Efficacy of low-level laser therapy on scar tissue

Background: Physiotherapy has a very important role in the maintenance of the integumentary system integrity. There is very few evidence in humans. Nevertheless, there are some studies about tissue regeneration using low-level laser therapy (LLLT). Aim: To analyze the effectiveness of LLLT on scar tissue. Methods: Seventeen volunteers were stratified by age of their scars, and then randomly assigned to an experimental group (EG) — n = 9 – and a placebo group (PG) – n = 8. Fifteen sessions were conducted to both the groups thrice a week. However, in the PG, the laser device was switched off. Scars’ thickness, length, width, macroscopic aspect, pain threshold, pain perception, and itching were measured. Results: After 5 weeks, there were no statistically significant differences in any variable between both the groups. However, analyzing independently each group, EG showed a significant improvement in macroscopic aspect (p = 0.003) using LLLT. Taking into account the scars’ age, LLLT showed a tendency to decrease older scars’ thickness in EG. Conclusion: The intervention with LLLT appears to have a positive effect on the macroscopic scars’ appearance, and on old scars’ thickness, in the studied sample. However, it cannot be said for sure that LLLT has influence on scar tissue.

Impact of vehicular traffic emissions on particulate-bound PAHs: levels and associated health risks

Considering vehicular transport as one of the most health‐relevant emission sources of urban air, and with aim to further understand its negative impact on human health, the objective of this work was to study its influence on levels of particulate‐bound PAHs and to evaluate associated health risks. The 16 PAHs considered by USEPA as priority pollutants, and dibenzo[a, l]pyrene associated with fine (PM2.5) and coarse (PM2.5–10) particles were determined. The samples were collected at one urban site, as well as at a reference place for comparison. The results showed that the air of the urban site was more seriously polluted than at the reference one, with total concentrations of 17 PAHs being 2240% and 640% higher for PM2.5 and PM2.5–10, respectively; vehicular traffic was the major emission source at the urban site. PAHs were predominantly associated with PM2.5 (83% to 94% of ΣPAHs at urban and reference site, respectively) with 5 rings PAHs being the most abundant groups of compounds at both sites. The risks associated with exposure to particulate PAHs were evaluated using the TEF approach. The estimated value of lifetime lung cancer risks exceeded the health‐based guideline levels, thus demonstrating that exposure to PM2.5‐bound PAHs at levels found at urban site might cause potential health risks. Furthermore, the results showed that evaluation of benzo[a] pyrene (regarded as a marker of the genotoxic and carcinogenic PAHs) alone would probably underestimate the carcinogenic potential of the studied PAH mixtures.

Modelling adhesive joints with cohesive zone models: effect of the cohesive law shape of the adhesive layer

Adhesively-bonded joints are extensively used in several fields of engineering. Cohesive Zone Models (CZM) have been used for the strength prediction of adhesive joints, as an add-in to Finite Element (FE) analyses that allows simulation of damage growth, by consideration of energetic principles. A useful feature of CZM is that different shapes can be developed for the cohesive laws, depending on the nature of the material or interface to be simulated, allowing an accurate strength prediction. This work studies the influence of the CZM shape (triangular, exponential or trapezoidal) used to model a thin adhesive layer in single-lap adhesive joints, for an estimation of its influence on the strength prediction under different material conditions. By performing this study, guidelines are provided on the possibility to use a CZM shape that may not be the most suited for a particular adhesive, but that may be more straightforward to use/implement and have less convergence problems (e.g. triangular shaped CZM), thus attaining the solution faster. The overall results showed that joints bonded with ductile adhesives are highly influenced by the CZM shape, and that the trapezoidal shape fits best the experimental data. Moreover, the smaller is the overlap length (LO), the greater is the influence of the CZM shape. On the other hand, the influence of the CZM shape can be neglected when using brittle adhesives, without compromising too much the accuracy of the strength predictions.

Uncertainty analysis based on sensitivity applied to angle-ply composite structures

This article describes a finite element-based formulation for the statistical analysis of the response of stochastic structural composite systems whose material properties are described by random fields. A first-order technique is used to obtain the second-order statistics for the structural response considering means and variances of the displacement and stress fields of plate or shell composite structures. Propagation of uncertainties depends on sensitivities taken as measurement of variation effects. The adjoint variable method is used to obtain the sensitivity matrix. This method is appropriated for composite structures due to the large number of random input parameters. Dominant effects on the stochastic characteristics are studied analyzing the influence of different random parameters. In particular, a study of the anisotropy influence on uncertainties propagation of angle-ply composites is carried out based on the proposed approach.

