first at the INPI, in Portugal, and the second at the USPTO, in the USA); others are being prepared for submission on a near future. The object of the CYCLOTECH system is to present 99mTc to Nuclear Medicine radiopharmacists in a routine, reliable and efficient manner that, remaining always flexible, entirely blends with established protocols. To facilitate workflow and Radiation Protection measures, it has been developed a Target Station that can be installed on most of the existing PET cyclotrons and that will tolerate up to 400 μA of beam by allowing the beam to strike the Target material at an adequately oblique angle. The Target Station permits the remote and automatic loading and discharge of the Targets from a carriage of 10 Target bodies. On other hand, several methods of Target material deposition and Target substrates are presented. The object was to create a cost effective means of depositing and intermediate the target material thickness (25 - 100μm) with a minimum of loss on a substrate that is able to easily transport the heat associated with high beam currents. Finally, the separation techniques presented are a combination of both physical and column chemistry. The object was to extract and deliver 99mTc in the identical form now in use in radiopharmacies worldwide. In addition, the Target material is recovered and can be recycled.