Consumption of ultra-processed foods and their impact on the diet of young adults

OBJECTIVE To evaluate the consumption of ultra-processed foods, its associated factors, and its influence on nutrient intake in young adults.METHODS In 2004-2005, the individuals belonging to the Pelotas birth cohort of 1982 were identified for a home interview. A total of 4,297 individuals were interviewed and 4,202 individuals were included in the study (follow-up rate of 77.4%). Diet was assessed using a questionnaire on dietary intake and the percentage of daily caloric intake attributed to ultra-processed foods as well as the intake of macro- and micronutrients were estimated. The association between cohort characteristics and the consumption of ultra-processed foods was assessed using linear regression. Analysis of variance and Pearson’s Chi-square test were used to evaluate the association between the quintiles of the consumption of ultra-processed food, nutrient intake and adequacy of nutrient intake, respectively.RESULTS The consumption of ultra-processed foods corresponded to 51.2% of the total caloric intake. The consumption of ultra-processed foods was higher among women, individuals with higher education, and individuals who were never poor and eutrophic. The increased consumption of ultra-processed foods was positively correlated with the consumption of fat, cholesterol, sodium, iron, calcium, and calories (p < 0.001) and was negatively correlated with the consumption of carbohydrates, protein, and dietary fiber (p < 0.001).CONCLUSIONS The high consumption of ultra-processed foods and its positive correlation with the intake of sodium, cholesterol, and fats underscores the need to perform interventions aimed at decreasing the intake of this food group.

Effects of oxidante acid treatments on carbon-templated hierarchical SAPO-11 materials: synthesis, characterization and catalytic evaluation in n-decane hydroiosomerization

Hierarchical SAPO-11 was synthesized using a commercial Merck carbon as template. Oxidant acid treatments were performed on the carbon matrix in order to investigate its influence on the properties of SAPO-11. Structural, textural and acidic properties of the different materials were evaluated by XRD, SEM, N-2 adsorption, pyridine adsorption followed by IR spectroscopy and thermal analyses. The catalytic behavior of the materials (with 0.5 wt.% Pt, introduced by mechanic mixture with Pt/Al2O3), were studied in the hydroisomerization of n-decane. The hierarchical samples showed higher yields in monobranched isomers than typical microporous SAPO-11, as a direct consequence of the modification on both porosity and acidity, the later one being the most predominant. (C) 2014 Elsevier B.V. All rights reserved.

Friction torque in grease lubricated thrust ball bearings

Thrust ball bearings lubricated with several different greases were tested on a modified Four-Ball Machine, where the Four-Ball arrangement was replaced by a bearing assembly. The friction torque and operating temperatures in a thrust ball bearing were measured during the tests. At the end of each test a grease sample was analyzed through ferrographic techniques in order to quantify and evaluate bearing wear. A rolling bearing friction torque model was used and the coefficient of friction in full film lubrication was determined for each grease, depending on the operating conditions. The experimental results obtained showed that grease formulation had a very significant influence on friction torque and operating temperature. The friction torque depends on the viscosity of the grease base oil, on its nature (mineral, ester, PAO, etc.), on the coefficient of friction in full film conditions, but also on the interaction between grease thickener and base oil, which affected contact replenishment and contact starvation, and thus influenced the friction torque.

A política agrícola comum (PAC) e o comércio internacional - estudo econométrico do efeito da PAC sobre as exportações agrícolas portuguesas para a União Europeia (1975-2012)

Dissertação apresentada ao Instituto Superior de Contabilidade e Administração do Porto para obtenção do Grau de Mestre em Empreendedorismo e Internacionalização Orientadora: Professora Doutora Maria Clara Ribeiro Coorientadora: Mestre Maria Luísa Verdelho Alves

Light memory operation based on a double pin SiC device

Experimental optoelectronic characterization of a p-i'(a-SiC:H)-n/pi(a-Si:H)-n heterostructure with low conductivity doped layers shows the feasibility of tailoring channel bandwidth and wavelength by optical bias through back and front side illumination. Front background enhances light-to-dark sensitivity of the long and medium wavelength range, and strongly quenches the others. Back violet background enhances the magnitude in short wavelength range and reduces the others. Experiments have three distinct programmed time slots: control, hibernation and data. Throughout the control time slot steady light wavelengths illuminate either or both sides of the device, followed by the hibernation without any background illumination. The third time slot allows a programmable sequence of different wavelengths with an impulse frequency of 6000Hz to shine upon the sensor. Results show that the control time slot illumination has an influence on the data time slot which is used as a volatile memory with the set, reset logical functions. © IFIP International Federation for Information Processing 2015.

Risk Acceptance in the Furniture Sector: Analysis of Acceptance Level and Relevant Influence Factors

Risk acceptance has been broadly discussed in relation to hazardous risk activities and/or technologies. A better understanding of risk acceptance in occupational settings is also important; however, studies on this topic are scarce. It seems important to understand the level of risk that stakeholders consider sufficiently low, how stakeholders form their opinion about risk, and why they adopt a certain attitude toward risk. Accordingly, the aim of this study is to examine risk acceptance in regard to occupational accidents in furniture industries. The safety climate analysis was conducted through the application of the Safety Climate in Wood Industries questionnaire. Judgments about risk acceptance, trust, risk perception, benefit perception, emotions, and moral values were measured. Several models were tested to explain occupational risk acceptance. The results showed that the level of risk acceptance decreased as the risk level increased. High-risk and death scenarios were assessed as unacceptable. Risk perception, emotions, and trust had an important influence on risk acceptance. Safety climate was correlated with risk acceptance and other variables that influence risk acceptance. These results are important for the risk assessment process in terms of defining risk acceptance criteria and strategies to reduce risks.

Relação entre a catastrofização da dor, percepção da intensidade da dor e incapacidade funcional em utentes com cdor crónica cervical

RESUMO: Introdução/Objectivo: A influência dos factores psicossociais, e nomeadamente da catastrofização da dor, na percepção da intensidade da dor e na incapacidade funcional, auto-reportada por indivíduos com dor crónica cervical (DCC), tem sido alvo de estudo em vários países, evidenciando o constructo multidimensional da DCC. Neste sentido, esta investigação pretende estudar se a catastrofização da dor, é uma variável preditiva relativamente à percepção da intensidade da dor, e à incapacidade funcional. Secundariamente procurou-se averiguar se as relações encontradas se mantêm estáveis antes e após exposição a uma intervenção em fisioterapia. Metodologia: Neste estudo participaram 40 indivíduos com DCC de origem músculo-esquelética e causa não traumática, que foram expostos a uma intervenção em fisioterapia no Centro de Medicina de Reabilitação do Alcoitão e na Clinica AlcaisFisio, que cumpriram os critérios de inclusão e aceitarem participar livremente no mesmo. A recolha de dados realizou-se em dois momentos distintos, antes e após exposição à intervenção em fisioterapia. A catastrofização da dor foi avaliada por meio da Escala de Catastrofização da Dor (PCS), a intensidade da dor pela Escala Numérica da Dor (END), sendo realizada a medição da incapacidade funcional através do Neck Disability Index versão Portuguesa (NDI-PT). A análise estatística incluiu duas fases: fase descritiva e fase inferencial. Foram desenvolvidos modelos de regressão linear com vista a testar o poder preditivo da catastrofização da dor sobre a intensidade da dor e a incapacidade funcional. O nível de significância para o qual os valores se consideraram satisfatórios foi de p<0,05. O tratamento dos dados foi realizado no software PASW versão 18. Resultados: Observou-se que existe uma relação moderada, positiva e significativa, nos dois momentos de avaliação, entre a catastrofização da dor e a percepção da intensidade da dor (p<0,001), apresentando um poder preditivo de 27,9% e 46,7%, das pontuações da intensidade da dor, antes e após exposição à intervenção em fisioterapia, espectivamente. Observou-se que a catastrofização da dor tem uma relação forte, positiva e significativa com a incapacidade funcional, nos dois momentos de avaliação (p<0,001), predizendo 51,8% e 61,8%, das pontuações da incapacidade funcional, antes e após exposição à intervenção em fisioterapia, respectivamente. Conclusão: A catastrofização da dor é um factor psicossocial que apresenta relação moderada com a percepção da intensidade da dor, e forte com a incapacidade funcional auto-reportada por indivíduos com DCC de origem músculo-esquelética e causa não traumática, antes e após exposição à intervenção em fisioterapia. Os resultados do estudo sugerem, assim, uma importante influência da catastrofização da dor sobre a percepção da intensidade da dor e a incapacidade funcional em indivíduos com DCC, realçando o constructo multidimensional da DCC. ------------ABSTRACT: Background and Purpose: The influence of psychosocial factors, particularly, the pain catastrophizing, on pain intensity and functional disability in individuals with chronic neck pain (CNP) has been report among recent research literature. The first aim of this research was to verify the predictive value of pain catastrophizing on pain intensity and patient’s functional disability. Secondly it aimed to verify the stability of these relations before and after a physiotherapy treatment. Methodology: A sample of 40 subjects with CNP of musculoskeletal and non-traumatic causes was recruited from the patient’s list of two private clinics in Lisbon district following verification of the inclusion criteria. All participants agree to participate in the study and signed a consent form. Data was collected immediately before and after a period of physiotherapy treatment. Pain catastrophizing was assessed by the Pain Catastrophizing Scale (PCS-PT), patient perception of pain intensity was measured by the Numerical Rating Scale (NRS), and functional disability was measured through the Neck Disability Index (NDI-PT). Data was analyzed through descriptive and inferential statistics. Linear regression models were developed in order to test the predictive power of pain catastrophizing on pain intensity and functional disability. The minimal level of significance established was p<0,05. Data analysis was performed using the software PASW version 18. Results: A positive moderate relationship between pain catastrophizing and pain intensity was founded in both moments, before and after physiotherapy intervention, of data collection (p<0,001) with a predictive power of 27,9% and 46,7%, respectively. A positive strong relationship between pain catastrophizing and functional disability was founded in both moments, before and after physiotherapy intervention, of data collection (p<0,001), with a predictive power of 51,8% and 61,8%, respectively. Conclusion: Pain catastrophizing is a psychosocial factor that is correlated moderately with the perception of pain intensity and strongly with self-reported functionaldisability for individuals with CNP musculoskeletal origin and non-traumatic causes,before and after a physiotherapy intervention. The results of this study suggest that pain catastrophizing has an important influence on the report levels of pain intensity and functional disability in CNP patients. These results also emphasize the multidimensional nature of chronic neck pain.

Electrical Skin Phenomena: A Fractional Calculus Analysis

The internal impedance of a wire is the function of the frequency. In a conductor, where the conductivity is sufficiently high, the displacement current density can be neglected. In this case, the conduction current density is given by the product of the electric field and the conductance. One of the aspects the high-frequency effects is the skin effect (SE). The fundamental problem with SE is it attenuates the higher frequency components of a signal. The SE was first verified by Kelvin in 1887. Since then many researchers developed work on the subject and presently a comprehensive physical model, based on the Maxwell equations, is well established. The Maxwell formalism plays a fundamental role in the electromagnetic theory. These equations lead to the derivation of mathematical descriptions useful in many applications in physics and engineering. Maxwell is generally regarded as the 19th century scientist who had the greatest influence on 20th century physics, making contributions to the fundamental models of nature. The Maxwell equations involve only the integer-order calculus and, therefore, it is natural that the resulting classical models adopted in electrical engineering reflect this perspective. Recently, a closer look of some phenomas present in electrical systems and the motivation towards the development of precise models, seem to point out the requirement for a fractional calculus approach. Bearing these ideas in mind, in this study we address the SE and we re-evaluate the results demonstrating its fractional-order nature.

The effect of water inorganic matrix in ibuprofen adsorption onto activated carbon for water and wastewater treatment

Dissertação para obtenção do Grau de Mestre em Engenharia Química e Bioquímica

HRM specificities’ on Portugal hotel units

This paper presents the main Human Resources Management (HRM) specificities’ on Portuguese hotel units. We try to understand the role of HRM on behavior of co-workers and quality service in hotel units and to know the future tendency of human capital profile on Portuguese hotel units and the role of HRM function on management of their staff. We, also, try to explore if Portuguese culture has influence on HRM specificities’ of hotel units. This phenomenon has a special relevance in the Portuguese context, because this country is known a growing process of tourism industry in recent years. Furthermore, little is known about HRM department’ contributions to their human capital management and development. This paper is one of the first to focus specifically on Portuguese hotel units and it also seeks to present findings that stem from the Human Resources Managers’ perspective. The paper is based on qualitative case studies. The data were collected through semi-structured interviews of 12 human resource managers from 12 hotel units located in Portugal. The results show that although there is not an effective HRM, current HRM practices are enough to encouraging pro-environmental behavior in their staff and they have a direct effect on customer satisfaction and competitiveness of sector. However, managers recognize there is need introduce some change on short-term to promote a better performance of staff with effect on customers satisfaction and competitiveness on sector in Portugal. According to these results, the paper discusses the major theoretical and practical implications.

RISK FACTORS OF HIV-1 VERTICAL TRANSMISSION (VT) AND THE INFLUENCE OF ANTIRETROVIRAL THERAPY (ART) IN PREGNANCY OUTCOME

In the absence of intervention, the rate of vertical transmission of HIV can range from 15-45%. With the inclusion of antiretroviral drugs during pregnancy and the choice of delivery route this amounts to less than 2%. However ARV use during pregnancy has generated several questions regarding the adverse effects of the gestational and neonatal outcome. This study aims to analyze the risk factors for vertical transmission of HIV-1 seropositive pregnant women living in Rio Grande and the influence of the use of ARVs in pregnancy outcome. Among the 262 pregnant women studied the rate of vertical transmission of HIV was found to be 3.8%. Regarding the VT, there was a lower risk of transmission when antiretroviral drugs were used and prenatal care was conducted at the referral service. However, the use of ART did not influence the outcome of pregnancy. However, initiation of prenatal care after the first trimester had an influence on low birth weight, as well as performance of less than six visits increased the risk of prematurity. Therefore, the risk factors analyzed in this study appear to be related to the realization of inadequate pre-natal and maternal behavior.